Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “mixed phase”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Observational Signatures of Transverse Magnetohydrodynamic Waves and Associated Dynamic Instabilities in Coronal Flux Tubes

Magnetohydrodynamic (MHD) waves permeate the solar atmosphere and constitute potential coronal heating agents. Yet, the waves detected so far may be but a small subset of the true existing wave power. Detection is limited by instrumental constraints but also by wave processes that localize the wave power in undetectable spatial scales. In this study, we conduct 3D MHD simulations and forward modeling of standing transverse MHD waves in coronal loops with uniform and non-uniform temperature variation in the perpendicular cross-section. The observed signatures are largely dominated by the combination of the Kelvin–Helmholtz instability (KHI), resonant absorption, and phase mixing. In the presence of a cross-loop temperature gradient, we find that emission lines sensitive to the loop core catch different signatures compared to those that are more sensitive to the loop boundary and the surrounding corona, leading to an out-of-phase intensity and Doppler velocity modulation produced by KHI mixing. In all of the considered models, common signatures include an intensity and loop width modulation at half the kink period, a fine strand-like structure, a characteristic arrow-shaped structure in the Doppler maps, and overall line broadening in time but particularly at the loop edges. For our model, most of these features can be captured with a spatial resolution of 0.″33 and a spectral resolution of 25 km s{sup −1}, although we do obtain severe over-estimation of the line width. Resonant absorption leads to a significant decrease of the observed kinetic energy from Doppler motions over time, which is not recovered by a corresponding increase in the line width from phase mixing and KHI motions. We estimate this hidden wave energy to be a factor of 5–10 of the observed value.

79 ASTRONOMY AND ASTROPHYSICS↗

Flow regime and Reynolds number variation effects on the mixing behavior of parallel flows

The hydraulic single-phase mixing of three parallel rectangular channels is experimentally investigated at various Reynolds numbers (Re) and flow regime combinations. Particle Image Velocimetry results for seven mixing cases are presented and discussed with varying Re combinations ranging from 1,824 to 20,844. While all cases result in the same Re ratio of ~0.69 between the inner and outer flows, two cases represent multi-regime mixing with the inner-outer regime pair of laminar-transitional and transitional-turbulent, while the other 5 cases are all characteristic of turbulent mixing with varying levels of turbulence. The outer channels initially share characteristics with a backward facing step. The center channel is found to initially behave like a slot jet, but then sees a significant increase in velocity decay. This inner flow velocity decay increased dramatically in the laminar-transitional mixing case, whose centerline velocity decay was ~6 times larger than the decay in the turbulent mixing cases. Second order statistics revealed a consistent mixing layer thickness of ~0.1 hydraulic diameters for all the cases but showed more intense shearing in the multi-regime mixing cases. The combined point and thereby the mixing layer length is determined using centerline velocity decay profiles, which show a much more aggressive mixing in multi-regime flows. Multi-regime mixing demonstrated superior characteristics relative to turbulent mixing due to a more dramatic velocity decay in the inner flow and a shorter mixing length. The contributions of this work include communicating the benefits of multi-regime mixing and providing detailed characterization efforts that can serve future efforts for validating computational models. Here this research also lays the groundwork for future studies aimed at achieving high levels of mixing without a severe penalty in pressure drop.

42 ENGINEERING↗

Modification of Particle Distributions By MHD Instabilities I

The modification of particle distributions by low amplitude magnetohydrodynamic modes is an important topic for magnetically confined plasmas. Low amplitude modes are known to be capable of producing significant modification of injected neutral beam profiles, and the same can be expected in burning plasmas for the alpha particle distributions. Flattening of a distribution due to phase mixing in an island or due to portions of phase space becoming stochastic is a process extremely rapid on the time scale of an experiment but still very long compared to the time scale of guiding center simulations. Thus it is very valuable to be able to locate significant resonances and to predict the final particle distribution produced by a given spectrum of magnetohydrodynamic modes. In this paper we introduce a new method of determining domains of phase space in which good surfaces do not exist and use this method for quickly determining the final state of the particle distribution without carrying out the full time evolution leading to it.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Anisotropic N=4 Super-Yang-Mills Plasma and Its Instabilities

We present a type-IIB supergravity solution dual to a spatially anisotropic finite-temperature N=4 super-Yang-Mills plasma. The solution is static and completely regular. The full geometry can be viewed as a renormalization group flow from an ultraviolet anti-de Sitter geometry to an infrared Lifshitz-like geometry. The anisotropy can be equivalently understood as resulting from a position-dependent {theta} term or from a nonzero number density of dissolved D7-branes. The holographic stress tensor is conserved and anisotropic. The presence of a conformal anomaly plays an important role in the thermodynamics. The phase diagram exhibits homogeneous and inhomogeneous (i.e., mixed) phases. In some regions the homogeneous phase displays instabilities reminiscent of those of weakly coupled plasmas. We comment on similarities with QCD at finite baryon density and with the phenomenon of cavitation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Distribution system model calibration with big data from AMI and PV inverters

Efficient management and coordination of distributed energy resources with advanced automation schemes requires accurate distribution system modeling and monitoring. Big data from smart meters and photovoltaic (PV) micro-inverters can be leveraged to calibrate existing utility models. This paper presents computationally efficient distribution system parameter estimation algorithms to improve the accuracy of existing utility feeder radial secondary circuit model parameters. The method is demonstrated using a real utility feeder model with advanced metering infrastructure (AMI) and PV micro-inverters, along with alternative parameter estimation approaches that can be used to improve secondary circuit models when limited measurement data is available. Lastly, the parameter estimation accuracy is demonstrated for both a three-phase test circuit with typical secondary circuit topologies and single-phase secondary circuits in a real mixed-phase test system.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Understanding the Applicability of Gas/Particle Partitioning Theory to SOA using Novel Chemically-Speciated Partitioning Measurements (Final Report)

The main objective of this research grant project was to investigate the physical-chemical processes and properties of particles and partitioning gases that influence gas/particle (G/P) partitioning and timescales for equilibration, to directly determine the conditions under which equilibrium G/P partitioning theory can be applied to secondary organic aerosol (SOA). SOA constitutes a major component of submicron particles in the atmosphere, which have important implications for air quality, human and ecosystem health, radiation balance, and climate; however SOA formation, evolution and losses are not well understood. Use of novel on-line measurements of chemically-speciated partitioning measurements of both gas-phase and particle-phase components was a central component to advancing these scientific goals. The key approach was to conduct environmental chamber studies with systems of increasing complexity to determine G/P partitioning rates and equilibrium states for chemically-speciated SOA components. The project builds on our previous work on gas-wall partitioning that must be understood in order to study G/P partitioning in chambers, and to help extrapolate the results to be atmospherically relevant. The goal was to employ measurements and modeling to systematically determine when G/P partitioning theory accurately describes the distribution of oxidized organic compounds in the gas and aerosol phases, and when and why it does not (e.g., aerosol phase-state kinetic limitations, non-ideal mixing, phase separation, oligomer formation,), for chemical and physical conditions typically found throughout the continental boundary layer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ice-Crystal Fallstreaks from Supercooled Liquid Water Parent Clouds

On 31 December 2001, ice-crystal fallstreaks (e.g., cirrus uncinus, or colloquially "Mare's Tails") from supercooled liquid water parent clouds were observed by ground-based lidars pointed vertically from the Atmospheric Radiation Measurement Southern Great Plains (SGP) facility near Lamont, Oklahoma. The incidence of liquid phase cloud with apparent ice-phase precipitation is investigated. Scenarios for mixed-phase particle nucleation, and fallstreak formation and sustenance are discussed. The observations are unique in the context of the historical reverence given to the commonly observed c h s uncinus fallstreak (wholly ice) versus this seemingly contradictory coincidence of liquid water begetting ice-crystal streaks.

Campbell, James R.↗

Overview and Statistical Analysis of Boundary Layer Clouds and Precipitation Over the Western North Atlantic Ocean

Due to their fast evolution and large natural variability in macro- and microphysical properties, the accurate representation of boundary layer clouds in current climate models remains a challenge. One of the regions with large intermodel spread in the Coupled Model Intercomparison Project Phase 6 ensemble is the western North Atlantic Ocean. Here, statistically representative in situ measurements can help to develop and constrain the parameterization of clouds in global models. To this end, we performed comprehensive measurements of boundary layer clouds, aerosol, trace gases, and radiation in the western North Atlantic Ocean during the NASA Aerosol Cloud meTeorology Interactions oVer the western ATlantic Experiment (ACTIVATE) mission. In total, 174 research flights with 574 flight hours for cloud and precipitation measurements were performed with the HU-25 Falcon during three winter (February–March 2020, January–April 2021, and November 2021–March 2022) and three summer seasons (August–September 2020, May–June 2021, and May–June 2022). Here we present a statistical evaluation of 16 140 individual cloud events probed by the fast cloud droplet probe and the two-dimensional stereo cloud probe during 155 research flights in a representative and repetitive flight strategy allowing for robust statistical data analyses. We show that the vertical profiles of distributions of the liquid water content and the cloud droplet effective diameter (ED) increase with altitude in the marine boundary layer. Due to higher updraft speeds, higher cloud droplet number concentrations (N liquid ) were measured in winter compared to summer despite lower cloud condensation nucleus abundance. Flight cloud cover derived from statistical analysis of in situ data is reduced in summer and shows large variability. This seasonal contrast in cloud coverage is consistent with a dominance of a synoptic pattern in winter that favors conditions for the formation of stratiform clouds at the western edge of cyclones (post-cyclonic). In contrast, a dominant summer anticyclone is concomitant with the occurrence of shallow cumulus clouds and lower cloud coverage. The evaluation of boundary layer clouds and precipitation in the N liquid ED phase space sheds light on liquid, mixed-phase, and ice cloud properties and helps to categorize the cloud data. Ice and liquid precipitation, often masked in cloud statistics by a high abundance of liquid clouds, is often observed throughout the cloud. The ACTIVATE in situ cloud measurements provide a wealth of cloud information useful for assessing airborne and satellite remote-sensing products, for global climate and weather model evaluations, and for dedicated process studies that address precipitation and aerosol–cloud interactions.

Aerosol↗

A Highly Miniaturized Cloud and Aerosol Instrument Package for Small UAS's

Unmanned Aerial Systems (UAS’s), which include Unmanned Aerial Vehicles (UAV’s) and tethered balloon systems (TBS) offer significant advantages over conventional research aircraft. They are capable of long-duration measurements of cloud properties in regions where piloted aircraft are unsafe, e.g., at very low altitudes over remote regions, such as tundra and open ocean. TBS and UAV’s are now widely recognized as a technology that can provide unprecedented insights into cloud and radiation processes, but development of miniature sensors capable of providing sophisticated measurements of cloud, aerosol and radiative properties lag behind. In Phase II of this SBIR research, Stratton Park Engineering Company, Inc. (SPEC) designed and fabricated a miniature combination optical particle probe (micro-COPP) that is capable of being flown on small UAV’s and TBS. The micro-COPP measures the size distribution of cloud particles from 2 microns to several millimeters and records high-definition images that distinguish ice particle from water drops, which is essential in mixed-phase clouds. The micro-COPP was installed along with miniature instruments to measure aerosols, cloud condensation nuclei, position and atmospheric state parameters on a small UAV and TBS that were deployed in the Arctic at the Ny-Ålesund, Svalbard (78° N. latitude).

54 ENVIRONMENTAL SCIENCES↗

Supercooled Liquid Water Detection Capabilities from Ka-Band Doppler Profiling Radars: Moment-Based Algorithm Formulation and Assessment

The occurrence of supercooled liquid water in mixed-phase cloud (MPC) affects their cloud microphysical and radiative properties. The prevalence of MPCs in the mid- and high latitudes translates these effects to significant contributions to Earth’s radiative balance and hydrological cycle. The current study develops and assesses a radar-only, moment-based phase partition technique for the demarcation of supercooled liquid water volumes in arctic, MPC conditions. The study utilizes observations from the Ka band profiling radar, the collocated high spectral resolution lidar, and ambient temperature profiles from radio sounding deployments following a statistical analysis of 5.5 years of data (January 2014–May 2019) from the Atmospheric Radiation Measurement observatory at the North Slope of Alaska. The ice/liquid phase partition occurs via a per-pixel, neighborhood-dependent algorithm based on the premise that the partitioning can be deduced by examining the mean values of locally sampled probability distributions of radar-based observables and then compare those against the means of climatologically derived, per-phase probability distributions. Analyzed radar observables include linear depolarization ratio (LDR), spectral width, and vertical gradients of reflectivity factor and radial velocity corrected for vertical air motion. Results highlight that the optimal supercooled liquid water detection skill levels are realized for the radar variable combination of spectral width and reflectivity vertical gradient, suggesting that radar-based polarimetry, in the absence of full LDR spectra, is not as critical as Doppler capabilities. The cloud phase masking technique is proven particularly reliable when applied to cloud tops with an Equitable Threat Score (ETS) of 65%; the detection of embedded supercooled layers remains much more uncertain (ETS = 27%).

54 ENVIRONMENTAL SCIENCES↗

Characterizing the nonequilibrium response of FeRh thin films using time-domain thermoreflectance

Time-domain thermoreflectance (TDTR) characterization of FeRh throughout its first-order antiferromagnetic (AF) to ferromagnetic (FM) transition shows that the transient reflectance ΔR⁡(t)/R strongly depends on the magnetic order of the sample. Using TDTR, which uses optical pulses to induce small temperature excursions, we have found that Δ⁢R⁡(t)/R of the AF phase exhibits a large negative response, while the response of the FM phase is positive. This magnetic phase sensitivity has allowed us to study the transient response of both the AF and FM phases to the pump-pulse excitation and the mixed phase of the material. These results are significant since the ultrafast properties of antiferromagnetic materials and mixed antiferromagnetic and ferromagnetic materials are difficult to detect using other conventional techniques. We have found that the AF phase exhibits a strong subpicosecond decaying signal not observed in the FM phase. The magnetic phase dependence of the sign of Δ⁢R⁡(t)/R is qualitatively explained using the results of ab initio density functional theory calculations. Using the two-temperature model, we found that the change in the thermalization time across the transition is caused by differences in both the electronic heat capacity and the electron-phonon coupling factor of the AF and FM phases. The electron-phonon coupling constant in the AF phase is also determined using the two-temperature model conducted using the ntmpy code package. For the FM phase, we provide boundaries for the magnitude of the electron-phonon coupling factor for the FM phase. Finally, these results indicate that TDTR can be used to study the transient properties of magnetic materials that are otherwise challenging to probe.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Halide Ion Migration in Perovskite Nanocrystals and Nanostructures

The optical and electronic properties of metal halide perovskites provide insight into the operation of solar cells as well as their long-term operational stability. Halide mobility in perovskite films is an important factor influencing solar cell performance. One can visualize halide ion migration through halide exchange between two nanocrystal suspensions or between physically paired films of two different metal halide perovskites. The ability to tune band gap by varying halide ratios (Cl:Br or Br:I) allows the synthesis of mixed halide perovskites with tailored absorption and emission across the entire visible spectrum. Interestingly, mixed halide (e.g., MAPb(Br 0.5 I 0.5 ) 3 ) films undergo phase segregation to form Br-rich and I-rich sites under steady state illumination. Upon halting illumination, segregated phases mix to restore original mixed halide compositions. Introducing multiple cations (Cs, formamidinium) at the A site or alloying with Cl greatly suppresses halide mobilities. Long-term irradiation of MAPb(Br 0.5 I 0.5 ) 3 films also cause expulsion of iodide leaving behind Br-rich phases. Hole trapping at I-rich sites in MAPb(Br 0.5 I 0.5 ) 3 is considered to be an important step in inducing halide mobility in photoirradiated films. Finally, this Account focuses on halide ion migration in nanocrystals and nanostructured films driven by entropy of mixing in dark and phase segregation under light irradiation.

14 SOLAR ENERGY↗

Rationalizing the light-induced phase separation of mixed halide organic–inorganic perovskites

Mixed halide hybrid perovskites, CH 3 NH 3 Pb(I 1-x Brx) 3' represent good candidates for lowcost, high efficiency photovoltaic, and light-emitting devices. Their band gaps can be tuned from 1.6 to 2.3 eV, by changing the halide anion identity. Unfortunately, mixed halide perovskites undergo phase separation under illumination. This leads to iodide- and bromide-rich domains along with corresponding changes to the material’s optical/electrical response. Here, using combined spectroscopic measurements and theoretical modeling, we quantitatively rationalize all microscopic processes that occur during phase separation. Our model suggests that the driving force behind phase separation is the bandgap reduction of iodiderich phases. It additionally explains observed non-linear intensity dependencies, as well as self-limited growth of iodide-rich domains. Most importantly, our model reveals that mixed halide perovskites can be stabilized against phase separation by deliberately engineering carrier diffusion lengths and injected carrier densities.

36 MATERIALS SCIENCE↗

Preparation and Initial Characterization of Fluidized Bed Steam Reforming Pure-Phase Standards

Hanford is investigating the Fluidized Bed Steam Reforming (FBSR) process for their Low Activity Waste. The FBSR process offers a low-temperature continuous method by which liquid waste can be processed with the addition of clay into a sodium aluminosilicate (NAS) waste form. The NAS waste form is mainly comprised of nepheline (NaAlSiO 4 ), sodalite (Na 8 [AlSiO 4 ] 6 Cl 2 ), and nosean (Na 8 [AlSiO 4 ] 6 SO 4 ). Anions such as perrhenate (ReO 4 - ), pertechnetate (TcO 4 - ), and iodine (I - ) are expected to replace sulfate in the nosean structure and/or chloride in the sodalite mineral structure (atomically bonded inside the aluminosilicate cages that these mineral structures possess). In the FBSR waste form, each of these phases can exist in a variety of solid solutions that differ from the idealized forms observed in single crystals in nature. The lack of understanding of the durability of these stoichiometric or idealized mineral phases complicates the ability to deconvolute the durability of the mixed phase FBSR product since it is a combination of different NAS phases. To better understand the behavior, fabrication and testing of the individual phases of the FBSR product is required. Analytical Development (AD) of the Science and Technology directorate of the Savannah River National Laboratory (SRNL) was requested to prepare the series of phase-pure standards, consisting of nepheline, nosean, and Cl, Re, and I sodalite. Once prepared, X-ray Diffraction (XRD) analyses were used to confirm the products were phase pure. These standards are being used for subsequent characterization studies consisting of the following: single-pass flow-through (SPFT) testing, development of thermodynamic data, and x-ray diffraction (XRD) calibration curves. In addition to the above mentioned phase-pure standards, AD was tasked with fabricating a mixed Tc-Re sodalite.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Early Stages in the Lifecycle of Polar Liquid-Bearing Clouds

Stratiform liquid-bearing clouds are ubiquitous over the polar regions, where they are predominantly mixed-phase. These polar clouds induce substantial radiative forcing on the surface and continuously modify the atmospheric thermodynamic budget, with direct implications for the polar ice pack resilience. However, the physical representation of these clouds is still a major challenge for climate models. A significant part of polar liquid-bearing cloud lifecycle is often manifested in a quasi-steady self-sustaining, persistent, and turbulent state, which is driven by longwave cloud radiative cooling and can last for multiple days. This self-sustaining cloud lifecycle stage has been thoroughly investigated in numerous studies, though some of its aspects such as precipitation still lack robust quantification and evaluation. The preceding cloud lifecycle stages, which may last up to several hours, have nonetheless remained widely overlooked. These preceding stages initiate at cloud formation, often in a stable and non-turbulent atmospheric layer and serve as a key junction between cloud persistence and cloud dissipation. These two contrasting cloud lifecycle trajectories pose the question if general circulation models (GCMs) can capture the full lifecycle accurately for the real physical reasons, a necessary condition to improve our confidence in climate projections given the changing polar climate. The purpose of this project was to improve the characterization and understanding of these early stages in the lifecycle of polar stratiform liquid-bearing cloud and to aid their representation in GCMs. This research relied on measurements from the Multidisciplinary drifting Observatory for the Study of Arctic Climate (MOSAiC) field campaign, as well as the observations from the ARM West Antarctic Radiation Experiment (AWARE) and the permanent ARM site at Utqiagvik, North Slope of Alaska (NSA).

58 GEOSCIENCES↗

Boundary-Layer Cloud Modeling Challenges on the North Slope of Alaska

The accurate modeling and prediction of cloud base heights is critical for energy balance calculations and aviation operations, alike. Low-level (i.e., boundary-layer) Arctic clouds can be difficult to model, making prediction of formation and dissipation challenging. Primarily mixed-phase, these clouds typically contain low quantities of supercooled liquid water and often slowly precipitate relatively small amounts of moderately and heavily rimed snow particles. While this appears to be the predominant cloudy state on the North Slope of Alaska (NSA), the delicate balance of microphysical, dynamical, radiative, surface coupling, and advective processes can rapidly shift to heavy snow (with various degrees of riming) or to a complete dissipation of the cloud layer without any precipitation, depending on the dominant processes. Here we strive to disentangle these various processes. First, we compare the predictive performances of four different numerical weather models in forecasting the presence and base-heights of low-level clouds: the High-Resolution Rapid Refresh - Alaska (HRRR-AK) model, the Polar Weather Research and Forecasting (Polar WRF) model, the Unified Model (UM), and the European Centre for Medium-range Weather Forecasting (ECMWF) model. Initial results comparing model output at two U.S. Department of Energy Atmospheric Radiation Measurement (AMT) NSA sites, during the fall season in 2019 and 2022, show that the UM slightly outperforms the HRRR-AK in terms of accurately forecasting the presence of a low-level cloud layer (89% of the time). All models have a significant bias of 300 to 800 meters in forecasting cloud base height (lower than is observed); however, the UM and ECMWF models have the lowest biases. Finally, a case study for a particularly challenging April 2017 thin-cloud event is presented, wherein we compare the performance of four different bulk microphysical parameterization schemes using a higher-resolution large eddy simulation (LES) model, the WRF-LES. Initial results show that the Thompson scheme was the only one able to reproduce and sustain a substantial supercooled liquid layer, but it was unable to reproduce the transition from a deep, liquid-rich cloud to a thin layer with moderately and heavily rimed precipitation. This is the first step in linking simulated LES-scale riming processes with those parameterized at a coarser mesoscale model scale. This has important implications for forecasting low-level clouds in an operational environment, given the efficiency of the riming process.

cloud base heights↗

S-waves and the measurement of CP violating phases in B{sub s} decays

Heavy, as yet undiscovered particles, can affect measurements of CP violation in the B system. Measuring CP violation in the B{sub s} system provides an excellent place to observe such effects since standard model sources are predicted to produce very small effects. The angle -2{beta}{sub s}, the 'phase of B{sub s}-B{sub s} mixing', thought to be best measured in B{sub s}{yields}J/{psi}{phi} decays is of order -0.04, while the CP violating asymmetry in B{sub s}{yields}{phi}{phi} is predicted to be zero, due to the cancellation of the mixing phase with the decay phase. Recent measurements of {beta}{sub s} in J/{psi}{phi}, while not definitive, are much larger than the standard model predictions. Measurements in the B{sup 0} and D{sub s}{sup +} systems of analogous modes point toward a 5-10% contamination of S-wave K{sup +}K{sup -} under the {phi} peak. This S-wave was not taken into account in these recent analyses. Furthermore this S-wave can also materialize as a f{sub 0}(980) meson that decays to {pi}{sup +}{pi}{sup -}, making the final state J/{psi}f{sub 0} useful for measuring {beta}{sub s} with the added advantage of not requiring an angular analysis. Rate estimates, while not precise, predict four to five times fewer such events than those in the J/{psi}{phi} mode. The error on {beta}{sub s}, however, may be similar. We also remark on S-wave problems with the B{sub s}{yields}{phi}{phi} mode, and possible systematic checks using B{sub s}{yields}{phi}f{sub 0}.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗