Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “maturation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Adaptive simulations enable computational design of electron beam processing of nanomaterials with supersonic micro-jet precursor

Focused Electron Beam Induced Processing (FEBIP) is a powerful tool for the “direct-write” of nanomaterials with the possibility of atomistic control on suspended 2D material substrates. FEBIP capabilities have been significantly expanded by using a localized jet-based delivery of precursors, and especially when a thermally energized supersonic micro-jet enhances the delivery of mass flux along with controlling the far-from-equilibrium thermodynamic state of adsorbed adatoms. The possibilities of growing nanomaterials with “dialed-in” composition with ultra-high growth rates and aspect ratios up to 100:1 have been demonstrated using the supersonic micro-jet-FEBIP. Bringing this scientific discovery to the level of maturity required for practical applications in additive nanomanufacturing requires simulation tools that are capable of capturing the complex flow physics of micro-jet-substrate interactions that bridge a wide range of flow regimes from the high-density gas micro-jet expanding into the vacuum environment of FEBIP. To address this significant computational challenge, a new approach has been developed and described in this work for a multiscale adaptive DSMC (Direct Simulation Monte Carlo) algorithm to predict the micro-jet gas dynamics in an FEBIP environment, spanning the full range of flow regimes from low Knudsen (Kn) number O(0.01) continuum flow to high Kn of O(10) for the molecular flow within a unified computational framework. Here, the fundamental principles of the adaptive DSMC algorithm are described, its viability as a DSMC technique is demonstrated, and computational improvements for the benchmark cases are discussed in the context of advancing 3D nanofabrication with FEBIP. Ultimately, combining the first principle simulations via adaptive DSMC with the complementary experimental data will enable the creation of the powerful CAD tools for in silico design and optimal operation of micro-jet-FEBIP.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Computational studies of impurity migration during induction stirring of molten uranium

Understanding and controlling impurity behavior in actinide metal casting processes are foundational for efficient part production yet remain major challenges for researchers and industry. To help provide insight regarding impurity distribution during actinide metal casting, we have developed computational fluid dynamics (CFD) models for a laboratory-scale system using commercial and open-source code. Multiple simulation frameworks allow for improved confidence in the resulting outputs, while taking advantage of the maturity and convenience offered by commercial platforms and simultaneously maintaining the transparency and flexibility often provided by open-source software. Here, we describe multiple experiment-informed models designed to simulate a specific laboratory system in which uranium melt, containing a known starting concentration of carbon impurity, is electromagnetically stirred in an induction furnace. Here, the goal of the simulations is to predict the motion of uranium carbide microparticles in the velocity field of the melt. Prior to simulating the uranium-carbon system, numerical models were validated using a previously published nonradioactive experimental system. Effects of the size and shape of impurity particles in the models were investigated and agree with experimental findings. Simulation of smaller particles (< 50 µm) shows more homogenous distribution throughout the stirred melt. With increased particle size (100 µm), the body forces, which include the buoyancy force, dominate over the drag force, causing larger particles to move toward the crucible walls and upward in the system.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Chemical timescale effects on detonation convergence

Numerical simulations of detonation-containing flows have emerged as crucial tools for designing next- generation power and propulsion devices. As these tools mature, it is important for the combustion community to properly understand and isolate grid resolution effects when simulating detonations. To this end, the objective of this work is to provide a comprehensive analysis of the numerical convergence of unsteady detonation simulations, with focus on isolating the impacts of chemical timescale modifications on convergence characteristics in the context of operator splitting. With the aid of an AMReX-based adaptive mesh refinement flow solver-which enables resolutions up to ($\mathcal{O}$ (1000) cells-per-induction length-the convergence analysis is conducted using two kinetics configurations: (1) the simplified three-step Arrhenius-based model mechanism of Short and Quirk (1997), where chemical timescales in the detonation are modified by adjusting activation energies in the initiation and branching reactions, and (2) a detailed hydrogen- air mechanism, where the chemical timescales are adjusted by varying the ambient pressure. The convergence of unsteady self-sustained detonations in one-dimensional channels is then analyzed with reference to steady-state theoretical baseline solutions using these mechanisms. The goal of the analysis is to provide a detailed comparison of the effects of grid resolution on both macroscopic (peak pressures and wave speeds) and microscopic (wave structure) quantities of interest, drawing connections between the deviations from steady-state baselines and minimum chemical timescales. In particular, chemical timescale reductions were found to have minimal impact on the convergence of macroscopic properties. Furthermore, analyses of microscopic convergence trends, particularly in the reaction front location, revealed a key insight: maintaining the induction time while eliminating prohibitive chemical timescales through mechanism simplifications and combustion modeling can significantly enhance detonation convergence properties. Ultimately, this work uncovers resolution-dependent unsteady detonation convergence regimes and highlights the important role played by not only the chemical timescales, but also the ratio between the chemical timescale and induction time on the numerical convergence of the detonation wave structure.

Adaptive mesh refinement↗
DOE OSTI2020

Towards renewable flavors, fragrances, and beyond

Esters demand a large space of unique molecules with broad range of applications as flavors, fragrances, pharmaceuticals, cosmetics, green solvents, and advanced biofuels. Global demand of natural esters in food, household cleaner, personal care, and perfume industries is increasing while the ester supply from natural sources has been limited. Development of novel microbial cell factories for ester production from renewable feedstocks can potentially provide an alternative and sustainable source of natural esters and hence help fulfill growing demand. In this work, we highlight recent advances in microbial production of esters and provide perspectives for improving its economic feasibility. As the field matures, microbial ester production platforms will enable renewable and sustainable production of flavors, fragrances, and open new market opportunities beyond what nature can offer.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

The tier system: a host development framework for bioengineering

Development of microorganisms into mature bioproduction host strains has typically been a slow and circuitous process, wherein multiple groups apply disparate approaches with minimal coordination over decades. To help organize and streamline host development efforts, we introduce the Tier System for Host Development, a conceptual model and guide for developing microbial hosts that can ultimately lead to a systematic, standardized, less expensive, and more rapid workflow. The Tier System is made up of three Tiers, each consisting of a unique set of strain development Targets, including experimental tools, strain properties, experimental information, and process models. By introducing the Tier System, we hope to improve host development activities through standardization and systematization pertaining to nontraditional chassis organisms.

09 BIOMASS FUELS↗
DOE OSTI2026

The U.S. Fusion Materials Community Roadmap: Near-term research priorities for the development of plasma-facing and structural materials for fusion power plants

In response to the needs of a rapidly growing private fusion industry, the U.S. Fusion Materials Coordinating Committee (FMCC) and the broader U.S. fusion materials research community undertook an extensive effort to create a comprehensive roadmap for fusion materials development. The result of this effort was the U.S. Fusion Materials Community Roadmap (US-FMCR), which describes the steps needed to advance the technical maturity of leading candidates for plasma-facing materials and structural materials for fusion power plants from laboratory-scale experiments to a point of sufficient technological readiness for industrial adoption and implementation. However, researchers face significant resource constraints as well as very aggressive pilot plant development timelines. Thus, the research strategies detailed in the US-FMCR require further assessment to downselect the specific tasks that must be prioritized within the next two to three years, in order to make the most efficient use of funding, human resources, and experimental facilities. This paper presents an overview of the US-FMCR and its development process. We also present the subset of research objectives that the FMCC identified as the most urgent research priorities for the U.S. fusion materials research community. The state-of-the-art of materials research is also highlighted for each class of materials considered in the US-FMCR. The recommendations presented here integrate an extensive evaluation of the current status of fusion materials research with a broad cross-section of opinion from the wider U.S. fusion community.

Ferry, Sara [Massachusetts Institute of Technology↗
DOE OSTI2025

Effects of PFOS on the behavior, growth, emergence, and predation susceptibility of larval mosquitoes ( Culex quinquefasciatus )

Per-/polyfluoroalkyl substances (PFAS) have been commonly used over several decades for a variety of products and are very persistent in the environment. However, not much is known about their direct effects on aquatic invertebrates and their ecosystems. We examined the survival, behavior, development, and predation susceptibility of mosquito larvae Culex quinquefasciatus exposed to concentrations of perfluorooctanesulfonic acid (PFOS) ranging from 0.02 to 453.7 µg/L. PFOS exposure resulted in reduced larval survival, with a 48 hour LC50 (concentration with 50 % mortality) of 255.99 µg/L. PFOS exposure also resulted in reduced developmental success and slower maturation to adulthood (and thus slower emergence from the water) compared to control larvae. PFOS also resulted in delays in reaction to prodding stimuli, which were meant to simulate a predator attack, and longer reactions to prodding. Larvae exposed to PFOS also spent more time at the bottom of the water column, rather than at the surface where respiration takes place. Effects of larval mosquito PFOS exposure on predation by unexposed damselfly naiads (genus Ischnura) were not detected. Overall, this research suggests that PFOS impacts mosquito larvae survival, behavior, development, and adult emergence, which could have important implications for food webs or public health given the role of mosquitos as disease vectors.

Food web dynamics↗
DOE OSTI2020

Timing and extent of crop damage by wild pigs (Sus scrofa Linnaeus) to corn and peanut fields

The global expansion of wild pigs over the last few decades has resulted in an increase in extent and distribution of damages to crops, placing a growing strain on agricultural producers and land managers. Despite the extent of wild pig damage to agriculture, there is little data regarding timing and spatial variability of damage to corn (Zea mays Linnaeus) and we found no data regarding the effect of these factors on peanuts (Arachis hypogaea Linnaeus). Our objective was to determine the timing and extent of wild pig damage to corn and peanut fields, as well as the extent to which local habitat attributes are useful predictors of damage to these crops. During 2017–2018 we performed ground-based surveys throughout the growing season for 29 corn and 41 peanut fields in South Carolina, USA to determine the most important growth stages for wild pig depredation in both crops. Damage to corn peaked shortly after planting during the seedling stage, fell to nearly zero during V4–V6 stages, and resumed during the silk and mature stages. Peanut damage was almost exclusively limited to the seedling stage. Landscape models for both crops identified the extent of forested and wetland areas surrounding crop fields as the most important attributes positively associated with wild pig damage, while the amount of adjacent agricultural area and paved roads were associated negatively. The number of wild pigs identified by remote cameras also was an important indicator of the extent of damage to peanut fields. Results suggest management efforts to limit crop depredation by wild pigs should be targeted shortly prior to planting. Further, because damage was positively associated with the availability of wetland and forest habitats, our results suggest agricultural damage by wild pigs may be most severe near areas of preferred native habitats.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

THESEUS: A techno-economic design, integration and downselection framework for energy storage

Optimal selection of energy storage technologies is critical to ensure reliable integration of intermittent and often uncertain renewable energy in electricity grids. The consideration of a diverse set of energy storage technologies is required for a more sustainable deployment of energy storage. We present THESEUS (TecHno-Economic framework for Systematic Energy storage Utilization and downSelection), which is a comprehensive framework for the optimal selection, design and operation of energy storage systems. THESEUS includes rigorous models of major energy storage technologies at different maturity levels, such as thermal storage using phase-change materials or molten salt, cryogenic storage, mechanical storage in the form of compressed air and pumped hydro storage, chemical storage using hydrogen, and electrochemical storage in the form of lithium-ion, sodium sulfur and vanadium flow batteries. An illustrative case study on state-wide prospective energy storage shows that storage integration with fossil power plants could reduce the cost of meeting the grid energy demand by 20%, with mechanical storage as the best suited technology. Although high-temperature thermal storage has low storage efficiency, it is optimal for integration with renewable energy plants. In addition, Li-ion batteries are optimal for high ramping but low storage duration requirements. Furthermore, such insights can enable the deployment of both existing and emerging energy storage technologies to facilitate a smooth transition to a clean energy future.

25 ENERGY STORAGE↗
DOE OSTI2024

Evaluating the Impact of Off-Design CHP Performance on the Optimal Sizing and Dispatch on Hybrid Renewable-CHP Distributed Energy Resources

The maturation of distributed energy resources (DER) has prompted the exploration of their deployment in commercial building applications due to their potential to supply energy at lower costs and emissions rates compared to centralized generation. While several software tools exist for evaluating the techno-economic potential of integrated renewable energy and combined heat and power (CHP) systems for distributed generation applications, many suffer from poor accuracy in capturing off-design (part load and changes in ambient air temperature and pressure) performance characteristics of microturbines, combustion turbines, or internal combustion engines. Thus, this paper presents a methodology for integrating these off-design characteristics in the mixed-integer linear program within REopt, a hybrid DER screening tool. The economic impact of the CHP off-design performance is observed through several application studies of various hybrid system configurations in different climates. Each study indicates how CHP off-design performance influences optimal sizing and dispatch decisions and therefore overall system economic value. We observe through case studies that modeling without the off-design effects, depending on the CHP prime mover and site, can result in Net Present Value predictions of hybrid systems that can be overoptimistic in frequently hot climates (up to 52%), too conservative in frequently cold climates (up to 11%), or unaffected (+/-1%) in temperate climates. Cases also highlight several advantages of hybrid systems relative to non-hybrid systems such as total economic value and the systems' ability to mitigate potentially negative consequences attributed to off-design performance.

ambient de-rate↗
DOE OSTI2021

Microfracture-pore structure characterization and water-rock interaction in three lithofacies of the Lower Eagle Ford Formation

The microfracture-pore structures and water-rock interactions of eight samples of three typical lithofacies (three limestone, three wackestone, and two mudstone) from the Lower Eagle Ford Formation have been investigated using an integrated methodology. The methods used were X-ray diffraction (XRD), total organic carbon (TOC) content, pyrolysis, thin-section petrography, scanning electron microscopy (SEM), mercury intrusion porosimetry (MIP), spontaneous water imbibition, and water vapor & nitrogen physisorption. Petrophysical properties such as organic richness, maturity, mineral composition, types and patterns of microfractures and pores, porosity, pore-throat size distribution, pore size distribution, pore connectivity, water adsorption and desorption behavior were determined from these methods, and the results compared among the three lithofacies. For example, the three limestone EAS samples and three wackestone DM samples show a low porosity range from 2.02–3.35%, whereas the two mudstone VRU samples exhibit a much large average porosity of 11.7% by MIP results. Nitrogen physisorption results show that pore size distributions have a good similarity in N2 adsorption volume for the samples with similar lithology. Microfractures are morphologically divided into seven types, with their definitions & pictorial examples presented and possible formation mechanisms proposed. In addition, the water vapor physisorption behavior and their controlling factors are discussed. Here, the water adsorption capacity shows a positive relationship (R 2 = 0.90) with clay content and a negative relationship (R 2 = 0.99) with carbonate content. In general, this integrated study of microfracture-pore structure characterization and water-rock interaction provides some insights of water vapor adsorption behavior in different lithofacies and whether microfractures could be an important pathway for fluid flow.

58 GEOSCIENCES↗
DOE OSTI2020

Biofuels Policies That Have Encouraged Their Production and Use: An International Perspective

This study evaluated the effectiveness of technology-push and market-pull policies in encouraging the production and use of biofuels in 15 countries including major biofuels producers. Biofuels production and consumption data for the 12-year period of 2006-2017 showed that in most of the surveyed countries, biofuels policies played an important role in developing and growing regional and national biofuels markets. Blending mandates continue to be the main market-pull policy used to create and expand biofuels markets. Countries with a mixture of market-pull and technology-push policy instruments have been most successful at increasing biofuels production and use and also developing and deploying less mature advanced biofuels. Most policies have primarily promoted the production and use of biofuels for road transport with key long-distance transport sectors (aviation and shipping) drawing less policy attention despite being significant fuel consumers and carbon emitters. While many older policies were originally developed to promote energy security, more recent policies, such as low carbon fuel standard, have reduction in the carbon intensity of transportation fuels as a primary goal. While policies have been essential in promoting the on-going growth of biofuels, they have not been sufficient to drive the level of development needed to decarbonize the transport sector.

biofuels for transport↗
DOE OSTI2022

Policy choices and outcomes for offshore wind auctions globally

Offshore wind energy is rapidly expanding, facilitated largely through auctions run by governments. We provide a detailed quantified overview of utilised auction schemes, including geographical spread, volumes, results, and design specifications. Our comprehensive global dataset reveals heterogeneous designs. Although most auction designs provide some form of revenue stabilisation, their specific instrument choices vary and include feed-in tariffs, one-sided and two-sided contracts for difference, mandated power purchase agreements, and mandated renewable energy certificates. We review the schemes used in all eight major offshore wind jurisdictions across Europe, Asia, and North America and evaluate bids in their jurisdictional context. We analyse cost competitiveness, likelihood of timely construction, occurrence of strategic bidding, and identify jurisdictional aspects that might have influenced auction results. We find that auctions are embedded within their respective regulatory and market design context, and are remarkably diverse, though with regional similarities. Auctions in each jurisdiction have evolved and tend to become more exposed to market price risks over time. Less mature markets are more prone to make use of lower-risk designs. Still, some form of revenue stabilisation is employed for all auctioned offshore wind energy farms analysed here, regardless of the specific policy choices. Our data confirm a coincidence of declining costs and growing diffusion of auction regimes.

17 WIND ENERGY↗
DOE OSTI2024

Who will be making wave energy? A community-driven design approach toward just and sustainable energy futures in Alaska

Renewable energy transition, once thought of as a singular, large-scale switch in industrial energy generating technologies from fossil fuels to renewables, have gained a broader set of requirements, including the need for justice and environmental protection. While discourse around policy and process has grown to consider these requirements, the focus of design of new renewable energy projects and technologies remains dominantly fixed on maximizing energy production, and renewables are falling short of meeting the requirements of just energy transitions. Meanwhile, in design studies, participatory and co-design approaches which explicitly consider justice in both process and outcomes have long been theorized and applied. However, applications of these approaches to renewable energy project design are under-theorized. In this paper, we explore the effectiveness of the adoption and adaptation of a co-design approach called Community-Driven Design (CDD) in enabling meaningful participation prior to technological maturity and bringing the attention of designers to a more diverse set of energy futures focused on justice and sustainability. Here, we do so by developing and testing the approach with community members in Sitka, AK, USA. We conclude that the approach has the potential to increase meaningful participation. Furthermore, we conclude that through diverse understandings of energy and the emergence of design narratives that engage with the complexity of vulnerability, accountability, and resilience, CDD led designers to consider justice, sustainability, and a diverse set of possible energy futures both within and beyond Sitka.

16 TIDAL AND WAVE POWER↗
DOE OSTI2022

Drivers and ecological impacts of a wildfire outbreak in the southern Appalachian Mountains after decades of fire exclusion

During one of the warmest and driest droughts of the last century, the southern Appalachian Mountains experienced a regional outbreak of over a dozen large wildfires in late fall of 2016. We provide a synthesis of long-term forest changes leading up to the 2016 wildfires, examine the climatic setting and patterns of burn severity in relationship to topography, and discuss the ecological and management implications of these and future fires. During the pre- and post-European settlement periods, frequent low- and mixed-severity wildfires interacted with complex topographic gradients and maintained heterogenous landscapes dominated by several species of oak (Quercus spp.), pine (Pinus spp.), and the American chestnut (Castanea dentata). Land-use changes associated with European settlement, loss of the American chestnut, and 20th century fire exclusion resulted in large scale shifts towards mesic, fire-intolerant species (i.e. mesophication). Wildfire activity began increasing in the early 1980s, but most fires in the region are small (<1,000 ha). In Fall of 2016, deciduous tree leaf fall occurred concurrently with a period of anomalously dry and warm weather, creating ideal conditions for fire ignition and spread. Thousands of ignitions across the region strained suppression resources and eight fires grew to greater than 5,000 ha. The 2016 fires were larger and burned more area than in the previous three decades combined. In one unique landscape setting, the Chimney Tops 2 Fire, a synoptic wind event drove extreme fire behavior and burned large, high-severity patches resulting in devastating effects in the wildland urban interface. However, immediate post-fire burn severity mosaics for other fires were composed primarily of low- (73 %) and moderate-severity (21 %) fire effects. High-severity fire comprised only 6 % of the area burned, and occurred mostly on steep upper slopes and ridges on south-facing aspects, reflecting the importance of bottom-up topographic drivers in this region. Although the fires will likely enhance biodiversity by restoring fire-dependent species and creating early seral habitat, invasions of non-native plant species, delayed mortality of mature pines and oaks, and rapid re-sprouting of pyrophyllic shrubs pose significant management challenges. Although similar large fire outbreaks may become more common under future climatic conditions, they are unlikely to reverse the effects of mesophication and significantly alter forest dynamics at broad spatial scales. Furthermore, the 2016 fires exposed the vulnerability of the region to wildfire during acute fall drought and demonstrate the potential ecological effects of future wildfires in mixed pine-hardwood landscapes of the southern Appalachians.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Context matters: Natural tree mortality can lead to neighbor growth release or suppression

Where competition suppresses tree growth, mortality of adjacent trees can release the surviving individuals, leading to a growth increase. However, primary forests are complicated systems, where trees interact in both competitive and facilitative ways mediated by their size, species, and the broad ecological context in which they grow. Thus, the magnitude and even direction of growth responses to the mortality of nearby trees may vary, which has implications for our understanding of community- and ecosystem-level dynamics following mortality events. Unfortunately, although many studies focus on the impacts of light availability and general crowding on tree growth, we know relatively little about the effects of naturally occurring mortality events on the growth of neighboring trees. To address this issue, we used 40 years of data from 15 permanent forest-monitoring plots in Mt Rainier old-growth forests, comparing observed to expected radial growth of individual trees following the death of their nearest neighbor. Although we found evidence of a general growth-release response, this was not universal among all trees, with small trees in particular exhibiting growth suppression (rather than release) following neighboring tree mortality. In addition to small size, growth-suppression was more likely if the dead neighbor was the same species, consistent with facilitative effects as mediated through belowground networks. At the stand level, the average growth release after nearest neighbor mortality was greatest in low-density stands with large trees, with elevation and community composition also playing a role. Decades more monitoring could reveal how long growth release (or suppression) is sustained by individual trees following neighboring mortality events, as well as potential response lags and the role of species identity in determining whether interactions with neighbors are competitive or facilitative. Nonetheless, our results suggest that although mature trees have competitive effects on their larger neighbors, they also have an important role in supporting the ingrowth of small trees. More broadly, we demonstrate that the nature of interactions between individual neighboring trees is highly context dependent.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Are we modeling the properties of unconventional shales correctly?

Technological advancements have led to impressive growth in hydrocarbon (HC) production from unconventional shale reservoirs. However, major limiting factors in shale gas development are i) low recovery of gas in place (<20%), (ii) a rapid decline in well productivity, iii) release of contaminants, despite the use of advanced hydraulic fracturing fluids and multiple fracturing stages. This is mainly due to a lack of understanding of the nanoscale physicochemical properties of shales, especially that of kerogen, the macromolecule that is not only the source of the majority of the HC’s in shales but also holds most of the HC’s in adsorbed state. Over the last few years, a large number of studies have been published on simulating the physicochemical properties of shale utilizing molecular models of kerogen. However, the molecular models of kerogen input into these simulations are based on the kerogen “type” derived from a very limited number of shale samples. In this paper, we examine the variations that can exist in kerogen structure within a particular kerogen “type” across different shale basins and single shale basin at similar thermal maturity levels. We propose that using kerogen “type” based structural models for molecular simulations could lead to inaccurate estimation of HC reserves, HC recovery, HC production, frackability, and quantity and quality of produced water. Our study highlights the need for developing a better classification of kerogen based on its “molecular structure” instead of “type” for a more accurate prediction of physicochemical properties of shales.

04 OIL SHALES AND TAR SANDS↗
DOE OSTI2026

Scalable Generation of High-fidelity Synthetic Population Ensembles

Used within social simulations, synthetic population ensembles enable uncertainty quantification (UQ) methods for obtaining more robust model inference and prediction. A synthetic population ensemble is a series of plausible virtual reconstructions of an area’s population at the granularity of people and residences, generated stochastically to preserve privacy of the source population survey’s respondents. In this paper, we demonstrate the production of large synthetic population ensembles for the U.S. via Oak Ridge National Laboratory’s UrbanPop framework to support modeling of high spatial resolution energy affordability metrics from nationwide social surveys in collaboration with the fusionACS project. The study involves two scenarios: creating ensembles for (1) 17 U.S. metropolitan areas in 2019 and (2) full U.S. Census Divisions in 2023, with each scenario consisting of 41 population instances (a base realization and 40 replicates). To accomplish this task at scale, we configured an integrated system within a research cloud, comprised of virtual containerizations, GPU-enhanced functionality, and orchestrated deployments of UrbanPop’s maturing Likeness Python ecosystem. Results demonstrate we maintained high-fidelity approximations of residential totals by areas of interest and the demographic characteristics of neighborhoods while reducing manual workflow burdens. Finally, we discuss plans to fine-tune and further develop our automated workflows for truly distributed job orchestration to increase computational efficiency, as well as provide an outlook for broadening applications of the ensembles.

Cluster computing↗