Observation of Damage During Dynamic Compression of Production and Low-Defect HMX Crystals in Sylgard® Binder Using X-Ray Phase Contrast Imaging
Abstract not provided
Paulson, Shane C.↗
SEARCH · Engineering Papers
Results for “low observability”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Geochemical-hydromechanical couplings during water-serpentinized harzburgite interactions at 20° C and 30 bars
Interaction of groundwater with the serpentinized harzburgites of the upper mantle plays an important role in the geologic carbon cycle and serpentinization processes. Here, in this study, an intact serpentinized harzburgite with more than 60% lizardite from the Semail ophiolite in Oman was reacted with water at near neutral pH and low PCO 2 to observe its dissolution behavior and reaction path within the CaO-MgO-SiO 2 -CO 2 -H 2 O system at 20 °C and 30 bars. In the experiment, mass (i.e. H 2 O, ions) transfer is by diffusion and the selected temperature and pressure conditions mimic water-rock interactions at the shallow portions of most ultramafic rock hosted aquifers. Equilibrium activity-activity diagrams and thermodynamic data were used to compare the experimentally determined reaction path with the theoretical stability boundaries for minerals involved to investigate the evolution of bulk chemical composition, mineralogy, and water composition. The experiments demonstrated that (i) the water-rock interactions increased the pH of the aqueous phase from 5.9 to 7.5 over a period of 18 weeks; (ii) the dissolution of lizardite, orthopyroxene (enstatite), and clinopyroxene (diopside and augite) increased the concentration of Mg, Ca, and Si in the aqueous phase; (iii) the dissolution was incongruent with respect to Mg and Si, favoring Si release at pH > 6 due to (a) breaking of more reactive cation‑oxygen bonds that is consistent with the stoichiometry of magnesium for proton exchange reaction which favors a surface that is enriched in Mg at basic conditions, and (b) preferential dissolution of clinopyroxene Mg 1.30 Ca 0.52 Fe 0.06 Si 2 O 6 ; (iv) the aqueous phase was undersaturated with respect to carbonate (e.g. calcite, magnesite, and hydromagnesite) and hydrous (e.g. lizardite, chrysotile, brucite, and talc) minerals; (v) the bulk chemical composition and mineralogy of the intact serpentinized harzburgite matrix did not change; (vi) the thermodynamic data can successfully predict water-intact serpentinized harzburgite behavior if the water chemical composition can be constrained; and (vii) no detectable macroscopic form of damage (e.g. microcracks forming as a result of differential stress fields due to changes in volume during chemical reaction) was observed.
Carbonation↗
Alkaloids are associated with increased microbial diversity and metabolic function in poison frogs
Shifts in host-associated microbiomes can impact both host and microbes. It is of interest to understand how perturbations, like the introduction of exogenous chemicals, impact microbiomes. In poison frogs (family Dendrobatidae), the skin microbiome is exposed to alkaloids that the frogs sequester for defense. These alkaloids are antimicrobial; however, their effect on the frogs’ skin microbiome is unknown. To test this, we characterized microbial communities from field-collected dendrobatid frogs. Then, we conducted a laboratory experiment to monitor the effect of the alkaloid decahydroquinoline (DHQ) on the microbiome of two frog species with contrasting alkaloid loads in nature. In both datasets, we found that alkaloid-exposed microbiomes were more phylogenetically diverse, with an increase in diversity among rare taxa. Further, to better understand the isolate-specific response to alkaloids, we cultured microbial isolates from poison frog skin and found that many isolates exhibited enhanced growth or were not impacted by the addition of DHQ. To further explore the microbial response to alkaloids, we sequenced the metagenomes from high- and low-alkaloid frogs and observed a greater diversity of genes associated with nitrogen and carbon metabolism in high-alkaloid frogs. From these data, we hypothesized that some strains may metabolize the alkaloids. We used stable isotope tracing coupled to nanoSIMS (nanoscale secondary ion mass spectrometry), which supported the idea that some of these isolates are able to metabolize DHQ. Together, these data suggest that poison frog alkaloids open new niches for skin-associated microbes with specific adaptations, such as alkaloid metabolism, that enable survival in this environment.
59 BASIC BIOLOGICAL SCIENCES↗
Nickel hydroxide–nickel carbonate competitive growth on carbonate surfaces
The thermodynamic and kinetic factors controlling the competitive heterogeneous nucleation and growth of ubiquitous metal carbonate and hydroxide phases are poorly understood. In this work, calcite (CaCO 3 ) and magnesite (MgCO 3 ) powders were reacted with NiCl 2 (0–600 μM) for 7 days at 22 °C and 5 °C. The reacted powders were analyzed with X-ray photoelectron spectroscopy (XPS), scanning electron microscopy, and energy-dispersive X-ray spectroscopy to characterize the Ni surface precipitates formed. Evidence from these techniques pointed to the formation of mixed Ni carbonate-Ni hydroxide amorphous surface precipitates. On calcite, XPS detected primarily Ni(OH) 2 despite the initial solutions being more supersaturated with respect to gaspéite (NiCO 3 ) than to theophrastite (Ni(OH) 2 ) by a factor of 17–18. In contrast, NiCO 3 was the dominant component detected by XPS on magnesite in the same conditions. Decreasing the temperature had the effect of increasing the proportion of NiCO 3 to the detriment of Ni(OH) 2 . The experimental observations were consistent with low lattice/cation size mismatch favoring NiCO 3 nucleation and temperature most influencing Ni(OH) 2 nucleation. Comparison to previous work on Co-reacted powders indicated the differences in lattice/cation size mismatch and/or water exchange rate impacted the composition of the surface precipitates more than the relative thermodynamic stabilities of the competing minerals. This work explored the heterogeneous growth regime of Ni carbonate and hydroxide phases on carbonate surfaces and shed light on the factors that control the competition between surface precipitates when mineral surfaces are in contact with aqueous solutions supersaturated with respect to multiple mineral phases. In conclusion, these results contribute to geochemists’ efforts toward interpreting data from geochemical systems with elevated Ni concentrations, improving Ni environmental remediation and recovery strategies, and predicting the fate and transport of Ni in geochemical systems.
Heterogeneous nucleation↗
Pro5 is not essential for the formation of ‘Ni-hook’ in nickel superoxide dismutase
The N-terminus of nickel-dependent superoxide dismutase (NiSOD) forms a structural motif known as the "Ni-hook," where the peptide wraps around the metal to bring cysteine-2 and cysteine-6 into spatial proximity, allowing these residues to coordinate in a cis-geometry. A highly conserved proline-5 residue in the Ni-hook adopts a cis-conformation that is widely considered important for its formation. Herein, we investigate this role by point mutation of Pro5 to alanine. The results obtained show that the variant exhibits wild-type-like redox catalysis and features a Ni(III) center very similar to that found in enzyme. Structural analysis using x-ray absorption spectroscopy of the nickel sites in as-isolated P5A-NiSOD reveals changes in the variant and are consistent with a six-coordinate Ni site with (N/O) 4 S 2 coordination. These changes are attributed to changes in the Ni(II) site structure. Nickel-binding studies using isothermal titration calorimetry reveal two binding events with K d = 25(20) nM, and 250(60) nM. These events are attributed to i) Ni(II) binding to a preformed Ni-hook containing cis-Pro5 and ii) the combination of trans- to cis- isomerization upon Ni(II) binding, respectively. Finally, the higher-affinity binding event is absent in P5A-NiSOD, an observation attributed to the low abundance of the cis-Ala5 isomer in the apo-protein.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Analysis of position-dependent cavity parameters in irradiated metals to obtain insight on fundamental defect migration phenomena
Motion of point defects is a fundamental process that governs microstructure and properties of materials. Here, we examine the near-surface and grain boundary cavity swelling depth profiles in neutron- and ion-irradiated simple metals (Cu, Ni, and Fe-Cr) and investigate diffusional broadening of implanted Ni ions in Fe-Cr alloys. Vacancy migration energies and radiation-enhanced diffusion were experimentally estimated. Cavity denuded zone widths near planar sinks are shown to be dependent on temperature, damage rate, balance of point defects and sinks, and vacancy migration energies. An enhanced cavity swelling zone adjacent to the void-denuded zone was observed in specimens with low to moderate sink strength and interpreted as evidence of 1D gliding interstitial clusters. Radiation-enhanced diffusional broadening of implanted Ni ions (at 400–550 °C) in Fe and Fe-Cr was up to 250 nm toward the surface, which leads to a much broader near-peak-damage region where cavity swelling is suppressed. Diffusional broadening of implanted ions is calculated to be similarly pronounced for self-ion irradiations, particularly near the peak and higher swelling temperature regimes. Adequately high ion energies (~8–15 MeV) are recommended for ion-irradiation studies to provide a sufficiently broad midrange safe analysis region with minimized surface and injected ion effects.
36 MATERIALS SCIENCE↗
Elevated levels of radiocarbon in methane dissolved in seawater reveal likely local contamination from nuclear powered vessels
Measurements of the natural radiocarbon content of methane ( 14 C-CH 4 ) dissolved in seawater and freshwater have been used to investigate sources and dynamics of methane. However, during investigations along the Atlantic, Pacific, and Arctic Ocean Margins of the United States, as well as in the North American Great Lakes, some samples revealed highly elevated 14 C-CH 4 values, as much as 4–5 times above contemporary atmospheric 14 C-CH 4 levels. Natural production of the 14 CH 4 isotopologue is too low to cause these observations nor can it explain the variations in location and depth. Numerous lab and field validation tests and blanks, as well as the relatively small number of samples that display these elevated values, all suggest that these signals are not derived from an unknown procedural issue. Here, in this work, we suggest that the byproducts of nuclear power generation include localized discharges of the 14 CH4 isotopologue into marine and aquatic environments, severely altering the measured 14 C-CH 4 isotopic signals. Since several of our sample sites are distant from on-land nuclear powerplants, we conduct further calculations concluding that the most elevated anomalies in 14 C-CH 4 likely originate with discharge from nuclear-powered vessels.
54 ENVIRONMENTAL SCIENCES↗
Hydrated doped-BaZrO 3 proton conductors studied by positron annihilation lifetime spectroscopy
The study of defect chemistry for doped BaZrO 3 proton conductors is of particular interest because of defect interactions that can affect the proton conductivity of the material. Protons incorporated due to the material's hydration can be trapped by negatively charged immobile dopants, reducing proton mobility. The reduction of the proton conduction impedes using BaZrO 3 materials in energy conversion applications at intermediate temperatures (300°C – 600°C). The probing of proton trapping in doped BaZrO 3 is hindered by the limited availability of techniques sensitive to defect chemistries. In this work, we used positron annihilation lifetime spectroscopy (PALS) to study the defect chemistry of Y-doped and Sc-doped BaZrO 3 . Using a two-state positron trapping model we showed that PALS can be used to study the defect chemistry of hydrated dense proton conductors. Positron trapping rates and lifetimes were correlated with doping levels of the materials. Probability significance t-tests were carried out for PALS parameters to verify whether there are differences/similarities for various populations: non-doped/doped, level and type of doping, high temperature, and surface effects. Further, the results revealed that the initial doping generates a significant number of traps available for positrons. Doping in yttrium increased the positron trapping rate, while this effect was not observed with scandium. Low-temperature hydration affects specimens significantly inhibiting positron trapping at undoped BaZrO 3 material and highly doped specimens. Positronium formation in rough surface layers, and highly doped specimens was detected but does not exceed 1%.
36 MATERIALS SCIENCE↗
Reaction-Induced Fracturing of Porous Carbonate Rocks during Volume-Increasing Replacement by Witherite
Volume-increasing replacement reactions can lead either to fracturing of the parent phase or to the formation of cohesive layers that passivate further reaction, but the factors that drive one outcome or the other are not understood. In this experimental study, we investigated the volume-increasing replacement of carbonate rocks (consisting of CaCO 3 and CaMg(CO 3 ) 2 ) of different porosity by witherite (BaCO 3 ). Samples were characterized using scanning electron microscopy, Raman spectroscopy, small-angle neutron/X-ray scattering, X-ray tomography, and scanning transmission electron microscopy. We observed the formation of a witherite reaction layer and witherite formation within pores and along grain boundaries. Despite this being a volume-increasing replacement reaction, newly formed witherite was porous, potentially allowing further replacement. Filled fractures were observed in the low-porosity carbonates, whereas witherite formed within pores in high-porosity carbonates. We conclude that fracturing of the parent phase versus passivation is contingent on the initial microstructure of the parent with an optimal degree of porosity required for fracturing.
Calcite↗
Growth-Controlled Broad Emission in Phase-Pure Two-Dimensional Hybrid Perovskite Films
Two-dimensional hybrid metal halide perovskites (2D perovskites) are attractive for light-emitting devices and other applications because their emission is tunable across the visible spectrum. The emission profile of 2D perovskites can be broadened via a variety of mechanisms and is further complicated by the presence of impurities. Here, the challenge of making phase-pure films in Ruddlesden–Popper phases [(A') 2 (A) n–1 B n X 3n+1 structure] is overcome by using a single A/A'-site cation, ethylammonium (EA), whose optimal size also prohibits the formation of off-target phases. In the (EA) 2 (EA) n–1 Pb n Br 3n+1 family, the low-energy, broad emission observed in bulk crystals is reduced in spin-cast, polycrystalline films. This decrease in broad emission, attributed to phonon-mediated processes, is correlated with the strain in polycrystalline films that is observed by X-ray scattering. Photothermal deflection spectroscopy shows that strain also increases the electronic disorder near the free exciton absorbance. Broad emission in films can be recovered by slowing growth kinetics, which removes the strain acquired from spin-casting and increases the domain size. Furthermore, these results help extend the utility of 2D perovskites by suggesting design rules for the growth of thin films with the targeted phase and emission.
36 MATERIALS SCIENCE↗
Anomalous Ferromagnetic Behavior in Orthorhombic Li 3 Co 2 SbO 6
Monoclinic Li 3 Co 2 SbO 6 has been proposed as a Kitaev spin liquid candidate and investigated intensively, whereas the properties of its polymorph, the orthorhombic phase, are less known. In this work, we report the magnetic properties of orthorhombic Li 3 Co 2 SbO 6 as revealed by dc and ac magnetic susceptibility, muon spin relaxation (μSR), and neutron diffraction measurements. Successive magnetic transitions at 115, 89, and 71 K were observed in the low-field dc susceptibility measurements. The transitions below T N (115 K) are suppressed at higher applied fields. However, zero-field ac susceptibility measurements reveal distinct frequency-independent transitions at about 114, 107, 97, 79, and 71 K. A long-range magnetic ordered state was confirmed by specific heat, μSR, and neutron diffraction measurements, all indicating a single transition at about 115 K. The discrepancy between different measurements is attributed to possible stacking faults and/or local disorders of the ferromagnetic zigzag chains, resulting in ferromagnetic boundaries within the overall antiferromagnetic matrix.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Defect Energetics in Pseudo-Cubic Mixed Halide Lead Perovskites from First-Principles
Owing to the increasing popularity of lead-based hybrid perovskites for photovoltaic (PV) applications, it is crucial to understand their defect energetics and its influence on their optoelectronic properties. In this work, we simulate various point defects in pseudocubic structures of mixed iodide-bromide and bromide-chloride methylammonium lead perovskites with the general formula MAPbI 3-y Br y or MAPbBr 3-y Cl y (where y is between 0 and 3), and use first-principles based density functional theory computations to study their relative formation energies and charge transition levels. We identify vacancy defects and Pb on MA antisite defect as the lowest energy native defects in each perovskite. Here, we observe that while the low energy defects in all MAPbI 3-y Br y systems only create shallow transition levels, the Br or Cl vacancy defects in the Cl-containing pervoskites have low energy and form deep levels which become deeper for higher Cl content. We examine the structures and density of states of pure and defect-containing perovskite systems to obtain an understanding of the nature of defect levels. Further, we study extrinsic substitution by different elements at the Pb site in MAPbBr 3 , MAPbCl 3 , and the 50-50 mixed halide perovskite, MAPbBr 1.5 Cl 1.5 , and identify some transition metals that create lower energy defects than the dominant intrinsic defects and also create midgap charge transition levels.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Electrochemically Mediated Au–C(sp 2 ) Anchors for Molecular Electronics
Terminal anchor groups play a key role in the stability and electronic properties of molecular junctions. Single molecule junctions typically consist of two preinstalled terminal anchors linking organic molecules to metal electrodes. Here, in this work, we show that p -terphenyl derivatives containing only a single terminal anchor show conductance features similar to junctions with two preinstalled terminal anchors. A set of p -terphenyl derivatives with one terminal anchor was prepared using automated chemical synthesis and characterized using single molecule electronics experiments, molecular dynamics (MD) simulations, bulk electrochemistry and spectroscopy, and nonequilibrium Green’s function-density functional theory (NEGF-DFT) calculations. Our results show that 4-amino- p -terphenyl (PPP) and related analogs exhibit a well-defined high conductance state that is diminished or absent in other p-terphenyl derivatives lacking a preinstalled amine terminal anchor or fluorine or methyl substitutions at the terminal para position. However, a low conductance state is observed in all amino- p -terphenyl derivatives with one preinstalled anchor due to molecular junctions formed by noncovalent dimeric π–π stacking interactions. The observed high conductance state diminishes upon the addition of reducing agents and is restored upon the addition of an oxidizing agent. Our results suggest that the high conductance state arises due to Au–C(sp 2 ) bond formation facilitated by a single electron oxidation event at the electrode surface. A series of control experiments with different anchor groups shows that primary amines play a key role in forming Au–C bonds for molecular junctions. Overall, these results suggest that Au–C bond formation gives rise to high conductance pathways in organic molecules containing only one preinstalled terminal anchor. Insights from this work can be leveraged in the design of molecular electronic devices, particularly in understanding the mechanisms of molecular binding and junction formation.
charge transport↗
Organic-Inorganic Reaction of Li-Containing thin film: Structure of Lithium Propane Dioxide via MLD
In combining organometallic with organic precursors, molecular layer deposition (MLD) offers not only an expanded portfolio of molecular combinations but specifically the possibility of tuning mechanical properties for more robust functionality. This is appealing for applications in energy storage, where ion transport in and out of electrodes causes significant stress/strain cycling. It is particularly opportune for Li-ion solid state batteries (LISSBs), where electrode and solid electrolyte structures are usually arranged densely for high power and energy. Despite diverse MLD applications to date, little prior research has been aimed at Li-containing MLD materials and processes. Here, we report the MLD growth and process for a lithium-containing organic thin film using lithium tert-butoxide (LiO t Bu) and 1,3-propanediol, leading to an MLD film of lithium propane dioxide, Li 2 O 2 C 3 H 6 (LPDO), identified through X-ray photoelectron spectroscopy (XPS) and ab initio calculations. The growth showed self-limiting behavior for both precursors, with significant nucleation delay before linear growth at 0.23 Å/cycle at 150 °C, and 0.15 Å/cycle at 200 °C. XPS-determined stoichiometry was Li 1.6 O 2.2 C 3 H 6 at both 150 and 200 °C, while additional species, presumably from incomplete reaction, were found at 100 °C, leading to a notably higher (0.84 Å/cycle) growth rate. The LPDO film showed crystallinity and high surface roughness when grown on the crystalline substrate, while on the amorphous substrate, an amorphous LPDO film with low surface roughness was observed. In addition, high air sensitivity of LPDO film was observed, with Li propyl carbonate and Li carbonate formation under air exposure. Further modification strategies were proposed in order to achieve a MLD or atomic layer deposition-/MLD-based solid electrolyte material.
25 ENERGY STORAGE↗
Observation of the Fluctuation Spin Hall Effect in a Low-Resistivity Antiferromagnet
The spin Hall effect (SHE) can generate a pure spin current by an electric current, which is promisingly used to electrically control magnetization. To reduce the power consumption of this control, a giant spin Hall angle (SHA) in the SHE is desired in low-resistivity systems for practical applications. Here, critical spin fluctuation near the antiferromagnetic (AFM) phase transition in chromium (Cr) is proven to be an effective mechanism for creating an additional part of the SHE, named the fluctuation spin Hall effect. Further, the SHA is significantly enhanced when the temperature approaches the Néel temperature (T N ) of Cr and has a peak value of -0.36 near T N . This value is higher than the room-temperature value by 153% and leads to a low normalized power consumption among known spin–orbit torque materials. This study demonstrates the critical spin fluctuation as a prospective way to increase the SHA and enriches the AFM material candidates for spin–orbitronic devices.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Ultrafine Interwoven Dendritic Cu 2 Se/CuFeSe 2 Composites with Enhanced Thermoelectric Performance
As an effort to develop high-performance and stable copper chalcogenide thermoelectrics, several (1-x)Cu 2 Se/(x)CuFeSe 2 composites were successfully synthesized via a one-step solid-state transformation of CuSe 2 template. Uniform ultrafine dendritic structures consisting of interweaving Cu 2 Se and CuFeSe 2 nanofibers were observed in samples with low Fe content (0.05 ≤ x ≤ 0.1). Increasing the Fe content to x = 0.5 led to phase segregation into Cu 2 Se-rich region with embedded CuFeSe 2 fine structures interwoven with CuFeSe 2 -rich region containing Cu 2 Se nanofibers. The formation of such an entwined dendritic structure is believed to arise from the temperature-dependent solubility of CuFeSe 2 in the Cu 2 Se matrix. The dynamic dissolution of CuFeSe 2 into the Cu 2 Se at high temperatures leads to temperature-dependent doping of the Cu 2 Se matrix, enabling drastic enhancements of thermoelectric power factor at high temperatures. As a result, such a strategy is expected to be a powerful tool for properties modulation in thermoelectric materials.
36 MATERIALS SCIENCE↗
Self-Assembled Magnetic Nanoparticle Layers: Structural Control for Reconfigurable Magnetism and Functional Applications
We advance soft X-ray vector ptychographic tomography to map the 3D magnetization field in self-assembled superparamagnetic nanoparticles at a liquid–liquid interface, revealing how layered structures influence magnetic ordering. We observe that monolayers with low coordination numbers exhibit weak magnetic order, with magnetic vortices disrupting spin alignment. In contrast, bilayers and trilayers with higher coordination numbers display long-range magnetic order with strong spin correlations across larger distances and a suppression of magnetic vortices. We further quantify the average distance for vortex–antivortex pairs as 26.0 ± 2.0 nm, while vortex–vortex and antivortex–antivortex pairs exhibit larger separations, averaging 44.9 ± 5.2 and 54.1 ± 7.4 nm, respectively. These experimental results are supported by micromagnetic Monte Carlo simulations. Our findings illustrate how layered structures enhance magnetic order and spin correlation in superparamagnetic nanoparticle assemblies, providing a promising approach for tuning magnetic properties in applications such as data storage, microrobotics, and biomedicine.
Lu, Xingyuan↗
Investigation of the Unusual Ability of the [FeFe] Hydrogenase from Clostridium beijerinckii to Access an O 2 -Protected State
[FeFe] hydrogenases are enzymes capable of producing and oxidizing H 2 at staggering submillisecond time scales. A major limitation in applying these enzymes for industrial hydrogen production is their irreversible inactivation by oxygen. Recently, an [FeFe] hydrogenase from Clostridium beijerinckii (CbHydA1) was reported to regain its catalytic activity after exposure to oxygen. In this report, we have determined that artificially matured CbHydA1 is indeed oxygen tolerant in the absence of reducing agents and sulfides by means of reaching an O 2 -protected state (Hinact). We were also able to generate the H inact state anaerobically via both chemical and electrochemical oxidation. We use a combination of spectroscopy, electrochemistry, and density functional theory (DFT) to uncover intrinsic properties of the active center of CbHydA1, leading to its unprecedented oxygen tolerance. We have observed that reversible, low-potential oxidation of the active center leads to the protection against O 2 -induced degradation. The transition between the active oxidized state (H ox ) and the H inact state appears to proceed without any detectable intermediates. We found that the Hinact state is stable for more than 40 h in air, highlighting the remarkable resilience of CbHydA1 to oxygen. Using a combination of DFT and FTIR, we also provide a hypothesis for the chemical identity of the H inact state. These results demonstrate that CbHydA1 has remarkable stability in the presence of oxygen, which will drive future efforts to engineer more robust catalysts for biofuel production.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗