Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “lithology”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Impact of the numerical solution approach of a plant hydrodynamic model (v0.1) on vegetation dynamics

Abstract. Numerous plant hydrodynamic models have started to be implemented in vegetation dynamics models, reflecting the central role of plant hydraulic traits in driving water, energy, and carbon cycles, as well as plant adaptation to climate change. Different numerical approximations of the governing equations of the hydrodynamic models have been documented, but the numerical accuracy of these models and its subsequent effects on the simulated vegetation function and dynamics have rarely been evaluated. Using different numerical solution methods (including implicit and explicit approaches) and vertical discrete grid resolutions, we evaluated the numerical performance of a plant hydrodynamic module in the Functionally Assembled Terrestrial Ecosystem Simulator (FATES-HYDRO version 0.1) based on single-point and global simulations. Our simulation results showed that when near-surface vertical grid spacing is coarsened (grid size >10 cm), the model significantly overestimates aboveground biomass (AGB) in most of the temperate forest locations and underestimates AGB in the boreal forest locations, as compared to a simulation with finer vertical grid spacing. Grid coarsening has a small effect on AGB in the tropical zones of Asia and South America. In particular, coarse surface grid resolution should not be used when there are large and prolonged water content differences among soil layers at depths due to long dry-season duration and/or well-drained soil or when soil evaporation is a dominant fraction of evapotranspiration. Similarly, coarse surface grid resolution should not be used when there is lithologic discontinuity along the soil depth. This information is useful for uncertainty quantification, sensitivity analysis, or the training of surrogate models to design the simulations when computational cost limits the use of ensemble simulations.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Assessing the suitability of sites near Pine Island Glacier for subglacial bedrock drilling aimed at detecting Holocene retreat–readvance

Abstract. Unambiguous identification of past episodes of ice sheet thinning below the modern surface and grounding line retreat inboard of present requires recovery and exposure dating of subglacial bedrock. Such efforts are needed to understand the significance and potential future reversibility of ongoing and projected change in Antarctica. Here we evaluate the suitability for subglacial bedrock drilling of sites in the Hudson Mountains, which are located in the Amundsen Sea sector of West Antarctica. We use an ice sheet model and field data – geological observations, glaciological observations and bedrock samples from nunataks, and ground-penetrating radar from subglacial ridges – to rate each site against four key criteria: (i) presence of ridges extending below the ice sheet, (ii) likelihood of increased exposure of those ridges if the grounding line was inboard of present, (iii) suitability of bedrock for drilling and geochemical analysis, and (iv) accessibility for aircraft and drilling operations. Our results demonstrate that although no site in the Hudson Mountains is perfect for this study when assessed against all criteria, the accessibility, N–S orientation and basaltic bedrock lithology of Winkie Nunatak's southernmost ridge (74.86° S, 99.77° W) make it a feasible site both for drilling and subsequent cosmogenic nuclide analysis. Furthermore, the ridge is strewn with glacial erratics at all elevations, providing valuable constraints on its early Holocene deglacial history. Based on our experiences during this study, we conclude with a series of recommendations for assessing site suitability for future bedrock drilling campaigns. We emphasise the importance of consulting a range of expertise prior to drilling and ensuring that sufficient field reconnaissance is undertaken (including obtaining detailed grids of radar survey data and bedrock samples).

58 GEOSCIENCES↗
DOE OSTI2025

Integrated GW Farm ABM

This Data Repository includes data used for the integrated groundwater- farm ABM model, raw model output from scenario ensemble, and processed outputs that isolate the groundwater storage depletion outcomes for the 35,000 farm cells. Model Inputs: Farm ABM Inputs: This folder contains the input data used by the integrated groundwater - farm ABM modelling script (Python file) used for the high performance computing (HPC) experiments. The sub-folder "data inputs" contains all of the farm attribute data, while the three files in the folder have the hydrogeological data lookup table (NLDAS Cost Curve Attributes.csv), a lookup table (Theis well function table.csv) for the groundwater cost curve function, and the farm indexes and corresponding NLDAS ids for all of the cells run in this experiment (nldas farms subset final.csv). NLDAS Cost curve hydrogeological data: Hydrogeological data aggregated to 1/8 degree resolution and aligned with the NLDAS grid. Parameters include: water depth below ground surface [meters], subsurface porosity [unitless], aquifer depth from ground surface to aquifer bottom [meters], annual average recharge (USGS: mm, Doll: meters), and three different hydraulic conductivity (K) values (meters/day). The three K values represent the mean value from Gleeson et al. (2018), one standard deviation above the mean from Gleeson et al. (2018), and the de Graaf et al. 2020 modifications to certain lithologies. Additional information about these datasets and their processing are documented in the supplement to Yoon et al. 2025 (in review). Output: Raw outputs: This folder contains a .zip file that has model outputs for the entire scenario ensemble. There is one csv for each farm id, using the format "farm farmid cases.csv". The relationship between the farm id and NLDAS id is defined by the "nldas farms subset final.csv" located in the Farm ABM Inputs folder. Each csv has 625 rows, corresponding to 625 combinations of different scenario parameter values. Each row (scenario) represents the outcome of a 100 year simulation. Columns define scenario settings and summary statistics for each scenario. The first four columns define the scenario settings: "hydro ratio," "econ ratio," "K scenario," and "gamma scenario." The hydro and econ ratios are values passed to the modeling script that influence multipliers for other model parameters, as documented in the supplement to Yoon et al. 2025 (in review). The gamma multiplier is a coefficient multiplier applied to the baseline gamma values (values below 1 represent lower unobserved costs compared to baseline, values above 1 represent higher costs). The K scenario names represent K values of: "low": 0.5 m/d, "int 1": 2.5 m/d, "int 2": 10 m/d, "high": 50 m/d, and "gleeson": mean Gleeson K value. "Perc vol depleted" is the fraction of groundwater depleted at the end of the 100 simulation. Processed Output: Derived depletion outcomes from raw outputs: All of the individual csv files from the Raw outputs were aggregated into a single file that has the scenario settings and fraction depletion "Perc vol depleted" for every farm cell, for every scenario. The other two files define relationships between the farm id, NLDAS id, and local and major aquifer units, used for aquifer-level depletion analysis.

Agent based modeling↗
NASA NTRS1969

Geologic utility of small-scale airphotos

The geologic value of small scale airphotos is emphasized by describing the application of high altitude oblique and 1:120,000 to 1:145,000 scale vertical airphotos to several geologic problems in California. These examples show that small-scale airphotos can be of use to geologists in the following ways: (1) high altitude, high oblique airphotos show vast areas in one view; and (2) vertical airphotos offer the most efficient method of discovering the major topographic features and structural and lithologic characteristics of terrain.

Clark, M. M.↗
NASA NTRS1972

Luminescence analysis of lunar samples returned by Apollo: Luminescence of Apollo 14 and Apollo 15 lunar samples

Luminescence measurements were made of Apollo 14 lunar samples with far UV X-ray, and proton irradiation and of Apollo 15 lunar samples with X-ray irradiation. Preliminary efficiencies with the far UV are in the range 0.001 to 0.01; efficiencies with X-rays and protons are in the range 10 to the -8th to 10 to the -6th powers. The crystalline igneous rocks show higher efficiencies, in general, than the breccias and glasses, and the ratio of intensity of the green to the blue luminescence peak tends to be higher for the crystalline igneous rocks than for breccias and glasses. Therefore, both the efficiency and the spectral character appear to have a systematic relationship to lithologic type (granitic versus gabbroic versus fragmental) and to geologic history and processes on the moon (shocked versus unshocked or only mildly shocked material).

Greenman, N. N.↗
NASA NTRS1972

Preliminary geologic map of the region around the candidate Proclus Apollo landing site, part J

The Proclus Crater region was mapped to test the value, for photogeologic mapping purposes, of Apollo 15 metric photographs and to estimate the scientific value of the area as a potential landing site. Adjacent frames of the metric photography were overlapped with the base frame to provide stereographic images. Because of the high quality of the photographs, it was found that the geologic units could be more definitely interpreted and dated than those of earlier maps. The photographs tend to confirm the earlier interpretation of the rugged area as composed of bedrock uplifted when the Crisium basin formed. They also suggest that an earlier predominantly volcanic interpretation of the terra in this area might be replaced by an interpretation in which mass wasting and fracturing play the major roles in producing different terrain types. It was concluded that because of apparent lithologic homogeneity, the terra of the Proclus region is an undesirable objective for an extensive manned lunar landing mission.

Wilhelms, D. E.↗
NASA NTRS1972

Geology of Hadley Rille

The regional setting, external and internal shape, and materials of Hadley Rille near the Apollo 15 landing site are described. The petrography presented includes lithologies, regolith, talus, and outcrops. The stratigraphy exposed on the rille wall is also considered.

Howard, K. A.↗
NASA NTRS1971

Remote sensing of some sedimentary rocks.

Sedimentary rocks including varying sized clastics and carbonates were overflown by aircraft between 1966 and 1971 producing data in the ultraviolet to microwave regions of the electromagnetic spectrum. This paper reports that multispectral analysis increases the ease and rapidity of discrimination of rock types having subtle differences in physical characteristics, but fails to enhance and may degrade distinctions where physical characteristics are significantly different. Brief resumes of color and color IR photographic data are presented. Thermal infrared is found to be useful in the mapping of rock units, but limitations such as moisture variation, soil cover, and vegetation may exceed in one formation the distinction between differing lithologies. A brief review of previously published SLAR data is included for completeness. Remote sensing techniques should reduce field geological effort by as much as 50%.

Brennan, P. A.↗
NASA NTRS1972

Mapping of the major structures of the African rift system

The author has identified the following significant results. ERTS-1 imagery of the African rift system resolves the major Cenozoic faults, zones of warping, and the associated volcanism. It also clearly depicts the crustal grain of the Precambrian rocks where these are exposed. New structural features, or new properties of known features such as greater extent, continuity, linearity, etc., are revealed by the ERTS-1 imagery. This applies to the NE-SW fracture zones in Yemen, the Aswa mylonite zone at the northern end of the Western Rift, the Nandi fault of western Kenya, the arcuate faults of the Elgeyo escarpment in the Gregory rift, and hemi-basins of warped Tertiary lavas on the Red Sea margin of Yemen, matching those of the Ethiopian plateau-Afar margin. A tentative scheme is proposed, relating the effect on the pattern of Cenozoic faulting of the degree of obliquity to Precambrian structural trend. Some ground-mapped lithological boundaries are obscure on ERTS-1 imagery. The present approaches to mapping of Precambrian terrain in Africa may require radical revision with the input of satellite imagery.

Mohr, P. A.↗
NASA NTRS1972

Afar and ERTS-1 imagery

The author has identified the following significant results. The excellent ERTS-1 imagery of the Afar region of Ethiopia permits a preliminary revision to the analysis of the structures of this triple-rift junction, and also revisions to the outcrops of some lithological formations. The fault-belts of the Afar floor can now be mapped in fine detail. The Danakil horst is identified to be limited on its western side against Afar by a major fault-line, and it seems unlikely that the horst is the exposed, easterly portion of a west-dipping sialic block underlying all northern Afar. The Salt Plain appears to be a true graben. The Ethiopian plateau-Afar margin consists of a series of right-offset sectors, the offsets being marked by silicic volcanic centers. The nature of these offsets is related to the vexed question of cross-rift faulting. Such faulting is identifiable on the ERTS-1 imagery, both on the Afar floor, and in the monoclinally warped western margin. The significance of this faulting, though subordinate to the tensional faults of the fault-belts, awaits elucidation.

Mohr, P. A.↗
NASA NTRS1972

Geology of Utah and Nevada by ERTS imagery

The author has identified the following significant results. Imagery for a portion of the study area was received, catalogued for in-house availability, and examined for relevant data. Topographic, geologic, aeromagnetic, and gravity maps were gathered to form a basis of comparison. Overlay drawings were prepared indicating significant features for further study and eventual field checking. The number of significant observations appears to be very great, and it is apparent that methods of handling the acquired information for easy access, for planning field checks, and for final presentation, must be improved. The tracing of lithologic variations and contacts is readily noted on many of the images. Some of the features vary from what is shown on geological maps but the correlation, or lack of same, is still to be studied in the field and by comparison of ground truth geological maps with the specific images. Numerous lineaments, based on tonal differences, are noted in the districts, some of which extend for tens of kilometers. Several positive and negative magnetic anomalies are noted with the suggestion that the sources of the mineralizing fluids were derived from hidden intrusives.

Jensen, M. L.↗
NASA NTRS1972

ERTS-1 imagery of eastern Africa: A first look at the geological structure of selected areas

The author has identified the following significant results. Imagery of the African rift system resolves the major Cainozoic faults, zones of warping, and associated volcanism. It also clearly depicts the crystal grain of the Precambrian rocks where these are exposed. New structural features, or new properties of known features such as greater extent, continuity, and linearity are revealed by ERTS-1 imagery. This applies, for example, to the NE-SW fracture zones in Yemen, the Aswa mylonite zone at the northern end of the Western Rift, the Nandi fault of western Kenya, the linear faults of the Elgeyo escarpment in the Gregory Rift, and the hemibasins of warped Tertiary lavas on the Red Sea margin of Yemen, matching those of Ethiopian plateau-Afar margin. A tentative scheme is proposed, relating the effect on the pattern of Cainozoic faulting of the degree of obliquity to Precambrian structural trend. It is particularly noteworthy that, even where the Precambrian grain determines the rift faulting to be markedly oblique to the overall trend of the rift trough, for example, in central Lake Tanganyika, the width of the trough is not significantly increased. Some ground mapped lithological boundaries are obscure on ERTS-1 imagery.

Mohr, P. A.↗
NASA NTRS1973

Analysis of ERTS-1 imagery of Wyoming and its application to evaluation of Wyoming's natural resources

The author has identified the following significant results. Significant results of the Wyoming investigation during the first six months include: (1) successful segregation of Precambrian metasedimentary/metavolcanic rocks from igneous rocks; (2) discovery of iron formation within the metasedimentary sequence; (3) mapping of previously unreported tectonic elements of major significance; (4) successful mapping of large scale fractures of the Wind River Mountains; (5) sucessful distinction of some metamorphic, igneous, and sedimentary lithologies by color-additive viewing of ERTS images; (6) mapping and interpretation of glacial features in western Wyoming; and (7) development of techniques for mapping small urban areas.

Marrs, R. W.↗
NASA NTRS1973

Facilitating the exploitation of ERTS imagery using snow enhancement techniques

The author has identified the following significant results. New fracture detail within New England test area has been interpreted from ERTS-1 images. Comparative analysis of snow-free imagery (1096-15065 and 1096-15072) has demonstrated that MSS bands 5 and 7 supply the greatest amount of geological fracture detail. Interpretation of the first snow-covered ERTS-1 images (1132-15074 and 1168-15065) in correlation with ground snow depth data indicates that a heavy blanket of snow (less than 9 inches) accentuates major structural features while a light dusting (greater than 1 inch) accentuates more subtle topographic expressions. Snow cover was found to accentuate drainage patterns which are indicative of lithological and/or structural variations. Snow cover provided added enhancement for viewing and detecting topographically expressed fractures and faults. A recent field investigation was conducted within the New England test area to field check lineaments observed from analysis of ERTS-1 imagery, collect snow depth readings, and obtain structural joint readings at key locations in the test area.

Wobber, F. J.↗
NASA NTRS1973

Geologic and mineral and water resources investigations in western Colorado using ERTS-1 data

The author has identified the following significant results. Geologic interpretation of ERTS-1 imagery is dependent on recognition of the distribution, continuity, trend, and geometry of key surface features. In the examination of ERTS-1 imagery, lithology must be interpreted largely from the geomorphic expression of the terrain. ERTS-1 imagery is extremely useful in detecting local structures. Most mapped structures are topographically-expressed. Consequently, ERTS-1 imagery acquired during mid-winter, when the solar illumination angle is low, provides the largest amount of structural information. Stereoscopic analyses of ERTS-1 images significantly aid geologic interpretation. Positive transparencies of ERTS-1 images (1:1,000,000) commonly contain more geologic information than can be adequately annotated during geologic interpretation.

Knepper, D. H., Jr.↗
NASA NTRS1973

An evaluation of the suitability of ERTS data for the purposes of petroleum exploration

The author has identified the following significant results. ERTS-1 imagery seems to be good to excellent for reconnaissance level investigations of large sedimentary basins such as the Anadarko Basin. Many lithologic boundaries, and geomorphic features, and linear features inferred to be indicative of geologic structure are visible in the imagery. This imagery in conjunction with high altitude photography seems to be useful as a tool for intermediate level geologic exploration. Several types of crudely circular anomalous features, such as geomorphic/structural anomalies, hazy areas and tonal anomalies, are identifiable in the imagery. There seems to be a strong correlation between the geomorphic/structural and hazy anomalies and known structurally controlled oil and gas fields. The features recognizable on ERTS-1 imagery and their ease of recognition vary from area to area even in imagery acquired at the same time under essentially uniform atmospheric conditions. Repeated coverage is exceedingly valuable in geologic applications. One time complete coverage even for the various seasons does not reveal all the features that ERTS-1 can reveal.

Collins, R. J., Jr.↗
NASA NTRS1973

Capability of ERTS-1 imagery to investigate geological and structural features in a sedimentary basin (Bassin Parisien, France)

The author has identified the following significant results. The region covered by the MSS images has the benefit of complete geological mapping at scales of 1:80,000, 1:320,000, and 1:1,000,000. Comparison of imagery and exisiting geological maps, particularly the 1:1,000,000 scale, produces important information: (1) Good correspondence is seen between large units distinguished on the images and the concentric strata of the Jurassic, Cretaceous, and Paleocene on the map. (2) Comparison of MSS images with the hydrogeological map of the Parisian basin at 1:500,000 removes all ambiguity with regard to lithological variations. Among the many faults revealed, only three were considered: (1) the Metz; (2)Juranze; and (3) the double fault of the Marne. Imagery shows a conspicuous alignment of the Metz fault unknown until now and ending near Montereau against the group of north-south faults between Montargis and Bourbon l'Archambault. MSS images show that the Juranze fault divides beyond Brienne into two branches of equal importance. The northern one represents the known fault, the southern one was not known until now, but the convergence of the faults constitutes a tectonic trap. The double fault of the Marne is known for a total length of 50 km. ERTS-1 imagery suggest a prolongation toward the southeast which could bring its length to 110 km.

Weecksteen, G.↗