SEARCH · Engineering Papers

Results for “linear algebra”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

All sources NASA NTRS DOE OSTI

NASA NTRS1989

An implicit and stiffly stable finite element CFD algorithm for unsteady aerodynamics

A stable and accurate finite element CFD algorithm for hyperbolic/incompletely parabolic conservation law systems is described and verified. It combines a Taylor weak statement FEM, an optimal implicit Runge-Kutta time integration algorithm, and a matrix tensor product approximate factorization linear algebra procedure. The results of computational experiments show that the developed algorithm is robust.

Baker, A. J.↗

NASA NTRS1988

Optical matrix-vector processing for computational fluid dynamics

An optical processor to solve partial differential equations for computational fluid dynamics applications is considered. This application is new and original for optical processors. The algorithms that are used are optical realizations of the Newton-Raphson method for nonlinear equations and a new optical LU direct decomposition and Gauss-Seidel iterative solution to the resultant linear algebraic equations. These algorithms are used to solve Burger's equation (a specific form of the momentum equation in fluid dynamics). The nonlinear equations provide 1-D velocity data at each time step. Simulation results of optical processing with these algorithms on computational fluid dynamics data is included.

Perlee, Caroline J.↗

NASA NTRS1989

Atomic data for opacity calculations. X - Oscillator strengths and photoionisation cross sections for O III

Energy levels and electric dipole radiative transitions were determined for O III. The wavefunctions for the bound and continuum states were derived by solving coupled integrodifferential equations in the close-coupling approximation with the aid of two methods, the R-matrix and linear algebraic methods. Configuration interaction wavefunctions are presented for eight states of the O IV target with configurations of 2s(x)sp(y) (x + y = 3). Oscillator strengths are calculated for the transitions between, and photoionization cross sections from, bound states of O III with configurations of 2s(x)2p(y)nl (for n of not greater than 10 and l of not greater than 3).

Luo, D.↗

NASA NTRS1990

Simultaneous expansion and orthogonalization of measured modes for structure identification

Tests of large structures on-orbit will be performed with measurements at a relatively few structure points. Values for the unmeasured degrees of freedom (dofs) can be estimated based on measured dofs and analytical model dynamic information. These 'expanded' mode shapes are useful for optimal-update identification and damage location as well as test/analysis correlation. A new method of expansion for test mode shape vectors is developed from the orthogonal Procrustes problem from computational linear algebra. A subspace defined by the set of measured dofs is compared to a subspace defined by mode shapes from an analytical model of the structure. The method simultaneously expands and orthogonalizes the mode shape vectors. Two demonstration problems are used to compare the new method to current expansion techniques. One demonstration uses test data from a laboratory scale-model truss structure. Performance of the new method is comparable or superior to that of the previous expansion methods which require separate orthogonalization.

Smith, Suzanne Weaver↗

NASA NTRS1990

Improved solution for system identification equations by Epsilon-Decomposition

Matrix eigenvalue theory is used to examine the source of ill-conditioning in linear algebraic equations. This approach highlights the crucial role played by the zero and near-zero eigenvalues and corresponding eigenvectors of poorly conditioned systems. Insight gained from this approach is used to significantly improve a recently developed solution procedure called Epsilon-Decomposition (E-D). E-D is an efficient alternative to Singular Value Decomposition (SVD) for ill-conditioned systems arising in parameter estimation and system identification studies. The efficiency of the improved E-D over SVD resides in the need to only obtain the zero and near-zero eigenvalues of the coefficient matrix as opposed to all of its eigenvalues and vectors (as required by SVD). Thus, the efficiency of E-D is significant for large matrices with small rank deficiency.

Ojalvo, Irving U.↗

NASA NTRS1990

SPARSKIT: A basic tool kit for sparse matrix computations

Presented here are the main features of a tool package for manipulating and working with sparse matrices. One of the goals of the package is to provide basic tools to facilitate the exchange of software and data between researchers in sparse matrix computations. The starting point is the Harwell/Boeing collection of matrices for which the authors provide a number of tools. Among other things, the package provides programs for converting data structures, printing simple statistics on a matrix, plotting a matrix profile, and performing linear algebra operations with sparse matrices.

Saad, Youcef↗

NASA NTRS1991

A globally well-posed finite element algorithm for aerodynamics applications

A finite element CFD algorithm is developed for Euler and Navier-Stokes aerodynamic applications. For the linear basis, the resultant approximation is at least second-order-accurate in time and space for synergistic use of three procedures: (1) a Taylor weak statement, which provides for derivation of companion conservation law systems with embedded dispersion-error control mechanisms; (2) a stiffly stable second-order-accurate implicit Rosenbrock-Runge-Kutta temporal algorithm; and (3) a matrix tensor product factorization that permits efficient numerical linear algebra handling of the terminal large-matrix statement. Thorough analyses are presented regarding well-posed boundary conditions for inviscid and viscous flow specifications. Numerical solutions are generated and compared for critical evaluation of quasi-one- and two-dimensional Euler and Navier-Stokes benchmark test problems.

Iannelli, G. S.↗

NASA NTRS1990

Domain decomposition methods in aerodynamics

Compressible Euler equations are solved for two-dimensional problems by a preconditioned conjugate gradient-like technique. An approximate Riemann solver is used to compute the numerical fluxes to second order accuracy in space. Two ways to achieve parallelism are tested, one which makes use of parallelism inherent in triangular solves and the other which employs domain decomposition techniques. The vectorization/parallelism in triangular solves is realized by the use of a recording technique called wavefront ordering. This process involves the interpretation of the triangular matrix as a directed graph and the analysis of the data dependencies. It is noted that the factorization can also be done in parallel with the wave front ordering. The performances of two ways of partitioning the domain, strips and slabs, are compared. Results on Cray YMP are reported for an inviscid transonic test case. The performances of linear algebra kernels are also reported.

Venkatakrishnan, V.↗

NASA NTRS1991

Experiments with conjugate gradient algorithms for homotopy curve tracking

There are algorithms for finding zeros or fixed points of nonlinear systems of equations that are globally convergent for almost all starting points, i.e., with probability one. The essence of all such algorithms is the construction of an appropriate homotopy map and then tracking some smooth curve in the zero set of this homotopy map. HOMPACK is a mathematical software package implementing globally convergent homotopy algorithms with three different techniques for tracking a homotopy zero curve, and has separate routines for dense and sparse Jacobian matrices. The HOMPACK algorithms for sparse Jacobian matrices use a preconditioned conjugate gradient algorithm for the computation of the kernel of the homotopy Jacobian matrix, a required linear algebra step for homotopy curve tracking. Here, variants of the conjugate gradient algorithm are implemented in the context of homotopy curve tracking and compared with Craig's preconditioned conjugate gradient method used in HOMPACK. The test problems used include actual large scale, sparse structural mechanics problems.

Irani, Kashmira M.↗

NASA NTRS1992

Accuracies Of Optical Processors For Adaptive Optics

Paper presents analysis of accuracies and requirements concerning accuracies of optical linear-algebra processors (OLAP's) in adaptive-optics imaging systems. Much faster than digital electronic processor and eliminate some residual distortion. Question whether errors introduced by analog processing of OLAP overcome advantage of greater speed. Paper addresses issue by presenting estimate of accuracy required in general OLAP that yields smaller average residual aberration of wave front than digital electronic processor computing at given speed.

Downie, John D.↗

NASA NTRS1992

An approximate solution for interlaminar stresses in laminated composites: Applied mechanics program

An approximate solution for interlaminar stresses in finite width, laminated composites subjected to uniform extensional, and bending loads is presented. The solution is based upon the principle of minimum complementary energy and an assumed, statically admissible stress state, derived by considering local material mismatch effects and global equilibrium requirements. The stresses in each layer are approximated by polynomial functions of the thickness coordinate, multiplied by combinations of exponential functions of the in-plane coordinate, expressed in terms of fourteen unknown decay parameters. Imposing the stationary condition of the laminate complementary energy with respect to the unknown variables yields a system of fourteen non-linear algebraic equations for the parameters. Newton's method is implemented to solve this system. Once the parameters are known, the stresses can be easily determined at any point in the laminate. Results are presented for through-thickness and interlaminar stress distributions for angle-ply, cross-ply (symmetric and unsymmetric laminates), and quasi-isotropic laminates subjected to uniform extension and bending. It is shown that the solution compares well with existing finite element solutions and represents an improved approximate solution for interlaminar stresses, primarily at interfaces where global equilibrium is satisfied by the in-plane stresses, but large local mismatch in properties requires the presence of interlaminar stresses.

Rose, Cheryl A.↗

NASA NTRS1992

A non-linearly stable implicit finite element algorithm for hypersonic aerodynamics

A generalized curvilinear coordinate Taylor weak statement implicit finite element algorithm is developed for the two-dimensional and axisymmetric compressible Navier-Stokes equations for ideal and reacting gases. For accurate hypersonic simulation, air is modeled as a mixture of five perfect gases, i.e., molecular and atomic oxygen and nitrogen as well as nitric oxide. The associated pressure is then determined via Newton solution of the classical chemical equilibrium equation system. The directional semidiscretization is achieved using an optimal metric data Galerkin finite element weak statement, on a developed 'companion conservation law system', permitting classical test and trial space definitions. Utilizing an implicit Runge-Kutta scheme, the terminal algorithm is then nonlinearly stable, and second-order accurate in space and time on arbitrary curvilinear coordinates. Subsequently, a matrix tensor product factorization procedure permits an efficient numerical linear algebra handling for large Courant numbers. For ideal- and real-gas hypersonic flows, the algorithm generates essentially nonoscillatory numerical solutions in the presence of strong detached shocks and boundary layer-inviscid flow interactions.

Iannelli, G. S.↗

NASA NTRS1992

Optimal matrix approximants in structural identification

Problems of model correlation and system identification are central in the design, analysis, and control of large space structures. Of the numerous methods that have been proposed, many are based on finding minimal adjustments to a model matrix sufficient to introduce some desirable quality into that matrix. In this work, several of these methods are reviewed, placed in a modern framework, and linked to other previously known ideas in computational linear algebra and optimization. This new framework provides a point of departure for a number of new methods which are introduced here. Significant among these is a method for stiffness matrix adjustment which preserves the sparsity pattern of an original matrix, requires comparatively modest computational resources, and allows robust handling of noisy modal data. Numerical examples are included to illustrate the methods presented herein.

Beattie, C. A.↗

NASA NTRS1992

Lunar materials processing system integration

The theme of this paper is that governmental resources will not permit the simultaneous development of all viable lunar materials processing (LMP) candidates. Choices will inevitably be made, based on the results of system integration trade studies comparing candidates to each other for high-leverage applications. It is in the best long-term interest of the LMP community to lead the selection process itself, quickly and practically. The paper is in five parts. The first part explains what systems integration means and why the specialized field of LMP needs this activity now. The second part defines the integration context for LMP -- by outlining potential lunar base functions, their interrelationships and constraints. The third part establishes perspective for prioritizing the development of LMP methods, by estimating realistic scope, scale, and timing of lunar operations. The fourth part describes the use of one type of analytical tool for gaining understanding of system interactions: the input/output model. A simple example solved with linear algebra is used to illustrate. The fifth and closing part identifies specific steps needed to refine the current ability to study lunar base system integration. Research specialists have a crucial role to play now in providing the data upon which this refinement process must be based.

Sherwood, Brent↗

NASA NTRS1993

Vector formulation for interferogram surface fitting

Interferometry is an optical testing technique that quantifies the optical path difference (OPD) between a reference wave front and a test wave front based on the interference of light. Fringes are formed when the OPD is an integral multiple of the illuminating wavelength. The resultant two-dimensional pattern is called an interferogram. The function of any interferogram analysis program is to extract this OPD and to produce a representation of the test wave front (or surface). This is accomplished through a three-step process of sampling, ordering, and fitting. We develop a generalized linear-algebra vector-notation model of the interferogram sampling and fitting process.

Fischer, David J.↗

NASA NTRS1990

Simplified detection and correction of critical data for ill-conditioned systems

Ill-conditioned systems arising in analysis and optimization can display a high sensitivity to numerical precision for changes and errors in data input. Such data may be in the form of system parameter input or desired system response. The ill-conditioning referred to generally arises from the lack of sufficient independent data to define a complex system or the weak sensitivity of response to source input parameters. It is shown how small errors in data and assumed fixed and known parameters can lead to highly erroneous results in ill-conditioned linear algebraic equations. A simplified detection and correction of critical input data arising in the coefficient matrix and desired response (i.e., right hand side) is proposed.

Ojalvo, Irving U.↗

NASA NTRS1991

Automated ILA design for synchronous sequential circuits

An iterative logic array (ILA) architecture for synchronous sequential circuits is presented. This technique utilizes linear algebra to produce the design equations. The ILA realization of synchronous sequential logic can be fully automated with a computer program. A programmable design procedure is proposed to fullfill the design task and layout generation. A software algorithm in the C language has been developed and tested to generate 1 micron CMOS layouts using the Hewlett-Packard FUNGEN module generator shell.

Liu, M. N.↗

NASA NTRS1996

Numerical Modeling of Spray Combustion with an Unstructured-Grid Method

The present unstructured-grid method follows strictly the basic finite volume forms of the conservation laws of the governing equations for the entire flow domain. High-order spatially accurate formulation has been employed for the numerical solutions of the Navier-Stokes equations. A two-equation k-epsilon turbulence model is also incorporated in the unstructured-grid solver. The convergence of the resulted linear algebraic equation is accelerated with preconditioned Conjugate Gradient method. A statistical spray combustion model has been incorporated into the present unstructured-grid solver. In this model, spray is represented by discrete particles, rather than by continuous distributions. A finite number of computational particles are used to predict a sample of total population of particles. Particle trajectories are integrated using their momentum and motion equations and particles exchange mass, momentum and energy with the gas within the computational cell in which they are located. The interaction calculations are performed simultaneously and eliminate global iteration for the two-phase momentum exchange. A transient spray flame in a high pressure combustion chamber is predicted and then the solution of liquid-fuel combusting flow with a rotating cup atomizer is presented and compared with the experimental data. The major conclusion of this investigation is that the unstructured-grid method can be employed to study very complicated flow fields of turbulent spray combustion. Grid adaptation can be easily achieved in any flow domain such as droplet evaporation and combustion zone. Future applications of the present model can be found in the full three-dimensional study of flow fields of gas turbine and liquid propulsion engine combustion chambers with multi-injectors.

Shang, H. M.↗