Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “implosion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

A direct-drive exploding-pusher implosion as the first step in development of a monoenergetic charged-particle backlighting platforn at the National Ignition Facility

A thin-glass-shell, D 3 He-filled exploding-pusher inertial confinement fusion implosion at the National Ignition Facility (NIF) has been demonstrated as a proton source that serves as a promising first step toward development of a monoenergetic proton, alpha, and triton backlighting platform at the NIF. Among the key measurements, the D3He-proton emission on this experiment (shot N121128) has been well-characterized spectrally, temporally, and in terms of emission isotropy, revealing a highly monoenergetic (ΔE/E~4%) and isotropic source (~3% proton fluence variation and ~0.5% proton energy variation). On a similar shot (N130129, with D 2 fill), the DD-proton spectrum has been obtained as well, illustrating that monoenergetic protons of multiple energies may be utilized in a single experiment. In conclusion, these results, and experiments on OMEGA, point toward future steps in the development of a precision, monoenergetic proton, alpha, and triton source that can readily be implemented at the NIF for backlighting a broad range of high energy density physics (HEDP) experiments in which fields and flows are manifest, and also utilized for studies of stopping power in warm dense matter and in classical plasmas.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Electron-positron pair creation in the electric fields generated by micro-bubble implosions

Here, we show that electron-positron pair production from the vacuum is possible via the strong Coulomb fields generated by micro-bubble implosions induced by ultra-high intensity lasers. Even in the case where the Coulomb fields are lower than the pair creation threshold, externally injected high energy electrons or photons could be used to generate pairs.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Towards an Integrated Model of the NIC Layered Implosions

A detailed simulation-based model of the June 2011 National Ignition Campaign (NIC) cryogenic DT experiments is presented. The model is based on integrated hohlraum-capsule simulations that utilize the best available models for the hohlraum wall, ablator, and DT equations of state and opacities. The calculated radiation drive was adjusted by changing the input laser power to match the experimentally measured shock speeds, shock merger times, peak implosion velocity, and bangtime. The crossbeam energy transfer model was tuned to match the measured time-dependent symmetry. Mid-mode mix was included by directly modeling the ablator and ice surface perturbations up to mode 60. Simulated experimental values were extracted from the simulation and compared against the experiment. The model adjustments brought much of the simulated data into closer agreement with the experiment, with the notable exception of the measured yields, which were 15-45% of the calculated yields.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Implosion and core heating requirements in subignition experiments FIREX-I

In the fast ignition realization experiment project phase-I (FIREX-I) [H. Azechi and the FIREX Project, Plasma Phys. Control. Fusion 48, B267 (2006)], core heating up to an ion temperature of 5 keV is expected for subignition-class carbon-deuterium (CD) and deuterium-tritium (DT) fuels. The dependence of the achieved ion temperature on heating pulse parameters, and core density is investigated using two-dimensional simulations. Since the core size in FIREX-I is insufficient for self-ignition, and the confinement time is comparable to the heating duration ({approx}10 ps), the temperature relaxation between the bulk electrons and ions is important for efficient ion heating. High compression (a core density of {rho}>200 g/cm{sup 3}) is required for pure DT fuel to shorten the relaxation time. In this case, a heating energy of E{sub h}>2 kJ and a duration of {tau}{sub h}<10 ps are required to achieve an ion temperature of 5 keV. For CD and DT+foam fuels, the requirement for implosion is relaxed since the relaxation is fast, due to a large effective charge; 5 keV ion heating is achieved at {rho}{>=}50 g/cm{sup 3} with E{sub h}>2 kJ and {tau}{sub h}{approx}10 ps.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Spectroscopic study of temperature and density spatial profiles and mix in implosion cores

New techniques of x-ray spectroscopy have been developed to extract the temperature and density spatial structure of implosion cores. Results from an emissivity analysis, which neglects optical depth effects, compare well with the independent results of an intensity analysis used in the low optical depth limit. The intensity analysis has also been applied in its full form, in which case density spatial profiles demonstrate significant opacity effects. The emissivity and intensity analyses were combined to infer the spatial profile of mixing between shell and fuel material. This experimentally-derived information on mix is compared with predictions from two standard theoretical mix models.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ablation dominated implosion dynamics of aluminum and stainless steel nested cylindrical wire arrays

The results of experiments with combined aluminum (Al) and stainless steel (SS) alloy 304, nested wire arrays from the 1 MA COBRA generator at Cornell University are presented. The loads studied consisted of a 6 mm diameter inner array and a 13 mm diameter outer array with a different material in each array: SS or aluminum. Al implodes before SS in all loads studied, even when Al was on the inner array. The new wire ablation dynamic model and spectroscopic modeling are used to interpret these data. The observed implosion dynamics are likely a result of the higher ablation rate of Al. These initial results suggest that combining wire materials with different ablation rates in wire array loads could be developed into a useful technique for x-ray pulse shaping and radiation yield optimization.

36 MATERIALS SCIENCE↗

Anomalous yield reduction in direct-drive deuterium/tritium implosions due to {sup 3}He addition

Glass capsules were imploded in direct drive on the OMEGA laser [Boehly et al., Opt. Commun. 133, 495 (1997)] to look for anomalous degradation in deuterium/tritium (DT) yield and changes in reaction history with {sup 3}He addition. Such anomalies have previously been reported for D/{sup 3}He plasmas but had not yet been investigated for DT/{sup 3}He. Anomalies such as these provide fertile ground for furthering our physics understanding of inertial confinement fusion implosions and capsule performance. Anomalous degradation in the compression component of yield was observed, consistent with the ''factor of 2'' degradation previously reported by Massachusetts Institute of Technology (MIT) at a 50%{sup 3}He atom fraction in D{sub 2} using plastic capsules [Rygg, Phys. Plasmas 13, 052702 (2006)]. However, clean calculations (i.e., no fuel-shell mixing) predict the shock component of yield quite well, contrary to the result reported by MIT but consistent with Los Alamos National Laboratory results in D{sub 2}/{sup 3}He[Wilson et al., J. Phys.: Conf. Ser. 112, 022015 (2008)]. X-ray imaging suggests less-than-predicted compression of capsules containing {sup 3}He. Leading candidate explanations are poorly understood equation of state for gas mixtures and unanticipated particle pressure variation with increasing {sup 3}He addition.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Acceleration of negative ions by Coulomb implosion mechanism

Generation of high energy negative ions by laser-plasma interaction is studied theoretically and numerically. New acceleration process called Coulomb implosion mechanism is proposed, which explains efficient acceleration of negative ions from laser-plasmas. The model is confirmed by using 2-dimensional Particle-in-Cell simulations. Experimental evidence of negative ion acceleration from cluster target is also presented.

43 PARTICLE ACCELERATORS↗

Spectroscopic modeling of an argon-doped shock-ignition implosion

We present results from the spectral postprocessing of a one-dimensional hydrodynamic simulation of an argon-doped, warm-shell shock-ignition implosion with a detailed atomic and radiation physics model. The argon tracer is added to the deuterium filling in the core for diagnostic purposes. Spectral features in the emergent intensity distribution in the photon energy range of the argon K-shell spectrum that have potential for diagnostic application are discussed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Study of transparent and nontransparent regimes of implosion in star wire arrays

Star wire arrays were used to control the imploding plasma flows and study plasma interpenetration. These arrays consisted of linear 'rays' aligned azimuthally and extending from the vertical axis. Star arrays with two close located wires ('gates') instead of a single wire on the inner cylinder were studied for transparent and nontransparent regimes of propagation of imploding plasma through the gates. Nontransparent mode of collision is typical for regular star wire arrays and it was also observed in Al stars with gate wires of regular length and with the gate width of 0.3-2 mm. The cascade process of implosion in stars and trapping of imploding plasma in 1-2 mm gates were modeled with the three-dimensional resistive magnetohydrodynamics code. The intermediate semitransparent mode of collision was observed in Al stars with long Al 'gate' wires. A transparent mode was observed in Al stars with long stainless steel or W gate wires. Applications of wire arrays with controlled plasma flows are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Two-dimensional simulations of the neutron yield in cryogenic deuterium-tritium implosions on OMEGA

Maximizing the neutron yield to obtain energy gain is the ultimate goal for inertial confinement fusion. Nonuniformities seeded by target and laser perturbations can disrupt neutron production via the Rayleigh-Taylor instability growth. To understand the effects of perturbations on the neutron yield of cryogenic DT implosions on the Omega Laser Facility [T. R. Boehly et al., Opt. Commun. 133, 495 (1997)], two-dimensional DRACO[P. B. Radha et al., Phys. Plasmas 12, 056307 (2005)] simulations have been performed to systematically investigate each perturbation source and their combined effects on the neutron-yield performance. Two sources of nonuniformity accounted for the neutron-yield reduction in DRACO simulations: target offset from the target chamber center and laser imprinting. The integrated simulations for individual shots reproduce the experimental yield-over-clean (YOC) ratio within a factor of 2 or better. The simulated neutron-averaged ion temperatures <T{sub i}> is only about 10%-15% higher than measurements. By defining the temperature-over-clean, its relationship to YOC provides an indication of how much the hot-spot volume and density are perturbed with respect to the uniform situation. Typically, the YOC in OMEGA experiments is of the order of {approx}5%. The simulation results suggest that YOC can be increased to the ignition hydroequivalent level of 15%-20% (with <{rho}R>=200-300 mg/cm{sup 2}) by maintaining a target offset of less than 10 {mu}m and employing beam smoothing by spectral dispersion.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Implosion and explosion of electrostatic cylindrical and spherical shocks in asymmetric pair-ion plasmas

Nonlinear electrostatic shock waves are studied in unmagnetized, dissipative pair-ion plasmas. The dissipation in the system is taken into account by considering the effect of kinematic viscosity of both positive and negative ions in plasmas. The system of fluid equations for asymmetric pair-ion plasma is reduced to Korteweg-deVries-Burgers equation in the limit of small amplitude perturbation. It is observed that the system under consideration admits rarefactive shocks. Keeping in view the practical applications, the nonlinear propagation of both the exploding and imploding shocks is investigated and the differences are expounded in detail. The present study may have relevance in the study of the formation of electrostatic shocks in laser-induced implosion devices, star formation, supernovae explosion, etc.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Wire number dependence of the implosion dynamics, stagnation, and radiation output of tungsten wire arrays at Z driver

We report results of the experimental campaign, which studied the initiation, implosion dynamics, and radiation yield of tungsten wire arrays as a function of the wire number. The wire array dimensions and mass were those of interest for the Z-pinch driven Inertial Confinement Fusion (ICF) program. An optimization study of the x-ray emitted peak power, rise time, and full width at half maximum was effectuated by varying the wire number while keeping the total array mass constant and equal to {approx}5.8 mg. The driver utilized was the {approx}20-MA Z accelerator before refurbishment in its usual short pulse mode of 100 ns. We studied single arrays of 20-mm diameter and 1-cm height. The smaller wire number studied was 30 and the largest 600. It appears that 600 is the highest achievable wire number with present day's technology. Radial and axial diagnostics were utilized including crystal monochromatic x-ray backlighter. An optimum wire number of {approx}375 was observed which was very close to the routinely utilized 300 for the ICF program in Sandia.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Hard x-ray (>100 keV) imager to measure hot electron preheat for indirectly driven capsule implosions on the NIF

We have fielded a hard x-ray (>100 keV) imager with high aspect ratio pinholes to measure the spatially resolved bremsstrahlung emission from energetic electrons slowing in a plastic ablator shell during indirectly driven implosions at the National Ignition Facility. These electrons are generated in laser plasma interactions and are a source of preheat to the deuterium-tritium fuel. First measurements show that hot electron preheat does not limit obtaining the fuel areal densities required for ignition and burn.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Shell trajectory measurements from direct-drive implosion experiments

A technique to measure the shell trajectory in direct-drive inertial confinement fusion implosions is presented. The x-ray self emission of the target is measured with an x-ray framing camera. Optimized filtering limits the x-ray emission from the corona plasma, isolating a sharp intensity gradient very near the ablation surface. This enables one to measure the radius of the imploding shell with an accuracy better than 1 {mu}m and to determine a 200-ps average velocity to better than 2%.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Extremely high-pressure generation and compression with laser implosion plasmas

We have tested a scheme for using laser implosion plasmas to generate pressures in the gigabar (100 TPa) regime. Cone-in-shell targets employed in fast ignition of inertial confinement fusion were irradiated to create a high-pressure source for compression of materials. The imploded plasmas pushed a foil embedded on the tip of a cone. The pressure was estimated from the shock velocity into the material; the shock velocity was obtained from an optical measurement. The measured shock velocity of the foil was above 100 km/s, corresponding to a pressure greater than 1 Gbar.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Inner-shell radiation from wire array implosions on the Zebra generator

Implosions of brass wire arrays on Zebra have produced L-shell radiation as well as inner-shell Kα and Kβ transitions. The L-shell radiation comes from ionization stages around the Ne-like charge state that is largely populated by a thermal electron energy distribution function, while the K-shell photons are a result of high-energy electrons ionizing or exciting an inner-shell (1s) electron from ionization stages around Ne-like. The K- and L-shell radiations were captured using two time-gated and two axially resolved time-integrated spectrometers. The electron beam was measured using a Faraday cup. A multi-zone non-local thermodynamic equilibrium pinch model with radiation transport is used to model the x-ray emission from experiments for the purpose of obtaining plasma conditions. These plasma conditions are used to discuss some properties of the electron beam generated by runaway electrons. A simple model for runaway electrons is examined to produce the Kα radiation, but it is found to be insufficient.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Spectroscopic studies of shell mix in directly driven implosion on SGIII prototype laser facility

We study shell mix during implosion using a capsule with a Cl-doped gas-shell interface that is also filled with Ar-doped deuterium gas. The Ar and Cl K-shell emissions are recorded with a flat crystal spectrometer. The He-β complex is analyzed to infer the electron temperature and density in the hotspot. Two regions of different hydrodynamic states are observed: a region of T{sub e} ∼ 1.2 ± 0.2 keV and n{sub e} ∼ (4 ± 0.5) × 10{sup 23 }cm{sup −3} and another of T{sub e} ∼ 0.6 ± 0.2 keV and n{sub e} ∼ (4 ± 0.5) × 10{sup 22 }cm{sup −3} probed by Ar and Cl ions, respectively. The neutron yield was also recorded and found to have reduced by a factor of ten for the Cl-doped capsule. By attributing the degradation of the neutron yield to the enhanced radiation loss due to the presence of mixed Cl ions and using the conservation of hotspot internal energy, the amount of mixed Cl ions is estimated to be ∼1.4 × 10{sup 14}, corresponding to a 0.1 μm thickness of the initial shell material and a mixing width of about 16 μm.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗