Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “hydrogen component”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

THE SUPERNOVA IMPOSTOR PSN J09132750+7627410 AND ITS PROGENITOR

We report the results of our follow-up campaign of the supernova impostor PSN J09132750+7627410, based on optical data covering ∼250 days. From the beginning, the transient shows prominent narrow Balmer lines with P-Cygni profiles, with a blueshifted absorption component becoming more prominent with time. Along the ∼3 months of the spectroscopic monitoring, broad components are never detected in the hydrogen lines, suggesting that these features are produced in slowly expanding material. The transient reaches an absolute magnitude M {sub r} = −13.60 ± 0.19 mag at maximum, a typical luminosity for supernova impostors. Amateur astronomers provided ∼4 years of archival observations of the host galaxy, NGC 2748. The detection of the quiescent progenitor star in archival images obtained with the Hubble Space Telescope suggests it to be an 18–20 M {sub ⊙} white–yellow supergiant.

79 ASTRONOMY AND ASTROPHYSICS↗

Boron-deoxidized copper withstands brazing temperatures

Boron-deoxidized high-conductivity copper is used for fabrication of heat transfer components that are brazed in a hydrogen atmosphere. This copper has high strength and ductility at elevated temperatures and does not exhibit massive intergranular failure.

Schmidt, E. H.↗

Quantum statistical mechanics of dense partially ionized hydrogen.

The theory of dense hydrogenic plasmas beginning with the two component quantum grand partition function is reviewed. It is shown that ionization equilibrium and molecular dissociation equilibrium can be treated in the same manner with proper consideration of all two-body states. A quantum perturbation expansion is used to give an accurate calculation of the equation of state of the gas for any degree of dissociation and ionization. In this theory, the effective interaction between any two charges is the dynamic screened potential obtained from the plasma dielectric function. We make the static approximation; and we carry out detailed numerical calculations with the bound and scattering states of the Debye potential, using the Beth-Uhlenbeck form of the quantum second virial coefficient. We compare our results with calculations from the Saha equation.

Dewitt, H. E.↗

Quantum statistical mechanics of dense partially ionized hydrogen

The theory of dense hydrogen plasmas beginning with the two component quantum grand partition function is reviewed. It is shown that ionization equilibrium and molecular dissociation equilibrium can be treated in the same manner with proper consideration of all two-body states. A quantum perturbation expansion is used to give an accurate calculation of the equation of state of the gas for any degree of dissociation and ionization. The statistical mechanical calculation of the plasma equation of state is intended for stellar interiors. The general approach is extended to the calculation of the equation of state of the outer layers of large planets.

Dewitt, H. E.↗

Observation of features in the soft X-ray background flux

Two rocket observations of very soft X-ray diffuse intensity show three emission regions of large angular extent. A large portion of the sky as seen with wide angular resolution is mapped. These three regions coincide with broad regions of small column densities of neutral hydrogen. It is suggested that a component of the interstellar medium is very hot and is responsible for the soft X-ray emission and the O VI.

Williamson, F. O.↗

Space colony transportation

The Space Shuttle, Space Tug, and Spacelab are described as the basic transport vehicles for space exploration and operations in the coming decade, and some future space vehicle developments are anticipated. Components of Shuttle (Orbiter, external hydrogen-oxygen propellant tanks, solid boosters), basic maneuvers, and missions are described briefly. Expendable and reusable variants of the Interim Upper Stage (Space Tug) and Spacelab missions are described briefly. A future Large Lift Vehicle recoverable booster and an expendable chemical-nuclear system for the turn of the century are sketched.

Wilson, R.↗

Gamma ray lines from novae

Activities identify the mechanisms responsible for the eruptions characterizing cataclysmic variables are concerned with close binary systems, the properties of which are dominated by the presence of mass transfer from a late-type star onto a white dwarf via an accretion disk. Theories for the outbursts vary in their identification of the eruption mechanism with either gravitational or nuclear energy sources. Existing models for the dwarf novae invoke a dynamical instability in the envelope of the red star which triggers episodic Roche lobe overflow and a concomitant increase in the rate of mass transfer and the outbursts are associated with an increase in the accretion luminosity liberated in the disk. The most successful theoretical models for common nova events involve thermonuclear runaways proceeding in accreted hydrogen envelopes on the white dwarf components of these systems. The characteristics of such runaway events, which can give rise to detectable gamma ray fluxes are discussed. Salient features of existing runaway models are reviewed. Gamma fluxes from Na-22 decay, positron annihilation, and shock induction are predicted.

Truran, J. W.↗

Infrared excesses in early-type stars - Gamma Cassiopeiae

Spectrophotometry of the classical Be star Gamma Cas (1-4 microns, with about 2% spectral resolution) is presented. These data, together with existing broad-band observations, are accurately described by simple isothermal LTE models for the IR excess which differ from most previously published work in three ways: (1) hydrogenic bound-free emission is included; (2) the attenuation of the star by the shell is included; and (3) no assumption is made that the shell contribution is negligible in some bandpass. It is demonstrated that the bulk of the IR excess consists of hydrogenic bound-free and free-free emission from a shell of hot ionized hydrogen gas, although a small thermal component cannot be ruled out. The bound-free emission is strong, and the Balmer, Paschen, and Brackett discontinuities are correctly represented by the shell model with physical parameters as follows: a shell temperature of approximately 18,000 K, an optical depth (at 1 micron) of about 0.5, an electron density of approximately 1 trillion per cu cm, and a size of about 2 trillion cm. Phantom shells (i.e., ones which do not alter the observed spectrum of the underlying star) are discussed.

Scargle, J. D.↗

Energy storage for low earth orbit operations at high power

Results are presented of an in-house study of relative sizes and technology needs of three energy storage systems for high power, low earth orbit power systems. The systems compared are nickel-cadmium batteries, nickel-hydrogen batteries, and regenerative fuel cell systems (RFCS). RFCS based on hydrogen-oxygen and hydrogen-chlorine reactants are examined. Those components of the total power system which are significantly impacted by energy storage system selection; e.g., solar array, reactant storage tanks and radiator sizes, are included incrementally in the weights of the systems compared.

Trout, J. B.↗

Optical Emission Line Studies and the Warm, Ionized Component of the Local Interstellar Medium

Observations of diffuse, galactic H alpha, N2 lambda 6583, and S2 6716 emission lines provide evidence for a warm (10,000K), primarily ionized component of the interstellar medium distribution throughout the galactic disk. This component of the interstellar gas has an electron density approximately equals 0.1-0.2/cu cm and occupies about 10 to 30% of the interstellar volume. Interstellar H alpha emission near the galactic poles, the dispersion measure of a nearby pulsar, and observations of interstellar gas flowing into the solar system indicate that this ionized component is an important constituent of the interstellar medium in the solar neighborhood. The intensity of the H alpha background at high galactic latitudes implies that this component is maintained by an average hydrogen ionization rate in the vicinity of the Sun of (2-4) x 100,000 s(-1) per square cm of galactic disk. The emission measure is 1.3 to 2.3 cm (-6) pc toward the galactic poles. The sources of this ionization were not identified but may include escaping Lyman continuum radiation from planetary nebulae, hot white dwarfs, and early type stars.

Reynolds, R. J.↗

The Mercury atmosphere

Data available on the composition of Mercury's atmosphere are reviewed, and the sources of these atmospheric components are considered. The known gaseous components in Mercury's atmosphere are H, He, O, Na, and K; among other gases likely to be present are H2 and H2O. Probable sources of these components are the solar wind for hydrogen and helium. The alkalis and water are considered to come from the evaporation of meteoroidal material, with a possible contribution to the former by sputtering and photosputtering.

Hunten, D. M.↗

Performance, Stability, and Control Investigation at Mach Numbers from 0.60 to 1.05 of a Model of the "Swallow" with Outer Wing Panels Swept 75 degree with and without Power Simulations

An investigation of the performance, stability, and control characteristics of a variable-sweep arrow-wing model with the outer wing panels swept 75 deg. has been conducted in the Langley 16-foot transonic tunnel. Four outboard engines located above and below the wing provided propulsive thrust, and, by deflecting in the pitch direction and rotating in the lateral plane, also produced control forces. The engine nacelles incorporated swept lateral and vertical fins for aerodynamic stability and control. Jet-off data were obtained with flow-through nacelles, simulating inlet flow; jet thrust and hot-jet interference effects were obtained with faired-nose nacelles housing hydrogen peroxide gas generators. Six-component force and moment data were obtained at Mach numbers from 0.60 to 1.05 through a range of angles of attack and angles of side-slip. Control characteristics were obtained by deflecting the nacelle-fin combinations as elevators, rudders, and ailerons at several fixed angles for each control. The results indicate that the basic wing-body configuration becomes neutrally stable or unstable at a lift coefficient of 0.15; addition of nacelles with fins delayed instability to a lift coefficient of 0.30. Addition of nacelles to the wing-body configuration increased minimum drag from 0.0058 to 0.0100 at a Mach number of 0.60 and from 0.0080 to 0.0190 at a Mach number of 1.05 with corresponding reductions in maximum lift-drag ratio of 12 percent and 33 percent, respectively. The nacelle-fin combinations were ineffective as longitudinal controls but were adequate as directional and lateral controls. The model with nacelles and fins was directionally and laterally stable; the stability generally increased with increasing lift. Jet interference effects on stability and control characteristics were small but the adverse effects on drag were greater than would be expected for isolated nacelles.

Schmeer, James W.↗

Performance, Stability, and Control Investigation at Mach Numbers from 0.4 to 0.9 of a Model of the "Swallow" with Outer Wing Panels Swept 25 degree with and without Power Simulation

An investigation of the performance, stability, and control characteristics of a variable-sweep arrow-wing model (the "Swallow") with the outer wing panels swept 25 deg has been conducted in the Langley 16-foot transonic tunnel. The wing was uncambered and untwisted and had RAE 102 airfoil sections with a thickness-to-chord ratio of 0.14 normal to the leading edge. Four outboard engines located above and below the wing provided propulsive thrust, and, by deflecting in the pitch direction and rotating in the lateral plane, also produced control forces. A pair of swept lateral fins and a single vertical fin were mounted on each engine nacelle to provide aerodynamic stability and control. Jets-off data were obtained with flow-through nacelles, stimulating the effects of inlet flow; jet thrust and hot-jet interference effects were obtained with faired-nose nacelles housing hydrogen peroxide gas generators. Six-component force and moment data were obtained through a Mach number range of 0.40 to 0.90 at angles of attack and angles of sideslip from 0 deg to 15 deg. Longitudinal, directional, and lateral control were obtained by deflecting the nacelle-fin combinations as elevators, rudders, and ailerons at several fixed angles for each control.

Runckel, Jack F.↗

LH2 Tank Composite Coverplate Development and Flight Qualification for the X-33

In this paper, the development history for the first cryogenic pressurized fuel tank coverplates is presented along with a synopsis of the development strategy and technologies which led to success on this program. Coverplates are the large access panels used to access launch vehicle fuel tanks. These structures incorporate all of the requirements for a pressure vessel as well as the added requirement to mount all of the miscellaneous access points required for a fuel management system. The first composite coverplates to meet the requirements for flight qualification were developed on the X-33 program. The X-33 composite coverplates went from an open requirement to successful finished flight hardware with multiple unique configurations, complete with verification testing, in less than eighteen months. Besides the rapid development schedule, these components introduced several new technologies previously unseen in cryogenic composites including solutions to cryogenic shrinkage, self-supporting sealing surfaces, and highly loaded composite bosses with precision sealing interfaces. These components were proven to seal liquid hydrogen at cryogenic temperatures under maximum loading and pressure conditions.

Wright, Richard J.↗

Unitized Regenerative Fuel Cell System Development

Unitized Regenerative Fuel Cells (URFC) have recently been developed by several fuel cell manufacturers. These manufacturers have concentrated their efforts on the development of the cell stack technology itself, and have not up to this point devoted much effort to the design and development of the balance of plant. A fuel cell technology program at the Glenn Research Center (GRC) that has as its goal the definition and feasibility testing of the URFC system balance of plant. Besides testing the feasibility, the program also intends to minimize the system weight, volume, and parasitic power as its goal. The design concept currently being developed uses no pumps to circulate coolant or reactants, and minimizes the ancillary components to only the oxygen and hydrogen gas storage tanks, a water storage tank, a loop heat pipe to control the temperature and two pressure control devices to control the cell stack pressures during operation. The information contained in this paper describes the design and operational concepts employed in this concept. The paper also describes the NASA Glenn research program to develop this concept and test its feasibility.

Burke, Kenneth A.↗

Sulfur resistant nickel based catalysts, methods of forming and using such catalysts

Nickel based catalyst structures are described herein that include a plurality of metal oxides formed as crystalline phases within the catalyst structures. Each metal oxide of a catalyst structure includes nickel and/or aluminum, where one or more metal oxides includes a nickel aluminum oxide, and the one or more nickel aluminum oxides is greater than 50% by weight of the catalyst structure. The catalyst structures further have surface areas of at least 13 m 2 /g. The catalyst structures are resistant to high concentrations of sulfur and are effective in reforming operations for converting methane and other light hydrocarbons to hydrogen and one or more other components. For example, the catalyst structures are effective in coal and biomass gasification systems for the forming and cleanup of synthetic gas.

Goyal, Amit↗

Study of Waste Generated by Retrieval of Fuel Debris at Fukushima Daiichi Nuclear Power Station - 20178

As a member of International Research Institute for Nuclear Decommissioning (IRID), we organized information on waste generated from the fuel debris retrieval, and considered containment, transport and storage processes. An important safety function to consider for these wastes is not only the handling of ordinary high-dose waste, but also the prevention of diffusion of fuel component contamination and the countermeasures against hydrogen gas generation. In order to satisfy these safety functions, we considered guideline for waste generated from the fuel debris retrieval, and proposed an example of handling process that includes generation of waste, container storage, on-site transfer and storage in a storage building. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Multiscale Modeling of the Uptake of Hydrogen Chloride on Anodized Aluminum in Relevance to Spacecraft Fire Safety

Fire safety is a critical component of space missions. An electrical fire within the spacecraft often produces gaseous hydrogen chloride (HCl) from the smoldering of wire insulation. These gases tend to stick to the interior materials of the spacecraft, which is often comprised of treated aluminum. Determining the rate of uptake for HCl by aluminum helps the safe design of the spacecraft to reduce catastrophic mission risk. Our previous studies showed that a one-step global reaction model for adsorption of HCl on aluminum is incapable of predicting the experimentally measured HCl uptake of anodized aluminum, compared to other treatments with thinner oxide layers. X-ray photoelectron spectroscopy revealed that aluminum chloride is found deep in the oxide layer of the anodized aluminum, implying that the transport of HCl within the oxide layer covering the aluminum surface must be considered. This work uses a multiscale modeling approach to predict the uptake of HCl. A pore model is developed wherein the HCl reacts with the aluminum oxide pore walls to create an aluminum chloride layer. The HCl then diffuses through that layer for further reaction, until the diffusion resistance grows too large, and the surface is said to be saturated. The pore model is then coupled with the reactor-scale model to predict overall HCl uptake. Results show that this new multiscale approach predicts the uptake of HCl far more accurately than previously used single-scale models.

Modeling↗