Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “hexagonal boron nitride”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Prospects for sub-nanometer scale imaging of optical phenomena using electron microscopy

Imaging of optical phenomena at the sub-nanometer scale can offer fundamental insights into the electronic or vibrational states in atomic-scale defects, molecules, and nanoparticles, which are important in quantum information, heterogeneous catalysis, optoelectronics, and structural biology. Several techniques have surpassed the traditional Abbe diffraction limit and attained spatial resolutions down to a few nanometers, but sub-nanometer scale optics has remained elusive. Here, we propose an approach that combines spectrally specific photoabsorption with sub-nanometer scale resolution transmission electron microscopy (TEM) of photoexcited electrons. We first estimate the signal level and conditions required for imaging nanoscale optical phenomena in core-shell quantum dots (QDs) like CdS/CdTe. Furthermore, we show the possibility of imaging photoexcited states of atomic-scale defects in a monolayer hexagonal boron nitride (h-BN) using ab initio and high resolution (HR)TEM simulations. The ability to directly visualize photoexcited states at the sub-nanometer scale opens opportunities to study properties of individual quantum dots and atomic defects.

74 ATOMIC AND MOLECULAR PHYSICS↗

Beyond Graphene: Low-Symmetry and Anisotropic 2D Materials

Low-symmetry 2D materials—such as ReS 2 and ReSe 2 monolayers, black phosphorus monolayers, group-IV monochalcogenide monolayers, borophene, among others—have more complex atomistic structures than the honeycomb lattices of graphene, hexagonal boron nitride, and transition metal dichalcogenides. The reduced symmetries of these emerging materials give rise to inhomogeneous electron, optical, valley, and spin responses, as well as entirely new properties such as ferroelasticity, ferroelectricity, magnetism, spin-wave phenomena, large nonlinear optical properties, photogalvanic effects, and superconductivity. Novel electronic topological properties, nonlinear elastic properties, and structural phase transformations can also take place due to low symmetry. Lastly, the “Beyond Graphene: Low-Symmetry and Anisotropic 2D Materials” Special Topic was assembled to highlight recent experimental and theoretical research on these emerging materials.

2D materials↗

Charge collection in h -BN neutron detectors at elevated temperatures

Many of the neutron detector applications are in the environments with harsh conditions such as high temperatures. We report here the measurements of charge collection parameters of hexagonal boron nitride (h-BN) detectors at elevated temperatures, including the electron mobility-lifetime product (μτ) and surface recombination field (s/μ). It was found that μτ is increased, while s/μ is decreased as temperature increases. The temperature dependence of the surface recombination field (s/μ) revealed that electrons trapped in the surface states tend to thermally activate to the bulk region at higher temperatures with an activation energy of about 0.22 eV, leading to a reduction in the density of the charged surface states at elevated temperatures. Consequently, the charge collection efficiency is enhanced at elevated temperatures due to a reduced surface recombination field and increased electron mobility-lifetime product. The results suggested that h-BN neutron detectors are favorable for high temperature operation.

47 OTHER INSTRUMENTATION↗

Methods to accelerate high-throughput screening of atomic qubit candidates in van der Waals materials

The discovery of atom-like spin emitters associated with defects in two-dimensional (2D) wide-bandgap (WBG) semiconductors presents new opportunities for highly tunable and versatile qubits. So far, the study of such spin emitters has focused on defects in hexagonal boron nitride (hBN). However, hBN necessarily contains a high density of nuclear spins, which are expected to create a strong incoherent spin-bath that leads to poor coherence properties of spins hosted in the material. Therefore, identification of new qubit candidates in other 2DWBG materials is necessary. Given the time demands of ab initio methods, new approaches for rapid screening and calculations of identifying properties of suitable atom-like qubits are required. In this work, we present two new methods for rapid estimation of the zero-phonon line (ZPL), a key property of atomic qubits in WBG materials. First, the ZPL is calculated by exploiting Janak’s theorem. For finite changes in occupation, we provide the leading-order estimate of the correction to the ZPL obtained using Janak’s theorem, which is more rapid than the standard method (ΔSCF). Next, we demonstrate an approach to converging excited states that is faster for systems with small strain than the standard approach used in the ΔSCF method. We illustrate these methods using the case of the singly negatively charged calcium vacancy in SiS2, which we are the first to propose as a qubit candidate. This work has the potential to assist in accelerating the high-throughput search for quantum defects in materials, with applications in quantum sensing and quantum computing.

Kuate Defo, Rodrick (ORCID:0000000242788196)↗

Non-conventional bell-shaped diffuse scattering in low-energy electron diffraction from high-quality epitaxial 2D-materials

A broad, bell-shaped intensity component is observed in low-energy electron diffraction from high-quality epitaxial 2D-systems. Three 2D-systems, graphene on Ir(111), graphene on SiC(0001), and hexagonal boron nitride on Ir(111), have been prepared in situ under ultra-high vacuum conditions. In all three systems—independent of substrate material—similar strong diffuse intensity is observed, exhibiting a width as large as 50% of the Brillouin zone and an integrated intensity more than 10 times the intensity of the Bragg spots. The presented experimental results provide evidence for a common origin of such diffuse diffraction intensity in different atomically thin 2D-materials.

Omambac, K. (ORCID:0000000250139567)↗

A hybrid coupler for directing quantum light emission with high radiative Purcell enhancement to a dielectric metasurface lens

Quantum photonic technologies such as quantum sensing, metrology, and simulation could be transformatively enabled by the availability of integrated single photon sources with high radiative rates and photon collection efficiencies. We address these challenges for quantum emitters formed from color center defect sites such as those in hexagonal boron nitride, which are promising candidates as single photon sources due to their bright, stable, polarized, and room temperature emission. We report design of a nanophotonic coupler from color center quantum emitters to a dielectric metasurface lens. The coupler is comprised of a hybrid plasmonic–dielectric resonator that achieves a large radiative Purcell enhancement and partial control of far-field radiation. We report radiative Purcell factors up to 285 and photon collection efficiencies up to 89% for a lossless metasurface, applying a continuous hyperboloidal phase-front. Our hybrid plasmonic–dielectric coupler interfacing two nanophotonic elements is a compound optical element, analogous to those found in microscope objective lenses, which combine multiple optical functions into a single component for improved performance.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Near-field photonic thermal diode based on hBN and InSb films

A thermal diode is a two-terminal device that allows heat to transfer more easily in one direction (forward bias) than in the opposite direction (reverse bias). A photonic thermal diode operates in a contactless mode and may afford a large operating temperature range. Here, a near-field photonic thermal diode based on hexagonal boron nitride (hBN) and indium antimonide (InSb) films is theoretically demonstrated. In this work, the temperature dependence of the interband absorption of InSb is used to couple (or decouple) with the hyperbolic phonon polaritons in hBN. The numerical analysis predicts a rectification ratio greater than 17 for a 10 nm vacuum gap, when operating at an average temperature of 300 K and a temperature difference of 200 K. The calculated rectification ratio exceeds 35 at higher average temperatures with larger temperature differences.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Nanoscale solid-state nuclear quadrupole resonance spectroscopy using depth-optimized nitrogen-vacancy ensembles in diamond

Nuclear magnetic resonance (NMR) and nuclear quadrupole resonance (NQR) spectroscopy of bulk quantum materials have provided insight into phenomena, such as quantum phase criticality, magnetism, and superconductivity. With the emergence of nanoscale 2D materials with magnetic phenomena, inductively detected NMR and NQR spectroscopy are not sensitive enough to detect the smaller number of spins in nanomaterials. The nitrogen-vacancy (NV) center in diamond has shown promise in bringing the analytic power of NMR and NQR spectroscopy to the nanoscale. However, due to depth-dependent formation efficiency of the defect centers, noise from surface spins, band bending effects, and the depth dependence of the nuclear magnetic field, there is ambiguity regarding the ideal NV depth for surface NMR of statistically polarized spins. In this work, we prepared a range of shallow NV ensemble layer depths and determined the ideal NV depth by performing NMR spectroscopy on statistically polarized 19 F in Fomblin oil on the diamond surface. We found that the measurement time needed to achieve a signal-to-noise ratio of 3 using XY8-N noise spectroscopy has a minimum at an NV ensemble depth of 5.5 ± 1.5 nm for ensembles activated from 100 ppm nitrogen concentration. To demonstrate the sensing capabilities of NV ensembles, we perform NQR spectroscopy on the 11 B of hexagonal boron nitride flakes. We compare our best diamond to previous work with a single NV and find that this ensemble provides a shorter measurement time with excitation diameters as small as 4 μm. Furthermore, this analysis provides ideal conditions for further experiments involving NMR/NQR spectroscopy of 2D materials with magnetic properties.

2D materials↗

Resistive switching properties of monolayer h-BN atomristors with different electrodes

Resistive switching properties based on molecular beam epitaxy-grown monolayer hexagonal boron nitride (h-BN) atomristors are studied by using metal insulator metal configurations with different electrode materials. Au/monolayer h-BN/Ni devices demonstrate a forming-free bipolar resistive switching (BRS) behavior, a good endurance with up to 97 cycles at a high compliance current of 100 mA, an average on/off ratio of 10 3 , and a low set/reset voltage variability. Metal/monolayer h-BN/graphite/Co devices exhibit self-compliant current BRS characteristics. Both metal/h-BN/Ni and metal/h-BN/graphite/Co devices show the coexistence of BRS, unipolar resistive switching (URS), and nonvolatile threshold switching (TH) modes. The formation of conductive filaments is attributed to the diffusion and trapping of metal ions on the defect sites driven by the electric field, while the rupture is driven by the electric field in BRS and by Joule heating in URS and TH modes.

74 ATOMIC AND MOLECULAR PHYSICS↗

Interstitial proton transport through defective MXenes

Proton transport across nanometer-thick membranes in an aqueous medium is important for applications in energy and molecular sieving. Recently, Hu et al. [Nature 516(7530), 227–230 (2014)] experimentally demonstrated proton tunneling through 2D materials like graphene and hexagonal boron nitride, opening up a wide range of applications in hydrogen-based technologies such as fuel cells. Here, we demonstrate proton transport in an aqueous medium across a 2D cubic Ti 2 C membrane, a representative defective MXene, from ab initio molecular dynamics simulations. We observe bidirectional translocation of protons, which occurs through the interstitial vacancies in the surface. We show from our simulations that water dissociates on the membrane and the dissociated proton moves into the interstitial sites in the membrane. The proton hops from interstitial-to-interstitial and transports across the membrane. Here, we also show that this interstitial proton transport is associated with an induced electric field that is modulated with bidirectional transport of protons across the membrane.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Thermal conductivity of multilayer polymer-nanocomposite thin films

The development of electrical insulators that are thermally conducting is critical for thermal management applications in many advanced electronics and electrical devices. Here, we synthesized polymer nanocomposite (PNC) films composed of polymers [polyethylenimine, poly(vinylamine), poly(acrylic acid), and poly(ethylene oxide)] and dielectric fillers (montmorillonite clay and hexagonal boron nitride) by layer-by-layer technique. The cross-plane thermal conductivity (k⊥) of the film was measured by the 3ω method. The effect of various factors such as film growth, filler type, filler volume fraction, polymer chemical structures, and temperature on the thermal conductivity is reported. The k⊥ of PNCs with thickness from 37 nm to 1.34 μm was found to be in the range of 0.11 to 0.21 ± 0.02 W m−1 K−1. The k⊥ values were found to be lower than the constituent polymer matrix. The experimental result is compared with existing theoretical models of nanocomposite systems to get insight into heat transfer behavior in such layered films composed of dielectrics and polymers.

Physics↗

Cesium intercalation of graphene: A 2D protective layer on alkali antimonide photocathode

Alkali antimonide photocathodes have wide applications in free-electron lasers and electron cooling. The short lifetime of alkali antimonide photocathodes necessitates frequent replacement of the photocathodes during a beam operation. Furthermore, exposure to mediocre vacuum causes loss of photocathode quantum efficiency due to the chemical reaction with residual gas molecules. Theoretical analyses have shown that covering an alkali antimonide photocathode with a monolayer graphene or hexagonal boron nitride protects it in a coarse vacuum environment due to the inhibition of chemical reactions with residual gas molecules. Alkali antimonide photocathodes require an ultra-high vacuum environment, and depositing a monolayer 2D material on it poses a serious challenge. In the present work, we have incorporated a novel method known as intercalation, in which alkali atoms pass through the defects of a graphene thin film to create a photocathode material underneath. Initially, Sb was deposited on a Si substrate, and a monolayer graphene was transferred on top of the Sb film. Heat cleaning around 550–600 °C effectively removed the Sb oxides, leaving metallic Sb underneath the graphene layer. Depositing Cs on top of a monolayer graphene enabled the intercalation process. Atomic force microscopy, Raman spectroscopy, x-ray photoelectron spectroscopy, low energy electron microscopy, and x-ray diffraction measurements were performed to evaluate photocathode formation underneath the monolayer graphene. Our analysis shows that Cs penetrated the graphene and reacted with Sb and formed Cs 3 Sb.

2D materials↗

Hysteresis-free high mobility graphene encapsulated in tungsten disulfide

High mobility is a crucial requirement for a large variety of electronic device applications. The state of the art for high-quality graphene devices is based on heterostructures made with graphene encapsulated in >40 nm-thick flakes of hexagonal boron nitride (hBN). Unfortunately, scaling up multilayer hBN while precisely controlling the number of layers remains an outstanding challenge, resulting in a rough material unable to enhance the mobility of graphene. This leads to the pursuit of alternative, scalable materials, which can be used as substrates and encapsulants for graphene. Tungsten disulfide (WS2) is a transition metal dichalcogenide, which was grown in large (∼mm-size) multi-layers by chemical vapor deposition. However, the resistance vs gate voltage characteristics when gating graphene through WS2 exhibit largely hysteretic shifts of the charge neutrality point on the order of Δn∼ 3 × 1011 cm−2, hindering the use of WS2 as a reliable encapsulant. The hysteresis originates due to the charge traps from sulfur vacancies present in WS2. In this work, we report the use of WS2 as a substrate and overcome the hysteresis issues by chemically treating WS2 with a super-acid, which passivates these vacancies and strips the surface from contaminants. The hysteresis is significantly reduced by about two orders of magnitude, down to values as low as Δn∼ 2 × 109 cm−2, while the room-temperature mobility of WS2-encapsulated graphene is as high as ∼62 × 103 cm2 V−1 s−1 at a carrier density of n ∼ 1 ×1012 cm−2. Our results promote WS2 as a valid alternative to hBN as an encapsulant for high-performance graphene devices.

Physics↗

Observation of half-integer Shapiro steps in graphene Josephson junctions

We study quantum transport and AC Josephson effect of hexagonal boron nitride encapsulated graphene (BGB) Josephson junctions (JJs). Our experiments reveal the emergence of the half-integer Shapiro steps in the n-type regime with high electron carrier densities. We attribute this observation to the gate-tunable transmission probability of the graphene junction. Furthermore, our numerical simulations are consistent with the appearance of half-integer Shapiro steps at high transparency, which suggests a skewed current phase relationship in the graphene JJ.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Carbon-related donor–acceptor pair transition in the infrared in h-BN

Experimental studies of intentionally doped impurities for the understanding of conductivity control in hexagonal boron nitride (h-BN) ultrawide bandgap (UWBG) semiconductor are limited but are highly desired for emerging applications of h-BN. We report synthesis by hydride vapor phase epitaxy and comparison photoluminescence (PL) emission spectroscopy studies of intentionally carbon (C)-doped and undoped h-BN semi-bulk crystals. In addition to the well-known C-related emission lines observed previously, a C-impurity-related transition near 1.31 eV consisting of multiple phonon replicas has been observed in C-doped h-BN at room temperature. Phonon replicas involved in the 1.31 eV emission have been identified using polarization resolve PL spectroscopy as the transverse acoustic (TA)/longitudinal acoustic (LA) and out-of-plane optical phonon (ZO) modes at the middle point, T, between the Γ- and K-points in the first Brillouin zone. Based on the agreement between the spectral peak position of the observed dominant emission line at 1.31 eV and the calculated energy-level separation between CB donor (carbon replacing boron) and Ci acceptor (carbon interstitial), the observed IR emission line can be decisively assigned to the donor–acceptor pair (DAP) transition involving the CB donor and Ci acceptor assisted by the intervalley (Κ → Μ) scattering processes. The results reinforce the perception that C impurities form deep-level centers and provided an improved understanding of C impurities in h-BN.

Physics↗

Hofstadter butterfly and quantum transport benchmarks in PVA-exfoliated graphene heterostructures

Polymer exposure during van der Waals heterostructure fabrication is widely regarded as compromising the integrity of the electronic system required for hosting emergent quantum physics. This assumption has persisted largely because electronic benchmarking of heterostructures from polymer-exposed graphene has remained limited to only foundational transport metrics, such as mobility and charge inhomogeneity. Here, we challenge this assumption by establishing that graphene heterostructures produced by polyvinyl alcohol (PVA)-assisted exfoliation and encapsulated in hexagonal boron nitride using elevated-temperature lamination satisfy demanding quantum transport benchmarks. Beyond exhibiting ultra-high mobility and ballistic transport, these heterostructures yield quantum scattering times comparable to the best polymer-free devices. Most demanding of all, moiré superlattices from PVA-exposed graphene exhibit Hofstadter butterfly spectra, confirming spatially uniform interlayer coupling across the device area. These results establish that PVA exposure is compatible with low-disorder electronic systems, relaxing the trade-off between scalable fabrication and low-disorder quantum transport. This study motivates further development of polymer-assisted assembly with engineered residue-removal protocols.

36 MATERIALS SCIENCE↗

Making two-photon processes dominate one-photon processes using mid-IR phonon polaritons

Phonon polaritons are guided hybrid modes of photons and optical phonons that can propagate on the surface of a polar dielectric. In this work, we show that the precise combination of confinement and bandwidth offered by phonon polaritons allows for the ability to create highly efficient sources of polariton pairs in the mid-IR/terahertz frequency ranges. Specifically, these polar dielectrics can cause emitters to preferentially decay by the emission of pairs of phonon polaritons, instead of the previously dominant single-photon emission. We show that such two-photon emission processes can occur on nanosecond time scales and can be nearly 2 orders of magnitude faster than competing single-photon transitions, as opposed to being as much as 8–10 orders of magnitude slower in free space. These results are robust to the choice of polar dielectric, allowing potentially versatile implementation in a host of materials such as hexagonal boron nitride, silicon carbide, and others. Our results suggest a design strategy for quantum light sources in the mid-IR/terahertz: ones that prefer to emit a relatively broad spectrum of photon pairs, potentially allowing for new sources of both single and multiple photons.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Torsional force microscopy of van der Waals moirés and atomic lattices

In a stack of atomically thin van der Waals layers, introducing interlayer twist creates a moiré superlattice whose period is a function of twist angle. Changes in that twist angle of even hundredths of a degree can dramatically transform the system’s electronic properties. Setting a precise and uniform twist angle for a stack remains difficult; hence, determining that twist angle and mapping its spatial variation is very important. Techniques have emerged to do this by imaging the moiré, but most of these require sophisticated infrastructure, time-consuming sample preparation beyond stack synthesis, or both. In this work, we show that torsional force microscopy (TFM), a scanning probe technique sensitive to dynamic friction, can reveal surface and shallow subsurface structure of van der Waals stacks on multiple length scales: the moirés formed between bi-layers of graphene and between graphene and hexagonal boron nitride (hBN) and also the atomic crystal lattices of graphene and hBN. In TFM, torsional motion of an Atomic Force Microscope (AFM) cantilever is monitored as it is actively driven at a torsional resonance while a feedback loop maintains contact at a set force with the sample surface. TFM works at room temperature in air, with no need for an electrical bias between the tip and the sample, making it applicable to a wide array of samples. It should enable determination of precise structural information including twist angles and strain in moiré superlattices and crystallographic orientation of van der Waals flakes to support predictable moiré heterostructure fabrication.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗