Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ground data system”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Telemetry data storage systems technology for the Space Station Freedom era

This paper examines the requirements and functions of the telemetry-data recording and storage systems, and the data-storage-system technology projected for the Space Station, with particular attention given to the Space Optical Disk Recorder, an on-board storage subsystem based on 160 gigabit erasable optical disk units each capable of operating at 300 M bits per second. Consideration is also given to storage systems for ground transport recording, which include systems for data capture, buffering, processing, and delivery on the ground. These can be categorized as the first in-first out storage, the fast random-access storage, and the slow access with staging. Based on projected mission manifests and data rates, the worst case requirements were developed for these three storage architecture functions. The results of the analysis are presented.

Dalton, John T.↗

Evaluation of an ERTS-1 data collection platform installed in the Alpine Tundra, Colorado

The communication of data in real-time to users from ground stations in remote areas is a major objective of recent space technology. The data collection system considered uses small battery-operated ground-based transmitters called data collection platforms (DCP). The feasibility of collecting environmental data in extreme cold and windy environments using the ERTS DCP, has been investigated. A summary of the results of an evaluation of the system used is presented.

Barry, R. G.↗

Investigation and evaluation of shuttle/GPS navigation system

Iterative procedures were used to analyze the performance of two preliminary shuttle/GPS navigation system configurations: an early OFT experimental system and a more sophisticated system which consolidates several separate navigation functions thus permitting net cost savings from decreased shuttle avionics weight and power consumption, and from reduced ground data processing. The GPS system can provide on-orbit navigation accuracy an order of magnitude better than the baseline system, with very adequate link margins. The worst-case link margin is 4.3 dB. This link margin accounts for shuttle RF circuit losses which were minimized under the constraints of program schedule and environmental limitations. Implicit in the link analyses are the location trade-offs for preamplifiers and antennas.

Nilsen, P. W.↗

Investigation to develop a multistage forest sampling inventory system using ERTS-1 imagery

The author has identified the following significant results. The annotation system produced a RMSE of about 200 m ground distance in the MSS data system with the control data used. All the analytical MSS interpretation models tried were highly significant. However, the gains in forest sampling efficiency that can be achieved by using the models vary from zero to over 50 percent depending on the area to which they are applied and the sampling method used. Among the sampling methods tried, regression sampling yielded substantial and the most consistent gains. The single most significant variable in the interpretation model was the difference between bands 5 and 7. The contrast variable, computed by the Hadamard transform was significant but did not contribute much to the interpretation model. Forest areas containing very large timber volumes because of large tree sizes were not separable from areas of similar crown cover but containing smaller trees using ERTS image interpretation only. All correlations between space derived timber volume predictions and estimates obtained from aerial and ground sampling were relatively low but significant and stable. There was a much stronger relationship between variables derived from MSS and U2 data than between U2 and ground data.

Langley, P. G.↗

Evolution and Mean Properties of Convective Systems in Southwestern Amazonia During TRMM-LBA

During the wet season TRMM field campaign in Rondonia, Brazil, a variety of convective systems were sampled by radar, sounding, and geostationary satellite for a 60 day period in early 1999. Local variations in the local wind and humidity field have been attributed in part by this study to synoptic scale phenomena, most conspicuously the establishment of stationary frontal systems penetrating into the tropics. These baroclinic systems induced periodic episodes low level moist, westerly flow across Rondonia during the experiment. This flow feature may be an important component of the South American climate system by playing a role in maintaining the South Atlantic Convergence Zone, which was active during these local westerly wind events. It is therefore important to understand the differences in mesoscale properties of convective systems between the westerly wind periods and intervening easterly wind periods. Differences in shear and moisture characteristics (Halverson et al. 2000, this meeting) are compared to structural and life-cycle characteristics of convective systems in Rondonia. Data from ground based radar and geostationary satellite provide a view of the evolution of the vertical structure and horizontal morphology of several large mesoscale convective systems in each regime. Preliminary statistics on the diurnal variation of precipitation intensity, areal coverage, and cloud top area are presented. Results suggest that long-lived, shallow convective systems with a large stratiform component of precipitation are characteristic of the westerly wind periods. A goal of this study is to establish a basis for which to parameterize the mesoscale effects of convection on large scale features of the South American climate system.

Rickenbach, Thomas M.↗

Ohio River main stem study - The role of geographic information systems and remote sensing in flood damage assessments

The Pittsburgh District, Corps of Engineers, has conducted feasibility analyses of various procedures for performing flood damage assessments along the main stem of the Ohio River. Procedures using traditional, although highly automated, techniques and those based on geographic information systems have been evaluated at a test site, the City of New Martinsville, Wetzel County, WV. The flood damage assessments of the test site developed from an automated, conventional structure-by-structure appraisal served as the ground truth data set. A geographic information system was developed for the test site which includes data on hydraulic reach, ground and reference flood elevations, and land use/cover. Damage assessments were made using land use mapping developed from an exhaustive field inspection of each tax parcel. This ground truth condition was considered to provide the best comparison of flood damages to the conventional approach. Also, four land use/cover data sets were developed from Thematic Mapper Simulator (TMS) and Landsat-4 Thematic Mapper (TM) data. One of these was also used to develop a damage assessment of the test site. This paper presents the comparative absolute and relative accuracies of land use/cover mapping and flood damage assessments, and the recommended role of geographic information systems aided by remote sensing for conducting flood damage assessments and updates along the main stem of the Ohio River.

Edwardo, H. A.↗

LANDSAT D data processing facility study

Mission planning of the LANDSAT D is discussed which will present several major advances in the spacecraft, sensor (Thematic Mapper), ground systems and overall system design. The system provides for two data links-direct satellite to ground, and via the Tracking and Data Relay Satellite.

Source record↗

Payload/GSE/data system interface: Users guide for the VPF (Vertical Processing Facility)

Payload/GSE/data system interface users guide for the Vertical Processing Facility is presented. The purpose of the document is three fold. First, the simulated Payload and Ground Support Equipment (GSE) Data System Interface, which is also known as the payload T-0 (T-Zero) System is described. This simulated system is located with the Cargo Integration Test Equipment (CITE) in the Vertical Processing Facility (VPF) that is located in the KSC Industrial Area. The actual Payload T-0 System consists of the Orbiter, Mobile Launch Platforms (MLPs), and Launch Complex (LC) 39A and B. This is referred to as the Pad Payload T-0 System (Refer to KSC-DL-116 for Pad Payload T-0 System description). Secondly, information is provided to the payload customer of differences between this simulated system and the actual system. Thirdly, a reference guide of the VPF Payload T-0 System for both KSC and payload customer personnel is provided.

Source record↗

Shuttle Ku-band bent-pipe implementation considerations

This paper describes an approach for relay of data-modulated subcarriers from Shuttle payloads through the Shuttle Ku-band communications subsystem (and subsequently through a tracking and data relay satellite system to a ground terminal). The novelty is that a channel originally provided for baseband digital data is shown to be suitable for this purpose; the resulting transmission scheme is referred to as a narrowband bent-pipe scheme. Test results demonstrating the validity of the narrowband bent-pipe mode are presented, and limitations on system performance are described.

Batson, B. H.↗

SPARCLE: Validation of Observing System Simulations (SPace Readiness Coherent Lidar Experiment)

NASA recently approved a mission to fly a Doppler Wind Lidar (DWL) on a U.S. Space Shuttle. SPARCLE, managed by Marshall Space Flight Center in Huntsville, AL, is targeted for launch in March 2001. This mission is viewed as a necessary demonstration of a solid state (2 micron) lidar using coherent detection before committing resources to a 3-5 year research or operational mission. While, to many, this shuttle mission is seen as the first step in a series leading to a fully operational wind observing system, to others, it is a chance to validate predictions of performance based upon theoretical models, analyses of airborne and ground-based data, and sophisticated observing system simulation experiments. This paper will be presented in two parts: first a brief overview of the SPARCLE mission and second, a summary of current performance predictions and key contributions from ground- based and airborne DWL research. The SPARCLE instrument is a 100 mJ, 6 Hz, diode-pumped 2-micron laser with a .25 m telescope using heterodyne mixing in a fiber and an InGaAs detector. A 25 cm silicon wedge scanner will be used in step-stare modes with dwells ranging from 60 seconds to .5 seconds. Pointing knowledge is achieved with a dedicated GPS/INS mounted close to the lidar. NASA's Hitchhiker program is providing the instrument enclosures (2 cans) and mission logistics support. An on-board data system is sized to record 150 Gbytes of raw signal from a two 400 MHZ A/D converters. On-board signal processing will be used to control the frequency of the Local Oscillator. SPARCLE is predicted to have a single shot backscatter sensitivity near 1x10(exp -6) m-1 sr-1, To achieve higher sensitivity, shot accumulation will be employed. Ground-based, 2 micron DWLs have been used to assess the benefits of shot accumulation (approximately SQRT for SNR). Airborne programs like MACAWS have provided good datasets for evaluating various sampling strategies and signal processing algorithms. Using these real data to calibrate our simulation models, we can describe when and how well SPARCLE is expected to preform. Outputs from these performance models will be presented.

Emmitt, G. D.↗

Thematic Mapper Image Production in the Engineering Checkout Phase

Thematic Mapper data processing during LANDSAT 4's first year was performed on an engineering evaluation basis. Fully corrected products were created for some 282 scenes during this period using software and systems based upon the intended full production systems to become operational following the evaluation period. The engineering systems included substantial software and procedures for assessing spacecraft, instrument and ground processing algorithmic behavior. The data systems are described in terms of performance objectives, processing organization and data flow, quality assurance measurements and achievement of goals. The a priori implementation of TM radiometric and geometric corrections is described. Changes to processing suggested by or implemented on the basis of on-orbit data analysis are discussed. Spacecraft, instrument and algorithmic performance are evaluated.

Fischel, D.↗

Autonomous Navigation with Ground-to-Space Doppler Measurements Referenced to a Temperature-Compensated Crystal Oscillator

The National Aeronautics and Space Administration (NASA) Goddard Space Flight Center (GSFC) has spent several years developing operational Onboard Navigation Systems (ONS's) to provide real-time autonomous, high-accuracy navigation products for spacecraft using NASA's space and ground communication systems. The highly successful Tracking and Data Relay Satellite System (TDRSS) ONS (TONS) experiment on the Explorer Platform/Extreme Ultraviolet Explorer (EP/EUVE) spacecraft, launched June 7, 1992, flight-demonstrated the ONS for high-accuracy navigation using TDRSS forward- link communications services, In late 1994, the ground station ONS (GONS) experiment, using the same EP/EUVE flight hardware, flight-demonstrated the feasibility of high-accuracy autonomous navigation using ground station forward-link communication services, with an ultrastable oscillator (USO) as the frequency reference (1 part in 10(exp 10) over 24 hours). This paper provides a follow-on analysis of GONS performance to assess the navigation accuracy achievable if GONS uses the significantly less stable (5 parts in 10(exp 8) over 24 hours, compared with a specification of 1 part in 10(exp 6)) Temperature-Compensated Crystal Oscillator (TCXO), which is integral to the transponder, as a frequency reference rather than an external USO. The GONS TCXO experiment results from a 20-day period are used to project the expected performance of an operational system. The GONS processes Doppler data derived from nominally scheduled ground station forward-link communication services using a sequential estimation algorithm enhanced by a sophisticated process noise model to provide onboard orbit and frequency determination. To evaluate the navigation accuracies achievable if a TCXO were used, actual experiment data (which used the USO as the frequency reference) were corrupted with errors from real TDRSS one-way return tracking measurements taken from EP/EUVE's TCXO. Analysis of the GONS TCXO experiment performance indicates that real-time onboard position accuracies of better than 300 meters (1 sigma) are achievable with as few as two tracking contacts per day for the EP/EUVE 525-kilometer altitude, 28.5-degree inclination orbit, provided the TCXO is as stable as that in EP/EUVE's TDRSS transponder. GONS using a TCXO frequency reference provides a viable option for many upcoming spacecraft missions with moderate position accuracy requirements and an interest in reducing their operational costs with autonomous navigation.

Radomski, M. S.↗

Status of frequency and time support for NASA systems

NASA has frequency and timing systems at many facilities and centers. Timing systems with specifications tighter than several microseconds are covered. These ground based systems support scientific experiments and spacecraft tracking for the following programs; NASA Satellite Laser Ranging (NSLR); Network Mission Operations Support (NMOS); Kennedy Space Center (KSC); Very Long Baseline Interferometry (VLBI); Tracking Data Relay Satellite System (TDRSS) Ground Terminal Network; and the Deep Space Network (DSN). Major equipment assemblies, specifications, performance, and requirements, both present and future, are presented.

Kuhnle, Paul F.↗

Natural Systems Data Package for the Active Trenches of the Low-Level Burial Grounds, Hanford Site, Washington

This document summarizes the available information regarding the natural system (vadose zone and saturated zone) at the active trenches of the 200 West Area and 200 East Area Low-Level Burial Grounds (LLBGs). This information is relevant for developing the natural system fate and transport model for the update of the active trenches performance assessment. This document presents a description of the major features, events, and processes of the natural system at the active trenches of the 200 West Area and 200 East Area LLBGs that involves the geologic features or framework, and the vadose zone and groundwater flow and transport system. The description of the geologic features includes the following items: geologic setting, major structural features, major hydrostratigraphic units, and geologic framework. The discussion concerning vadose zone flow and transport at the active trenches of the 200 West Area and 200 East Area LLBGs includes the following topics: vadose zone features, events, and processes relevant to the development of the vadose zone conceptual model; hydrogeologic units and conditions; factors affecting moisture movement; and flow and transport properties of major units. The discussion concerning the groundwater flow and transport system in the vicinity of the active trenches of the 200 West Area and 200 East Area LLBGs includes the following topics: saturated zone features, events, and processes relevant to the saturated zone conceptual model; hydrogeologic units; groundwater flow conditions; and flow and transport properties.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗