SEARCH · Engineering Papers

Results for “functional modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

All sources NASA NTRS DOE OSTI

NASA NTRSDate not supplied

Comparisons of CFD Simulations of Icing Wind Tunnel Clouds with Experiments Conducted at the NASA Propulsions Systems Laboratory

This paper evaluates simulation predictions against experimental test data of icing clouds that were produced during 2018 ice crystal icing physics tests conducted at the NASA Propulsion Systems Laboratory icing wind tunnel. Aero-thermal and cloud parameters are set and known upstream at the tunnel inlet and spray system, but change as the cloud and air thermodynamically interact as the flowing masses reach the tunnel test section. Utilizing the ANSYS Fluent Discrete Phase Model function, 3D computational fluid dynamics (CFD) simulations were performed, capturing the thermodynamic interactions between the test parameters, and providing predictions of the aero thermal and cloud conditions at the tunnel test section. Simulation predictions were compared with test data that were measured at the tunnel exit plane. Evaluations focused on the cloud concentration (total water content), humidity content, and air temperature. CFD simulation predictions showed areas of agreement and disagreement. Simulations showed that cloud concentration profiles at the test section are strongly related to the initial spray nozzle pattern used at the tunnel inlet. Experimental data suggest that greater dispersion of the cloud occurred as the simulated cloud predicted areas of high and low cloud concentration compared to test data profiles. Simulations, however, captured the magnitude and location of the change in humidity content and the change in air temperature due to the presence of the cloud reasonably well, when compared to test data. This result would suggest that while the ANSYS simulation did not fully predict the spreading of the cloud as measured during experiment, it did capture evaporation and the molecular movements of air and vapor relatively well.

CFD↗

NASA NTRSDate not supplied

Comparisons of CFD Simulations of Icing Wind Tunnel Clouds with Experiments Conducted at the NASA Propulsions Systems Laboratory

CFD↗

NASA NTRS2020

Evaluation and Validation of a High Spatial Resolution Satellite Soil Moisture Product over the Continental United States

The soil moisture (SM) data retrieved from the Soil Moisture Active and Passive (SMAP) satellite are available at a 9 km grid spacing since April 2015. This product can provide valuable information for research and applications in hydrology and other related fields. However, the resolution may be too coarse for applications at catchment or field scale. In this study, an established downscaling methodology, which had a major modification regarding its application on the SMAP 33 km domain, was implemented to develop a 1 km soil moisture product based on the SMAP 9 km data. The algorithm proposed here is based on the thermal inertia principle and developed by modeling the relationship between surface temperature difference and SM for different Normalized Difference Vegetation Index (NDVI) classes. The model functions were established and tuned using data from the NASA’s Land Information System (LIS) North America Land Data Assimilation System (NLDAS) and remotely sensed VISible/InfRared (VIS/IR) reflectance data from Long Term Data Record (LTDR) AVHRR (Advanced Very High Resolution Radiometer) for the growing season months of April-September 1981–2018. These were then implemented using the MODIS (Moderate Resolution Imaging Spectroradiometer) data over the Continental United States (CONUS) domain. Validation activities were carried out using in situ measurements distributed through the International Soil Moisture Network (ISMN). The validation results computed using the 1 km SM data showed that the R2, unbiased RMSE (root mean square error) and bias were improved relative to the 9 km SMAP product by 0.045, 0.018m3/m3 and 0.001m3/m3, respectively. The 1 km SM also exhibited a strong time-series autocorrelation. Further accuracy assessment analyses indicated that precipitation might contribute to the uncertainties in both the 9 km SMAP and 1 km downscaled SMAP SM products.

SMAP↗

NASA NTRS1994

Galileo System Design for Orbital Operations

In April 1991, Galileo's X-band high gain antenna failed to deploy. An alternate approach which utilizes the spacecraft's S-band low gain antenna was conceived and is in development. This approach will enable the accomplishment of at least 70 percent of Galileo's original scientific objectives. The short development period dictates that the spacecraft system design, the ground data system design, and the operational system scenarios and procedures necessary to conduct the mission be developed concurrently, and places a premium on validating the system designs as early as possible. This paper presents an overview of the Galileo Mission, briefly describes the changes required to implement the orbital phase of the Galileo Mission, and describes the functional model of the end to end system which was developed to support the systems design effort.

Galileo↗

NASA NTRS1993

Satellite Altimeter Measurements of Surface Wind

In the present work, geophysical model functions (GMFs) for altimeter wind speed measurements are described. These GMFs account for an effect of the actual degree of sea development on the radar cross section by utilizing information on the significant wave height. The wind speed measurement accuracy achieved (the overall bias 0.1 m/s and the rms error about 1.6 m/s) is higher that the accuracy of commonly employed GMFs while the wave-age-related trend is reduced to a geophysically insignificant level.

Greysukh, Alexander↗

NASA NTRS2017

Application of time-variable process noise in terrestrial reference frames determined from VLBI data

In recent years, Kalman ﬁltering has emerged as a suitable technique to determine terrestrial reference frames (TRFs), a prime example being JTRF2014. The time series approach allows variations of station coordinates that are neither reduced by observational corrections nor considered in the functional model to be taken into account. These variations are primarily due to non-tidal geophysical loading eﬀects that are not reduced according to the current IERS Conventions (2010). It is standard practice that the process noise models applied in Kalman ﬁlter TRF solutions are derived from time series of loading displacements and account for station dependent diﬀerences. So far, it has been assumed that the parameters of these process noise models are constant over time. However, due to the presence of seasonal and irregular variations, this assumption does not truly reﬂect reality. In this study, we derive a station coordinate process noise model allowing for such temporal variations. This process noise model and one that is a parameterized version of the former are applied in the computation of TRF solutions based on very long baseline interferometry data. In comparison with a solution based on a constant process noise model, we ﬁnd that the station coordinates are aﬀected at the millimeter level.

Schuh, Harald↗

NASA NTRSDate not supplied

Velocity and Temperature Measurements in High-speed Flows with Naturally Present Dust Particles Using Rayleigh and Mie Scattering

Dust particles and occasional moisture condensations are unavoidable reality of all wind tunnels. On the path to pursue a goal of velocity and temperature measurements in large transonic and supersonic wind tunnels we have created a tabletop, spectrally resolved, Rayleigh-Mie scattering setup around a small jet fed by ambient and lightly seeded air to determine the viability and accuracy of the technique. The other reality of a wind tunnel setup is the background scattering or the glare at laser frequency, which contaminates the Rayleigh-Mie scattered light. This is simulated by backgrounds with different reflectivity towards the collection optics. Light from a CW laser is delivered via an optical fiber and the scattered light is spectrally resolved using a stabilized Fabry-Perot interferometer, followed by imaging on an EMCCD camera. A model of the of the combined background glare, Mie scattering, and the Rayleigh spectrum was fitted to the camera image using maximum likelihood estimation. Since the background glare occurs at the known frequency of the incident light and the Mie scattering peak corresponds to the Doppler shift from the bulk velocity, both were easily identified, and provided a measure of flow velocity. Preliminary results show that the Rayleigh spectrum can also be resolved, which provides a measure of temperature. It is observed that a slight drift of the laser frequency during data collection affected fitting of the model function leading to larger error. A feedback loop-based stabilization system is on development to take advantage of slight tunability of the laser via a piezo-control. Preliminary results are presented in the abstract. More extensive data from a systematic survey will be presented in the final paper.

Rayleigh scattering↗

DOE OSTI2022

High-fidelity model-driven deception platform for cyber-physical systems

A system is described for protecting a cyber-physical system against a potential attacker of the cyber-physical system. The system includes at least one processor configured to: collect historical information about the cyber-physical system, and train, based on the historical information, a machine-learned model to predict future conditions of at least a portion of the cyber-physical system. Responsive to detecting an input signal to the cyber-physical system, the system is configured to output an alert to the cyber-physical system indicative of a potential attacker, and respond to the input signal by simulating, based on the future conditions predicted by the machine-learned model, functionality and communications of the at least a portion of the cyber-physical system.

Edgar, Thomas W.↗

DOE OSTI2024

A Generic and Multi-Functional Electromagnetic Transient Model for Grid-Following Inverter: Preprint

This article presents a generic and multi-functional electromagnetic transient (EMT) dynamic model of grid following (GFL) inverter-based resource (IBR) using the PSCAD TM software platform. The features of the developed model includes the flexibility in selecting various types and combinations of DC sources covering PV modules, battery modules, ideal DC source module, as well as flexibility in selecting either switched or averaged model of inverter. This model also covers exhaustive lists of controller logic covering open-loop/closed-loop PQ dispatch control, DC voltage and AC terminal voltage control along with the conventional current control designed in dq-domain, aB- domain and positive-negative sequence domain. Moreover, this model is equipped with the flexibility in selecting various types of current limiting schemes that includes saturation-based as well as latching-based current limiter, anti-windup protection. Moreover, the EMT model is agnostic to the MVA rating and is suitable for interfacing transmission systems by being complaint with the IEEE Std. 2800. The generality in the power circuits and the multi-functional options in operation and control of the developed EMT model makes it suitable for both academia and industry to study various power system aspects not limited to but such as fault behavior of GFL IBR and impacts on protection system, transient stability of a system interfaced with large number of GFL IBRs etc.

grid following inverter↗

NASA NTRS2000

Using Modern Design Tools for Digital Avionics Development

Using Modem Design Tools for Digital Avionics Development Shrinking development time and increased complexity of new avionics forces the designer to use modem tools and methods during hardware development. Engineers at the Marshall Space Flight Center have successfully upgraded their design flow and used it to develop a Mongoose V based radiation tolerant processor board for the International Space Station's Water Recovery System. The design flow, based on hardware description languages, simulation, synthesis, hardware models, and full functional software model libraries, allowed designers to fully simulate the processor board from reset, through initialization before any boards were built. The fidelity of a digital simulation is limited to the accuracy of the models used and how realistically the designer drives the circuit's inputs during simulation. By using the actual silicon during simulation, device modeling errors are reduced. Numerous design flaws were discovered early in the design phase when they could be easily fixed. The use of hardware models and actual MIPS software loaded into full functional memory models also provided checkout of the software development environment. This paper will describe the design flow used to develop the processor board and give examples of errors that were found using the tools. An overview of the processor board firmware will also be covered.

Hyde, David W.↗

DOE OSTI2020

Exchange-correlation functional challenges in modeling quaternary chalcogenides

The development of next-generation quaternary chalcogenides, such as Cu2ZnSnS4 (CZTS) and Cu2ZnGeS4 (CZGS), for solar energy and thermoelectric applications hinges upon both careful experimentation and accurate quantum mechanical modeling. To address the latter, many have turned to density functional theory (DFT), which offers several choices for the approximate treatment of electron exchange and correlation (XC). Popular XC functionals include the Perdew-Burke-Ernzerhof (PBE) generalized gradient approximation (GGA) and the recently developed strongly constrained and appropriately normed (SCAN) meta-GGA. Extensions of DFT functionals, such as adding a Hubbard U correction and introducing a fraction of the Fock exchange (hybrid functionals), have been used widely to model systems containing 3d metal ions. However, no studies yet have compared comprehensively PBE(+U) and SCAN(+U) in the quality of their predictions of the bulk and defect thermodynamics of quaternary chalcogenides, which play a critical role in device fabrication and performance. Hence, here we calculate the (i) 0 K formation energies of bulk Ge compounds and (ii) neutral defect formation energies including charge-balanced (e.g., CuZn + ZnCu) and charge-imbalanced (e.g., CuSn) combinations of antisites and vacancies in CZTS and CZGS using the PBE, PBE +U, SCAN, SCAN +U, and the hybrid Heyd-Scuseria-Ernzerhof XC frameworks. We find that the formation energies of charge-imbalanced defects are more sensitive to the choice of the XC functional than those of charge-balanced defects, which can be explained by the differences in the extent of penalization of defect-generated delocalized electrons/holes by PBE, PBE +U, SCAN, and SCAN +U. Additionally, our results show that SCAN systematically underbinds Ge-containing compounds, thus highlighting the need for even further improvement of XC functionals. Based on our findings, we recommend the use of SCAN for modeling quaternary chalcogenides because its errors are systematic, and it has the firmest theoretical underpinning. Our work provides guidance for future modeling of quaternary chalcogenides.

14 SOLAR ENERGY↗

DOE OSTI2023

Status of genome function annotation in model organisms and crops

Abstract Since the entry into genome‐enabled biology several decades ago, much progress has been made in determining, describing, and disseminating the functions of genes and their products. Yet, this information is still difficult to access for many scientists and for most genomes. To provide easy access and a graphical summary of the status of genome function annotation for model organisms and bioenergy and food crop species, we created a web application ( https://genomeannotation.rheelab.org ) to visualize, search, and download genome annotation data for 28 species. The summary graphics and data tables will be updated semi‐annually, and snapshots will be archived to provide a historical record of the progress of genome function annotation efforts. Clear and simple visualization of up‐to‐date genome function annotation status, including the extent of what is unknown, will help address the grand challenge of elucidating the functions of all genes in organisms.

59 BASIC BIOLOGICAL SCIENCES↗

NASA NTRS1979

Extension of the coherence function to quadratic models

It is shown how the use of higher coherence functions can recover some of the lost coherence due to nonlinear relationship between two fluctuating quantities whose degree of mutual coherence is being measured. The relationship between the two processes is modeled with the aid of a linear term and a quadratic term. As a specific example, the relationship between plasma density and potential fluctuations in a plasma is considered. The fraction of power in the auto-power spectrum of the potential fluctuations due to a linear relationship and to a quadratic relationship between the density and potential fluctuations is estimated.

Kim, Y. C.↗

DOE OSTI2022

Structure-mining: screening structure models by automated fitting to the atomic pair distribution function over large numbers of models

Explore the source record for details and available documents.

99 GENERAL AND MISCELLANEOUS↗

NASA NTRS2015

Integrated Medical Model (IMM) 4.0 Enhanced Functionalities

The Integrated Medical Model is a probabilistic simulation model that uses input data on 100 medical conditions to simulate expected medical events, the resources required to treat, and the resulting impact to the mission for specific crew and mission characteristics. The newest development version of IMM, IMM v4.0, adds capabilities that remove some of the conservative assumptions that underlie the current operational version, IMM v3. While IMM v3 provides the framework to simulate whether a medical event occurred, IMMv4 also simulates when the event occurred during a mission timeline. This allows for more accurate estimation of mission time lost and resource utilization. In addition to the mission timeline, IMMv4.0 features two enhancements that address IMM v3 assumptions regarding medical event treatment. Medical events in IMMv3 are assigned the untreated outcome if any resource required to treat the event was unavailable. IMMv4 allows for partially treated outcomes that are proportional to the amount of required resources available, thus removing the dichotomous treatment assumption. An additional capability IMMv4 is to use an alternative medical resource when the primary resource assigned to the condition is depleted, more accurately reflecting the real-world system. The additional capabilities defining IMM v4.0the mission timeline, partial treatment, and alternate drug result in more realistic predicted mission outcomes. The primary model outcomes of IMM v4.0 for the ISS6 mission, including mission time lost, probability of evacuation, and probability of loss of crew life, are be compared to those produced by the current operational version of IMM to showcase enhanced prediction capabilities.

Spae Adaptation Syndrome↗

DOE OSTI2020

Gauges, loops, and polynomials for partition functions of graphical models

Graphical models represent multivariate and generally not normalized probability distributions. Computing the normalization factor, called the partition function, is the main inference challenge relevant to multiple statistical and optimization applications. The problem is #P-hard that is of an exponential complexity with respect to the number of variables. Here, aimed at approximating the partition function, we consider multi-graph models where binary variables and multivariable factors are associated with edges and nodes, respectively, of an undirected multi-graph. We suggest a new methodology for analysis and computations that combines the Gauge function technique from Chertkov and Chernyak with the technique developed in Anari and Oveis Gharan 2017 arXiv:1702.02937; Gurvits 2011 arXiv:1106.2844; Straszak and Vishnoi 2017 55th Annual Allerton Conf. on Communication, Control, and Computing, based on the recent progress in the field of real stable polynomials. We show that the Gauge function, representing a single-out term in a finite sum expression for the partition function which achieves extremum at the so-called belief-propagation gauge, has a natural polynomial representation in terms of gauges/variables associated with edges of the multi-graph. Moreover, Gauge function can be used to recover the partition function through a sequence of transformations allowing appealing algebraic and graphical interpretations. Algebraically, one step in the sequence consists of the application of a differential operator over gauges associated with an edge. Graphically, the sequence is interpreted as a repetitive elimination/contraction of edges resulting in multi-graph models on decreasing in size (number of edges) graphs with the same partition function as in the original multi-graph model. Even though the complexity of computing factors in the sequence of the derived multi-graph models and respective Gauge functions grow exponentially with the number of eliminated edges, polynomials associated with the new factors remain bi-stable if the original factors have this property. Moreover, we show that BP estimations in the sequence do not decrease, each low-bounding the partition function.

97 MATHEMATICS AND COMPUTING↗

NASA NTRS2022

A Conceptual Framework to Integrate Biodiversity, Ecosystem Function, and Ecosystem Service Models

Global biodiversity and ecosystem service models typically operate independently. Ecosystem service projections may therefore be overly optimistic because they do not always account for the role of biodiversity in maintaining ecological functions. We review models used in recent global model intercomparison projects and develop a novel model integration framework to more fully account for the role of biodiversity in ecosystem function, a key gap for linking biodiversity changes to ecosystem services. We propose two integration pathways. The first uses empirical data on biodiversity–ecosystem function relationships to bridge biodiversity and ecosystem function models and could currently be implemented globally for systems and taxa with sufficient data. We also propose a trait-based approach involving greater incorporation of biodiversity into ecosystem function models. Pursuing both approaches will provide greater insight into biodiversity and ecosystem services projections. Integrating biodiversity, ecosystem function, and ecosystem service modeling will enhance policy development to meet global sustainability goals.

biodiversity models↗

NASA NTRSDate not supplied

Remote Sensing of Lineage Functional Types for Modeling and Monitoring Biodiversity

Hyperspectral remote sensing has the potential to continuously scale plant function and plant diversity information from landscape to global extents. Numerous studies have indicated that VSWIR (400-2500 nm) reflectance properties of vegetation capture evolutionarily conserved biochemical, structural, and other functional attributes of plant species. Spectral properties conserved in plants provide the opportunity to both 1) aggregate species into lineages with improved classification accuracy and 2) link those lineages directly to plant traits. Full realization of this goal will enable parameterization of Land Surface Models (LSMs) with remotely sensed information, e.g., canopy nitrogen, and better representations of biodiversity and functional diversity in biogeographic studies. In this study, we use hyperspectral AVIRIS data from the 2013 HyspIRI campaign over the Southern Sierra Nevada, California flight box to investigate the potential for incorporating evolutionary thinking into landcover classification. We link the airborne hyperspectral data with vegetation plot data from roughly 1372 surveys and a phylogeny representing 1361 species. We aggregate species into lineages ranging from species level groups down to similar number of Plant Functional Types as often used in LSMs. We assessed the ability of Random Forest and Partial Least Squares Discriminant Analysis to discriminate across these different phylogenetic scales and determine the optimal number of lineages to classify. Although there are some temporal and spatial differences in our training data, our best approaches achieved moderate classification accuracy (Kappa > 0.65). Given an optimal number of lineages, we explored approaches to improve classifications including machine learning and unmixing approaches. This work suggests that lineage-based methods may be a promising way to leverage the huge amounts of data that will come from high resolution and high return interval hyperspectral data planned for the Surface Biology and Geology mission with sparsely sampled existing ground-based ecological data.

Hyperspectral↗