Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “flow simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

A hydrological simulation dataset of the Upper Colorado River Basin from 1983 to 2019

Abstract This article presents a hydrological reconstruction of the Upper Colorado River Basin with an hourly temporal resolution, and 1-km spatial resolution from October 1982 to September 2019. The validated dataset includes a suite of hydrologic variables including streamflow, water table depth, snow water equivalent (SWE) and evapotranspiration (ET) simulated by an integrated hydrological model, ParFlow-CLM. The dataset was validated over the period with a combination of point observations and remotely sensed products. These datasets provide a long-term, natural-flow, simulation for one of the most over-allocated basins in the world.

54 ENVIRONMENTAL SCIENCES↗

Artificial Intelligence-Aided Wind Plant Optimization for Nationwide Evaluation of Land Use and Economic Benefits of Wake Steering

If clean energy pathways are to harness massive increases in wind power, innovations with broad geographic viability will be needed to support buildout in diverse locations. However, geodiversity in impact potential is seldom captured in technology assessment. Here we propose a scalable approach to plant-level optimization using artificial intelligence to evaluate land sparing and economic benefits of wake steering at more than 6,800 plausible onshore wind locations in the USA. This emerging controls strategy optimizes plant energy production by directing turbine wakes. On the basis of estimates from our artificial intelligence model trained on engineering wind flow simulations, co-optimizing plant layouts with wake steering can reduce land requirements by an average of 18% per plant (site-specific benefits range from 2% to 34%), subject to errors and uncertainties in the flow model, wind resource estimates, buildout scenario and geographic factors. According to model estimates, wake steering is predicted to increase power production during high-value (relatively low wind) periods, boosting the annual revenue of individual plants by up to US$3.7 million (equivalent to US$13,000 MW-1 yr-1) but producing negligible gains in some settings. Consideration of wake steering’s geographic potential reveals divergent nationwide prospects for improved economics and siting flexibility.

deployment↗

Topology Estimation using Graphical Models in Multi-Phase Power Distribution Grids

Power distribution grids are structurally operated radially, such that energized lines form a collection of trees with a substation at the root of each tree. The operational topology may change from time to time, however tracking these changes, even though important for the distribution grid operation and control, is hindered by limited real-time monitoring. This work develops a learning framework to reconstruct the radial operational structure of the distribution grid from synchronized voltage measurements. To detect operational lines our learning algorithm uses conditional independence tests for continuous random variables that is applicable to a wide class of probability distributions and Gaussian injections in particular. Furthermore, our algorithm applies to the practical case of unbalanced three-phase power flow. The performance is validated on AC power flow simulations over three phase IEEE distribution grid test cases.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Parallel Element Agglomeration Multilevel Monte Carlo Library (ParELAGMC)

ParELAGMC is a parallel distributed memory C++ library for multilevel Monte Carlo (MLMC) simulations with algebraically constructed coarse spaces for estimating statistical moments of a quantity of interest involving solutions of partial differential equations with uncertain coefficients. A primary focus of the library is the scalable generation of Gaussian random fields using a novel stochastic PDE (SPDE) sampling technique for large-scale simulations. A key feature in the SPDE sampling technique is a novel non-matching mesh embedding technique to mitigate artificial boundary artifacts that are inherent in the method. Example applications to uncertainty quantification of subsurface flow simulations in the mixed finite element setting are provided as well.

Osborn, SarahV.↗

Quantum Solver Using Singular Value Decomposition for Computational Fluid Dynamics

Numerical solutions for fluid flow problems are challenging and have been focus of Computational Fluid Dynamics (CFD) research for past several decades. The advent of quantum computing promises exponential speedup in comparison to existing classical methods and alleviate computational constraints posed by CFD problems. Although solutions for most problems of interest in fluid dynamics using quantum computing are distant, recent advances in algorithms, software and hardware provide a path towards realizing this goal. Quantum linear solver algorithms (QLSA) such as Harrow–Hassidim–Lloyd (HHL) and Variational Quantum Linear Solver (VQLS) have been successfully implemented to solve for canonical problems such as Hele-Shaw flow. However, these algorithms still suffer to scale and address problems with ill-conditioned Jacobians. In the current paper, we alleviate these restrictions with a new quantum solver based on Singular Value Decomposition (SVD) and simulate flow past a 2D cylinder. The fidelity of the SVD based quantum solver in predicting the flow past 2D cylinder is computed along with an assessment of errors. Classical and quantum solutions for the flow are compared for different resolutions. Finally, we discuss variation in the solutions based on number of shots used.

Gottiparthi, Kalyan [ORNL] (ORCID:0000000213540255↗

Comparison of the Amanzi Model against Analytical Solutions and the FEHM Model

This file documents Amanzi code verification of flow simulations for three selected cases: (1) an infinite strip aquifer embedded between two other aquifers, (2) a heterogeneous cylinder (or disc in 2D case) embedded in a background aquifer, and (3) uniform aquifers in bounded domains with fixed heads at the upper- and down-stream directions and no-flow at lateral boundaries. The original FORTRAN codes that solve the analytical solutions for cases (1) and (2) were obtained from Greg Ruskauf. Two modifications were made for compilation on Linux systems: (a) The keyword ‘mode’ in OPEN statements was removed because it is not standard, and (b) variables in COMMON blocks were re-arranged to eliminate a warning message (padding of additional 4 bytes). These codes were compiled using the gfortran compiler on the Linux environment. Note that these analytical solutions were derived for two-dimensional problems only, and therefore in numerical simulations, we used three-dimensional domains with unit thickness for comparison.

54 ENVIRONMENTAL SCIENCES↗

Large Eddy Simulation of the Flow Behavior in a Simplified Helical Coil Steam Generator

Large eddy simulation (LES) is conducted for the flow over the shell side of a helical coil steam generator (HCSG) heat exchanger. Simulations are conducted on a simplified experimental test section that represents a one-column region of the helical coils using half-rods. Although the rods are wall-bounded, the flow still exhibits the turbulent characteristics and fluctuations from vortex shedding that one would expect from crossflow around a cylinder. The spectral element, computational fluid dynamics (CFD) code Nek5000, is used to capture the physics, and the results are compared with particle image velocimetry (PIV) measurements. In order to ensure that the turbulence is resolved, analysis is conducted by using the Taylor length scales and normalized wall distance. Sensitivity to the inlet boundary conditions (BCs) and the spatial discretization for different polynomial order solutions are also studied, finding only minor differences between each case. Pressure drop and velocity statistics show reasonable agreement with PIV. Proper orthogonal decomposition (POD) analysis reveals that the primary modes are similar between experiment and simulation, although the LES predicts higher turbulent kinetic energy than does PIV. Overall, the study establishes the resolution and resources required in order to conduct a high-fidelity simulation over 12 helical rods.

Lai, Jonathan K.↗

Simulation Framework For Regional Geologic Co 2 Storage Along Arches Province Of Midwestern United States

This report presents final technical results for the project Simulation Framework for Regional Geologic CO 2 Storage Infrastructure along Arches Province of the Midwest United States. The Arches Simulation project was a three year effort designed to develop a simulation framework for regional geologic carbon dioxide (CO 2 ) storage infrastructure along the Arches Province through development of a geologic model and advanced reservoir simulations of large-scale CO 2 storage. The project included five major technical tasks: (1) compilation of geologic, hydraulic and injection data on Mount Simon, (2) development of model framework and parameters, (3) preliminary variable density flow simulations, (4) multi-phase model runs of regional storage scenarios, and (5) implications for regional storage feasibility. The Arches Province is an informal region in northeastern Indiana, northern Kentucky, western Ohio, and southern Michigan where sedimentary rock formations form broad arch and platform structures. In the province, the Mount Simon sandstone is an appealing deep saline formation for CO 2 storage because of the intersection of reservoir thickness and permeability. Many CO 2 sources are located in proximity to the Arches Province, and the area is adjacent to coal fired power plants along the Ohio River Valley corridor.

54 ENVIRONMENTAL SCIENCES↗

Hierarchical Engine for Large-scale Infrastructure Co-Simulation

HELICS is designed to support very-large-scale (100,000+ federates) cosimulations with off-the-shelf power-system, communication, market, and end-use tools. Other key features include cross platform operating system support, the integration of both event driven (e.g., packetized communication) and time-series (e.g., power flow) simulations, and the ability to co-iterate among federates to ensure physical model convergence at each time step.

Source record↗

Hierarchical Engine for Large-scale Infrastructure Co-Simulation

HELICS is designed to support very-large-scale (100,000+ federates) cosimulations with off-the-shelf power-system, communication, market, and end-use tools. Other key features include cross platform operating system support, the integration of both event driven (e.g., packetized communication) and time-series (e.g., power flow) simulations, and the ability to co-iterate among federates to ensure physical model convergence at each time step.

Source record↗

Brine flow up a borehole caused by pressure perturbation from CO2 storage: Static and dynamic evaluations

Industrial-scale storage of CO{sub 2} in saline sedimentary basins will cause zones of elevated pressure, larger than the CO{sub 2} plume itself. If permeable conduits (e.g., leaking wells) exist between the injection reservoir and overlying shallow aquifers, brine could be pushed upwards along these conduits and mix with groundwater resources. This paper discusses the potential for such brine leakage to occur in temperature- and salinity-stratified systems. Using static mass-balance calculations as well as dynamic well flow simulations, we evaluate the minimum reservoir pressure that would generate continuous migration of brine up a leaking wellbore into a freshwater aquifer. Since the brine invading the well is denser than the initial fluid in the wellbore, continuous flow only occurs if the pressure perturbation in the reservoir is large enough to overcome the increased fluid column weight after full invasion of brine into the well. If the threshold pressure is exceeded, brine flow rates are dependent on various hydraulic (and other) properties, in particular the effective permeability of the wellbore and the magnitude of pressure increase. If brine flow occurs outside of the well casing, e.g., in a permeable fracture zone between the well cement and the formation, the fluid/solute transfer between the migrating fluid and the surrounding rock units can strongly retard brine flow. At the same time, the threshold pressure for continuous flow to occur decreases compared to a case with no fluid/solute transfer.

54 ENVIRONMENTAL SCIENCES↗

Quantitative measurement of soot particle size distribution in premixed flames - The burner-stabilized stagnation flame approach

A burner-stabilized, stagnation flame technique is introduced. In this technique, a previously developed sampling probe is combined with a water-cooled circular plate such that the combination simultaneously acts as a flow stagnation surface and soot sample probe for mobility particle sizing. The technique allows for a rigorous definition of the boundary conditions of the flame with probe intrusion and enables less ambiguous comparison between experiment and model. Tests on a 16.3% ethylene-23.7% oxygen-argon flame at atmospheric pressure show that with the boundary temperatures of the burner and stagnation surfaces accurately determined, the entire temperature field may be reproduced by pseudo one-dimensional stagnation reacting flow simulation using these temperature values as the input boundary conditions. Soot particle size distribution functions were determined for the burner-stabilized, stagnation flame at several burner-to-stagnation surface separations. It was found that the tubular probe developed earlier perturbs the flow and flame temperature in a way which is better described by a one-dimensional stagnation reacting flow than by a burner-stabilized flame free of probe intrusion. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Exploratory Research: Transport and Transformation of Particulate Organic Matter in Permeable River Sediments

The hyporheic zone (HZ) is the volume of streambed sediments where surface water and groundwater mix. The mixing of ground and surface water geochemical constituents including organic matter and the presence of large microbial populations create an important location for biogeochemical activity. Large and periodic fluctuations in river stage such as those associated with operation of hydroelectric dams, may enhance downstream hyporheic exchange by reversing the direction of flow to/from the stream on a regular basis. Solute transport in hyporheic zones is affected by river regulation; however, little is known about the transport of particulate organic matter (POM) under these conditions. We performed a laboratory experiment to simulate the transport and retention of POM under conditions simulating flow reversal in the hyporheic zone. Here, POM is created by inoculating artificial river water with algae obtained from the Hanford Reach of the Columbia River. POM transport experiments are then conducted in columns packed with sandy sediments; these data are then used to calibrate a model describing fundamental processes controlling its transport in saturated sediments. Models results reveal that filtration, sorption to sediment, and sorption to previously retained POM are important mechanisms of POM retention in sandy, saturated sediments. Additionally, upon flow direction reversal, POM is readily mobilized leading to effluents concentrations above the initial input concentrations. These findings indicate that river stage changes may change POM storage in the hyporheic zone depending on the type and magnitude of flow variation.

54 ENVIRONMENTAL SCIENCES↗

Simulation of water flow in terrestrial systems

ParFlow is a parallel, variabley saturated groundwater flow code that is especially suitable for large scale problem. ParFlow simulates the three-dimensional saturated and variably saturated subsurface flow in heterogeneous porous media in three spatial dimensions. ParFlow's developemt and appkication has been on-ging for more than 10 uear. ParFlow has recently been extended to coupled surface-subsurface flow to enabel the simulation of hillslope runoff and channel routing in a truly integrated fashion. ParFlow simulates the three-dimensional varably saturated subsurface flow in strongly heterogeneous porous media in three spatial dimension.

Source record↗

Simulation of water flow in terrestrial systems

ParFlow is a parallel, variabley saturated groundwater flow code that is especially suitable for large scale problem. ParFlow simulates the three-dimensional saturated and variably saturated subsurface flow in heterogeneous porous media in three spatial dimensions. ParFlow's developemt and appkication has been on-ging for more than 10 uear. ParFlow has recently been extended to coupled surface-subsurface flow to enabel the simulation of hillslope runoff and channel routing in a truly integrated fashion. ParFlow simulates the three-dimensional varably saturated subsurface flow in strongly heterogeneous porous media in three spatial dimension.

Source record↗

TOUGH3-FLAC3D: a modeling approach for parallel computing of fluid flow and geomechanics

The recent development of the TOUGH3 code allows for a faster and more reliable fluid flow simulator. At the same time, new versions of FLAC3D are released periodically, allowing for new features and faster execution. In this paper, we present the first implementation of the coupling between TOUGH3 and FLAC3Dv6/7, maintaining parallel computing capabilities for the coupled fluid flow and geomechanical codes. We compare the newly developed version with analytical solutions and with the previous approach, and provide some performance analysis on different meshes and varying the number of running processors. Finally, we present two case studies related to fault reactivation during CO 2 sequestration and nuclear waste disposal. The use of parallel computing allows for meshes with a larger number of elements, and hence more detailed understanding of thermo-hydro-mechanical processes occurring at depth.

58 GEOSCIENCES↗

Numerical studies of CO 2 and brine leakage into a shallow aquifer through an open wellbore

Industrial-scale geological storage of CO 2 in saline aquifers may cause CO 2 and brine leakage from abandoned wells into shallow fresh aquifers. This leakage problem involves the flow dynamics in both the wellbore and the storage reservoir. T2Well/ECO2N, a coupled wellbore-reservoir flow simulator, was used to analyze CO 2 and brine leakage under different conditions with a hypothetical simulation model in water-CO 2 -brine systems. Parametric studies on CO 2 and brine leakage, including the salinity, excess pore pressure (EPP) and initially dissolved CO 2 mass fraction, are conducted to understand the mechanism of CO 2 migration. The results show that brine leakage rates increase proportionally with EPP and inversely with the salinity when EPP varies from 0.5 to 1.5 MPa; however, there is no CO 2 leakage into the shallow freshwater aquifer if EPP is less than 0.5 MPa. The dissolved CO 2 mass fraction shows an important influence on the CO 2 plume, as part of the dissolved CO 2 becomes a free phase. Scenario simulation shows that the gas lifting effect will significantly increase the brine leakage rate into the shallow freshwater aquifer under the scenario of 3.89% dissolved CO 2 mass fraction. The equivalent porous media (EPM) approach used to model the wellbore flow has been evaluated and results show that the EPM approach could either under- or over-estimate brine leakage rates under most scenarios. The discrepancies become more significant if a free CO 2 phase evolves. Therefore, a model that can correctly describe the complex flow dynamics in the wellbore is necessary for investigating the leakage problems.

58 GEOSCIENCES↗

Design of the HELICS High-Performance Transmission-Distribution-Communication-Market Co-Simulation Framework

This paper describes the design rationale for a new cyber-physical-energy co-simulation framework for electric power systems. This new framework will support very large-scale (100,000+ federates) co-simulations with off-the-shelf power-systems, communication, and end-use models. Other key features include cross-platform operating system support, integration of both event-driven (e.g. packetized communication) and time-series (e.g. power flow) simulation, and the ability to co-iterate among federates to ensure model convergence at each time step. After describing requirements, we begin by evaluating existing co-simulation frameworks, including HLA and FMI, and conclude that none provide the required features. Then we describe the design for the new layered co-simulation architecture.

24 POWER TRANSMISSION AND DISTRIBUTION↗