Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “fitting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

A power law fit to oxygen absorption at 60 GHz and its application to remote sensing of atmospheric temperature

The paper presents an empirical study of the oxygen spectrum near 60 GHz with reference to its applicability to the remote sensing of the tropospheric and lower stratospheric temperature. It is demonstrated that the absorption coefficient of oxygen at 60 GHz can be fitted to the power law form with a relative rms error of about 8%. The power law form, when used in conjunction with the weighting function, permits the definition of some basic quantities in the passive remote sensing of the atmospheric temperature. It is shown how the power law form has been utilized in processing data from the Nimbus 5 microwave spectrometer experiment. The algorithm presented can be applied to spectrometer experiments at infrared frequencies.

Poon, R. K. L.↗
NASA NTRS1980

Results from flight noise tests on a Viper turbojet fitted with ejector/suppressor nozzle systems

Noise tests have been performed on a range of advanced exhaust suppressors fitted to a Viper turbojet engine with the objective of evaluating systems potentially suitable for subsonic and supersonic aircraft. A key item in the suppressor systems was an acoustically lined ejector, and tests were made with and without this ejector. Flight tests were made using an HS-125 aircraft in England and were followed by outdoor static tests at NASA Ames Research Center. In addition, acoustic and propulsion measurements were made at static, and in simulated flight conditions, with the engine installed in the Ames 40- by 80-ft wind tunnel. The paper deals mainly with the flight test results. These show that the use of a lined ejector considerably increases the attenuation obtainable using a suppressor nozzle alone and largely confirm predictions made on the basis of previous model and static tests. The maximum measured attenuation adjusted to an altitude of 500 ft was 14 EPNdB at an ideal jet velocity of 2400 ft/sec using the suppressor/ejector design intended for supersonic application. Initial propulsion performance results from the Ames wind tunnel confirm previous smaller scale propulsion results from a Douglas facility.

Brooks, J. R.↗
NASA NTRS1980

Generation of boundary and boundary-layer fitting grids

The details of extended physical processes, such as the gas dynamic flow over an airfoil, the reactive flow through a combustor, or the electric field in a multi-contact transistor, are understood by solving the differential equations of a mathematical model of the process. The accuracy of finite difference methods for the numerical solution of the equations is increased if the underlying mesh fits the region boundaries and is closely spaced in regions where the solution is rapidly varying. Automatic methods for producing a satisfactorily adjusted mesh were developed for one dimensional problems. In one simple, effective scheme of this kind the unknown function and the distribution of mesh modes are found simultaneously, the nodes being placed so that they correspond to points uniformly spaced on the solution curve. In a two dimensional generalization, the nodes correspond to points equally spaced on the solution surface in two directions that are as nearly orthogonal as possible. Examples of such meshes are shown.

Ablow, C. M.↗
NASA NTRS1980

Boundary-fitted coordinates for regions with highly curved boundaries and reentrant boundaries

A procedure was developed using the differential equation approach for generating boundary fitted coordinates for regions with highly curved boundaries as well as reentrant boundaries, such as those encountered in breaking surface waves. The resulting coordinates are nearly orthogonal and can provide adequate resolution even in the reentrant region. Consistent treatment of end boundaries and the use of a systematic initialization scheme and advanced implicit numerical solution techniques make the procedure highly efficient. The method developed for implicit enforcement of the periodicity boundary condition should be beneficial in the analysis of turbomachinery flow applications.

Ghia, U.↗
NASA NTRS1980

Boundary-fitted coordinate systems for arbitrary computational regions

The method of Smith and Wiegel was used to generate meshes for mixer lobes and subsonic inlets that are compatible with flow analysis codes requiring a boundary fitted coordinate system. Successful application of this mesh generator required development of procedures to distribute the mesh points along the boundaries, to regulate the dependence of the connecting function to the local boundary slope, to concentrate the mesh into regions of special interest, and to modify the mesh grid so that it possessed a smooth progression of cell metrics and cell volumes in all directions. The method of Smith and Wiegel when coupled with the extensions mentioned above has proven to be easy to use and control for the inlet and mixer lobe geometries investigated.

Kowalski, E. J.↗
NASA NTRS1981

A multigrid method for the transonic full potential equation discretized with finite elements on an arbitrary body fitted mesh

A multigrid method for the acceleration of transonic potential flow calculations based on a Galerkin finite element approach is described. In order to allow the use of arbitrary body fitted meshes it is necessary to introduce nonuniform interpolation and residual weighting. Emphasis is put on the construction of these operators consistent with the finite element approximation, while standard successive line overrelaxation is used as a smoothing step. Substantial convergence acceleration is obtained and results are presented for different transonic flow configurations including shocks.

Deconinck, H.↗
NASA NTRS1980

Fitness variables and the lipid profile in United States astronauts

The study examines the relationship between several measures of fitness and the lipid profile in United States astronauts. Data were collected on 89 astronauts, previously selected (PSA) and newly selected (NSA), during their annual physical examinations. Several similarities were seen in the two groups. The PSA (mean age of 46.1) had a lower maximum oxygen capacity (41.7 ml kg/min vs. 47.5 ml kg/min); when adjusted for age, it was no different from the NSA (mean age 33.5). The PSA had similar body composition with 15.7% - lower than expected for age. The lipid profiles of the two groups were basically the same with the differences being a function of age. Compared to a normative population, the astronauts had similar cholesterols, lower triglycerides, and higher HDLs. The astronaut profiles were generally more favorable than the age-matched controls, which is felt to be a result of the self-supervised conditioning program and annual preventive medicine consultation and education.

Berry, M. A.↗
NASA NTRS1979

Calculation of the flow field in supersonic inlets using a bicharacteristics method with shock wave fitting

The results of weakly viscous flow analysis are presented. The flow field, including molecular transport, is computed with the aid of a bicharacteristic method. The bow shock wave and the internal shock wave are computed with the aid of a three-dimensional shock wave fitting procedure. Characteristic equations are presented, and numerical integration procedure is discussed. Here, an inverse marching scheme is employed in which the solution is obtained on space-like planes of constant x and on space curves defined by the intersections of the internal shock wave with the solid boundaries. The distance between solution planes is arrived at by the Courant-Friedrichs-Lewy stability criterion.

Vadyak, J.↗
NASA NTRS1981

Modal analysis using a Fourier analyzer, curve-fitting, and modal tuning

The proposed modal test program differs from single-input methods in that preliminary data may be acquired using multiple inputs, and modal tuning procedures may be employed to define closely spaced frquency modes more accurately or to make use of frequency response functions (FRF's) which are based on several input locations. In some respects the proposed modal test proram resembles earlier sine-sweep and sine-dwell testing in that broadband FRF's are acquired using several input locations, and tuning is employed to refine the modal parameter estimates. The major tasks performed in the proposed modal test program are outlined. Data acquisition and FFT processing, curve fitting, and modal tuning phases are described and examples are given to illustrate and evaluate them.

Craig, R. R., Jr.↗
NASA NTRS1982

Shock-fitted Euler solutions to shock vortex interactions

The interaction of a planar shock wave with one or more vortexes is computed using a pseudospectral method and a finite difference method. The development of the spectral method is emphasized. In both methods the shock wave is fitted as a boundary of the computational domain. The results show good agreement between both computational methods. The spectral method is, however, restricted to smaller time steps and requires use of filtering techniques.

Salas, M. D.↗
NASA NTRS1980

Documentation of program COORDC to generate and coordinate system for 3D corners with or without fillet using body fitted curvilinear coordinates, part 2

The computer program COORDC generates a body fitted curvilinear coordinate system for corner geometry with or without corner fillets. It is assumed that at any given xi, x remains constant; consequently the only variation is in y and z. It is also assumed that for all xi's in the physical plane the coordinate system in y-z plane is similar. This enables solution of coordinate system for one particular xi = 1 (x for xi = 1 is arbitrarily chosen to be 0.0) and the solution for all other xi plane can be easily specified once the coordinates in the physical plane on the line 1 or = to xi or = to IMAX, eta = 1, zeta = 1 are specified.

Kumar, D.↗
NASA NTRS1980

Documentation of program AFTBDY to generate coordinate system for 3D after body using body fitted curvilinear coordinates, part 1

The computer program AFTBDY generates a body fitted curvilinear coordinate system for a wedge curved after body. This wedge curved after body is being used in an experimental program. The coordinate system generated by AFTBDY is used to solve 3D compressible N.S. equations. The coordinate system in the physical plane is a cartesian x,y,z system, whereas, in the transformed plane a rectangular xi, eta, zeta system is used. The coordinate system generated is such that in the transformed plane coordinate spacing in the xi, eta, zeta direction is constant and equal to unity. The physical plane coordinate lines in the different regions are clustered heavily or sparsely depending on the regions where physical quantities to be solved for by the N.S. equations have high or low gradients. The coordinate distribution in the physical plane is such that x stays constant in eta and zeta direction, whereas, z stays constant in xi and eta direction. The desired distribution in x and z is input to the program. Consequently, only the y-coordinate is solved for by the program AFTBDY.

Kumar, D.↗
NASA NTRS1981

The use of intermolecular potential functions in fitting pressure induced spectra

An example is presented which demonstrates the importance of using physically realistic derivatives of the intermolecular potential when fitting pressure-induced spectra. The use of nonrealistic derivatives may mask second-order temperature effects in the theory. As the temperature decreases, the intermolecular potential may have an important angular dependence.

Goorvitch, D.↗
NASA NTRS1982

Generation of three-dimensional boundary-fitted curvilinear coordinate systems for wing/wing-tip geometries using the elliptic solver method

A three-dimensional elliptic solver technique is utilized to generate surface-fitted coordinates about wing/wing-tip configurations. The method is applicable to wings of arbitrary section profile and camber, leading-edge sweep, taper ratio, and spanwise thickness variation. The basic theory of three-dimensional elliptic mappings is developed along with a method to compute interior coordinate control functions. Examples of grids generated about several wing/wing-tip geometries are given. A 49 x 33 x 17 grid requires about 3 minutes of CPU time on a CYBER 203 computer.

Thames, F. C.↗
NASA NTRS1982

Fitting surfaces to scattered data

A variety of numerical methods for fitting a function to data given at a set of points scattered throughout a domain in the plane are surveyed. Four classes of methods are discussed: (1) global interpolation; (2) local interpolation; (3) global approximation; and (4) local approximation. Also, two-stage methods and contouring are discussed. The surfaces constructed include polynomials, spline functions, and rational functions, among others.

Schumaker, L. L.↗
NASA NTRS1982

Surface fitting with biharmonic and harmonic models

The physical and geometric interpretation of a surface fitting technique, multiquadric equations (MQ), is discussed. The relation of this method and its reciprocal form to biharmonic and harmonic techniques respectively, is pointed out. In both forms the solutions may be viewed as being numerical approximations of an integral equation in which an unknown density function is the physical source for disturbing potential (reciprocal-MQ) or elastic displacement (MQ).

Hardy, R. L.↗
NASA NTRS1982

Shock-fitted Euler solutions to shock-vortex interactions

The interaction of a shock wave with a hot spot, a single vortex and a vortex street is studied within the framework of the two dimensional compressible Euler equations. The numerical results obtained by the pseudospectral method and the finite difference MacCormack method are compared. In both the methods the shock wave is fitted as a boundary of the computational domain.

Salas, M. E.↗