Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “first principles calculation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Low‐Temperature Synthesis of Stable CaZn 2 P 2 Zintl Phosphide Thin Films as Candidate Top Absorbers

Abstract The development of tandem photovoltaics and photoelectrochemical solar cells requires new absorber materials with bandgaps in the range of ≈1.5–2.3 eV, for use in the top cell paired with a narrower‐gap bottom cell. An outstanding challenge is finding materials with suitable optoelectronic and defect properties, good operational stability, and synthesis conditions that preserve underlying device layers. This study demonstrates the Zintl phosphide compound CaZn 2 P 2 as a compelling candidate semiconductor for these applications. Phase‐pure, ≈500 nm‐thick CaZn 2 P 2 thin films are prepared using a scalable reactive sputter deposition process at growth temperatures as low as 100 °C, which is desirable for device integration. Ultraviolet‐visible spectroscopy shows that CaZn 2 P 2 films exhibit an optical absorptivity of ≈10 4 cm −1 at ≈1.95 eV direct bandgap. Room‐temperature photoluminescence (PL) measurements show near‐band‐edge optical emission, and time‐resolved microwave conductivity (TRMC) measurements indicate a photoexcited carrier lifetime of ≈30 ns. CaZn 2 P 2 is highly stable in both ambient conditions and moisture, as evidenced by PL and TRMC measurements. Experimental data are supported by first‐principles calculations, which indicate the absence of low‐formation‐energy, deep intrinsic defects. Overall, this study shall motivate future work integrating this potential top cell absorber material into tandem solar cells.

14 SOLAR ENERGY↗
DOE OSTI2020

Engineering Atomically Dispersed FeN 4 Active Sites for CO 2 Electroreduction

Atomically dispersed FeN 4 active sites have exhibited exceptional catalytic activity and selectivity for the electrochemical CO 2 reduction reaction (CO2RR) to CO. However, the understanding behind the intrinsic and morphological factors contributing to the catalytic properties of FeN 4 sites is still lacking. By using a Fe-N-C model catalyst derived from the ZIF-8, we deconvoluted three key morphological and structural elements of FeN 4 sites, including particle sizes of catalysts, Fe content, and Fe-N bond structures. Furthermore, their respective impacts on the CO2RR were comprehensively elucidated. Engineering the particle size and Fe doping is critical to control extrinsic morphological factors of FeN 4 sites for optimal porosity, electrochemically active surface areas, and the graphitization of the carbon support. In contrast, the intrinsic activity of FeN 4 sites was only tunable by varying thermal activation temperatures during the formation of FeN 4 sites, which impacted the length of the Fe-N bonds and the local strains. The structural evolution of Fe-N bonds was examined at the atomic level. First-principles calculations further elucidated the origin of intrinsic activity improvement associated with the optimal local strain of the Fe-N bond.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Interplay Between Stereochemically Active Lone Pair Repulsions, Sigma Hole Interactions, and Delocalized Redox Processes in Topochemical Fluoride‐Ion Insertion

Topochemical insertion/extraction of cations has emerged as a generalizable strategy for modulating the crystal and electronic structure of periodic solids. In contrast, strategies for topochemical anion insertion are poorly explored and fundamental principles for designing insertion hosts to accommodate anions remain scarce. Here, we observe reversible room-temperature fluoride-ion insertion within tunnels of Sn 2 TiO 4 defined by the stereochemical expression of Sn 5 s 2 lone pairs. X-ray scattering studies of fluoride-ion-insertion-induced crystal structure modulation and X-ray absorption/emission spectroscopy probes of electronic structure along with magnetic susceptibility measurements and first-principles calculations are used to decipher design principles underpinning reversible fluoride-ion insertion and bulk diffusion. Fluoride-ion insertion is enabled by a combination of a large, polarizable tunnel, delocalized redox at Ti─O─Sn centers, inherent repulsion between the fluoride-ion and Sn 5 s 2 electron lone pairs, and the formation of dative interactions between Sn-centered σ-holes and fluoride-ions, yielding a reversible capacity of 0.5 fluoride-ions per Sn 2 TiO 4 formula unit. Our results demonstrate that the complex interplay between dative interactions and stereochemically active lone pair repulsions is critical to defining the thermodynamics and kinetics controlling fluoride-ion insertion and diffusion. As such, the design of fluoride-ion insertion hosts for anion batteries requires site-selective modification to modulate lattice—ion interactions.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Revealing Parallel Inter‐ and Intra‐Ligand Charge Transfer Dynamics in [Ru(L) 2 (dppz)] 2+ Molecular Lightswitch with N K‐Edge X‐Ray Absorption Spectroscopy

In photoactive metal complexes the localization of photoexcited charges dictates the site of chemical reactivity, but few studies measure the charge redistribution in these systems with spatial precision. Herein, we track the inter- and intra-ligand charge transfer processes that underpin light-driven charge separation in the well-studied “molecular lightswitch” [Ru(bpy) 2 dppz] 2+ (aqueous [Ruthenium II (2,2′-bipyridine)2(dipyrido[3,2-a:2′,3′-c]phenazine)] 2+ [Cl − ] 2 ) by probing the electronic structure of ligand nitrogen atoms in real-time using ultrafast X-ray absorption spectroscopy and first principles calculations. We confirm the localization of excited electron density on the phenazine N atoms of dppz and we newly identify two parallel electron transfer pathways to populate this state. Sub-70 fs electron transfer to the phenazine portion of dppz is observed and attributed to intra-ligand electron transfer following Ru-to-dppz metal-to-ligand charge transfer (MLCT) excitation. This fast charge transfer was not reported in prior ultrafast studies. The slower (ca. 2 ps) charge transfer reported extensively in time-resolved optical absorption and emission studies is reassigned here to inter-ligand electron “hopping” between nearly isoenergetic ligand moieties following Ru-to-bpy MLCT excitation. In conclusion, the results demonstrate much faster charge separation than previously identified in this well-studied system, highlighting how extended azaacene ligand motifs promote the competitive charge transfer processes needed to drive light-driven electron transfer chemistry.

Donor-acceptor systems↗
DOE OSTI2023

Modified Dirac Fermions in the Crystalline Xenon and Graphene Moiré Heterostructure

Abstract The interface between two‐dimensional (2D) crystals often forms a Moiré superstructure that imposes a new periodicity, which is a key element in realizing complex electronic phases as evidenced in twisted bilayer graphene. Acombined angle‐resolved photoemission spectroscopy measurements and first‐principles calculations reveal the formation of a Moiré superstructure between a 2D Dirac semi‐metallic crystal, graphene, and a 2D insulating crystal of noble gas, xenon. Incommensurate diffraction pattern and folded Dirac cones around the Brillouin zone center imply the formation of hexagonal crystalline array of xenon atoms. The velocity of Dirac fermions increases upon the formation of the 2D xenon crystal on top of graphene due to the enhanced dielectric screening by the xenon over‐layer. These findings not only provide a novel method to produce a Moiré superstructure from the adsorption of noble gas on 2D materials, but also to control the physical properties of graphene by the formation of a graphene‐noble gas interface.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Designing Magnetic Properties in CrSBr through Hydrostatic Pressure and Ligand Substitution

Abstract Magnetic van der Waals (vdW) materials are a promising platform for producing atomically thin spintronic and optoelectronic devices. The A‐type antiferromagnet CrSBr has emerged as a particularly exciting material due to its high magnetic ordering temperature, semiconducting electrical properties, and enhanced chemical stability compared to other vdW magnets. Exploring mechanisms to tune its magnetic properties will facilitate the development of nanoscale devices based on vdW materials with designer magnetic properties. Here it is investigated how the magnetic properties of CrSBr change under pressure and ligand substitution. Pressure compresses the unit cell, increasing the interlayer exchange energy while lowering the Néel temperature. Ligand substitution, realized synthetically through Cl alloying, anisotropically compresses the unit cell and suppresses the Cr‐halogen covalency, reducing the magnetocrystalline anisotropy energy and decreasing the Néel temperature. A detailed structural analysis combined with first‐principles calculations reveals that alterations in the magnetic properties are intricately related to changes in direct Cr–Cr exchange interactions and the Cr–anion superexchange pathways. Further, it is demonstrated that Cl alloying enables chemical tuning of the interlayer coupling from antiferromagnetic to ferromagnetic, which is unique among known two‐dimensional magnets.

Telford, Evan J.↗
DOE OSTI2024

The Hard Ferromagnetism in FePS 3 Induced by Non‐Magnetic Molecular Intercalation

Abstract Manipulating the magnetic ground states of 2D magnets is a focal point of recent research efforts. Various methods have demonstrated efficacy in modulating the magnetic properties inherent to van der Waals (vdW) magnetic systems. Herein, the emergence of robust anisotropic ferromagnetism within antiferromagnetic FePS 3 is unveiled via intercalation with non‐magnetic pyridinium ions. A one‐step ion exchange reaction facilitates the formation of energetically favorable B‐phase and metastable P‐phase. Notably, both B‐ and P‐phases manifest hard ferromagnetic behavior, featuring substantial unsaturated coercive fields (>7 T) and high Curie temperatures (72–87 K). First‐principles calculations elucidate the pivotal role of electron transfer from pyridinium ions to FePS 3 in engineering magnetic exchange interactions. Calculated effective spin Hamiltonian corroborates the observed hard ferromagnetism in intercalated FePS 3 . This study offers crucial insights into hard magnetism in intercalated vdW materials, thereby presenting promising avenues for 2D vdW magnet‐based magnetic devices.

Ou, Yunbo↗
DOE OSTI2025

Cobalt–Nickel Exchange in Exfoliated Battery Layered Cathode Sheets with Application to Recycling

With the emerging dominance of electric vehicles (EV) in the transportation sector, recycling or upcycling spent battery materials will be required to reduce EV costs, lessen waste, and ease critical material supply chain issues for EV batteries. Here, motivated by work in the literature describing the exfoliation of layered oxides, first‐principles calculations are performed to show that Li x CoO 2 , if exfoliated into nanosheets, can readily undergo transition metal cation exchange in aqueous media. The substitution of Co 3+ or Co 4+ cations inside the sheet by Ni 2+ is associated with modest reaction barriers (Δ G* ≈ 0.3–0.7 eV) and is at most mildly endothermic (Δ G ≈ 0.2–0.3 eV). In contrast, previous battery degradation studies have shown that Co 3+ diffusion is strongly inhibited inside bulk layered oxides. This suggests that processing spent layered oxides as nanosheets can provide a potentially low‐energy‐cost pathway to altering the transition metal and/or dopant stoichiometry, which can be used toward developing new room‐temperature upcycling routes for cathodes from end‐of‐life batteries.

battery recycling↗
DOE OSTI2024

High‐pressure Synthesis of Cobalt Polynitrides: Unveiling Intriguing Crystal Structures and Nitridation Behavior

Abstract In this study, we conduct extensive high‐pressure experiments to investigate phase stability in the cobalt‐nitrogen system. Through a combination of synthesis in a laser‐heated diamond anvil cell, first‐principles calculations, Raman spectroscopy, and single‐crystal X‐ray diffraction, we establish the stability fields of known high‐pressure phases, hexagonal NiAs‐type CoN, and marcasite‐type CoN 2 within the pressure range of 50–90 GPa. We synthesize and characterize previously unknown nitrides, Co 3 N 2 ,Pnma‐CoN and two polynitrides, CoN 3 and CoN 5 , within the pressure range of 90–120 GPa. Both polynitrides exhibit novel types of polymeric nitrogen chains and networks. CoN 3 feature branched‐type nitrogen trimers (N 3 ) and CoN 5 show π‐bonded nitrogen chain. As the nitrogen content in the cobalt nitride increases, the CoN 6 polyhedral frameworks transit from face‐sharing (in CoN) to edge‐sharing (in CoN 2 and CoN 3 ), and finally to isolated (in CoN 5 ). Our study provides insights into the intricate interplay between structure evolution, bonding arrangements, and high‐pressure synthesis in polynitrides, expanding the knowledge for the development of advanced energy materials

Chemistry↗
DOE OSTI2020

Dialing in Direct Air Capture of CO 2 by Crystal Engineering of Bis-iminoguanidines

Direct air capture (DAC) technologies that extract carbon dioxide from the atmosphere via chemical processes have the potential to restore the atmospheric CO 2 concentration to an optimal level. This study elucidates structure-property relationships in DAC by crystallization of bis-iminoguanidine (BIG) carbonate salts. Here, their crystal structures are analyzed by X-ray and neutron diffraction to accurately measure key structural parameters including molecular conformations, hydrogen bonding, and π-stacking. Experimental measurements of key properties, such as aqueous solubilities and regeneration energies and temperatures, are complemented by first-principles calculations of lattice and hydration free energies, as well as free energies of reactions with CO 2 , and BIG regenerations. Minor structural modifications in the molecular structure of the BIGs are found to result in major changes in the crystal structures and the aqueous solubilities within the series, leading to enhanced DAC.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Metal–Nitrogen–Carbon Cluster–Decorated Titanium Carbide is a Durable and Inexpensive Oxygen Reduction Reaction Electrocatalyst

Clusters of nitrogen- and carbon-coordinated transition metals dispersed in a carbon matrix (e. g., Fe-N-C) have emerged as an inexpensive class of electrocatalysts for the oxygen reduction reaction (ORR). In this work, it was shown that optimizing the interaction between the nitrogen-coordinated transition metal clusters embedded in a more stable and corrosion-resistant carbide matrix yielded an ORR electrocatalyst with enhanced activity and stability compared to Fe-N-C catalysts. Utilizing first-principles calculations, an electrostatics-based descriptor of catalytic activity was identified, and nitrogen-coordinated iron (FeN 4 ) clusters embedded in a TiC matrix were predicted to be an efficient platinum-group metal (PGM)-free ORR electrocatalyst. Guided by theory, selected catalyst formulations were synthesized, and it was demonstrated that the experimentally observed trends in activity fell exactly in line with the descriptor-derived theoretical predictions. The Fe-N-TiC catalyst exhibited enhanced activity (20 %) and durability (3.5-fold improvement) compared to a traditional Fe-N-C catalyst. It was posited that the electrostatics-based descriptor provides a powerful platform for the design of active and stable PGM-free electrocatalysts and heterogenous single-atom catalysts for other electrochemical reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Elucidating the Reaction Pathways of Veratrylglycero-β-Guaiacyl Ether Degradation over Metal-Free Solid Acid Catalyst with Hydrogen

Efficient cleavage of β-O-4 bonds in lignin to high-yield aromatic compounds for the potential production of fuels and chemicals is vital for the economics of the modern biorefinery industry. This work is distinct in that a detailed mechanistic analysis of the reaction pathways of veratrylglycero-β-guaiacyl ether (VGE) catalyzed by transition-metal-free solid acid zeolite in aqueous conditions at high hydrogen pressure has been performed. VGE degradation produced high monomers yields (≈87 %), including guaiacol (48.2 %), 1-(3,4-dimethoxyphenyl)ethanol (10.3 %), 1-(3,4-dimethoxyphenyl)-2-propanol (6.1 %), 3,4-dimethoxyphenylpropanol (4.7 %), 3,4-dimethoxycinnamyl alcohol (4.1 %), and 1,2-dimethoxy-4-propylbenzene (2 %). The products were identified and confirmed by the in situ solid-state magic angle spinning (MAS) 13 C NMR spectroscopy in real-time conditions and the two-dimensional gas chromatography (GC×GC). A variety of products reveal the crucial role of hydrogen, water, and acid sites for heterolytic cleavage of the β-O-4 bond in VGE. Decarbonylation, hydrogenolysis, hydrogenation, and dehydration reaction pathways are proposed and further validated using first-principles calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Structural Determinants of the Binding and Activation of Estrogen Receptor α by Phenolic Thieno[2,3- d ]pyrimidines

Synthetic, structural, and computational approaches were used to solve the puzzle as to how a phenolic nonsteroidal estrogen 1 with only a single H-bond to its receptor was more potent than an isomer 2 which formed an intricate network of H-bonds. Synthesis of a series of substituted phenols revealed that pK a was not a determinant of estrogenic activity. First-principles calculation also failed to explain the difference in activity of 1 and 2. Molecular dynamics revealed that 1 formed a more stable receptor complex compared to 2, which may explain its increased activity despite forming fewer apparent H-bonds with the protein.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Metal-to-insulator transition in oxide semimetals by anion doping

Dirac semimetals exhibiting nontrivial topological characteristics stand as exemplary parent compounds, offering great promise for the realization of novel electronic states. These materials also serve as a versatile platform for systematically investigating topological quantum phase transitions. In this study, we present compelling evidence of profound structural and transport phase shifts in a recently uncovered oxide Dirac semimetal, SrNbO3, achieved through effective in situ anion doping. Notably, a remarkable increase in resistivity of more than three orders of magnitude at room temperature is observed upon nitrogen-doping. The extent of electronic modulation in SrNbO3 is strongly correlated with the misfit strain, underscoring its phase instability to both chemical doping and crystallographic symmetry variations. Using first-principles calculations, we discern that elevating the level of nitrogen doping induces an upward shift in the conductive bands of SrNbO3-?N?. Consequently, a transition from a metallic state to an insulating state becomes apparent as the nitrogen concentration reaches a threshold of 1/3. This investigation sheds light on the potential of anion engineering in oxide Dirac semimetals, offering pathways for manipulating their physical properties. These insights hold promise for future applications that harness these materials for tailored functionalities.

Hong, Haitao↗
DOE OSTI2022

Super‐Hydrophilic Microporous Ni(OH) x /Ni 3 S 2 Heterostructure Electrocatalyst for Large‐Current‐Density Hydrogen Evolution

Abstract Exploiting active and stable non‐precious metal electrocatalysts for alkaline hydrogen evolution reaction (HER) at large current density plays a key role in realizing large‐scale industrial hydrogen generation. Herein, a self‐supported microporous Ni(OH) x /Ni 3 S 2 heterostructure electrocatalyst on nickel foam (Ni(OH) x /Ni 3 S 2 /NF) that possesses super‐hydrophilic property through an electrochemical process is rationally designed and fabricated. Benefiting from the super‐hydrophilic property, microporous feature, and self‐supported structure, the electrocatalyst exhibits an exceptional HER performance at large current density in 1.0 M KOH, only requiring low overpotential of 126, 193, and 238 mV to reach a current density of 100, 500, and 1000 mA cm −2 , respectively, and displaying a long‐term durability up to 1000 h, which is among the state‐of‐the‐art non‐precious metal electrocatalysts. Combining hard X‐rays absorption spectroscopy and first‐principles calculation, it also reveals that the strong electronic coupling at the interface of the heterostructure facilitates the dissociation of H 2 O molecular, accelerating the HER kinetics in alkaline electrolyte. This work sheds a light on developing advanced non‐precious metal electrocatalysts for industrial hydrogen production by means of constructing a super‐hydrophilic microporous heterostructure.

Chemistry↗
DOE OSTI2023

Tailoring the Angular Mismatch in MoS 2 Homobilayers through Deformation Fields

Ultrathin MoS 2 has shown remarkable characteristics at the atomic scale with an immutable disorder to weak external stimuli. Ion beam modification unlocks the potential to selectively tune the size, concentration, and morphology of defects produced at the site of impact in 2D materials. Combining experiments, first-principles calculations, atomistic simulations, and transfer learning, it is shown that irradiation-induced defects can induce a rotation-dependent moiré pattern in vertically stacked homobilayers of MoS 2 by deforming the atomically thin material and exciting surface acoustic waves (SAWs). Furthermore, the direct correlation between stress and lattice disorder by probing the intrinsic defects and atomic environments are demonstrated. The method introduced in this paper sheds light on how engineering defects in the lattice can be used to tailor the angular mismatch in van der Waals (vdW) solids.

2D materials↗
DOE OSTI2024

Multi‐Objective Optimization for Rapid Identification of Novel Compound Metals for Interconnect Applications

Abstract Interconnect materials play the critical role of routing energy and information in integrated circuits. However, established bulk conductors, such as copper, perform poorly when scaled down beyond 10 nm, limiting the scalability of logic devices. Here, a multi‐objective search is developed, combined with first‐principles calculations, to rapidly screen over 15,000 materials and discover new interconnect candidates. This approach simultaneously optimizes the bulk electronic conductivity, surface scattering time, and chemical stability using physically motivated surrogate properties accessible from materials databases. Promising local interconnects are identified that have the potential to outperform ruthenium, the current state‐of‐the‐art post‐Cu material, and also semi‐global interconnects with potentially large skin depths at the GHz operation frequency. The approach is validated on one of the identified candidates, CoPt, using both ab initio and experimental transport studies, showcasing its potential to supplant Ru and Cu for future local interconnects.

Chemistry↗