Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “feature design”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Low-cost, air mass 2 solar simulator

A low cost air mass 2 solar simulator for testing flat-plate solar collectors was developed and operated at Lewis. Total cost was less than $10,800/sq m ($1000/sq ft). It consists of an array of 143 tungsten-halogen 300-watt lamps, each having integral dichroic coated reflectors. A second array of 143 respective hexagonal-shaped plastic Fresnel lenses are located approximately 1 focal length from the lamps. The simulator will produce a uniform collimated beam covering an area of 1.2 by 1.2m(4 by 4 ft). Design features, construction details, and component costs are given, as well as measured results on a 12-lamp prototype.

Yass, K.↗
NASA NTRS1974

Evaluation of a stall-flutter spring-damper pushrod in the rotating control system of a CH-54B helicopter

Results of a design and flight test program conducted to define the effect of rotating pushrod damping on stall-flutter induced control loads are presented. The CH-54B helicopter was chosen as the test aircraft because it exhibited stall induced control loads. Damping was introduced into the CH-54B control system by replacing the standard pushrod with spring-damper assemblies. Design features of the spring-damper are described and the results of a dynamic analysis are shown which define the pushrod stiffness and damping requirements. Flight test measurements taken at 47,000 lb gross weight with and without the damper are presented. The results indicate that the spring-damper pushrods reduced high frequency, stall-induced rotating control loads by almost 50%. Fixed system control loads were reduced by 40%. Handling qualities in stall were unchanged, as expected.

Nettles, W. E.↗
NASA NTRS1973

Restartable solid motor stage for shuttle applications

The application of restartable solid motor stages to shuttle missions has been shown to provide a viable supplement to the shuttle program. Restartable solid motors in the 3000 pound class provide a small expendable transfer stage that reduces the demand on the shuttle for the lower energy missions. Shuttle operational requirements and preliminary performance data provided an input for defining design features required for restartable solid motor applications. These data provided a basis for a configuration definition that is compatible with shuttle operations. Mission by mission analysis showed the impact on a NASA supplied mission model. The results showed a 15% reduction in the number of shuttle flights required. In addition the amount of shuttle capability used to complete the mission objectives was significantly reduced. For example, in the 1979 missions there was a 62% reduction in shuttle capability used. The study also showed that the solid motor could provide a supplement to the TUG that would allow TUGS to be used in a recoverable rather than an expendable mode. The study shows a 71% reduction in the number of TUGs that would be expended.

Rohrbaugh, D. J.↗
NASA NTRS1973

Satellite control mercury ion thruster

Program status is reviewed for development of an 8-cm structurally integrated ion thruster for application to attitude control and stationkeeping of synchronous satellites. The system is designed to achieve a thrust level of 1 and 2 mlb at a beam voltage of 1200 V, a propellant-utilization efficiency of 85%, and electrical efficiency of 75%. Thrust vectoring will be implemented by a dished-gird roll misalignment system. Design features are incorporated which ensure thruster life of 20,000 hours, with 10,000 thruster-start cycles and 100,000 beam-deflection cycles.

Hyman, J., Jr.↗
NASA NTRS1973

An advanced highly mobile 8 psig pressure glove

Description of the current status and design features of the advanced highly mobile 8-psig-pressure Phase-I and Phase-II gloves. Advantages and shortcomings of the Phase-I glove are reviewed. The Phase-II glove is expected to provide the nearly optimum mobility and tactility required for an effective extravehicular-activity system.

Elkins, W.↗
NASA NTRS1973

The future look in rocket engines

The Space Shuttle Main Engine and an Aerospike engine for the Space Tug illustrate the rocket engines of the future. This paper includes a description of design features leading to high performance, long life, and low cost. Computer control of the engine, turnaround maintenance plans, and engine development plans are also discussed.

Sanchini, D. J.↗
NASA NTRS1974

Thermal design of the Viking lander capsule

During the summer of 1975, two Viking spacecraft will be launched toward Mars, each consisting of a lander capsule coupled to an orbiter. About a year later, the orbiters will go into orbit around Mars and then the landers will descend to begin operation on the surface of Mars for 90 day missions. This paper describes the thermal control aspects of the lander capsule design and operation. The paper presents the thermal control requirements, the design philosophy and approach to solving these thermal problems, and then a description of the resulting thermal control subsystem design features. It concludes with a summary of the vehicle thermal performance characteristics as determined from both analysis and system tests under simulated thermal environments.

Tracey, T. R.↗
NASA NTRS1974

Noise reduction programs for DC-8 and DC-9 airplanes

A summary review is presented of the results of current and recently completed noise-reduction programs for DC-8 and DC-9 airplanes. The relationship of these programs to other efforts by Douglas to develop quieter CTOL airplanes is briefly outlined. The engine/nacelle concepts studied were: (1) application of nacelle acoustic treatment, (2) variable-area exhaust nozzles, (3) jet exhaust noise suppressors, and (4) engines with larger-diameter new front fans. Acoustic analyses leading to the selection of certain engine/nacelle configurations are described, as well as design constraints which limit the noise reduction capability of certain designs. Acoustic design features of the modified engine/nacelles are discussed along with estimates of the changes in aircraft community noise levels, as well as estimates of the changes in aircraft weight, performance, cost, and operational restrictions.

Frasca, R. L.↗
NASA NTRS1974

Development of a filter regeneration system for advanced spacecraft fluid systems

The development of a filter regeneration system for efficiently cleaning fluid particulate filters is presented. Based on a backflush/jet impingement technique, the regeneration system demonstrated a cleaning efficiency of 98.7 to 100%. The operating principles and design features are discussed with emphasis on the primary system components that include a regenerable filter, vortex particle separator, and zero-g particle trap. Techniques and equipment used for ground and zero-g performance tests are described. Test results and conclusions, as well as possible areas for commercial application, are included.

Behrend, A. F., Jr.↗
NASA NTRS1974

Hot-wire anemometry for in-flight measurement of aircraft wake vortices

An airborne hot-wire anemometry system capable of providing data concerning the vortex structure in the wake of a preceding aircraft has been used in several flight studies. The design features of this technique and the operational experience with it are described. This development program has resulted in a flight-test technique that can make accurate velocity measurements in flow regimes where large velocity gradients occur.

Jacobsen, R. A.↗
NASA NTRS1974

Axial pumps for propulsion systems

The development of axial flow hydrogen pumps is examined. The design features and the performance data obtained during the course of the development programs are discussed. The problems created by the pump characteristics are analyzed. Graphs of four stage pump performance for various turbine blade configurations are developed. The characteristics and performance of a variety of pumps are included.

Huppert, M. C.↗
NASA NTRS1975

Tug fleet and ground operations schedules and controls. Volume 2: part 2, addenda

The results of a study to assess the tug safing requirements at postlanding are presented. The study considered the normal (green light) conditions from orbiter landing to completion of preparations for the next launch. Normal tug ground turnaround operations include handling and transportation activities and the performance of inspections, tests, and checkout functions. These activities dictate that hazards to ground personnel, the tug, GSE, facilities, and ecology be reduced to the lowest practical level consistent with program objectives, cost, and schedules. During flight operations, the tug contains energy sources that constitute potential hazards but are required for mission accomplishment. These potential hazards have been reduced to an acceptable level for flight operation by design features and by providing for control of energy sources.

Source record↗
NASA NTRS1975

Interfacial insert for electrical connectors

The development of interfacial inserts for improved electric connectors is discussed. The inserts were manufactured from epoxy resins. The design features of the inserts and the manufacturing equipment are described. The reliability test program is reported. Drawings of the interfacial inserts are provided.

Macavay, D.↗
NASA NTRS1975

Gas sampling method for determining pollutant concentrations in the flame zone of two swirl-can combustor modules

A gas sampling probe and traversing mechanism were developed to obtain detailed measurements of gaseous pollutant concentrations in the primary and mixing regions of combustors in order to better understand how pollutants are formed. The gas sampling probe was actuated by a three-degree-of-freedom traversing mechanism and the samples obtained were analyzed by an on-line gas analysis system. The pollutants in the flame zone of two different swirl-can combustor modules were measured at an inlet-air temperature of 590 K, pressure of 6 atmospheres, and reference velocities of 23 and 30 meters per second at a fuel-air ratio of 0.02. Typical results show large spatial gradients in the gaseous pollutant concentration close to the swirl-can module. Average concentrations of unburned hydrocarbons and carbon monoxide decrease rapidly in the downstream wake regions of each module. By careful and detailed probing, the effect of various module design features on pollutant formation can be assessed. The techniques presently developed seem adequate to obtain the desired information.

Duerr, R. A.↗
NASA NTRS1975

Design and performance of the University of Michigan 6.6-inch hypersonic wind tunnel

The tunnel described has several design features intended to maintain laminar flow in the boundary layer of its nozzle. Measurements show that transition to turbulence in the nozzle wall boundary layer begins at the throat and is sensitive to surface roughness, heat transfer rate, and longitudinal radius of curvature. The observed dependence of transition on heat transfer rate is the reverse of that predicted by stability theory for infinitesimal disturbances. Tests include boundary layer surveys of a contoured nozzle and a conical nozzle with four interchangeable throats.

Amick, J. L.↗
NASA NTRS1975

An observation on tone cut-off in static test data from jet engine fans

The far-field acoustic data for eight full-scale fans tested at a NASA-Lewis outdoor facility were analyzed for the effect of a cut-off design feature where the number of rotor and stator blades are proportioned so that the blade-passage tone will not propagate. Inlet flow distortions, prevalent during static testing, interact with the rotor to generate tones that generally mask this cut-off phenomenon. Distortion tone properties previously evaluated are used to analyze the tones propagating from the aft fan duct. The analyzed data clearly differentiated the fans that are and are not cut-off.

Heidmann, M. F.↗
NASA NTRS1975

Simulator evaluation of a perspective clipped-pole display and a thrust-vector controller for VTOL zero-zero landings

Five pilots participated in a simulator study to evaluate design features of a perspective clipped pole display and a side arm thrust vector controller for potential applications to VTOL zero visibility landings. Analyses of objective measures by a t test for related means showed significant learning effects, but did not show significant performance differences among display conditions. A mean longitudinal touchdown velocity of less than 4 knots, a mean vertical touchdown velocity of less than 1.22m/sec, and a mean longitudinal position error of approximately 15.24 m were attained during the final 10 trials of the experiment. The conclusion that adequate airspeed and altitude cues could be obtained from the glideslope and runway poles is supported by the absence of significant performance differences among display conditions.

Murphy, M. R.↗
NASA NTRS1974

SNAP 19 Viking RTG flight configuration and integration testing

The Viking-75 mission environments and lander interface requirements which influence the design of the RTG (radioisotope thermoelectric generator), as well as RTG-related constraints are discussed. The baseline RTG design evolved from these considerations is presented with particular emphasis on the design features which make the Viking RTG unique. These features include a gas management system employing a separate gas reservoir to maintain the RTG hot junction and heat source temperatures within a desired range throughout the various mission phases, as well as a specially profiled housing/radiator assembly which facilitates both ground cooling of the RTGs prior to launch and thermal control of the lander after landing. Also presented is the expected RTG electrical performance when subjected to the various mission environments/requirements, such as 'power-up' operations in Mars orbit just prior to the entry, and thermal cycling on the Martian surface after landing.

Brittain, W. M.↗