Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “facilitation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Origin of Stabilization of Ligand-Centered Mixed Valence Ruthenium Azopyridine Complexes: DFT Insights for Neuromorphic Applications

Redox-driven conductance changes are critical processes in molecular- and coordination-complex-based memristive thin films and devices that are envisioned for neuromorphic technologies, but fundamental mechanisms of conductance switching are not fully understood. Here, we explore charge disproportionation (CD) processes in [Ru II L 2 ](PF 6 ) 2 molecular systems that intrinsically involve interfragment charge transfer (IFCT). Using a combination of ab initio molecular dynamics simulation (AIMD), time-dependent density functional theory (TD-DFT), and density functional theory (DFT) calculations, we investigate the electron transfer mechanisms and the roles of temperature and cell volumetric expansion in facilitating the counterion movements and electronic transitions required for low-cost IFCT and charge redistribution. A detailed analysis of the density of states and TD-DFT calculations highlights that unpaired electrons play a crucial role in low-energy transitions, with the azo (N=N) groups of the ligand serving as the primary sites for electronic transport between molecular fragments, further stabilizing the asymmetric state. Localization of added electrons on azo ligands occurs with negligible change at the Ru centers, supported by atomic volume expansions up to +4.74 bohr 3 , and goes along with a progressive reduction of the HOMO−LUMO gap across redox states, suggesting enhanced conductivity. The TD-DFT analysis reveals a dominant IFCT excitation at 2082.76 nm in the doubly reduced (22) state, while a stabilization energy of 1.20 eV of the asymmetric (13) state relative to the symmetric (22) state is predicted by constrained DFT. Periodic DFT and AIMD simulations emulating a molecular film show that the stabilization of the asymmetric state, relative to a symmetric one, translates in net charge separation values (order of ∼0.33 e) that are strongly linked to increased counterion mobility (average counterion displacements exceeding 0.7 Å per atom during CD events) and the involvement of azo groups in electron redistribution. These findings, which align with previously reported experimental and computational data, provide key insights into the IFCT mechanisms and electronic transport facilitated by azo groups, with important implications for redox-driven memristive and neuromorphic technologies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Identifying Topological Defects in Lamellar Phases through Contour Analysis of Complex Wave Fields

Lamellar phases frequently contain structural imperfections that significantly affect their behaviors and properties. Our previous research successfully reconstructed real-space configurations of defective lamellar phases from diffuse scattering patterns, indicating the presence of phase vortices as a potential method for identifying topological defects disrupting the smectic ordering. Here, this report presents a mathematical framework using regularized wave fields to represent defective lamellar structures in real space. Phase singularities, resulting from the interference of random waves and indicating lamellar order disruption, are identified through a contour integral. These wave fields, derived from coherent scattering in reciprocal space, were validated via computational benchmarks analyzing small-angle neutron scattering data from AOT surfactant solutions, facilitating further statistical analysis of the defects. Our study highlights the potential to extract meaningful information about topological defects in lyotropic phases by inversely analyzing experimentally measured two-point static correlations. Our method allows for detailed structural analysis of various lyotropic phases, both particulate and nonparticulate, in their quiescent states and facilitates quantitative investigation of defects’ role in phase transitions. By integrating small-angle scattering, deep learning, and vortex tangle analysis, our comprehensive approach shows promise in addressing complex challenges in the structural analysis of soft matter systems.

36 MATERIALS SCIENCE↗

Layer Edge States Stabilized by Internal Electric Fields in Two-Dimensional Hybrid Perovskites

Two-dimensional (2D) organic-inorganic hybrid perovskites have been intensively explored in recent years due to their tunable band gaps and exciton binding energies and increased stability with respect to three-dimensional (3D) hybrid perovskites. Experimental observations suggest the existence of localized edge states in 2D hybrid perovskites which facilitate extremely efficient electron-hole dissociation and long carrier lifetimes, while multiple origins for their formation have been proposed. Using first-principles calculations, we demonstrate that layer edge states are stabilized by internal electric fields created by polarized molecular alignment of organic cations in 2D hybrid perovskites when they are two layers or thicker. Overall, our study gives a simple physical explanation of the edge state formation, and facilitating the design and manipulation of layer edge states for optoelectronic applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dual Functional Ni3S2@Ni Core-Shell Nanoparticles Decorating Nanoporous Carbon as Cathode Scaffolds for Lithium-Sulfur Battery with Lean Electrolytes

Lithium-sulfur batteries are very promising for next-generation energy storage. However, most studies use flooded electrolytes to achieve a high specific capacity at the expense of lowering the specific energy. Understanding lithium-sulfur battery performance with lean electrolytes is highly desirable. Herein, a modified Pechini method is developed to synthesize a nanoporous carbon host decorated with Ni3S2@Ni particles. Such a cathode delivers enhanced specific capacities with extended cycling life in lean electrolytes, due to the dual functions of the Ni3S2 shell, which can both facilitate reaction kinetics and promote electrolyte wetting. This work highlights a strategy to rationally design cathodes for highenergy lithium-sulfur batteries.

Zhang, Yulun↗

Evaluation of Amorphous Oxide Coatings for High-Voltage Li-Ion Battery Applications Using a First-Principles Framework

Cathode surface coatings are widely used industrially as a means to suppress degradation and improve electrochemical performance of lithium-ion batteries. However, developing an optimal coating is challenging, as different coating materials may enhance one aspect of performance while hindering another. Furthermore, to elucidate the fundamental thermodynamic and transport properties of amorphous cathode coating materials, here, we present a framework for calculating and analyzing the Li + and O 2- transport and the stability against delithiation in such materials. Our framework includes systematic workflows of ab-initio molecular dynamics calculations to obtain amorphous structures and diffusion trajectories coupled with an analysis of critical changes of the active-ion local environment during diffusion. Based on these data, we provide an estimate of room-temperature diffusivities, including statistical error bars, and the evaluation of the coating suitability in terms of its ability to facilitate Li + transport while blocking O 2- transport. Finally, we add the thermodynamic stability analysis of the coating chemistry within the operating voltage of common Li-ion cathodes. We apply this framework to two commonly used amorphous coating materials, Al 2 O 3 and ZnO. We find that (1) in general, a higher Li + content increases both Li + and O 2- diffusivities in both Al 2 O 3 and ZnO. Also, Li + and O 2- diffuse much faster in ZnO than in Al 2 O 3 . (2) However, neither Al 2 O 3 nor ZnO is expected to retain a significant concentration of Li + at high charge. (3) ZnO performs much more poorly in terms of O 2- blocking, and hence, Al 2 O 3 is preferred for high-voltage cathode applications. These results will help to quantitatively evaluate amorphous materials, such as metal oxides and fluorides, for different performance metrics and facilitate the development of optimal cathode coatings.

25 ENERGY STORAGE↗

Nanoscale Interfacial Smoothing and Dissolution during Unconventional Reservoir Stimulation Implications for Hydrocarbon Mobilization and Transport

Hydraulic fracturing of low-permeability rocks significantly enhances hydrocarbon production from unconventional reservoirs. However, fluid transport through low-permeability rocks, and the influence of geochemical transformations on pore networks, are poorly constrained. Mineral reactivity during interactions with injected water may alter the physical nature of the rock, which may affect hydrocarbon mobility. To assess alteration to the rock, we previously conducted a hydrothermal experiment that reacted cubed rock samples (1 cm3) with synthetic hydraulic fracturing fluid to simulate physicochemical reactivity during hydraulic fracturing. We analyzed unreacted and reacted rocks by small-angle neutron scattering and high-pressure mercury intrusion to determine how nanoscale (~1-1400 nm) pore networks of unconventional reservoir rocks are influenced by reaction with hydraulic fracturing injectates. We show that fluid-rock interactions have a two-fold influence on hydrocarbon recovery, promoting both hydrocarbon mobilization and transport. Pore-matrix interfaces smooth via removal of clay mineral surface asperities, reducing available surface area for hydrocarbon adsorption by ca. 12-75%. Additionally, hydraulic fracturing fluid-induced dissolution creates new pores with diameters ranging in size from 800-1400 nm, increasing the permeability of the rocks by a factor of 5-10. These two consequences of mineral dissolution act in concert to release hydrocarbons from the host rock and facilitate transport through the rock during unconventional reservoir production.

Herz-Thyhsen, Ryan↗

Area-Scalable Zn 2 SnO 4 Electron Transport Layer for Highly Efficient and Stable Perovskite Solar Modules

The development of a scalable chemical bath deposition (CBD) process facilitates the realization of electron-transporting layers (ETLs) for large-area perovskite solar modules (PSMs). In this work, a method to prepare a uniform and scalable thick Zn 2 SnO 4 ETL by CBD, which yielded high-performance PSMs, is reported. This Zn 2 SnO 4 ETL exhibits excellent electrical properties and enhanced optical transmittance in the visible region. Moreover, the Zn 2 SnO 4 ETL influences the perovskite layer formation, yielding enhanced crystallinity, increased grain size, and a smoother surface, thus facilitating electron extraction and collection from the perovskite to the ETL. Zn 2 SnO 4 thereby yields PSMs with a remarkable photovoltaic performance, low hysteresis index, and high device reproducibility. The champion PSM exhibited a power conversion efficiency (PCE) of 22.59%, being among the highest values published so far. In addition, the CBD Zn 2 SnO 4 -based PSMs exhibit high stability, retaining more than 88% of initial efficiency over 1000 h under continuous illumination. This demonstrates that CBD Zn 2 SnO 4 is an appropriate ETL for high-efficiency PSMs and a viable new process for their industrialization.

17 WIND ENERGY↗

Integration of CeO 2 -Based Memristor with Vertically Aligned Nanocomposite Thin Film: Enabling Selective Conductive Filament Formation for High-Performance Electronic Synapses

The CeO 2 -based memristor has attracted significant attention due to its intrinsic resistive switching (RS) properties, large on/off ratio, and great plasticity, making it a promising candidate for artificial synapses. However, significant challenges such as high power consumption and poor device reliability hinder its broad application in neuromorphic microchips. To tackle these issues, in this work, we design a novel bilayer (BL) memristor by integrating a CeO 2 -based memristor with a Co-CeO 2 vertically aligned nanocomposite (VAN) layer and compare it with the single layer (SL) memristor. Preliminary electrical testing reveals that the BL memristor offers a reduced set/reset voltage (~67% lower), a higher on/off ratio (~5 × 10 2 ), enhanced device reliability, and improved device-to-device variation compared to the SL memristor. Insight from COMSOL simulation, coupled with microstructural analysis, provides a comprehensive elucidation on how the VAN layer facilitates the selective conductive filament (CF) formation. Subsequently, the plasticity of the BL memristor is evaluated through long-term potentiation/depression (LTP/LTD), paired-pulse facilitation (PPF), and spike-time-dependent plasticity (STDP). The spiking neural network (SNN) built upon the BL memristor achieves remarkable accuracy (~94%) after only 12 iterations, underscoring its potential for high-performance neural networks.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Photoinduced Electron Transfer Informs on Pathway Coupling in Flavin-Based Electron Bifurcation

Flavin-based electron bifurcation (FBEB) is an enzymatic mechanism that generates extremely high-energy electrons to drive unfavorable chemical reactions. It is utilized by the NADHdependent ferredoxin:NADP + -oxidoreductase (Nfn) enzyme in hyperthermophile Pyrococcus furiosus to bifurcate electrons from NADPH into the coupled low-potential (endergonic) and highpotential (exergonic) pathways. This process enables P. furiosus to live in harsh and uninviting environments. Despite its biological importance, the mechanisms used by Nfn to facilitate exceptional directional control over short-lived, high-energy electrons and to prevent undesired transfer, particularly along the low-potential pathway, are still not well understood. To elucidate how the protein environment contributes to electronic control in the lowpotential pathway, new techniques must be utilized to probe these unstable intermediates. In this study, we have adapted lowtemperature photoexcitation combined with electron paramagnetic resonance (EPR) to accumulate the short-lived intermediate and place it in the context of the other cofactors involved in the low-potential pathway of Nfn. We observed coincident growth of both the radical intermediate and its nearby [4Fe-4S] cluster over 4.5 h of illumination with NADPH at cryogenic temperatures. The photogenerated paramagnetic species were stable in LN 2 storage indefinitely and recombined when warmed to higher temperatures. The results provide insights into the electron transfer steps and cofactor interactions along the low potential pathway, facilitating a more robust mechanistic understanding of the high-energy events of electron bifurcation. Furthermore, through comparison of cryogenic and room temperature experiments, a potential gating step involving the movement of key residues important for the reversibility of electron flow along this pathway is suggested.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Promoting the cleavage of C-O bonds at the interface between a metal oxide cluster and a Co(0001) support

As a first step toward the rational design of Co-based catalysts with a higher activity and selectivity, we determine how one can activate a C-O bond at the interface between a metal oxide cluster and a Co(0001) support. The hypothesis here is that the metal ions in metal oxide clusters on a Co(0001) support enhance the adsorption of CO and weaken the C-O bond strength, which can then facilitate the dissociation of the CO reactant. To test this hypothesis, we developed three computational models of Ti4O8/Co(0001), Zr4O8/Co(0001), and Mn8O8/Co(0001). We quantify the CO adsorption behavior at the interface sites between an oxide cluster and the Co(0001) support as well as the corresponding IR spectra. We correlate the computed CO stretch frequencies with their CO adsorption energies, as well as the CO stretch frequency with the C-O bond length, and related these findings to the changes in the chemical bonding in the bound CO. The interface is the most favorable site for CO adsorption. Adsorption results in an increase of the C-O bond length and a decrease in its vibrational frequency. From a chemical bonding analysis, the bond order in CO at this site drops from 3 (in the gas phase) to 1. This decrease in bond order is a necessary precursor stage for CO dissociation. The experimental measurements of the corresponding FTIR spectra support this point. The favorability of CO adsorption at the interface sites is due to an electron transfer from the metal ion in the metal oxide cluster to the O atom in CO. We establish a linear relationship between C-O bond length and CO frequency and this relationship is found to be independent of the support, type of metal oxide cluster, or the adsorption site.

Fischer-Tropsch Synthesis, Heterogeneous Catalysis↗

Cobalt-Catalyzed Hydrogenation Reactions Enabled by Ligand-Based Storage of Dihydrogen

The use of supporting ligands that can store either protons or electrons has emerged as a powerful strategy in catalysis. While these strategies are potent individually, natural systems mediate remarkable transformations by combining the storage of both protons and electrons in the secondary coordination sphere. As such, there has been recent interest in using this strategy to enable fundamentally different transformations. Furthermore, outsourcing H-atom or hydrogen storage to ancillary ligands can also enable alternative mechanistic pathways and thereby selectivity. Here, we describe the application of this strategy to facilitate radical reactivity in Co-based hydrogenation catalysis. Metalation of previously reported dihydrazonopyrrole ligands with Co results in paramagnetic complexes, which are best described as having Co(II) oxidation states. These complexes catalytically hydrogenate olefins with low catalyst loadings under mild conditions (1 atm H 2 , 23 °C). Mechanistic, spectroscopic, and computational investigations indicate that this system goes through a radical hydrogen-atom transfer (HAT) type pathway that is distinct from classic organometallic mechanisms and is supported by the ability of the ligand to store H 2 . These results show how ancillary ligands can facilitate efficient catalysis, and furthermore how classic organometallic mechanisms for catalysis can be altered by the secondary coordination sphere.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Conversion of CO 2 to Methanol and Ethanol on Pt/CeO x /TiO 2 (110): Enabling Role of Water in C–C Bond Formation

The surface chemistry of alcohol synthesis from CO 2 hydrogenation has been investigated using kinetic testing, ambient pressure x-ray photoelectron spectroscopy (AP-XPS) and DFT calculations over a multicomponent system where Pt and ceria nanoparticles coexisted on a titania template, Pt/CeO x /TiO 2 (110). Due to its high ability to bind and activate CO 2 , not seen for typical Cu-ZnO catalysts, the Pt-CeO x -TiO 2 interface is excellent for the hydrogenation of CO 2 to methanol with some ethanol also being produced (21% selectivity). The results of AP-XPS and DFT calculations indicate that the active state involves a mixture of Ti 4+ /Ti 3+ , Ce 3+ and Pt 0 /Pt + . A fast pathway for the formation of CH 3 O species is only plausible when Ce 3+ and Pt are present. The addition of water to the reaction feed facilitates the first hydrogenation of CO 2 and substantially enhances the surface coverage of C-containing species (CH 3 O, HCOO, CO 3 , CH x ), facilitating the formation of C-C bonds and the production of ethanol (38% selectivity).

36 MATERIALS SCIENCE↗

PdCu Electrocatalysts for Selective Nitrate and Nitrite Reduction to Nitrogen

Electrocatalytic conversion of nitrate in waste can enable efficient waste remediation (NO 3 - to N 2 ) or waste valorization (NO 3 - to NH 4 + ) depending on the selectivity of the catalyst. Palladium and copper electrocatalysts typically exhibit ideal nitrate and nitrite binding properties, allowing for effective destruction of nitrate. However, rational steering of selectivity through material design remains a critical challenge for PdCu electrocatalyst. Here, we use the electrochemical underpotential deposition method to synthesize palladium nanocube electrocataysts with controlled copper surface coverage (e.g., partial and full copper coatings). We then examine the potential for NO 3 - destruction (conversion) and NO 2 - reduction reaction. We identify that partial copper-coated Pd nanocubes not only effectively facilitate the reduction of 95% of NO 3 - but also increase the reduction of NO 2 - to N 2 with 89% selectivity over 20 consecutive cycles (80 h). We also show that under these conditions, the Pd(100) surface facet is exposed. Complete copper-covered Pd nanocubes effectively facilitate the reduction of ~99% of NO 3 - . Complete coverage of copper; however, prevented exposure of Pd(100) surface facet, promoting the selective reduction of NO 2 - to NH 4 + with a 70% selectivity over 20 consecutive cycles (80 h). Density functional theory (DFT) calculations show that NO 3 - and NO 2 - adsorb more strongly on the Cu(100) surface compared to the Pd(100) surface, while the NO* intermediate generated from NO 3 - or NO 2 - reduction adsorbs more strongly on the Pd surface. Furthermore, barrier calculations show that NO* can readily migrate from the Cu domain to the Pd domain and that the N–N coupling barrier on Pd is significantly diminished at high NO* coverage. Together, these results suggest that the high N 2 selectivity observed on the PdCu electrocatalyst is caused by the spillover of NO* from the Cu domains to the Pd domains.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Catalytic Consequences of Hierarchical Pore Architectures within MFI and FAU Zeolites for Polyethylene Conversion

The benefits of hierarchical zeolites for the conversion of bulky molecules like polymeric waste have been reported in the literature; however, the impact of mesopore sizes and connectivities on rates, product selectivities, and catalyst deactivation in the context of plastic upcycling has not been systematically probed. Here, in this study, we synthesized a suite of hierarchical MFI and FAU zeolites via desilication under varying conditions for metal-free polyethylene conversion reactions under batch and flow conditions (473–523 K). Polyethylene (solid) conversion rates (normalized by Bro̷nsted acid site density) were higher on hierarchical than parent microporous MFI regardless of mesopore connectivities, i.e., open or constricted, suggesting that the incorporation of mesopores facilitates diffusion of intermediate products to access medium-pore protons for successive scission events. Furthermore, higher branched:linear gaseous product ratios were produced on hierarchical than parent MFI, since mesopores allow for egress of bulkier molecules without undergoing further secondary events, e.g., isomerization back to linear alkanes/alkenes or beta scission. Solid conversion rates on hierarchical FAU synthesized via desilication with cetyltrimethylammonium bromide (CTABr), however, were not higher than parent FAU, likely because the presence of CTABr facilitates recrystallization of leached species to form composites (hierarchical FAU and ordered mesoporous materials) with more isolated mesopores. The stagnation in rates, despite increased mesopore volumes (>0.22 cm 3 g –1 ), highlights the importance of confinement effects provided by micropores for cleaving C–C bonds at modest reaction conditions. In situ 1 H MAS NMR performed on polyethylene with MFI zeolite show that PE isomerizes (and potentially deconstructs) at temperatures near 450 K, highlighting the role of Bro̷nsted acid sites in activating C–C bonds under mild reaction conditions. Catalyst recyclability studies showed that all catalysts undergo deactivation during plastic upcycling reactions, but to varying extents. Overall, hierarchical materials have better catalyst stability than parent materials, although the differences in stability between hierarchical and parent FAU are smaller than those for MFI. Taken together, these findings demonstrate how rates, selectivities, and catalyst deactivation from plastic upcycling reactions can be controlled via fine-tuning the identity and connectivity of mesopores.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Promotional Effect of ZnO and ZrO 2 in K-Doped Fe Catalysts for CO 2 Hydrogenation to Light Olefins

Promoters play a critical role in tuning the activity and selectivity of Fe catalysts in CO 2 hydrogenation to produce light olefins, which are key building blocks in the petrochemical industry. Herein, by a combined experimental and theoretical approach, we show that high and stable performance of Fe catalysts could be achieved by taking advantage of the promotional effect of both Zn and Zr. Structural characterization indicates that ZnO could improve the dispersion and reducibility of Fe oxides and facilitate the formation of active Fe carbide species, whereas ZrO 2 could stabilize the structure and catalytic performance, especially the selectivity of hydrocarbon products. In situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) experiments suggest that carbonate, bicarbonate, formate, and methoxy are essential intermediates in the CO 2 hydrogenation to hydrocarbon products, including paraffins and olefins. The conversion kinetics of each intermediate species are dependent on the type of promoters as well as the phase structure of the active Fe species. DFT calculations revealed a strong correlation between the formation energy of surface oxygen vacancies and that of Fe carbide species in promoted Fe oxides, in accordance with experimental results. Moreover, the calculated energy profiles of CO 2 hydrogenation over different catalysts indicate that Zn could promote the activation of CO 2 and its transformation to the oxygenate intermediates, while Zr could facilitate the conversion of oxygenates to hydrocarbon precursors. Finally, the discrepancies in the evolution trend of various intermediate species on promoted Fe catalysts in the transient DRIFTS experiments can be rationalized by the differences in energy barriers of elementary or rate limiting steps.

CO2 conversion↗

Ligation of Single-Site Ruthenium within Perovskite Oxides for Efficient Conversion of Thermodynamically Stable Molecules

Ru cation ligation in SrTiO 3 perovskite and their migration to the surface through exsolution are investigated for the dry reforming of methane (DRM), a chemistry that requires activation of two thermodynamically stable molecules, CH 4 and CO 2 . Compared to a supported 1 wt % Ru/SrTiO 3 benchmark, doped and exsolved Ru-SrTiO 3 demonstrate ≥3× higher CH 4 turnover rates (873 K), with isolated, ligated Ru exhibiting higher reactivity. Reactor studies assert that CH 4 and CO 2 activation are both kinetically relevant for CH 4 turnover rates on exsolved Ru-SrTiO 3 , unlike for supported Ru systems, where H-abstraction from CH 4 is the sole kinetically relevant step. As such, exsolved and doped Ru architectures are responsive toward co-reactant activation strategies, with their consequent reaction networks showing marked departures from those established for supported Ru catalysts. In situ spectroscopy and kinetic analyses propose distinct sensitivity toward CO 2 on Ru-SrTiO 3 systems, where higher CH4 turnover rates result from O-assisted C─H bond activation pathways. These pathways occur on paired Ru-oxygen vacancy sites that are inherent to the perovskite structure and are not readily accessible on supported Ru catalysts. Here, CO 2 is activated on oxygen vacancies directly adjacent to Ru active sites, which facilitates CH 4 C─H bond activation through a surface methoxy intermediate. The high reactivity of Ru-SrTiO 3 systems enables stable CH 4 turnover rates at milder reaction temperatures (673 K), conditions under which the supported counterpart, Ru/SrTiO 3 , is inactive. Overall, this work demonstrates that ligation of catalytically active cations in perovskite oxides facilitates site engineering toward atom-efficient activation of thermodynamically stable feedstocks.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Click-Chemistry-Based Free Azide versus Azido Sugar Detection Enables Rapid In Vivo Screening of Glycosynthase Activity

Engineering of carbohydrate-active enzymes such as glycosynthases to enable chemoenzymatic synthesis of bespoke oligosaccharides has been limited by the lack of suitable ultrahigh-throughput screening methods capable of robustly detecting either starting substrates or end-products of the glycosidic bond formation reaction. Currently, there are limited screening methods available for rapid and highly sensitive single-cell-based screening of glycosynthase enzymes employing azido sugars as activated donor glycosyl substrates. Here, we report a fluorescence-based approach employing click-chemistry for the selective detection of glycosyl azides as substrates versus free inorganic azides as reaction products that facilitated an ultrahigh-throughput in vivo single-cell-based assay of glycosynthase activity. This assay was developed based on the distinct differences observed in relative fluorescence intensity of the triazole-containing fluorophore product formed during the click-chemistry reaction of organic glycosyl azides versus inorganic azides. This discovery formed the basis for proof of concept validation of a directed evolution methodology for screening and sorting glycosynthase mutants capable of synthesis of targeted fucosylated oligosaccharides. Our screening approach facilitated fluorescence-activated cell sorting of an error-prone polymerase chain reaction-based mutant library of fucosynthases expressed in Escherichia coli to identify several novel mutants that showed increased activity for ß-fucosyl azide-activated donor sugars toward desired acceptor sugars (e.g., pNP-xylose and lactose). Finally, we discuss avenues for improving this proof of concept in vivo assay method to identify better glycosynthase mutants and further demonstrate the broader applicability of this screening methodology for synthesis of bespoke glycans.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Amine-Assisted Ligand-Exchange Method to Enhance Photovoltaic Parameters in FAPbI3 Nanocrystal Solar Cells

Perovskite colloidal nanocrystals (PeNCs) have exceptional optoelectronic properties and phase stability, making them promising for photovoltaic applications. However, insulating ligands on PeNC surfaces limit the current density and reduce the power conversion efficiency (PCE) in PeNC solar cells (SCs). This study introduces an amine-assisted ligand-exchange (ALE) strategy using 3-phenyl-1-propylamine (3P1P) to effectively remove long ligands from PeNC films. ALE reduced long-chain ligand density without increasing the number of defect states and therefore reduced the exciton-binding energy of FAPbI3 NC films. These changes facilitated exciton dissociation and charge transport in FAPbI3 PeNC SCs. The facilitation of exciton dissociation was due to the increased magnetic dipole interaction between excitons after the ALE process. The use of ALE achieved FAPbI3 PeNC SCs that had an improved short-circuit current density of 17.98 mA/cm2 and a PCE of 15.56% with improved stability after the treatment and negligible hysteresis. This work provides new insight into engineering PeNC films.

amines↗