Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “excited state methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Photoinduced electronic excitations drive polymerization of carbon monoxide: A first-principles study

Under pressure, carbon monoxide (CO) transforms into a polymer that can be recovered to ambient conditions. While this transformation can occur without additional stimuli, experimental observations have shown that laser irradiation can induce a similar transformation at reduced pressure. The resulting polymeric phase, which is metastable under ambient conditions, releases energy through decomposition into more stable configurations. Using time-dependent density functional theory and Born–Oppenheimer molecular dynamics simulations, we investigate the mechanism by which electronic excitation facilitates CO polymerization. Our calculations reveal that electronic excitation enhances carbon–carbon bonding, enabling polymerization at pressures significantly lower than those required by conventional compression methods. In conclusion, these findings suggest that a photo-assisted approach could be employed to synthesize novel, potentially energetic materials under less demanding pressure conditions.

Born-Oppenheimer molecular dynamics↗
DOE OSTI2025

Quantum Emitters Induced by High Pressure and UV Laser Irradiation in Multilayer GaSe

In this work, we report on defect generation in multilayer GaSe through hydrostatic pressure quenching and UV laser irradiation. The Raman line width from the UV 266 nm irradiated sample is much wider than that in pressure-quenched GaSe, corresponding to a wider defect energy distribution range in the former sample than the latter. After quenching from 11.2 GPa, three photoluminescence (PL) peaks from defect states are observed at 657, 681, and 695 nm at a low temperature of 93 K. Defect-related peaks at 649, 694, 750, and 774 nm also appear in low-temperature PL spectra after UV laser irradiation, with a nonmonotonous intensity dependence on irradiation duration. There are common features in defects produced by these two methods: the PL peaks with the lowest energy are sharp, and their PL intensities increase linearly with the excitation laser power and saturate above a certain excitation laser power. These two features are similar to those in defects for single-photon emission (SPE) in other 2D materials at even lower temperatures. Fluorescence lifetime imaging shows distinguished short (2.3 ns) and long (75.6 nm) lifetimes of the 695 nm PL line in pressure-quenched GaSe. The density functional theory predicts defect energy levels related to Se vacancy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

DISTEMA: distance map-based estimation of single protein model accuracy with attentive 2D convolutional neural network

Abstract Background Estimation of the accuracy (quality) of protein structural models is important for both prediction and use of protein structural models. Deep learning methods have been used to integrate protein structure features to predict the quality of protein models. Inter-residue distances are key information for predicting protein’s tertiary structures and therefore have good potentials to predict the quality of protein structural models. However, few methods have been developed to fully take advantage of predicted inter-residue distance maps to estimate the accuracy of a single protein structural model. Result We developed an attentive 2D convolutional neural network (CNN) with channel-wise attention to take only a raw difference map between the inter-residue distance map calculated from a single protein model and the distance map predicted from the protein sequence as input to predict the quality of the model. The network comprises multiple convolutional layers, batch normalization layers, dense layers, and Squeeze-and-Excitation blocks with attention to automatically extract features relevant to protein model quality from the raw input without using any expert-curated features. We evaluated DISTEMA’s capability of selecting the best models for CASP13 targets in terms of ranking loss of GDT-TS score. The ranking loss of DISTEMA is 0.079, lower than several state-of-the-art single-model quality assessment methods. Conclusion This work demonstrates that using raw inter-residue distance information with deep learning can predict the quality of protein structural models reasonably well. DISTEMA is freely at https://github.com/jianlin-cheng/DISTEMA

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Photo-induced electron paramagnetic resonance: A means to identify defects and the defect level throughout the bandgap of ultrawide bandgap semiconductors

Ultrawide bandgap semiconductors (UWBGs) provide great promise for optical devices operating in the near to deep ultraviolet, and recently they have become a viable semiconducting material for high power electronics. From the power grid to electronic vehicles, the intention is to replace massively awkward components with the convenience of a solid state electronic “chip.” Unfortunately, the challenges faced by wide bandgap electronic materials, such as GaN and SiC, increase as the bandgap increases. A point defect, for example, can take on more charge states and energy configurations. This perspective describes a method to investigate the many charge states and their associated transitions—photo-induced electron paramagnetic resonance (photo-EPR) spectroscopy. Although not new to the study of defects in semiconductors, photo-EPR studies can probe the entire ultrawide bandgap given the appropriate light source for excitation. Examples provided here cover specific defects in UWBGs, AlN, and Ga2O3. The discussion also reminds us how the rapid pace of discovery surrounding this newest class of semiconductors is due, in part, to fundamental research studies of the past, some as far back as a century ago and some based on very different materials systems.

Physics↗
DOE OSTI2025

Simultaneous imaging of vibrational, rotational, and electronic wave-packet dynamics in a triatomic molecule

Light-induced molecular dynamics often involve the excitation of several electronic, vibrational, and rotational states. Since the ensuing electronic and nuclear motion determines the pathways and outcomes of photoinduced reactions, our ability to monitor and understand these dynamics is crucial for molecular physics, physical chemistry, and photobiology. However, characterizing this complex motion represents a significant challenge when different degrees of freedom are strongly coupled. In this Letter, we demonstrate how the interplay between vibrational, rotational, and electronic degrees of freedom governs the evolution of molecular wave packets in the low-lying states of strong-field-ionized sulfur dioxide. Using time-resolved Coulomb explosion imaging (CEI) and quantum mechanical wave packet simulations, we directly map the bending vibrations of the molecule, show how the vibrational wave packet is influenced by molecular alignment, and elucidate the consequences of nuclear motion for the coupling between the two lowest electronic states of the cation. Furthermore, our results demonstrate that multicoincident CEI can be an efficient experimental tool for characterizing coupled electronic and nuclear motion in polyatomic molecules.

Atomic & molecular processes in external fields↗
DOE OSTI2022

Imaging Wavepackets in Real-Space & Disentangling Ultrafast Solvation Dynamics with High-Energy Ultrafast X-ray Scattering

The microscopic information of solute and solute-solvent motions can be measured using ultrafast diffuse x-ray scattering, and compared to molecular dynamics simulations, as demonstrated in studies of solvated molecular systems done in X-ray free-electron lasers. However, for the typical photon energies used in these experiments, the photon momentum transfer range was limited to lower Q values where the signals arising from different parts of the studied system overlap significantly. Recently, this limitation was greatly alleviated by extending the photon energy at the Linac Coherent Light-Source (LCLS), significantly increasing the accessible momentum transfer range. This improvement is transformative for ultrafast diffuse x-ray scattering measurements, enabling for the first time to disentangle the solute scattering difference signal, that persists to higher Q values, from the bulk solvent and solute-solvent cross-terms difference signals. In addition, it enhances the prediction ability of modeling and simulation methods such as the hybrid QM/MM approach. The extended Q range also opens the way to resolve in real-space details regarding coherent wavepackets motions beyond their center-of-mass positions. Here, we present the first results on high-energy (18keV) diffuse x-ray scattering in solution, demonstrating high fidelity time-resolved scattering and analysis of the photoexcited model photocatalysts PtPOP ([Pt2(POP)4]4-), and IrDimen ([Ir2(dimen)4]2+) in several solvents. These complexes provide ideal systems for demonstrating the ability of high-Q ultrafast scattering and QM/MM simulations to decompose ultrafast solvation dynamics into specific changes in the solute-solvent pair distribution function with a particular focus on how electronically excited states change the interaction between the solvent and photo-catalytically active metal sites. We introduce an approach to further utilize the high-energy capability and demonstrate a single-shot ultra-wide-angle X-ray Scattering modality using two perpendicular detectors, spanning a scattering angle range of more than 100 degrees, allowing to extend the accessible momentum transfer range up to Q~14 Å-1. We develop a model-free method to invert the x-ray scattering signals and enable the recovery of multiple pair-density motions that happen simultaneously, allowing us to directly measure in real-space nuclear wavepacket motions. . [1] Natan, Adi. "Real-Space Inversion and Super-Resolution of Ultrafast X-ray Scattering using Natural Scattering Kernels." arXiv preprint arXiv:2107.05576 (2021)

Natan, Adi↗
DOE OSTI2024

Optimizing Transmission of Acoustic Signals to Monitor Internal Conditions of Canisters for Dry Storage of Commercial Spent Nuclear Fuel

Safe storage of spent nuclear fuel (SNF) is critical to the nuclear fuel cycle and the future of nuclear energy. In the United States, SNF is stored primarily via two methods regulated by the U.S. Nuclear Regulatory Commission: wet storage in SNF pools and dry storage in dry cask storage systems (DCSSs). After about five years of cooling in spent fuel pools, the fuel assemblies are transferred into DCSSs, and the systems are filled with helium and sealed by welding. Deterioration of conditions inside of a DCSS is reflected in changes in the internal gas properties; this motivates the development of acoustic techniques to monitor internal gas properties, over extended storage periods, using sensors mounted on the exterior of the storage packages. However, a major challenge in collecting acoustic signals is the impedance mismatch between the steel canister shell and the gas. Only a small fraction of the ultrasonic signal can be transmitted through the gas medium. This paper documents experimental studies conducted on a full-scale canister mock-up to capture the gas-borne signals. Damping materials were pasted on the outside, and blocking and unblocking tests were conducted to identify the gas-borne signal. The results show that the excitation frequency plays an important role in maximizing the gas-borne signals. The gas-borne signal was successfully detected at around the theoretical time-of-flight. A high signal-to-noise ratio was achieved in the measurements. Next, the acoustic impedance matching layers were introduced, and the gas signal was drastically improved compared with that using no AIM layers.

Spent nuclear fuel (SNF), Canisters, Internal cond↗
DOE OSTI2024

First-Principles Simulation of Beam-Induced Processes Underlying Atomic Manipulation in Electron Microscopes

The development of experimental methods and apparatuses capable of promoting atomically precise material manipulations holds great promise for realizing the ultimate limit of feature miniaturization in materials and devices. The ability to modify materials atom by atom is anticipated to usher in new technologies in areas as diverse as separation science, medicine, and quantum information science. Historically, scanning probe-based techniques have been the most prominent approaches in this space. However, these methods are best suited for the manipulation of surface-exposed regions of materials, as the strong perturbations required for bond scission are delivered most effectively to atoms in the near-proximity to the scanning probe. In contrast, convergent electron beams with energies tuned slightly below the threshold for inducing irreversible knock-on damage have recently been employed (within scanning transmission electron microscopy) to promote atomic-scale bond rearrangements in various beam-stable solids. Currently, however, the efficiency and selectivity of beam-induced atomic manipulation processes with focused electron beams are such that long irradiation times are required to induce a desired atomic rearrangement. With a better understanding of the underlying physics dictating the outcome of a given irradiation event, methods can be devised to improve the efficiency of these techniques so that their promise can be fully realized through widespread adoption.To this end, this Account details our recent efforts to develop and apply tractable first-principles simulation approaches for studying the response of materials to electric beam-like external electric potentials applied in real space. We briefly review the concepts and capabilities in the area of atomically precise materials manipulation and review the early demonstrations of accomplishments in this area, focusing on studies using scanned convergent electron beam probes in particular. We expound upon the depth of the challenge and identify critical shortcomings of theoretical methods that have previously been employed in the simulation of beam-induced processes. We then describe the computational methods that we have generalized from the concepts and tools most commonly applied to the study of molecular photochemistry and how our adaptations of these methods can be employed to capture the relevant dynamical phenomena for beam-induced processes ranging from the initial electron scattering to the ensuing multistate reactions. Here, we contextualize these methods within the current state of the art in this area, which has historically focused primarily on the simulation of inelastic image formation in the electron microscope for the purpose of interpreting the results of quantitative electron microscopy experiments. We demonstrate that the spatial distribution of state-specific excitation rates due to the presence of an external (probe) electric charge is inhomogeneous, such that irradiation at particular locations in materials can favor specific electronic transitions (and disallow others). In addition to the potential for excited-state reaction pathways to be accessed through the initial inelastic scattering of the tightly focused electron beam from the targeted atoms, we also identify favorable conditions for the electronically nonadiabatic evolution of the highly vibrationally excited system to open complex multistate reaction pathways. Implications of the early results for understanding the mechanisms and potential routes to improved efficiency and selectivity in beam-induced reactions are discussed. We conclude with a summary of the current state of theory and modeling capabilities in this area and provide our perspective on future directions for theoretical and experimental developments that we view as crucial to advancing the use of convergent electron beams in mode-specific, atomically precise platforms for direct-write materials modifications.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Capturing many-body correlation effects with quantum and classical computing

Theoretical descriptions of excited states of molecular systems in high-energy regimes are crucial for supporting and driving many experimental efforts at light source facilities. However, capturing their complicated correlation effects requires formalisms that provide a hierarchical infrastructure of approximations. These approximations lead to an increased overhead in classical computing methods and, therefore, decisions regarding the ranking of approximations and the quality of results must be made on purely numerical grounds. The emergence of quantum computing methods has the potential to change this situation. Here, in this study, we demonstrate the efficiency of the quantum phase estimator (QPE) in identifying core-level states relevant to x-ray photoelectron spectroscopy. We compare and validate the QPE predictions with exact diagonalization and real-time equation-of-motion coupled-cluster formulations, which are some of the most accurate methods for states dominated by collective correlation effects.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2021

Nonequilibrium optical response of a one-dimensional Mott insulator

We define, compute, and analyze the nonequilibrium differential optical conductivity of the one-dimensional extended Hubbard model at half-filling after applying a pump pulse, using the time-dependent density matrix renormalization group method. The melting of the Mott insulator is accompanied by a suppression of the local magnetic moment and ensuing photogeneration of doublon-holon pairs. The differential optical conductivity reveals (i) mid-gap states related to parity-forbidden optical states and (ii) strong renormalization and hybridization of the excitonic resonance and the absorption band, yielding a Fano resonance. We offer evidence and interpret such a resonance as a signature of nonequilibrium optical excitations resembling excitonic strings, (bi)excitons, and unbound doublon-holon pairs, depending on the magnitude of the intersite Coulomb repulsion. We discuss our results in the context of pump and probe spectroscopy experiments on organic Mott insulators.

1-dimensional systems↗
DOE OSTI2021

Understanding flavin electronic structure and spectra

Abstract Flavins have emerged as central to electron bifurcation, signaling, and countless enzymatic reactions. In bifurcation, two electrons acquired as a pair are separated in coupled transfers wherein the energy of both is concentrated on one of the two. This enables organisms to drive demanding reactions based on abundant low‐grade chemical fuel. To enable incorporation of this and other flavin capabilities into designed materials and devices, it is essential to understand fundamental principles of flavin electronic structure that make flavins so reactive and tunable by interactions with protein. Emerging computational tools can now replicate spectra of flavins and are gaining capacity to explain reactivity at atomistic resolution, based on electronic structures. Such fundamental understanding can moreover be transferrable to other chemical systems. A variety of computational innovations have been critical in reproducing experimental properties of flavins including their electronic spectra, vibrational signatures, and nuclear magnetic resonance (NMR) chemical shifts. A computational toolbox for understanding flavin reactivity moreover must be able to treat all five oxidation and protonation states, in addition to excited states that participate in flavoprotein's light‐driven reactions. Therefore, we compare emerging hybrid strategies and their successes in replicating effects of hydrogen bonding, the surrounding dielectric, and local electrostatics. These contribute to the protein's ability to modulate flavin reactivity, so we conclude with a survey of methods for incorporating the effects of the protein residues explicitly, as well as local dynamics. Computation is poised to elucidate the factors that affect a bound flavin's ability to mediate stunningly diverse reactions, and make life possible. This article is categorized under: Structure and Mechanism > Computational Biochemistry and Biophysics Electronic Structure Theory > Combined QM/MM Methods Theoretical and Physical Chemistry > Spectroscopy

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Transition-Metal-Related Quantum Emitters in Wurtzite AlN and GaN

Transition-metal centers exhibit a paramagnetic ground state in wide-bandgap semiconductors and are promising for nanophotonics and quantum information processing. Specifically, there is a growing interest in discovering prominent paramagnetic spin defects that can be manipulated using optical methods. Here, we investigate the electronic structure and magneto-optical properties of Cr and Mn substitutional centers in wurtzite AlN and GaN. We use state-of-the-art hybrid density functional theory calculations to determine level structure, stability, optical signatures, and magnetic properties of these centers. The excitation energies are calculated using the constrained occupation approach and rigorously verified with the complete active space configuration interaction approach. Our simulations of the photoluminescence spectra indicate that $Cr$$^{1+}_{Al}$ in AlN and $Cr$$^{1+}_{Ga}$ in GaN are responsible for the observed narrow quantum emission near 1.2 eV. We compute the zero-field splitting (ZFS) parameters and outline an optical spin polarization protocol for $Cr$$^{1+}_{Al}$ and $Cr$$^{1+}_{Ga}$. Our results demonstrate that these centers are promising candidates for spin qubits.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Finite-size subthermal regime in disordered SU ( N ) -symmetric Heisenberg chains

SU⁡(N) symmetry is incompatible with the many-body localized (MBL) phase, even when strong disorder is present. However, recent studies have shown that finite-size SU⁡(2) systems exhibit nonergodic, subthermal behavior, characterized by the breakdown of the eigenstate thermalization hypothesis, and by the excited eigenstates entanglement entropy that is intermediate between area and volume law. In this paper, we extend previous studies of the SU⁡(2)-symmetric disordered Heisenberg model to larger systems, using the time-dependent density matrix renormalization group (tDMRG) method. We simulate quench dynamics from weakly entangled initial states up to long times, finding robust subthermal behavior at stronger disorder. Although we find an increased tendency towards thermalization at larger system sizes, the subthermal regime persists at intermediate time scales, nevertheless, and therefore should be accessible experimentally. At weaker disorder, we observe signatures of thermalization; however, entanglement entropy exhibits slow sublinear growth, in contrast to conventional thermalizing systems. Furthermore, we study dynamics of the SU⁡(3)-symmetric disordered Heisenberg model. Similarly, strong disorder drives the system into subthermal regime, albeit thermalizing phase is broader compared to the SU⁡(2) case. Finally, our findings demonstrate the robustness of the subthermal regime in spin chains with non-Abelian continuous symmetry, and are consistent with eventual thermalization at large system sizes and long time scales, suggested by previous studies.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Straintronics with single-layer MoS 2 : A quantum Monte Carlo study

Using state-of-the-art quantum Monte Carlo (QMC) methods, we study straintronic properties of a single MoS 2 monolayer. 2D MoS 2 is a quintessential straintronic material for which many experiments have been performed. First, we determine the equilibrium atomic structure which is not known experimentally and is strictly needed to correctly determine the straintronic properties. That enables us to precisely analyze the quasiparticle band gaps for any applied biaxial strain, which we describe by a bivariate paraboloid function of lattice constant and internal structural parameter. Using the fixed-node QMC calculations fitted by analytical formulas, we localize the following excited state crossings between the direct, K → K , and indirect Γ → X and K → K /2 excitations. Based on this highly accurate many-body treatment, we predict a gauge factor of 136 meV/% for the K → K transition and a fairly narrow window of ≈ 2.8 % from compressive to mildly tensile strains, accounting for only ≈ 0.3 eV band gap change maintaining the direct character of the gap. Consequently, we suggest that, compared to other 2D materials, such as phosphorene, there is only a limited straintronic tuneability in this material often studied for its straintronic properties. QMC results are compared to results of standard DFT modeling, which reveal insights into the corresponding inaccuracies and therefore open a window for educated use of rapid DFT approaches. Published by the American Physical Society 2024

Huang, Y.↗
DOE OSTI2023

Accelerating Quantum Materials Development with Advances in Transmission Electron Microscopy

Quantum materials are driving a technology revolution in sensing, communication, and computing, while simultaneously testing many core theories of the past century. Materials such as topological insulators, complex oxides, superconductors, quantum dots, color center-hosting semiconductors, and other types of strongly correlated materials can exhibit exotic properties such as edge conductivity, multiferroicity, magnetoresistance, superconductivity, single photon emission, and optical-spin locking. These emergent properties arise and depend strongly on the material’s detailed atomic-scale structure, including atomic defects, dopants, and lattice stacking. In this review, we describe how progress in the field of electron microscopy (EM), including in situ and in operando EM, can accelerate advances in quantum materials and quantum excitations. We begin by describing fundamental EM principles and operation modes. We then discuss various EM methods such as (i) EM spectroscopies, including electron energy loss spectroscopy (EELS), cathodoluminescence (CL), and electron energy gain spectroscopy (EEGS); (ii) four-dimensional scanning transmission electron microscopy (4D-STEM); (iii) dynamic and ultrafast EM (UEM); (iv) complementary ultrafast spectroscopies (UED, XFEL); and (v) atomic electron tomography (AET). We describe how these methods could inform structure–function relations in quantum materials down to the picometer scale and femtosecond time resolution, and how they enable precision positioning of atomic defects and high-resolution manipulation of quantum materials. For each method, we also describe existing limitations to solve open quantum mechanical questions, and how they might be addressed to accelerate progress. Among numerous notable results, our review highlights how EM is enabling identification of the 3D structure of quantum defects; measuring reversible and metastable dynamics of quantum excitations; mapping exciton states and single photon emission; measuring nanoscale thermal transport and coupled excitation dynamics; and measuring the internal electric field and charge density distribution of quantum heterointerfaces- all at the quantum materials’ intrinsic atomic and near atomic-length scale. Finally, we conclude by describing open challenges for the future, including achieving stable sample holders for ultralow temperature (below 10K) atomic-scale spatial resolution, stable spectrometers that enable meV energy resolution, and high-resolution, dynamic mapping of magnetic and spin fields. With atomic manipulation and ultrafast characterization enabled by EM, quantum materials will be poised to integrate into many of the sustainable and energy-efficient technologies needed for the 21st century.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Hole Relaxation Bottlenecks in CdSe/CdTe/CdSe Lateral Heterostructures Lead to Bicolor Emission

Concentric lateral CdSe/CdTe/CdSe heterostructures show bicolor photoluminescence from both a red charge transfer band of the CdSe/CdTe interface and a green fluorescence from CdSe. Further, this work uses visible and near-infrared transient spectroscopy measurements to demonstrate that the deviation from Kasha's rule arises from a hole relaxation bottleneck from CdSe to CdTe. Hole transfer can take up to 1 ns, which permits radiative relaxation of excitons remaining in CdSe. Simulations indicate that the hole relaxation bottleneck arises due to the sparse density of states and poor spatial overlap of hole states at energies near the CdSe band edge. The divergent kinetics of transfer for band edge and hot holes is exploited to vary the ratio of green and red photoluminescence with excitation wavelength, providing another knob to control emission color. These findings support the use of lateral heterojunctions as a method for slowing carrier relaxation in two-dimensional materials.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2023

Atomic autoionization in the photo-dissociation of super-excited deuterated water molecules fragmenting into D + + O + + D

We present the relaxation dynamics of deuterated water molecules via autoionization, initiated by the absorption of a 61 eV photon, producing the very rare D + + O + + D breakup channel. We employ the COLd target recoil ion momentum spectroscopy method to measure the 3D momenta of the ionic fragments and emitted electrons from the dissociating molecule in coincidence. We interpret the results using the potential energy surfaces extracted from multi-reference configuration interaction calculations. The measured particle energy distributions can be related to a super-excited monocationic state located above the double ionization threshold of D 2 O. The autoionized electron energy shows a sharp distribution centered around 0.5 eV, which is a signature of the atomic oxygen autoionization occurring in the direct and sequential dissociation processes of D 2 O + * at a large internuclear distance. In this way, an O + radical fragment and a low-energy electron are created, both of which can trigger secondary reactions in their environment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Lifetime measurements of excited states in 15 O

The CNO cycle is the main energy source in stars more massive than our Sun, it defines the energy production and the cycle time that lead to the lifetime of massive stars, and it is an important tool for the determination of the age of globular clusters. One of the largest uncertainties in the CNO chain of reactions comes from the uncertainty in the 14 N(p,γ) 15 O reaction rate. This uncertainty arises predominantly from the uncertainty in the lifetime of the subthreshold state in 15 O at E x = 6792 keV. Previous measurements of this state's lifetime are significantly discrepant. Here, we report on a new lifetime measurement of this state, as well as the excited states in 15 O at E x = 5181 keV and E x = 6172 keV, populated via the 14 N(p,γ) 15 O reaction at proton energies of E p = 1020 keV and E p = 1570 keV. Furthermore, the lifetimes have been determined with the Doppler-Shift Attenuation Method (DSAM) with three separate, nitrogen-implanted targets with Mo, Ta, and W backing. We obtained lifetimes from the weighted average of the three measurements, allowing us to account for systematic differences between the backing materials. For the 6792 keV state, we obtained a τ = 0.6 ± 0.4 fs. To provide cross-validation of our method, we measured the known lifetimes of the states at 5181 and 6172 keV to be τ = 7.5 ± 3.0 and τ = 0.7 ± 0.5 fs, respectively, in good agreement with previous measurements.

6 ≤ A ≤ 19↗