SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Gold-platinum solar cell contact is developed which does not exhibit chemical reactivity of titanium or porosity of silver. This contact offers excellent ohmic characteristics and stability in humid air.
Experimental and analytical investigations of the vibratory behavior of ring-stiffened truncated-cone shells are described. Vibration tests were conducted on 60 deg conical shells having up to four ring stiffeners and for free-free and clamped-free edge constraints and 9 deg conical shells, for two thicknesses, each with two angle rings and for free-free, free-clamped, and clamped-clamped edge constraints. The analytical method is based on linear thin shell theory, employing the Rayleigh-Ritz method. Discrete rings are represented as composed of one or more segments, each of which is a short truncated-cone shell of uniform thickness. Equations of constraint are used to join a ring and shell along a circumferential line connection. Excellent agreement was obtained for comparisons of experimental and calculated frequencies.
A computer program was developed to do the calculations for two-dimensional or axisymmetric configurations from low speeds to hypersonic speeds with arbitrary streamwise pressure, temperature, and Mach number distributions. Options are provided for obtaining initial conditions either from experimental information or from a theoretical similarity solution. The transition region can be described either by an arbitrary distribution of intermittency or by a function based on Emmons' probability theory. Correlations were developed for use in estimating the parameters of the theoretical intermittency function. Correlations obtained from other sources are used for estimating the transition point. Comparisons were made between calculated and measured boundary layer quantities for laminar, transitional, and turbulent flows on flat plates, cones, cone flares, and a waisted body of revolution. Excellent agreement was obtained between the present theory and two other theories based on the method of finite differences. The intermittency required to reproduce some experimental heat transfer results in hypersonic flow was found to be quite different from the theoretical function. It is suggested that the simple probability theory of Emmons may not be valid for representing the intermittency of hypersonic transitional boundary layers and that the program could be useful as a tool for detailed study of the intermittency of the transition region.
Excellent space photography of parts of the southwestern United States and northwestern Mexico was obtained during the unmanned Apollo 6 spaceflight. Two features of this photography made it useful for geologic interpretations: its vertical stereocoverage and its exposure under a relatively low angle of solar illumination through an unusually cloud-free and clear atmosphere. The structural patterns, which were topographically enhanced by the longer shadows, were annotated on the photographs, in order to analyze their trends with respect to the continental tectonic framework, and to attempt to correlate the pattern with known copper or other base metal deposits. The annotated fracture patterns showed the regional trends and their distribution. The area studied was a 100- to 105-mile swath of terrain covering a total land area of approximately 60,000 square statute miles. The coverage began from a point centered on Punta Colnett on the Pacific coast of Baja California and extended to the Sacramento Mountains of New Mexico and west Texas.
To obtain information about in-place lunar rocks and soil, a closeup stereoscopic camera capable of photographing small scale surface features was used at the Apollo 12 landing site on the Ocean of Storms. Fifteen stereoscopic photograph pairs were obtained. The stereoscopic pairs were of excellent quality and showed the in-place lunar material in detail. The photographs were analyzed and the results compared with the results of the Apollo 12 core sample analysis and other investigations. Significant information about the physical composition and genesis of the lunar soil at the Apollo 12 landing site was obtained. The cohesive soil on the Ocean of Storms probably results from repetitive bombardment of basalt flows by meteorites over long periods of time.
The Darwin model of electromagnetic interaction is presented as a self-consistent theory, and is shown to be an excellent approximation to the Maxwell theory for slow electromagnetic waves. Since the fast waves of the Maxwell theory are absent, it is convenient for use in the computer simulation of the electromagnetic dynamics of nonrelativistic plasma.
Research to determine the optimum time or season for obtaining imagery to identify and map soil limitations was conducted in the proposed Oahe irrigation project area in South Dakota. The optimum time for securing photographs or imagery is when the soil surface patterns are most apparent. For cultivated areas similar to the study area, May is the optimum time. The density slicing analysis of the May image provided additional and more accurate information than did the existing soil map. The soil boundaries were more accurately located. The use of a density analysis system for an operational soil survey has not been tested, but is obviously dependent upon securing excellent photographs for interpretation. The colors or densities of photographs will have to be corrected for sun angle effects, vignetting effects, and processing to have maximum effectiveness for mapping soil limitations. Rangeland sites were established in Bennett County, South Dakota to determine the usefulness of ERTS imagery. Imagery from these areas was interpreted for land use and drainage patterns.
Examination is made of the influence of temperature on the strainrange partitioning approach to creep-fatigue. Results for Cr-Mo steel and Type 316 stainless steel show the four partitioned strainrange-life relationships to be temperature insensitive to within a factor of two on cyclic life. Monotonic creep and tensile ductilities were also found to be temperature insensitive to within a factor of two. The approach provides bounds on cyclic life that can be readily established for any type of inelastic strain cycle. Continuous strain cycling results obtained over a broad range of high temperatures and frequencies are in excellent agreement with bounds provided by the approach. The observed transition from one bound to the other is also in good agreement with the approach.
Observations of the Sun, Moon, Mercury, Venus, Mars, Jupiter, and Saturn were made at 3.1 mm and 8.6 mm wavelengths with a 16-foot radio telescope between March and August, 1971. Absolute brightness temperature data are given. All errors are one standard deviation and include uncertainties in antenna gain calibration. The solar and lunar temperatures are in excellent agreement with published observations. The planetary measurements at 3.1 mm are consistently higher than previous results. The implications of higher temperatures with respect to existing atmospheric and surface models are discussed.
A study was conducted to correlate Apollo ablation and thermal response flight data using advanced state-of-the-art analytical procedures. The agreement between flight data and predictions is consistently excellent for in-depth temperature distributions, char density profiles, and surface ablation, thus validating the analytical procedures.
A discrete capacitance liquid level system developed is specifically for slush hydrogen, but applicable to LOX, LN2, LH2, and RP1 without modification is described. The signal processing portion of the system is compatible with conventional liquid level sensors. Compatibility with slush hydrogen was achieved by designing the sensor with adequate spacing, while retaining the electrical characteristics of conventional sensors. Tests indicate excellent stability of the system over a temperature range of -20 C to 70 C for the circuit and to cryogenic temperatures of the sensor. The sensor was tested up to 40 g's rms random vibration with no damage to the sensor. Operation with 305 m of cable between the sensor and signal processor was demonstrated. It is concluded that this design is more than adequate for most flight and ground applications.
The Apollo 15 lunar module (LM) landed on the mare surface of Palus Putredinis on the eastern edge of the Imbrium Basin. The site is between the Apennine Mountain front and Hadley Rille. The objectives of the mission, in order of decreasing priority, were description and sampling of three major geologic features-the Apennine Front, Hadley Rille, and the mare. The greater number of periods of extravehicular activity (EVA) and the mobility provided by the lunar roving vehicle (ROVER) allowed much more geologic information to be obtained from a much larger area than those explored by previous Apollo crews. A total of 5 hours was spent at traverse station stops, and the astronauts transmitted excellent descriptions of the lunar surface while in transit between stations.
It was found that large portions of the military handling qualities specification are directly applicable. However a number of additional and substitute criteria are recommended for areas not covered or inadequately covered in the military specification. Supporting pilot/vehicle analyses and simulation experiments were conducted and are described. Results are also presented of analytical and simulator evaluations of three specific interim Orbiter designs which provided a test of the proposed handling qualities criteria. The correlations between the analytical and experimental evaluations were generally excellent.
A mathematical model is presented for the description of axisymmetric laminar-jet diffusion flames. The analysis includes the effects of inertia, viscosity, diffusion, gravity and combustion. These mechanisms are coupled in a boundary layer type formulation and solutions are obtained by an explicit finite difference technique. A dimensional analysis shows that the maximum flame width radius, velocity and thermodynamic state characterize the flame structure. Comparisons with experimental data showed excellent agreement for normal gravity flames and fair agreement for steady state low Reynolds number zero gravity flames. Kinetics effects and radiation are shown to be the primary mechanisms responsible for this discrepancy. Additional factors are discussed including elipticity and transient effects.
Irradiation-induced defects in silicon, using low temperature photoluminescence as a probe of defect properties were investigated. The goal of this research was to gain new understanding of defects which degrade solar cell characteristics in a radiation environment. In this regard, an important aspect of this program was a study of radiation damage and annealing in lithium doped silicon, which is useful in reducing solar cell degradation. Luminescence was used to study defects because this property reveals electron transitions through a number of defect energy levels at any given annealing stage; the luminescence spectra give excellent resolution of many defect energy levels, and these measurements can be used to give defect symmetry in the lattice, impurity dependence, and annealing properties.
The NUGAM2 code predicts forward and backward angular energy differential and integrated distributions for gamma photons and fluorescent radiation emerging from finite laminar transport media. It determines buildup and albedo data for scientific research and engineering purposes; it also predicts the emission characteristics of finite radioisotope sources. The results are shown to be in very good agreement with available published data. The code predicts data for many situations in which no published data is available in the energy range up to 5 MeV. The NUGAM3 code predicts the pulse height response of inorganic (NaI and CsI) scintillation detectors to gamma photons. Because it allows the scintillator to be clad and mounted on a photomultiplier as in the experimental or industrial application, it is a more practical and thus useful code than others previously reported. Results are in excellent agreement with published Monte Carlo and experimental data in the energy range up to 4.5 MeV.
A continuous flexible body nonlinear dynamics computer program is used for simulating the spinning mode performance of a spacecraft under applied control torques. The program takes into account the continuous flexible nature of the antennas by representing deflections in terms of shape functions and integrated the spatial dependence in the formulation of the equations of motion. Comparison of RAE flight data on roll, pitch, and yaw with predictions of the computer program in the gravity gradient mode show fair to good agreement in roll and pitch and excellent agreement in the yaw angle.
The ATS 5 millimeter wave propagation experiment determines long- and short-term attenuation statistics of operational millimeter wavelength earthspace links as functions of defined meteorological conditions. A preliminary analysis of results with 15 GHz downlink and 32 GHz uplink frequency bands indicates that both frequency bands exhibit an excellent potential for utilization in reliable high data rate earth-space communications systems.