Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “error performance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Effects of display format on pilot describing function and remnant

As part of a program to develop a comprehensive theory of manual control displays, six display formats were used by three instrument-rated pilots to regulate against random disturbances with a controlled element under both foveal and 10 deg parafoveal viewing conditions. The six display formats were: CRT line, CRT thermometer bar, 14-bar quantized on a CRT, a rotary dial and pointer, and two variations of a moving scale tape-drive. All were scaled to equivalent movement and apparent brightness. Measures included overall performance, describing functions, error remnant power spectra, critical instability scores, and subjective display ratings. The results show that the main effect of display format is on the loop closure properties. Less desirable displays induce lower bandwidth closures with consequent effects on the closed-loop remnant and performance.

Jex, H. R.↗
NASA NTRS1991

Harmonic drive gear error: Characterization and compensation for precision pointing and tracking

Imperfections and geometry effects in harmonic drive gear reducers cause a cyclic gear error, which at a systems level, results in high frequency torque fluctuations. To address this problem, gear error testing was performed on a wide variety of sizes and types of harmonic drives. It was found that although all harmonic drives exhibit a significant first harmonic, higher harmonics varied greatly with each unit. From life tests, small changes were found in harmonic content, phase shift, and error magnitude (on the order of .008 deg peak-to-peak maximum) occurred for drives with many millions of degrees of output travel. Temperature variations also influenced gear error. Over a spread of approximately 56 C (100 F), the error varied in magnitude approximately 20 percent but changes in a repeatable and predictable manner. Concentricity and parallelness tests of harmonic drive parts resulted in showing alignment influence gear error amplitude. Tests on dedoidaled harmonic drives showed little effect on gear error; surprisingly, in one case for a small drive, gear error actually improved. Electronic compensation of gear error in harmonic drives was shown to be substantially effective for units that are first harmonic dominant.

Nye, Ted W.↗
NASA NTRS1989

Multiple boundary condition testing error analysis

Techniques for interpreting data from multiple-boundary-condition (MBC) ground tests of large space structures are developed analytically and demonstrated. The use of MBC testing to validate structures too large to stand alone on the ground is explained; the generalized least-squares mass and stiffness curve-fitting methods typically applied to MBC test data are reviewed; and a detailed error analysis is performed. Consideration is given to sensitivity coefficients, covariance-matrix theory, the correspondence between test and analysis modes, constraints and step sizes, convergence criteria, and factor-analysis theory. Numerical results for a simple beam problem are presented in tables and briefly characterized. The improved error-updating capabilities of MBC testing are confirmed, and it is concluded that reasonably accurate results can be obtained using a diagonal covariance matrix.

Glaser, R. J.↗
NASA NTRS1977

Monopulse receiver

A time division multiplexing and a quadraphase combining dual channel system were analyzed, designed, and tested. Analyses performed include the following: (1) boresight error as a function of the error channel bandwidth; (2) error channel interference with the sum channel functions; (3) threshold performance; and (4) error channel crosstalk, linearity, and drift as a function of signal level, Doppler, and environment. Test results indicate that the time division multiplexing system meets the design goals of the program. However, careful selection and alignment of all gain controlled amplifiers are required along with temperature compensation of the angle channel gain. The quadraphase system crosstalk performance is comparatively poor (-15 dB) with respect to the -30 dB requirements and this consequently affects gain tracking performance. Gain tracking was found to be + or - 20 percent rather than the + or - 5 percent specification. Data for the two systems is compared and recommendations are presented.

Source record↗
NASA NTRS1984

Performance of a dedicated VLBI system for TDRSS navigation

Results of a covariance study to evaluate the performance of a proposed Very Long Baseline Interferometric (VLBI) system for TDRSS orbit determination (OD) are presented. This dedicated VLBI system consists of 4 one meter antennas for each TDRS positioned on orthogonal 6000 km baselines and uses a GPS signal for clock synchronization and calibration of measurement error sources. The performance of the VLBI system is compared with the current BRT system for support of TDRSS navigation. The criteria for evaluating the system performance is the TDRSS OD accuracy and the resulting navigation accuracy for two typical TDRSS users represented by a TOPEX type orbit and a Space Shuttle orbit. Based on the anticipated characteristics of a 1990 era VLBI system a factor of 20 improvement can be expected in the TDRSS OD accuracy. This translates into accuracy improvements ranging from factors of 3 to 10 for typical TDRSS users.

Ellis, J.↗
NASA NTRS1991

Geoscience Laser Ranging System design and performance predictions

The Geoscience Laser System (GLRS) will be a high-precision distance-measuring instrument planned for deployment on the EOS-B platform. Its primary objectives are to perform ranging measurements to ground targets to monitor crustal deformation and tectonic plate motions, and nadir-looking altimetry to determine ice sheet thicknesses, surface topography, and vertical profiles of clouds and aerosols. The system uses a mode-locked, 3-color Nd:YAG laser source, a Microchannel Plate-PMT for absolute time-of-flight (TOF) measurement (at 532 nm), a streak camera for TOF 2-color dispersion measurement (532 nm and 355 nm), and a Si avalanche photodiode for altimeter waveform detection (1064 nm). The performance goals are to make ranging measurements to ground targets with about 1 cm accuracy, and altimetry height measurements over ice with 10 cm accuracy. This paper presents an overview of the design concept developed during a phase B study. System engineering issues and trade studies are discussed, with particular attention to error budgets and performance predictions.

Anderson, Kent L.↗
NASA NTRS2005

Cognition in Space Workshop: Metrics and Models - 1

"Cognition in Space Workshop I: Metrics and Models" was the first in a series of workshops sponsored by NASA to develop an integrated research and development plan supporting human cognition in space exploration. The workshop was held in Chandler, Arizona, October 25-27, 2004. The participants represented academia, government agencies, and medical centers. This workshop addressed the following goal of the NASA Human System Integration Program for Exploration: to develop a program to manage risks due to human performance and human error, specifically ones tied to cognition. Risks range from catastrophic error to degradation of efficiency and failure to accomplish mission goals. Cognition itself includes memory, decision making, initiation of motor responses, sensation, and perception. Four subgoals were also defined at the workshop as follows: (1) NASA needs to develop a human-centered design process that incorporates standards for human cognition, human performance, and assessment of human interfaces; (2) NASA needs to identify and assess factors that increase risks associated with cognition; (3) NASA needs to predict risks associated with cognition; and (4) NASA needs to mitigate risk, both prior to actual missions and in real time. This report develops the material relating to these four subgoals.

Woolford, Barbara↗
NASA NTRS1982

Reassessment of net radiation measurements in the atmosphere of Venus

An analysis was performed of the possible error mechanisms which degraded the IR net flux measurements made by the three small atmospheric probes dispatched from the Pioneer Venus spacecraft. The larger errors began below 30 km, and caused the data to be inconsistent with previous estimates of the atmospheric opacity. Evaluations were made of the possible radiation field perturbations behind each probe, cloud particle deposition on the sensor windows, and thermal disturbances within the sensors because of gas flow through the window retainers. The gas flow through the retainers was identified as the most likely error source, and was demonstrated in laboratory tests. A strong Reynolds number dependence was also found. Radiative transfer calculations were performed to account for the errors, using the constraints defined by the tests. Upper and lower bounds were calculated for the true net flux for both day and night conditions.

Revercomb, H. E.↗
NASA NTRS1991

Techniques for containing error propagation in compression/decompression schemes

Data compression has the potential for increasing the risk of data loss. It can also cause bit error propagation, resulting in catastrophic failures. There are a number of approaches possible for containing error propagation due to data compression: (1) data retransmission; (2) data interpolation; (3) error containment; and (4) error correction. The most fruitful techniques will be ones where error containment and error correction are integrated with data compression to provide optimal performance for both. The error containment characteristics of existing compression schemes should be analyzed for their behavior under different data and error conditions. The error tolerance requirements of different data sets need to be understood, so guidelines can then be developed for matching error requirements to suitable compression algorithms.

Kobler, Ben↗
NASA NTRS2016

Optical Error Budgeting Using Linearized Ray-Trace Models

The Root-Sum-Squared, or “RSS” wavefront error model is a simple, scalar tool, commonly used for space telescope error budgeting. At the same time, much more detailed models, combining ray-trace and Fourier optics with optical alignments and wavefront controls, can provide accurate, high -resolution simulations for detailed system and subsystem design. This paper makes a connection between the two modeling approaches by deriving RSS model coefficients from ray-trace models, including the effects of wavefront controls, for computing system performance from component error statistics. It is shown that, properly constructed, the simple RSS error budget is a covariance analysis, and can be as accurate as high-resolution wavefront models for statistical wavefront error prediction. A notional segmented-aperture space telescope is used to illustrate this error modeling process.

Wavefront error↗
NASA NTRS1976

Coordinated design of coding and modulation systems

Work on partial unit memory codes continued; it was shown that for a given virtual state complexity, the maximum free distance over the class of all convolutional codes is achieved within the class of unit memory codes. The effect of phase-lock loop (PLL) tracking error on coding system performance was studied by using the channel cut-off rate as the measure of quality of a modulation system. Optimum modulation signal sets for a non-white Gaussian channel considered an heuristic selection rule based on a water-filling argument. The use of error correcting codes to perform data compression by the technique of syndrome source coding was researched and a weight-and-error-locations scheme was developed that is closely related to LDSC coding.

Massey, J. L.↗
NASA NTRS1988

New insights in the numerical reliability properties of existing Kalman filter implementations

The convergence properties of Kalman filter algorithms are investigated analytically. A theoretical error analysis is performed on four types of algorithms, as defined by Anderson and Moore (1979): (1) a conventional Kalman filter, (2) a square-root (SR) covariance filter, (3) the Chandrasekhar SR filter, and (4) an SR information filter. The derivations are given in detail, and numerical results for the flight-path reconstruction problem studied by Verhaegen (1987) are presented in tables and graphs. It is shown that error propagation in algorithms (1) and (2) is sensitive to the condition number of the innovation-signal covariance matrix and the spectral norm of the filter state-transition matrix, whereas other parameters are dominant in (3) and (4). Filter (2) is found to be the most reliable for the class of problems studied.

Verhaegen, M. H.↗
NASA NTRS1977

The linear Fresnel lens solar concentrator: Transverse tracking error effects

The solar concentration performance of a line focusing, flat base Fresnel lens in the presence of small transverse tracking errors was analyzed. Solar transmittance of the lens and focal plane imaging characteristics were evaluated. Transmission losses by reflectance and material absorption were also studied.

Cosby, R. M.↗
NASA NTRS2024

Artemis I Optical Navigation System Performance

This paper summarizes the assessment of the Optical Navigation Flight Test Objective (FTO) during the flight of Artemis I. The Optical Navigation (OpNav) System was tested under a variety of range, target, and lighting conditions to evaluate the performance compared to the pre-flight predicted error models. In general, OpNav performed very well – successfully processing over a thousand images of starfields, Earth, and Moon. The performance of the algorithm when processing Moon images matched the pre-flight expected error models. The errors when processing Earth images were notably higher than the pre-flight models predicted, however this was found to be due to an over-estimation of the atmosphere bias used in the tuning of the algorithm. After the bias was re-tuned and the images reprocessed, performance significantly improved.

GNC↗
NASA NTRS1991

Stray signal requirements for compact range reflectors based on RCS measurement errors

The authors present a performance criterion for compact range reflectors such that their edge diffracted stray signal levels meet a reasonable radar cross section (RCS) measurement error requirement. It is shown by example that one of the significant error sources is the diffracted fields emanating from the edges or junctions of the reflector. This measurement error is demonstrated by placing a diagonal square flat plate in the target zone and rotating it to appropriate angles. These angles are determined by bisecting the plane wave and stray signal directions. This results in a peak bistatic measurement of the edge diffracted stray signal. It is proposed that the diagonal flat plate be used to evaluate new reflector designs as well as existing systems. A reasonable stray signal performance level has been developed so that new reflector systems can be characterized in terms of an RCS measurement error requirement.

Lee, Teh-Hong↗
NASA NTRS2004

Systematic Errors in Stereo PIV When Imaging through a Glass Window

This document assesses the magnitude of velocity measurement errors that may arise when performing stereo particle image velocimetry (PIV) with cameras viewing through thick, refractive window and where the calibration is performed in one plane only. The effect of the window is to introduce a refractive error that increases with window thickness and the camera angle of incidence. The calibration should be performed while viewing through the test section window, otherwise a potentially significant error may be introduced that affects each velocity component differently. However, even when the calibration is performed correctly, another error may arise during the stereo reconstruction if the perspective angle determined for each camera does not account for the displacement of the light rays as they refract through the thick window. Care should be exercised when applying in a single-plane calibration since certain implicit assumptions may in fact require conditions that are extremely difficult to meet in a practical laboratory environment. It is suggested that the effort expended to ensure this accuracy may be better expended in performing a more lengthy volumetric calibration procedure, which does not rely upon the assumptions implicit in the single plane method and avoids the need for the perspective angle to be calculated.

Green, Richard↗
NASA NTRS1999

Space Station GPS Multipath Analysis and Validation

To investigate the multipath effects on the International Space Station (ISS) Global Positioning System (GPS) measurement accuracy, experimental and computational investigations were performed to estimate the carrier phase errors due to multipath. A new modeling approach is used to reduce the required computing time by separating the dynamic structure elements from the static structure elements in the multipath computations. This study confirmed that the multipath is a major error source to the ISS GPS performance and can possibly degrade the attitude determination solution. It is demonstrated that the GPS antenna carrier phase errors due to multipath can be analyzed using the electromagnetic modeling technique such as the Uniform Geometrical Theory of Diffraction (UTD).

Hwu, Shian U.↗
NASA NTRS2011

Instrument Pointing Capabilities: Past, Present, and Future

This paper surveys the instrument pointing capabilities of past, present and future space telescopes and interferometers. As an important aspect of this survey, we present a taxonomy for "apples-to-apples" comparisons of pointing performances. First, pointing errors are defined relative to either an inertial frame or a celestial target. Pointing error can then be further sub-divided into DC, that is, steady state, and AC components. We refer to the magnitude of the DC error relative to the inertial frame as absolute pointing accuracy, and we refer to the magnitude of the DC error relative to a celestial target as relative pointing accuracy. The magnitude of the AC error is referred to as pointing stability. While an AC/DC partition is not new, we leverage previous work by some of the authors to quantitatively clarify and compare varying definitions of jitter and time window averages. With this taxonomy and for sixteen past, present, and future missions, pointing accuracies and stabilities, both required and achieved, are presented. In addition, we describe the attitude control technologies used to and, for future missions, planned to achieve these pointing performances.

celestial targets↗