Development of electron beam gun techniques for aluminizing a 23-ft-diameter collimating mirror.
Electron beam gun technique for aluminizing large collimating mirror
Noller, E. W.↗
SEARCH · Engineering Papers
Results for “electron beams”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Electron beam measurement of rotational temperatures with vibrational temperatures greater than 800 K
Electron beam measurement of rotational and high vibrational temperature in molecular nitrogen
Hunter, W. W., Jr.↗
Device for preventing high voltage arcing in electron beam welding Patent
Development of device to prevent high voltage arcing in electron beam welding
Hanchey, K. K.↗
Electron beam X-Y deflection system Final report
Design and fabrication of electron beam X-Y deflection system for retrofit on welding guns
Lowry, J. F.↗
Volume discharge in a gas, excited by an electron beam under conditions of nonuniform ionization
Volume discharge in gases excited by electron beams is discussed. The steady state electric field distribution is derived. The voltage-current and energy characteristics are described.
Evdokimov, O. B.↗
A theoretical study of the effects of interacting grain boundaries on electron-beam-induced currents
The influence of several grain boundaries on the electron-beam-induced current in polycrystalline silicon is investigated. The simple geometry contemplated here, consisting of two plane parallel grain boundaries possessing different effective, albeit constant, surface recombination velocities, intersecting a planar junction at right angles allows for an exact solution of the corresponding boundary value problem. It is shown that if the distance between the grain boundaries w becomes less than the diffusion length for minority carriers L within the grain, the grain boundary with the smaller effective recombination velocity becomes less and less visible the smaller the ratio w/L.
Luke, K. L.↗
Current understanding and issues on electron beam injection in space
The status of the physics understanding involved in electron beam injection in space is reviewed. The paper examines our understanding of beam plasma interactions and their associated wave and energized particle spectra of the processes involved in the beam plasma discharge, and of the vehicle charge neutralization. 'Strawman' models are presented for comparison with experimental observations.
Papadopoulos, K.↗
Pulsed electron beam emission in space
During the Spacelab-2 mission of July 1985, electron beams (1 keV, 50-150 mA) pulsed at ELF and VLF frequencies were emitted from the Space Shuttle Orbiter. The wave fields generated by the beam were monitored by a Plasma Diagnostics Package which was released as a free-flying subsatellite during a six hour period. Measurements of the Orbiter potential and the return current during beam emissions were obtained from a Charge and Current Probe mounted in the payload bay.
Neubert, T.↗
Self-rectifying electron beam melter for pendant-drop containerless processing
A self-rectifying electron beam melting technique is described. Utilizing an ac power supply, in contrast to the more usual dc supply, the in situ self-rectifying approach offers a simple and very inexpensive means of producing metallic pendant drops for use in containerless melt-processing experiments.
Pyun, D. S.↗
Non-circular electron beam spot welds in stainless steel alloys
Circularly symmetric-shaped spot welds are desirable for welding applications as they relate to heat and fluid flow conditions in the melt pool with predictable weld penetrations and repeatable results. Non-circular spot welds on the other hand result in undesirable and unpredictable weld penetrations or non-bridging of the liquid melt pool across the joint. Two known causes for non-circular melt pools occur when welding dissimilar metals, or when welding with skewed electron or laser beams that are not perpendicular to the surface. A largely unexplored additional factor, shown here, is an asymmetric power density distribution within the beam that can create non-circular melt pools even though the beam dimensions are much smaller than the melt pool itself.
36 MATERIALS SCIENCE↗
ELF waves and ion resonances produced by an electron beam emitting rocket in the ionosphere
Results are reported from the ECHO-6 electron-beam-injection experiment, performed in the auroral-zone ionosphere on March 30, 1983 using a sounding rocket equipped with two electron guns and a free-flying plasma-diagnostics instrument package. The data are presented in extensive graphs and diagrams and characterized in detail. Large ELF wave variations, superposed on the strong beam-sector-directed quasi-dc component, are observed in the 100-eV beam-induced plasma when the beam is injected in a transverse spiral, but not when it is injected upward parallel to the magnetic-field line. ELF activity is found to be suppressed whenever the rocket passed through field lines with auroral activity, suggesting that the waves are produced by the interaction of the beam potentials, plasma currents, and return currents neutralizing the accelerator payload.
Winckler, J. R.↗
Texture-Induced Anisotropy in an Inconel 718 Alloy Deposited Using Electron Beam Freeform Fabrication
A test block of Inconel (IN) 718 was fabricated using electron beam freeform fabrication (EBF(sup 3)) to examine how the EBF(sup 3) deposition process affects the microstructure, crystallographic texture, and mechanical properties of IN 718. Tests revealed significant anisotropy in the elastic modulus for the as-deposited IN 718. Subsequent tests were conducted on specimens subjected to a heat treatment designed to decrease the level of anisotropy. Electron backscatter diffraction (EBSD) was used to characterize crystallographic texture in the as-deposited and heat treated conditions. The anisotropy in the as-deposited condition was strongly affected by texture as evidenced by its dependence on orientation relative to the deposition direction. Heat treatment resulted in a significant improvement in modulus of the EBF(sup 3) product to a level nearly equivalent to that for wrought IN 718 with reduced anisotropy; reduction in texture through recrystallization; and production of a more homogeneous microstructure.
Tayon, W.↗
Quantitatively accounting for the effects of surface topography on the oxidation kinetics of additive manufactured Hastelloy X processed by electron beam melting
In this work, the effects of surface roughness on the high-temperature corrosion of nickel-based superalloy X produced through electron-beam melting (EBM) additive manufacturing were studied. Surface area of samples in the rough, as-fabricated condition was measured using a 2D cross-section image analysis technique and a 3D image analysis technique. To verify the accuracy of surface area measurements, oxidation testing of samples in the as-fabricated and polished conditions was performed; polished sample oxidation curves were then compared to the as-fabricated sample oxidation curves before and after being adjusted using obtained surface area measurements. It was found that the 2D technique accurately measured surface area and accounted for the overlapping features present on EBM sample surfaces, whereas the 3D technique did not. Further, it was also observed that oxidation kinetics were moderately faster on the alloy X samples in the as-fabricated condition than for the polished condition.
36 MATERIALS SCIENCE↗
The quasi-linear relaxation of thick-target electron beams in solar flares
The effects of quasi-linear interactions on thick-target electron beams in the solar corona are investigated. Coulomb collisions produce regions of positive gradient in electron distributions which are initially monotonic decreasing functions of energy. In the resulting two-stream instability, energy and momentum are transferred from electrons to Langmuir waves and the region of positive slope in the electron distribution is replaced by a plateau. In the corona, the timescale for this quasi-linear relaxation is very short compared to the collision time. It is therefore possible to model the effects of quasi-linear relaxation by replacing any region of positive slop in the distribution by a plateau at each time step, in such a way as to conserve particle number. The X-ray bremsstrahlung and collisional heating rate produced by a relaxed beam are evaluated. Although the analysis is strictly steady state, it is relevant to the theoretical interpretation of hard X-ray bursts with durations of the order of a few seconds (i.e., the majority of such bursts).
Mcclements, K. G.↗
Strong interaction of low-power electron beams with the ionosphere
The late stages of the beam-plasma instability are not yet completely understood. A better knowledge of the evolution of the beam is necessary to explain the results of the electron beam experiments carried out in the ionosphere. An alternative to the complete stabilization by quasi-linear (QL) diffusion is the parametric 'stabilization'. In this case the beam remains unstable for very long distances, while retaining its 'hot-beam' characteristics. A recent flight provides data that indicate the relevance of this mechanism in the evolution of the beam-plasma instability.
Llobert, X.↗
Polarization Selectivity of Aloof-Beam Electron Energy-Loss Spectroscopy in One-Dimensional ZnO Nanorods
Orientation-dependent electronic properties of wurtzite zinc oxide nanorods are characterized by aloof-beam electron energy-loss spectroscopy (EELS) carried out in a scanning transmission electron microscope (STEM). The two key crystal orientation differentiating transitions specific to the in-plane (13.0 eV) and out-of-plane (11.2 eV) directions with respect to the wurtzite structure are examined by first-principles density-functional theory calculations. We note some degree of orientation dependence at the onset of direct band gap transition near 3.4 eV. We demonstrate that good polarization selectivity can be achieved by placing the electron probe at different locations around the specimen with increasing impact parameter while keeping the beam-specimen orientation fixed. The observed results are qualitatively elucidated in terms of the perpendicular electric fields generated by the fast electron (60 kV) used in the microscope. The fact that good polarization selectivity can be achieved by aloof-beam EELS without the requirement of sample reorientation is an attractive aspect from the characterization method point of view in the STEM-EELS community.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Tracking atomic structure evolution during directed electron beam induced Si-atom motion in graphene via deep machine learning
Using electron beam manipulation, we enable deterministic motion of individual Si atoms in graphene along predefined trajectories. Structural evolution during the dopant motion was explored, providing information on changes of the Si atom neighborhood during atomic motion and providing statistical information of possible defect configurations. The combination of a Gaussian mixture model and principal component analysis applied to the deep learning-processed experimental data allowed disentangling of the atomic distortions for two different graphene sublattices. This approach demonstrates the potential of e-beam manipulation to create defect libraries of multiple realizations of the same defect and explore the potential of symmetry breaking physics. The rapid image analytics enabled via a deep learning network further empowers instrumentation for e-beam controlled atom-by-atom fabrication. Here, the analysis described in the paper can be reproduced via an interactive Jupyter notebook at https://git.io/JJ3Bx.
71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
Dendritic microstructures observed in electron-beam deposited hafnia films
Dendritic microstructures inside hafnia dielectric coatings fabricated via electron-beam deposition are investigated. These structures are observable with different optical characterization tools, including atomic force microscopy, fluorescence microscopy, Raman microscopy, and differential interference contrast microscopy. Long-term monitoring of individual samples over a seven-year time span revealed that the dendrite-like structures evolve over time, while the hafnia material in the dendrite structure—as compared to the rest of the coating—shows a decrease in crystallinity and an increase in defect density.
Hoffman, B. N. [Univ. of Rochester, NY (United Sta↗