SEARCH · Engineering Papers

Results for “effective resolution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

All sources NASA NTRS DOE OSTI

DOE OSTI2022

Rare earth element separations by high-speed counter-current chromatography

We report that following the initial development of High-Speed Counter-Current Chromatography (HSCCC) in the 1960s, several studies have explored its applicability in the separation of rare earth elements (REEs). More recently, however, HSCCC publications have transitioned towards the separation of natural products or pharmaceuticals, leaving the application for REEs largely unexplored from a practical standpoint. Herein, we expand upon prior work in this field by evaluating the suitability of HSCCC to separation of a subset of non-radioactive REEs (Nd, Sm, Eu, Tb, and Y) at 10 -4 mol levels using di-(2-ethylhexyl)phosphoric acid (HDEHP) in n-heptane as the stationary phase and hydrochloric acid as the mobile phase. First, the effect of flow rate on the stationary phase volume retention ratio and resolution of Nd/Sm/Eu subgroup was evaluated followed by optimization of step-gradient elution profiles resulting in additional recovery of Tb and Y within a seven-hour window. The five REEs were separated at the baseline resolution level or above. Elution profiles obtained from multiple runs across two independently operated columns and across independent runs were cross analyzed. Reproducibility in elution profiles point to future applications in radioelement separation chemistry, where both chemical and radiochemical purity are of importance.

47 OTHER INSTRUMENTATION↗

DOE OSTI2026

Improving energy efficiency while reducing anthropogenic heat from buildings: how retrofits influence the building stock and urban microclimate in Los Angeles

Anthropogenic heat (AH) from buildings contributes to urban overheating, especially during heat waves, yet building retrofit studies usually evaluate energy savings without assessing impacts on AH. This study quantifies how common building retrofit measures affect both building energy use and AH emissions across the City of Los Angeles. Using a bottom-up urban building energy modeling framework coupled with high-resolution local weather from the Weather Research and Forecasting model with Building Effect Parameterization (WRF-BEP), we evaluate eleven retrofit measures and two multi-measure retrofit packages. HVAC and LED lighting retrofits provide the largest city-wide annual site energy savings, while roof coating is most effective for reducing AH. A package optimized for energy savings reduces summer site energy use by about 32% (2.3 TWh), while a package incorporating AH-focused measures reduces the total AH by over 50% (137 PJ) with minimal difference in energy savings. The AH-aware package produces substantially greater urban cooling, reducing mean near-surface air temperature by up to 0.62 ℃ and peak temperature by up to 3.79 ℃. These results show that retrofit strategies selected only for energy savings may overlook major opportunities for urban heat mitigation. The study provides a framework for integrating AH into building retrofit planning and urban heat resilience policy.

Anthropogenic heat↗

DOE OSTI2023

Fate of arsenic during the interactions between Mn-substituted goethite and dissolved Fe(II)

Geogenic arsenic has become a globally-distributed groundwater contaminant, liberated from the weathering of arsenic-bearing sulfide minerals and often transported to aquifer sediments adsorbed to iron oxides. Among the iron oxides, goethite (α-FeOOH) is uniquely important for the fate of arsenic because of its widespread abundance, stability, and high affinity for binding arsenic. Goethite is ubiquitous in soils and sediments and often contains substituted elements, including manganese. Structural manganese may affect the surface reactivity and redox capacity of goethite and alter the mechanisms of recrystallization catalyzed by dissolved Fe(II), potentially affecting arsenic adsorption. Here, this study examined the fate of As(V) during the interactions between dissolved Fe(II) and Mn-substituted goethites at pH 4 and 7 as well as associated changes in arsenic speciation. At pH 7, the addition of dissolved Fe(II) initially increases the adsorption of As(V) onto Mn-bearing and Mn-free goethites. For the Mn-substituted goethites, the adsorbed As(V) slowly releases to solution at longer aging times. Fe(II) addition at pH 4 slightly increases As(V) uptake by Mn-substituted goethites, with differences in total sorption correlating with the Mn content in goethite. The addition of Fe(II) releases substantial dissolved manganese but the amount solubilized is higher at pH 4 compared to 7, suggesting that the presence of adsorbed As(V) may substantially promote the Mn release at pH 4. X-ray absorption fine structure spectroscopy shows that arsenic is stabilized as As(V) in all the samples and adsorbed on goethite via a bidentate binuclear mechanism. Fitting results show that the binding distance and coordination numbers are stable in Mn-free goethite and Mn-substituted goethite samples; the effect of substituted Mn on the surface complex structure is minor. High resolution transmission electron microscopy and X-ray diffraction confirm that no secondary ferrous arsenate minerals precipitate under both pH conditions. This study improves our understanding of the Fe(II)-As(V) interactions on iron oxides, and demonstrates that the substituted cations such as manganese may quantitatively alter the geochemical fate of arsenic during the reaction of dissolved Fe(II) with Fe(III) oxides.

58 GEOSCIENCES↗

DOE OSTI2024

Revealing Local and Directional Aspects of Catalytic Active Sites by the Nuclear and Surface Electrostatic Potential

This work examines the prospects of using the electrostatic potential, V(r), as a descriptor in heterogeneous catalysis. In particular, the subatomic spatial resolution of the property allows for analysis of both directionality and confinement effects in surface adsorption. This feature of V(r) is used to identify adsorption sites, orientations, and energetics for metal surfaces, particles, and nanoclusters upon interactions with catalytically relevant intermediates. The use of V(r) in assessing the 3D nature of catalytic sites in low-temperature and electrocatalysis is highlighted, and future directions in catalysis design are discussed. Ultimately, we provide a critical analysis of the use of V(r) in the predictions of local adsorption susceptibilities, and we address its limitations. The link between V(r) and other established descriptors in catalysis are motivated via physical relations and theoretical derivations; close ties are established between V(r) and the d-band center (ε d ), as well as the surface site stability (BE M ). In conclusion, by comparing the performance of V(r) evaluated on isodensity contours, i.e., the surface electrostatic potential, to that of V(r) evaluated at the nucleus of an atom, we investigate the application space for a directional and an atom-localized version of the V(r) descriptor for catalyst design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Unraveling Interdiffusion Phenomena and the Role of Nanoscale Diffusion Barriers in the Copper–Gold System

Diffusion is one of the most fundamental concepts in materials science, playing a pivotal role in materials synthesis, forming, and degradation. Of particular importance is solid state interdiffusion of metals which defines the usable parameter space for material combinations in the form of alloys. This parameter space can be explored on the macroscopic scale by using diffusion couples. However, this method reaches its limit when going to low temperatures, small scales, and when testing ultrathin diffusion barriers. Therefore, this work transfers the principle of the diffusion couples to small scales by using core–shell nanowires and in situ heating. This allows us to delve into the interdiffusion dynamics of copper and gold, revealing the interplay between diffusion and the disorder–order phase transition. Our in situ TEM experiments in combination with chemical mapping reveal the interdiffusion coefficients of Cu and Au at low temperatures and highlight the impact of ordering processes on the diffusion behavior. The formation of ordered domains within the solid-solution is examined using high-resolution imaging and nanodiffraction including strain mapping. In addition, we examine the effectiveness of ultrathin Al 2 O 3 barrier layers to control interdiffusion of the diffusion couple. Our findings indicate that a 5 nm thick layer serves as an efficient diffusion barrier. Furthermore, this research provides valuable insights into the interdiffusion behavior of Cu and Au on the nanoscale, offering potential applications in the development of miniaturized integrated circuits and nanodevices.

alloys↗

DOE OSTI2021

Dynamic time-warping correction for shifts in ultrahigh resolving power ion mobility spectrometry and structures for lossless ion manipulations

Detection of arrival time shifts between ion mobility spectrometry (IMS) separations can limit achievable resolving power (Rp), particularly when multiple separations are summed or averaged, as commonly practiced. Such variations are more apparent in higher Rp measurements, and are particularly evident in long path length traveling wave structures for lossless ion manipulations (SLIM) IMS due to their typically much longer separation times. Here we explore the utility of a data processing approaches employing linear alignment (LA) and nonlinear dynamic time warping (DTW) of IMS separations to correct for variations between separations, such as due to pressure fluctuations. For multipass SLIM IMS separations, where narrow mobility range measurements have arrival times that can extend to several seconds, the LA approach effectively corrected for such variations, and significantly improvement Rp for summed separations. However, LA was much less effective for high Rp broad mobility range separations, such as obtained with multilevel SLIM IMS. Changes in IMS arrival times ions were observed to be correlated with small pressure changes, with approximately 0.6% relative arrival time shifts being common, sufficient to result in a loss of Rp for summed separations. Comparison of the approaches showed DTW alignment performed similarly to LA when used over a narrow mobility range, but was significantly better (providing narrower peaks and higher signal intensities) for wide mobility range data. We found the DTW approach increased Rp by as much as 115% for measurements in which 50 IMS separations over 2 seconds were summed, and leading to a large improvement in effective Rp. We conclude that DTW is superior to LA for ultrahigh resolution broad mobility range SLIM IMS separations, correcting for ion arrival time shifts regardless of the cause. Our tool is publicly available for use with universal ion mobility format (.UIMF) and text (.txt) files.

Data alignment, dynamic time warping, ion mobility↗

DOE OSTI2021

Precision measurement of electron-electron scattering in GaAs/AlGaAs using transverse magnetic focusing

Electron-electron (e-e) interactions assume a cardinal role in solid-state physics. Quantifying the e-e scattering length is hence critical. In this paper we show that the mesoscopic phenomenon of transverse magnetic focusing (TMF) in two-dimensional electron systems forms a precise and sensitive technique to measure this length scale. Conversely we quantitatively demonstrate that e-e scattering is the predominant effect limiting TMF amplitudes in high-mobility materials. Using high-resolution kinetic simulations, we show that the TMF amplitude at a maximum decays exponentially as a function of the e-e scattering length, which leads to a ready approach to extract this length from the measured TMF amplitudes. The approach is applied to measure the temperature-dependent e-e scattering length in high-mobility GaAs/AlGaAs heterostructures. The simulations further reveal current vortices that accompany the cyclotron orbits - a collective phenomenon counterintuitive to the ballistic transport underlying a TMF setting.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Atomic-scale frustrated Josephson coupling and multicondensate visualization in FeSe

In a Josephson junction involving multiband superconductors, competition between interband and interjunction Josephson couplings gives rise to frustration and spatial disjunction of superfluid densities among superconducting condensates. Such frustrated coupling manifests as the quantum interference of Josephson currents from different tunnelling channels and becomes tunable if channel transparency can be varied. To explore these unconventional effects in the prototypical s ± -wave superconductor FeSe, we use atomic-resolution scanned Josephson tunnelling microscopy for condensate-resolved imaging and junction tuning—capabilities unattainable in macroscopic Josephson devices with fixed characteristics. We quantitatively demonstrate frustrated Josephson tunnelling by examining two tunnelling inequalities. The relative transparency of two parallel tunnelling pathways is found tunable, revealing a tendency towards a 0–π transition with decreasing scanned Josephson tunnelling microscopy junction resistance. Here, the simultaneous visualization of both superconducting condensates reveals anticorrelated superfluid modulations, highlighting the role of interband scattering. Our study establishes scanned Josephson tunnelling microscopy as a powerful tool enabling new research frontiers of multicondensate superconductivity.

Scanning probe microscopy↗

DOE OSTI2021

Effect of photon counting shot noise on total internal reflection microscopy

Total internal reflection microscopy (TIRM) measures changes in the distance between a colloidal particle and a transparent substrate by measuring the scattering intensity of the particle illuminated by an evanescent wave. From the distribution of the recorded separation distances, the height-dependent effective potential φ(z) between the colloidal particle and the substrate can be measured. In this work, we show that spatial resolution with which TIRM can measure φ(z) is limited by the photon counting statistics of the scattered laser light. Here, we develop a model to evaluate the effect of photon counting statistics on different potential profiles using Brownian dynamics simulations and experiments. Our results show that the effect of photon counting statistics depends on spatial gradients ∂φ/∂z of the potential, with the result that sharp features tend to be significantly blurred. We further establish the critical role of photon counting statistics and the intensity integration time τ in TIRM measurements, which is a trade-off between narrowing the width of the photon counting distribution and capturing the instantaneous position of the probe particle.

47 OTHER INSTRUMENTATION↗

DOE OSTI2023

Redshifting galaxies from DESI to JWST CEERS: Correction of biases and uncertainties in quantifying morphology

Observations of high-redshift galaxies with unprecedented detail have now been rendered possible with the James Webb Space Telescope (JWST). However, accurately quantifying their morphology remains uncertain due to potential biases and uncertainties. To address this issue, we used a sample of 1816 nearby DESI galaxies, with a stellar mass range of 10 9.75 - 11.25 M ⊙ , to compute artificial images of galaxies of the same mass located at 0.75 ≤ z ≤ 3 and observed at rest-frame optical wavelength in the Cosmic Evolution Early Release Science (CEERS) survey. We analyzed the effects of cosmological redshift on the measurements of Petrosian radius (R p ), half-light radius (R 50 ), asymmetry (A), concentration (C), axis ratio (q), and Sérsic index (n). Our results show that R p and R 50 , calculated using non-parametric methods, are slightly overestimated due to PSF smoothing, while R 50 , q, and n obtained through fitting a Sérsic model does not exhibit significant biases. By incorporating a more accurate noise effect removal procedure, we improve the computation of A over existing methods, which often overestimate, underestimate, or lead to significant scatter of noise contributions. Due to PSF asymmetry, there is a minor overestimation of A for intrinsically symmetric galaxies. However, for intrinsically asymmetric galaxies, PSF smoothing dominates and results in an underestimation of A, an effect that becomes more significant with higher intrinsic A or at lower resolutions. Moreover, PSF smoothing also leads to an underestimation of C, which is notably more pronounced in galaxies with higher intrinsic C or at lower resolutions. We developed functions based on resolution level, defined as R p /FWHM, for correcting these biases and the associated statistical uncertainties. Applying these corrections, we measured the bias-corrected morphology for the simulated CEERS images and we find that the derived quantities are in good agreement with their intrinsic values – except for A, which is robust only for angularly large galaxies where R p /FWHM ≥ 5. Our correction functions can be applied to other surveys, offering valuable tools for future studies.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2026

Quantifying the dislocation content of atomically resolved grain boundary line defects using the Nye tensor

The Nye tensor, which quantifies the density of Burgers vector for a given dislocation line direction, can be effectively used to characterize dislocation content in bulk crystals from atomic-resolution transmission electron microscopy images. The Nye tensor can be calculated from these images, in part because the reference state is simply defined by the lattice of the perfect crystal. The application of the Nye tensor to interfacial line defects, for which the natural reference state is the dichromatic pattern of the two grains in their reference orientation, poses additional challenges. In this work, we present a method that employs the Nye tensor to characterize the edge dislocation content of line defects at grain boundaries from atomic-resolution images. This approach enables us to rapidly characterize all edge dislocation content along a grain boundary. Additionally, the Nye tensor provides information about line defect core structure. Finally, we demonstrate this method on two exemplar defects: a twin boundary disconnection and a facet junction in face-centered cubic Au.

Crystallographic defects↗

DOE OSTI2023

Tomographic optical emission spectroscopy of an atmospheric pressure plasma jet and surface ionization waves on planar and structured surfaces

Here in this paper, an approach for 3D plasma structure diagnostics using tomographic optical emission spectroscopy (Tomo-OES) of a nanosecond pulsed atmospheric pressure plasma jet (APPJ) is presented. In contrast to the well-known Abel inversion, Tomo-OES does not require cylindrical symmetry to recover 3D distributions of plasma light emission. Instead, many 2D angular projections are measured with intensified cameras and the multiplicative algebraic reconstruction technique is used to recover the 3D distribution of light emission. This approach solves the line-of-sight integration problem inherent to optical diagnostics, allowing recovery of localized OES information within the plasma that can be used to better infer plasma parameters within complex plasma structures. Here, Tomo-OES was applied to investigate an APPJ operated with helium in ambient air and impinging on planar and structured dielectric surfaces. Surface charging caused the guided streamer from the APPJ to transition to a surface ionization wave (SIW) that propagated along the surface. The SIW experienced variable geometrical and electrical material properties as it propagated, leading to 3D configurations that were non-symmetric and spatially complex. Light emission from He, N$_2^+$, and N2 were imaged at ten angular projections and the respective time-resolved 3D emission distributions in the plasma were then reconstructed. The spatial resolution of each tomographic reconstruction was 7.4 µm and the temporal resolution was 5 ns, sufficient to observe the guided streamer and the effects of the structured surface on the SIW. Emission from He showed the core of the jet and emission from N$_2^+$ and N2 indicated effects of entrainment of ambient air. Penning ionization of N2 created a ring or outer layer of N$_2^+$ that spatially converged to form the 'plasma bullet' or spatially diverged across a surface as part of a SIW. The SIW entered trenches of size 150 µm, leading to decreases in plasma light emission in regions above the trenches. The plasma light emission was higher in some regions with trenches, possibly due to effects of field enhancement.

plasma interactions with complex surfaces↗

DOE OSTI2023

Spectroscopic measurement of increases in hydrogen molecular rotational temperature with plasma-facing surface temperature and due to collisional-radiative processes in tokamaks

Abstract Spatially resolved rotational temperature of ground state hydrogen molecules desorbed from plasma-facing surface was measured in QUEST, LTX-β, and DIII-D tokamaks, and the increases of the rotational temperature with the surface temperature and due to collisional-radiative processes in the plasmas were evaluated. The increase due to collisional-radiative processes was calculated by solving rate equations considering electron and proton collisional excitation and deexcitation and spontaneous emission. The calculation results suggest a high sensitivity for the rotational temperature to electron and proton densities, but a negligible sensitivity to the electron, proton, and surface temperatures. In the three tokamaks with different plasma parameters and plasma-facing surface materials, the spatial profile of the rotational temperature was estimated using Fulcher-α emission lines (600–608 nm). In QUEST, the spatial profile of the rotational temperature was estimated from spatially resolved spectra. In the other tokamaks, the rotational temperature was evaluated assuming a single point emission with a location determined from the Fulcher-α emission profile as measured with a filtered camera. In metal-walled devices QUEST and LTX-β, the rotational temperature increased with the surface temperature, and the calculated collisional-radiative increase is consistent with measured increase assuming that the rotational temperature at the surface is approximately 500–600 K higher than the surface temperature. In DIII-D with carbon walls, a larger collisional-radiative increase than the other tokamaks was observed because of the higher density leading to a large difference from the calculated increase compared to the other smaller tokamaks. Measurement of the Fulcher-α emission profile with higher spatial resolution in DIII-D may reduce the difference and reveal the effect of the surface temperature on the rotational temperature. These results show the increases in the rotational temperature with the surface temperature and due to the collisional-radiative processes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2024

Divergent urban land trajectories under alternative population projections within the Shared Socioeconomic Pathways

Population change is a main driver behind global environmental change, including urban land expansion. In future scenario modeling, assumptions regarding how populations will change locally, despite identical global constraints of Shared Socioeconomic Pathways (SSPs), can have dramatic effects on subsequent regional urbanization. Using a spatial modeling experiment at high resolution (1 km), this study compared how two alternative US population projections, varying in the spatially explicit nature of demographic patterns and migration, affect urban land dynamics simulated by the Spatially Explicit, Long-term, Empirical City development (SELECT) model for SSP2, SSP3, and SSP5. The population projections included: (1) newer downscaled state-specific population (SP) projections inclusive of updated international and domestic migration estimates, and (2) prevailing downscaled national-level projections (NP) agnostic to localized demographic processes. Our work shows that alternative population inputs, even those under the same SSP, can lead to dramatic and complex differences in urban land outcomes. Under the SP projection, urbanization displays more of an extensification pattern compared to the NP projection. This suggests that recent demographic information supports more extreme urban extensification and land pressures on existing rural areas in the US than previously anticipated. Urban land outcomes to population inputs were spatially variable where areas in close spatial proximity showed divergent patterns, reflective of the spatially complex urbanization processes that can be accommodated in SELECT. Although different population projections and assumptions led to divergent outcomes, urban land development is not a linear product of population change but the result of complex relationships between population, dynamic urbanization processes, stages of urban development maturity, and feedback mechanisms. These findings highlight the importance of accounting for spatial variations in the population projections, but also urbanization process to accurately project long-term urban land patterns.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2022

The DESI N -body simulation project – I. Testing the robustness of simulations for the DESI dark time survey

ABSTRACT Analysis of large galaxy surveys requires confidence in the robustness of numerical simulation methods. The simulations are used to construct mock galaxy catalogues to validate data analysis pipelines and identify potential systematics. We compare three N-body simulation codes, abacus, gadget-2, and swift, to investigate the regimes in which their results agree. We run N-body simulations at three different mass resolutions, 6.25 × 108, 2.11 × 109, and 5.00 × 109 h−1 M⊙, matching phases to reduce the noise within the comparisons. We find systematic errors in the halo clustering between different codes are smaller than the Dark Energy Spectroscopic Instrument (DESI) statistical error for $s\ \gt\ 20\ h^{-1}$ Mpc in the correlation function in redshift space. Through the resolution comparison we find that simulations run with a mass resolution of 2.1 × 109 h−1 M⊙ are sufficiently converged for systematic effects in the halo clustering to be smaller than the DESI statistical error at scales larger than $20\ h^{-1}$ Mpc. These findings show that the simulations are robust for extracting cosmological information from large scales which is the key goal of the DESI survey. Comparing matter power spectra, we find the codes agree to within 1 per cent for k ≤ 10 h Mpc−1. We also run a comparison of three initial condition generation codes and find good agreement. In addition, we include a quasi-N-body code, FastPM, since we plan use it for certain DESI analyses. The impact of the halo definition and galaxy–halo relation will be presented in a follow-up study.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2020

Experimental determination of the critical spin-glass correlation length in single-crystal CuMn

Using high resolution SQUID magnetometry we have made detailed measurements of the waiting time effect of the Thermoremanent Magnetization (TRM) decays on a single crystal CuMn(6%) spin glass sample near T g . In this study, we have systematically mapped the rapid decrease of the characteristic timescale tw eff , approaching T g from below, for waiting times ranging from 100 s to 100000 s. Using tw eff to determine the length scale of the growth of correlations during the waiting time, ξ TRM , (observed in both numerical studies and experiment), we observe both growth of ξ TRM in the spin glass phase and then a rapid reduction very close to T g . We interpret this reduction in ξ TRM , for all waiting times, as being governed by the critical correlation length scale ξ crit = a(T - T c ) -v .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2024

Spinon continuum in the Heisenberg quantum chain compound Sr 2 ⁢V 3 ⁢O 9

Magnetic excitations in the spin chain candidate Sr 2 ⁢V 3 ⁢O 9 have been investigated by inelastic neutron scattering on a single crystal sample. A spinon continuum with a bandwidth of ~22 meV is observed along the chain formed by alternating magnetic V 4+ and nonmagnetic V 5+ ions, which reveals the importance of the orbital degree of freedom in determining the chain axis as identified by prior electronic structure calculations. Incipient magnetic Bragg peaks due to weak ferromagnetic interchain couplings emerge when approaching the magnetic transition at T N ~ 5.3 K, while the excitations remain gapless within the instrumental resolution. Comparisons to the Bethe ansatz, density matrix renormalization group calculations, and effective field theories confirm Sr 2 ⁢V 3 ⁢O 9 as a host of weakly coupled S = 1/2 chains dominated by antiferromagnetic intrachain interactions of ~7.1(1) meV.

1-dimensional spin chains↗

DOE OSTI2021

A Novel Machine Learning Algorithm for Planetary Boundary Layer Height Estimation Using AERI Measurement Data

Accurately determining the height of the planetary boundary layer (PBL) is important since it can affect the climate, weather, and air quality. Ground-based infrared hyperspectral remote sensing is an effective way to obtain this parameter. Compared with radiosonde measurements, its temporal resolution is much higher. In this study, a method to retrieve the PBL height (PBLH) from the ground-based infrared hyperspectral radiance data is proposed based on machine learning. In this method, the channels that are sensitive to temperature and humidity profiles are selected as the feature vectors, and the PBLHs derived from radiosonde are taken as the true values. The support vector machine (SVM) is applied to train and test the data set, and the parameters are optimized in the process. The data set collected at the Atmospheric Radiation Measurement (ARM) program Southern Great Plains (SGP) from 2012 to 2015 is analyzed. The instruments used in this letter include Atmospheric Emitted Radiance Interferometer (AERI), Vaisala CL31 ceilometer, and radiosonde. It shows that the root mean square error (RMSE) between the PBLHs calculated by the proposed method using AERI data and those from radiosonde data can be within 370 m, and the square correlation coefficient (SCC) is greater than 0.7. Compared with the PBLHs derived from the ceilometer, it can be found that the new method is more stable and less affected by clouds.

54 ENVIRONMENTAL SCIENCES↗