Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “dynamic insulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Current collection in a magnetoplasma

The authors present a survey of a very incomplete subject, current collection in a magnetoplasma. The best-developed and simplest theories for current collection are steady-state collisionless theories, and these must be understood before departures from them can be analyzed usefully. Thus, the authors begin with a review of them. The authors include some recent numerical results which indicate that steady-state collisionless Laplace-limit currents remain substantially below the Parker-Murphy (1967) canonical upper bound out to very large electrode potentials, and approach it as a limit only very slowly if at all. Attempts to correct this theory for space-charge effects lead to potential disturbances which extend to infinite distance along the electrode's magnetic shadow, unless collisional effects are also taken into account. However, even a small amount of relative plasma drift motion, such as that involved in a typical rocket experiment, can change this conclusion fundamentally. It is widely believed that time-averaged current collection may be increased by effects of plasma turbulence, and the authors review the available evidence for and against this contention. Steady-state collisionless particle dynamics predicts the existence of a toroidal region of trapped orbits which surrounds the electrode. Light emissions from this region have been photographed, indicating that collisional ionization may also occur there, and this, and/or scattering by collisions or possibly turbulent fluctuations in this region, may also increase current collection by the electrode. The authors also discuss effects on particle motions near the electrode, associated with breakdown of magnetic insulation in the region of large electric fields near it.

Laframboise, Jim G.↗
NASA NTRS1993

Performance analysis of a large-grain dataflow scheduling paradigm

A paradigm for scheduling computations on a network of multiprocessors using large-grain data flow scheduling at run time is described and analyzed. The computations to be scheduled must follow a static flow graph, while the schedule itself will be dynamic (i.e., determined at run time). Many applications characterized by static flow exist, and they include real-time control and digital signal processing. With the advent of computer-aided software engineering (CASE) tools for capturing software designs in dataflow-like structures, macro-dataflow scheduling becomes increasingly attractive, if not necessary. For parallel implementations, using the macro-dataflow method allows the scheduling to be insulated from the application designer and enables the maximum utilization of available resources. Further, by allowing multitasking, processor utilizations can approach 100 percent while they maintain maximum speedup. Extensive simulation studies are performed on 4-, 8-, and 16-processor architectures that reflect the effects of communication delays, scheduling delays, algorithm class, and multitasking on performance and speedup gains.

Young, Steven D.↗
NASA NTRS1994

Evaluation of Wiring Constructions for Space Applications

A NASA Office of Safety and Mission Assurance (OS&MA) program to develop lightweight, reliable, and safe wiring insulations for aerospace applications is being performed by the NASA Lewis Research Center (LeRC). As part of this effort, a new wiring construction utilizing high strength PTFE (poly tetrafluoroethylene) as the insulation has been tested and compared with the existing military standard polyimide-based MIL-W-81381 wire construction. Electrical properties which were investigated included ac corona inception and extinction voltages (sea level and 60,000 feet), time/current to smoke, and wire fusing time. The two constructions were also characterized in terms of their mechanical properties of flexural strength, abrasion resistance (23 C and 150 C), and dynamic cut-through (23 C and 200 C). The results obtained in this testing effort are presented and discussed in this paper.

Hammoud, Ahmad N.↗
DOE OSTI2021

Nature of the ferromagnetic-antiferromagnetic transition in Y 1- x La x TiO 3

In this work, we explore the magnetically ordered ground state of the isovalently substituted Mott insulator Y 1- x La x TiO 3 for x≤ 0.3 via single-crystal growth, magnetometry, neutron diffraction, x-ray magnetic circular dichroism, muon spin rotation, and small-angle neutron scattering (SANS). We find that the decrease in the magnetic transition temperature on approaching the ferromagnetic-antiferromagnetic phase boundary at the La concentration xc ≈ 0.3 is accompanied by a strong suppression of both bulk and local ordered magnetic moments, along with a volume wise separation into magnetically ordered and paramagnetic regions. The thermal phase transition does not show conventional second-order behavior since neither a clear signature of dynamic critical behavior nor a power-law divergence of the magnetic correlation length is found for the studied substitution range; this finding becomes increasingly obvious with increasing La substitution. We find no evidence for a spin-glass phase. Finally, from SANS and magnetometry measurements, we discern a crossover from easy-axis to easy-plane magnetocrystalline anisotropy with increasing La substitution. These results indicate complex changes in magnetic structure upon approaching the phase boundary.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Effects of Quantum Dot Loading on the Radioluminescence Efficiency in Quantum-Dot-Embedded Composites

Nanoparticle-embedded plastic scintillators are an emerging technology for fast, large-area, high-resolution radiation detection and imaging. Here, this study investigates the properties of such composites, focusing on the effects of the quantum dot (QD) concentration on the radioluminescence (RL) intensity, spectra, and dynamics. Experiments using CdSe/CdS QDs in a polymer reveal a superlinear increase in RL with the QD concentration despite optical losses from inner filtering and interparticle interactions. When corrected for inner filtering, RL shows a quadratic concentration dependence, consistent with simple analytical models of improving the secondary electron capture. Practically, the benefits of high QD concentrations are muted by optical losses, but the findings apply to other systems with insulating hosts. In addition to manipulating emission for large effective Stokes shifts, future improvements may come from hosts with higher stopping power and better charge transport, which enable more effective funneling of excitations but without concomitant optical losses associated with high nanoparticle concentrations.

Auger recombination↗
DOE OSTI2021

A quantum material spintronic resonator

In a spintronic resonator a radio-frequency signal excites spin dynamics that can be detected by the spin-diode effect. Such resonators are generally based on ferromagnetic metals and their responses to spin torques. New and richer functionalities can potentially be achieved with quantum materials, specifically with transition metal oxides that have phase transitions that can endow a spintronic resonator with hysteresis and memory. Here we present the spin torque ferromagnetic resonance characteristics of a hybrid metal-insulator-transition oxide/ ferromagnetic metal nanoconstriction. Our samples incorporate V 2 O 3 , with Ni, Permalloy (Ni 80 Fe 20 ) and Pt layers patterned into a nanoconstriction geometry. The first order phase transition in V 2 O 3 is shown to lead to systematic changes in the resonance response and hysteretic current control of the ferromagnetic resonance frequency. Further, the output signal can be systematically varied by locally changing the state of the V 2 O 3 with a dc current. These results demonstrate new spintronic resonator functionalities of interest for neuromorphic computing.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Dynamical defects in a two-dimensional Wigner crystal: Self-doping and kinetic magnetism

We study the quantum dynamics of interstitials and vacancies in a two-dimensional Wigner crystal (WC) using a semi-classical instanton method that is asymptotically exact at low density, i.e., in the r s → ∞ limit. Here, the dynamics of these point defects mediates magnetism with much higher energy scales than the exchange energies of the pure WC. Via exact diagonalization of the derived effective Hamiltonians in the single-defect sectors, we find the dynamical corrections to the defect energies. The resulting expression for the interstitial (vacancy) energy extrapolates to 0 at r s = r mit ≈ 70 (r s ≈ 30), suggestive of a self-doping instability to a partially melted WC for some range of r s below r mit . We thus propose a “metallic electron crystal” phase of the two-dimensional electron gas at intermediate densities between a low density insulating WC and a high density Fermi fluid.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

In‐Operando Spatiotemporal Imaging of Coupled Film‐Substrate Elastodynamics During an Insulator‐to‐Metal Transition

Abstract The drive toward non‐von Neumann device architectures has led to an intense focus on insulator‐to‐metal (IMT) and the converse metal‐to‐insulator (MIT) transitions. Studies of electric field‐driven IMT in the prototypical VO 2 thin‐film channel devices are largely focused on the electrical and elastic responses of the films, but the response of the corresponding TiO 2 substrate is often overlooked, since it is nominally expected to be electrically passive and elastically rigid. Here, in‐operando spatiotemporal imaging of the coupled elastodynamics using X‐ray diffraction microscopy of a VO 2 film channel device on TiO 2 substrate reveals two new surprises. First, the film channel bulges during the IMT, the opposite of the expected shrinking in the film undergoing IMT. Second, a microns thick proximal layer in the substrate also coherently bulges accompanying the IMT in the film, which is completely unexpected. Phase‐field simulations of coupled IMT, oxygen vacancy electronic dynamics, and electronic carrier diffusion incorporating thermal and strain effects suggest that the observed elastodynamics can be explained by the known naturally occurring oxygen vacancies that rapidly ionize (and deionize) in concert with the IMT (MIT). Fast electrical‐triggering of the IMT via ionizing defects and an active “IMT‐like” substrate layer are critical aspects to consider in device applications.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Subcycle contact-free nanoscopy of ultrafast interlayer transport in atomically thin heterostructures

Tunnelling is one of the most fundamental manifestations of quantum mechanics. The recent advent of lightwave-driven scanning tunnelling microscopy has revolutionized ultrafast nanoscience by directly resolving electron tunnelling in electrically conducting samples on the relevant ultrashort length- and timescales. In this work, we introduce a complementary approach based on terahertz near-field microscopy to perform ultrafast nano-videography of tunnelling processes even in insulators. The central idea is to probe the evolution of the local polarizability of electron–hole pairs with evanescent terahertz fields, which we detect with subcycle temporal resolution. In a proof of concept, we resolve femtosecond interlayer transport in van der Waals heterobilayers and reveal pronounced variations of the local formation and annihilation of interlayer excitons on deeply subwavelength, nanometre scales. Such contact-free nanoscopy of tunnelling-induced dynamics should be universally applicable to conducting and non-conducting samples and reveal how ultrafast transport processes shape functionalities in a wide range of condensed matter systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Electro-Thermo-Mechanical (ETM) Study on Submarine Dynamic Power Cables (SDPC) for Offshore Wind Transmission

Understanding the failure mechanisms of submarine dynamic power cables (SDPC) is critical for innovative design to meet the 2035 cost reduction target of U.S. DOE Floating Offshore Wind Shot. This is important because the current design suffers a significant failure rate in the field. This project conducted a systematic electro-thermo-mechanical (ETM) experimental study on the power cores extracted from a 15kV power cable with three cores of copper conductor, ethylene propylene rubber (EPR) insulation, and continuously corrugated welded aluminum armor (CCWA). An ETM testing system was developed by integrating a high voltage (HV) amplifier, two ceramic heaters, and a rod-plate transverse compression setup into a mechanical testing machine. Increasing temperature from room temperature (RT, 22 degree C) to 90 degree C resulted in the 67% decrease in the failure mechanical load as defined by the dielectric breakdown. Under creep mechanical loading, the dielectric breakdown time was decreased by 70% for a given mechanical load when the specimen temperature increased from RT to 90oC. The failure strain in both monotonic and creep mechanical loading modes was related to the maximum mechanical load applied. Although the dielectric breakdown occurred in the ETM test, the post-test measurement revealed an impressive recovery of electric resistance. The failure analysis on cross section of tested specimens indicated a sizable gap across insulation layer near the area between copper conductor and loading rod, which apparently resulted from online dielectric failure and offline elastic recovery of components including conductor and insulation layer.

17 WIND ENERGY↗
NASA NTRS2006

Experimental Partitioning of Cr(3+) and Sc(3+) into Olivine: Mechanisms and Implications

Olivine (Mg, Fe)Si2O4 does not, by stoichiometry, accept cations such as Sc(3+) or Cr(3+). However, the partition coefficients of Sc and Cr between olivine and liquid are significant 0.2-1.0. We have measured Cr(3+) partition coefficients of near unity and have grown olivines with nearly 3 wt.% Sc2O3. Therefore, there must be a simple means of charge balancing 3+ ions in a crystal structure that was obviously not designed to receive other than 2+ ions on the olivine M sites. The simplest explanation is that two 3+ ions enter the olivine structure by displacing three 2+ ions and creating an M site vacancy. Even this explanation has difficulties. For minor elements in our experiments (~1 wt.%) the odds of a minor element 3+ ion finding a second 3+ for charge balance are of the order of 100:1 against. Because of the reducing conditions of our experiments, Fe(3+) will not suffice; and Al(3+) is not in sufficient quantity in olivine for charge balance. Therefore, Cr or Sc must, in effect, charge balance itself. For true trace elements, the problem is compounded many times. For an ion at the 10 ppm level the chances of finding a second (for example) Sc ion is approx.10(exp 5):1 against. Of course, any other 3+ ion would suffice but comparisons between percent level doping experiments and trace level partitioning indicate that Henry s law is obeyed. This implies that the same substitution mechanism occurs at both the percent and tens of ppm levels. There are two simple solutions to this problem: (i) The electrical conductivity of olivine is such that charge balance need not be local. This requires substantial domains within the olivine crystal in electrical contact by migration of vacancies or electronic defects. (ii) The 3+ cation brings along its own charge-balancing ion because it existed as a dimer in the silicate liquid. Olivine is not a true insulator but is actually a p-type semiconductor. Even so, electrical communication by this means is unlikely over the tens or hundreds of unit cells that would be required for charge balance to be local. Therefore, we cautiously favor the idea that melt speciation is the means by which 3+ ions enter the olivine structure. Possibly this model might be tested by in situ XAFS measurements or by molecular dynamical calculations.

Jones, John↗
DOE OSTI2024

Antiferromagnetic V 2 ⁢O 3 based exchange coupling

Vanadium sesquioxide (V 2 ⁢O 3 ) is a strongly correlated electronic material that famously undergoes a triple coupled first-order transition where it transitions from a paramagnetic metal with a rhombohedral structure at high temperature to an antiferromagnetic insulator with a monoclinic structure. While several studies have used one of both electronic and structural transitions to control the properties of a heterostructure, evidence of magnetic coupling has notoriously yet to be found. In this paper, we report on a robust magnetic coupling between the antiferromagnetic (AFM) V 2 ⁢O 3 and ferromagnetic (FM) Permalloy (Py) layers that results in a significant exchange bias and strain-induced coercivity enhancement. We provide a temperature and angle-dependent study of magnetic properties, which clearly indicates exchange bias at the AFM/FM interface that appears at the onset of the metal-insulator transition. The magnitude of the exchange bias is strongest when the field is applied along the [001] V 2 ⁢O 3 crystallographic orientation which corresponds to an AFM spin configuration on the [110] surface. Here, this opens the door to designing and implementing novel functionalities in transition metal oxide-based computing using the connection between magnetism and the metal-insulator transition.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1977

Aerodynamic heating in large cavities in an array of RSI tiles

A large panel of reusable surface insulation (RSI) tiles including lost tile cavities was aerothermally tested in the Langley 8 foot high temperature structures tunnel to determine both the heat load within the cavities and the structural performance of the RSI surrounding the cavities. Tests were conducted with a turbulent boundary layer at a nominal free stream Mach number of 6.6, a total temperature of 1800 K, a Reynolds number per meter of 5 million, and a dynamic pressure of 62 kPa. The maximum aerodynamic heating to the floor of the cavity was two to three times the normal surface heating. The cavity heating rates agreed with data from other facilities and were successfully correlated with an empirical equation. A zippering failure occurred to a tile downstream of a double tile cavity when the separated flow attached to the floor of the cavity and forced the tile from its position.

Hunt, L. R.↗
NASA NTRS1984

The structural response of a rail acceleration

The transient response of a 0.4 by 0.6 cm rectangular bore rail accelerator was analyzed by a three dimensional finite element code. The copper rail deflected to a peak value of 0.08 mm in compression and then oscillated at an amplitude of 0.02 mm. Simultaneously the insulating side wall of glass fabric base, epoxy resin laminate (G-10) was compressed to a peak value of 0.13 mm and rebounded to a steady state in extension. Projectile pinch or blowby due to the rail extension or compression, respectively, can be identified by examining the time history of the rail displacement. The effect of blowby was most significant at the side wall characterized by mm size displacement in compression. Dynamic stress calculations indicate that the G-10 supporting material behind the rail is subjected to over 21 MPa at which the G-10 could fail if the laminate was not carefully oriented. Results for a polycarbonate resin (Lexan) side wall show much larger displacements and stresses than for G-10. The tradeoff between the transparency of Lexan and the mechanical strength of G-10 for sidewall material is obvious. Displacement calculations from the modal method are smaller than the results from the direct integration method by almost an order of magnitude, because the high frequency effect is neglected. Previously announced in STAR as N83-35412

Wang, S. Y.↗
NASA NTRS2005

Characterization of Space Shuttle Ascent Debris Aerodynamics Using CFD Methods

An automated Computational Fluid Dynamics process for determining the aerodynamic Characteristics of debris shedding from the Space Shuttle Launch Vehicle during ascent is presented. This process uses Cartesian fully-coupled, six-degree-of-freedom simulations of isolated debris pieces in a Monte Carlo fashion to produce models for the drag and crossrange behavior over a range of debris shapes and shedding scenarios. A validation of the Cartesian methods against ballistic range data for insulating foam debris shapes at flight conditions, as well as validation of the resulting models, are both contained. These models are integrated with the existing shuttle debris transport analysis software to provide an accurate and efficient engineering tool for analyzing debris sources and their potential for damage.

Murman, Scott M.↗
DOE OSTI2024

Local-scale heterogeneity of soil thermal dynamics and controlling factors in a discontinuous permafrost region

In permafrost regions, the strong spatial and temporal variability in soil temperature cannot be explained by the weather forcing only. Understanding the local heterogeneity of soil thermal dynamics and their controls is essential to understand how permafrost systems respond to climate change and to develop process-based models or remote sensing products for predicting soil temperature. In this study, we analyzed soil temperature dynamics and their controls in a discontinuous permafrost region on the Seward Peninsula, Alaska. We acquired one-year temperature time series at multiple depths (at 5 or 10 cm intervals up to 85 cm depth) at 45 discrete locations across a 2.3 km 2 watershed. We observed a larger spatial variability in winter temperatures than that in summer temperatures at all depths, with the former controlling most of the spatial variability in mean annual temperatures. We also observed a strong correlation between mean annual ground temperature at a depth of 85 cm and mean annual or winter season ground surface temperature across the 45 locations. We demonstrate that soils classified as cold, intermediate, or warm using hierarchical clustering of full-year temperature data closely match their co-located vegetation (graminoid tundra, dwarf shrub tundra, and tall shrub tundra, respectively). We show that the spatial heterogeneity in soil temperature is primarily driven by spatial heterogeneity in snow cover, which induces variable winter insulation and soil thermal diffusivity. These effects further extend to the subsequent summer by causing variable latent heat exchanges. Finally, we discuss the challenges of predicting soil temperatures from snow depth and vegetation height alone by considering the complexity observed in the field data and reproduced in a model sensitivity analysis.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Ultrafast One-Dimensional Peierls-Distortion Dynamics in 1⁢T′−Re⁢S 2 Revealed by 4D Electron Microscopy

Rhenium disulfide (ReS 2 ), a prototypical 2D semiconductor with an anisotropic 1⁢T′ structure due to the pronounced Peierls distortion, has demonstrated great potential for polarization-dependent optoelectronics and photonics. Here, we report an ultrafast phase transition occurring within 1 ps, accompanied by a one-dimensional Peierls-distortion relaxation in 1⁢T′−ReS 2 revealed with combined 4D electron microscopy and time-dependent density functional theory calculations. Upon femtosecond laser pulse excitation, the Re-Re dimerization morphology rapidly transforms from a diamond cluster to zigzag chains and persists for several nanoseconds. Here, this ultrafast Peierls-distortion relaxation is further verified by transient changes in optical anisotropy via polarization-dependent transient absorption spectroscopy. Time-dependent density functional theory calculations attribute this novel phase transition to strong correlation between Peierls distortion and impulsive photoexcited carrier doping, predicting a transient band-gap collapse. This Letter opens up an exciting avenue for ultrafast control of Peierls-distortion-induced anisotropy and the metal-insulator transition in 1⁢T′−ReS 2 .

1T’-ReS2↗
DOE OSTI2020

Charge-density-wave melting in the one-dimensional Holstein model

We study the Holstein model of spinless fermions, which at half filling exhibits a quantum phase transition from a metallic Tomonaga-Luttinger liquid phase to an insulating charge-density-wave (CDW) phase at a critical electron-phonon coupling strength. In our work, we focus on the real-time evolution starting from two different types of initial states that are CDW ordered: (i) ideal CDW states with and without additional phonons in the system and (ii) correlated ground states in the CDW phase. We identify the mechanism for CDW melting in the ensuing real-time dynamics and show that it strongly depends on the type of initial state. We focus on the far-from-equilibrium regime and emphasize the role of electron-phonon coupling rather than dominant electronic correlations, thus complementing a previous study of photoinduced CDW melting [H. Hashimoto and S. Ishihara, Phys. Rev. B 96, 035154 (2017)]. The numerical simulations are performed by means of matrix-product-state based methods with a local basis optimization (LBO). Within these techniques, one rotates the local (bosonic) Hilbert spaces adaptively into an optimized basis that can then be truncated while still maintaining a high precision. In this work, we extend the time-evolving block decimation (TEBD) algorithm with LBO, previously applied to single-polaron dynamics, to a half-filled system. We demonstrate that in some parameter regimes, a conventional TEBD method without LBO would fail. Furthermore, we introduce and use a ground-state density-matrix renormalization group method for electron-phonon systems using local basis optimization. In our examples, we account for up to M ph =40 bare phonons per site by working with O(10) optimal phonon modes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗