SEARCH · Engineering Papers

Results for “distributed parallelization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

All sources NASA NTRS DOE OSTI

DOE OSTI2022

Surface Heater Fabrication Using Micro-Lithography for Transpiration Cooling Heat Transfer Coefficient Measurements

Abstract Transpiration cooling is able to provide more uniform coolant coverage than film cooling to effectively protect the component surface from contacting the hot gas. Due to numerous coolant ejection outlets within a small area at the target surface, the experimental thermo-fluid investigation on transpiration cooling becomes a significant challenge. Two classic methods to investigate film cooling, the steady-state foil heater method and the transient thermography technique, fail for transpiration cooling because the foil heater would block numerous coolant outlets, and the semi-infinite solid conduction model no longer holds for porous plates. In this study, a micro-lithography method to fabricate a silver coil pattern on top of the additively manufactured polymer porous media as the surface heater was proposed. The circuit was deliberately designed to cover the solid surface in a combination of series connection, and parallel connection to ensure the power in each unit cell area at the target surface was identical. With uniform heat flux generation, the steady-state tests were conducted to obtain distributions of a pair of parameters, adiabatic cooling effectiveness, and heat transfer coefficient (HTC). The results showed that the adiabatic cooling effectiveness could reach 0.65 with a blowing ratio lower than 0.5. Meanwhile, the heat transfer coefficient ratio (hf/h0) of transpiration cooling was close to 1 with a small blowing ratio at 0.125. A higher HTC ratio was observed for smaller pitch-to-diameter cases due to more turbulence intensity generated at the target surface.

Engineering↗

DOE OSTI2021

Operating Stresses and Their Effects on Degradation of LSM-Based SOFC Cathodes

The performance of solid oxides fuel cells (SOFCs) with four different Mn excess of lanthanum strontium manganite (LSM) -based cathodes were examined under different temperatures (1,000 °C, 900 °C), current densities (0, 380, and 760 mA cm -2 ), and cathode atmospheres (p O 2 )=0.1,0.15,0.21) for durations ranging from 58 to 1,008 h. Each yttria-stabilized zirconia (YSZ) electrolyte-supported “button” cell had a porous Ni/YSZ composite anode and a porous LSM/YSZ composite cathode. The cells’ output voltage versus time were recorded and electrochemical impedance spectroscopy (EIS) and linear sweep voltammetry (LSV) measurements were performed every 24 hours. The total area specific resistance (ASR) was calculated from these measurements. The values of ASR from both EIS and LSV were comparable between each other but lower than that from durability test. Distribution of relaxation times (DRT) analysis was performed to investigate the electrochemical processes and their corresponding relaxation frequencies as well as their attributions to the total ASR. The series resistance and parallel resistance that obtained from the equivalent circuit fit of the Nyquist plot were higher at low temperature and low p O 2 regardless of LSM compositions. The area of the peaks derived from DRT analysis increased with time during individual tests. The microstructures of the tested cells were examined using scanning electron microscopy and energy-dispersive x-ray spectroscopy (SEM/EDS). Manganese oxide particles were observed near the cathode-electrolyte interface after prolonged (1,008 h) testing in air of a cell with LSM of 11% manganese excess, and after a short test (58 h) under low oxygen (p O 2 = 0.10) in a cell with LSM of 5% manganese excess. However, the role of MnOx in cell degradation is still unknown.

08 HYDROGEN↗

DOE OSTI2020

Scalable line and plane relaxation in a parallel structured multigrid solver

The efficient solution of sparse, linear systems that arise through the discretization of partial differential equations remains a key challenge for a range of high performance scientific simulations. One approach for reducing data movement and improving performance is by exposing and exploiting structure in a problem through the use of robust structured multilevel solvers. By choosing coarsening that preserves the structure of the problem, these methods maintain efficient structured computation and communication throughout the multigrid hierarchy. However, when coarsening is not permitted to be dependent on the operator, anisotropy must be addressed by the smoother — producing error compatible for coarse-grid correction with structured coarsening. Here, the components required in a scalable parallel structured solver are described with a focus on memory and communication efficiency of robust smoothers. While the implementation of communication and memory reduction techniques in smoothers integrated in a complete 3D solver present a significant engineering challenge, a novel approach is proposed that addresses these challenges systematically through a change to the solver’s execution model. Enabled by user-level threading paired with a set of data and communication abstractions, this approach permits seamless aggregation of communication in plane smoothers — directly reusing code for a 2D distributed multilevel cycle. Results show an effective reduction in communication costs for coarse-grid problems, and result in a speedup of 8.7x in smoothing routines shown in Fig. 12 using this approach. This produces a significant improvement to strong scalability while maintaining favorable weak scaling behavior. Finally, a parallel scaling study using a series of refined meshes is included that demonstrates the effectiveness of this approach in an application of interest.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2020

Three-dimensional cross-field flows at the plasma-material interface in an oblique magnetic field

This article describes experimental evidence that the magnetic presheath is a fully three-dimensional structure modified by ion–neutral collisions. Velocity distributions of both ions and neutrals, obtained via laser-induced fluorescence, show that cross field ion drifts do not result from entrainment of ions in a flowing neutral background. Ion flows parallel to E x B arise and accelerate to as much as 0.2c s within several ion gyroradii of the boundary surface, where c s is the sound speed. Within measurement resolution, the onset of the E x B aligned flow occurs at the same distance to the surface that ions begin to deflect from travel along magnetic field lines. Collisional fluid and particle-in-cell simulations of the boundary region are compared to the experimental measurements. We find that, in contrast to the classical collisionless Chodura model, collisional effects between the ions and the non-flowing neutral population are essential to quantitatively predict the observed ion drift velocities. No momentum coupling between ions and neutrals, separable from noise and other effects, is observed in either signal. Here, we discuss several explanations and implications of this observation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2022

Interplay of Electrode Heterogeneity and Lithium Plating

Lateral microstructure heterogeneity in anodes is known to induce nonuniform current density, state of charge, and lithium plating. This means that such electrode heterogeneity can limit the fast charging of lithium-ion batteries. In this work, a combination of experiments and simulation is employed to understand the effect of mm scale lateral heterogeneity on cell aging. A previously developed model was extended to efficiently simulate SEI formation and Li plating for independent regions of an electrode. The model consists of three parallel regions each described under a P2D framework and with a distinct ionic resistance and possibly active material loading. The results suggest that during fast charge when the active material is uniformly distributed across the three regions, the region with the highest resistance reaches the end of life sooner than the other regions. There is also positive feedback from Li metal filling the pores near the separator interface that further accelerates lithium plating. Lastly, when there is a non-uniform active material distribution associated with the ionic resistance heterogeneity, tight competition between regions can occur, leading to less overall lithium plating and plating that is more uniform between regions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

CORRLA-RS

The CORRLA-RS package provides a suite of statistical methods for sampling multidimensional distributions and to conduct sensitivity and correlation analysis of large scale data in the Rust programming language. The software provides a unique solution to multidimensional constrained sampling problems utilizing a combination of parallelized Markov Chain Monte Carlo methods and traditional rejection sampling. The sensitivity and correlation analysis methods are backed by a high performance randomized singular value decomposition implementation which enables datasets larger than the random access memory (RAM) size to be analyzed. Additionally, CORRLA-RS implements the active subspace identification method using a KD-Tree and the randomized singular value decomposition acting in concert.

Gurecky, William [Oak Ridge National Laboratory (O↗

DOE OSTI2024

Efficient First-Order Algorithms for Large-Scale, Non-Smooth Maximum Entropy Models with Application to Wildfire Science

Maximum entropy (MaxEnt) models are a class of statistical models that use the maximum entropy principle to estimate probability distributions from data. Due to the size of modern data sets, MaxEnt models need efficient optimization algorithms to scale well for big data applications. State-of-the-art algorithms for MaxEnt models, however, were not originally designed to handle big data sets; these algorithms either rely on technical devices that may yield unreliable numerical results, scale poorly, or require smoothness assumptions that many practical MaxEnt models lack. In this paper, we present novel optimization algorithms that overcome the shortcomings of state-of-the-art algorithms for training large-scale, non-smooth MaxEnt models. Our proposed first-order algorithms leverage the Kullback–Leibler divergence to train large-scale and non-smooth MaxEnt models efficiently. For MaxEnt models with discrete probability distribution of n elements built from samples, each containing m features, the stepsize parameter estimation and iterations in our algorithms scale on the order of O(mn) operations and can be trivially parallelized. Moreover, the strong ℓ1 convexity of the Kullback–Leibler divergence allows for larger stepsize parameters, thereby speeding up the convergence rate of our algorithms. To illustrate the efficiency of our novel algorithms, we consider the problem of estimating probabilities of fire occurrences as a function of ecological features in the Western US MTBS-Interagency wildfire data set. Our numerical results show that our algorithms outperform the state of the art by one order of magnitude and yield results that agree with physical models of wildfire occurrence and previous statistical analyses of wildfire drivers.

Physics↗

DOE OSTI2021

Along the Channel Gradients Impact on the Spatioactivity of Gas Diffusion Electrodes at High Conversions during CO 2 Electroreduction

Results of a 2-D transport model for a gas diffusion electrode performing CO 2 reduction to CO with a flowing catholyte are presented, including the concentration gradients along the flow cell, spatial distribution of the current density and local pH in the catalyst layer. The model predicts that both the concentration of CO 2 and the buffer electrolyte gradually diminish along the channels for a parallel flow of gas and electrolyte as a result of electrochemical conversion and nonelectrochemical consumption. At high single-pass conversions, significant concentration gradients exist along the flow channels leading to large local variations in the current density (>150 mA/cm 2 ), which becomes prominent when compared to ohmic losses. In addition, concentration overpotentials change dramatically with CO 2 flow rate, which results in significant differences in outlet concentrations at high conversions. The outlet concentration of CO attains a maximum of 80% along with 5% CO 2 and 15% H 2 , although the maximum single-pass conversion is limited to below 60% due to homogeneous consumption by the electrolyte. Fundamental and practical implications of our findings on electrochemical CO 2 reduction are discussed with a focus on the trade-off between high current density operation and high single-pass conversion efficiency.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Hardware Design of a 13.8-kV/3-MVA PV Plus Storage Solid-State Transformer (PVS-SST)

Not provided.

Engineering↗

DOE OSTI2022

The Physical Properties of Low-redshift FeLoBAL Quasars. II. The Rest-frame Optical Emission Line Properties

We report the results of an analysis of the Hβ emission line region of a sample of 30 low-redshift (z < 1) iron low-ionization broad absorption line quasars (FeLoBALQs). Eleven of these objects are newly classified as FeLoBALQs. A matched sample of 132 unabsorbed quasars was analyzed in parallel. The emission lines showed the well-known anticorrelation between the [O III ] and Fe II emission. Using a summary statistic called E1 to quantify this anticorrelation, we found that while the distribution of E1 for the unabsorbed quasars has a single peak, the FeLoBALQs have a bimodal shape in this parameter. Previous studies have shown that the line emission properties of BAL and non-BALQs are consistent; therefore, the difference in the Hβ region emission between FeLoBALQs and unabsorbed quasars is a new result. The two populations of FeLoBALQs are characterized by low and high bolometric luminosities and Eddington ratios. Some previous studies have suggested that BALQs are high accretion rate objects and therefore the discovery of the low accretion rate branch of FeLoBAL quasars was unexpected. We also found that the Hβ FWHM is systematically broader among the FeLoBALQs, implying a higher inclination viewing angle or a dearth of low velocity line emitting gas.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2025

Leveraging Pre-Built Catalogs and Object-Level Scheduling to Eliminate I/O Bottlenecks in HPC Environments

Modern High-Performance Computing (HPC) environments face mounting challenges due to the shift from large to small file datasets, along with an increasing number of users and parallelized applications. As HPC systems rely on Parallel File Systems (PFS), such as Lustre for data processing, performance bottlenecks stemming from Object Storage Target (OST) contention have become a significant concern. Existing solutions, such as LADS with its object-level scheduling approach, fall short in large-scale HPC environments due to their inability to effectively address metadata I/O bottlenecks and the growing number of I/O processes. This study highlights the pressing need for a comprehensive solution that tackles both OST contention and metadata I/O challenges in diverse HPC workloads. To address these challenges, we propose SwiftLoad, an object-level I/O scheduling framework that leverages a metadata catalog to enhance the performance and efficiency of parallel HPC utilities. The adoption of the metadata catalog mitigates the metadata I/O bottlenecks that commonly occur in HPC utilities, a challenge that is particularly pronounced in object-level I/O scheduling. SwiftLoad addresses OST contention and the uneven distribution of I/O processes across different OSTs through mathematical modeling and incorporates a Loader Configuration Module to regulate the number of I/O processes. Evaluated with two representative utilities—data deduplication profiling and data augmentation—SwiftLoad achieved performance improvements of up to 5.63x and 11.0x, respectively, on a production supercomputer.

HPC↗

DOE OSTI2020

One Structure, Two Elements—LuGe 2 Superconductor vs Ordinary Metallic Conductor LuSn 2 . A Case Study on How Site-Selective Germanium for Tin Atom Substitution Leads to Modulating of the Charge Distribution

The substitution of chemically similar elements in a given crystal structure is an effective way to enhance physical properties, but the understanding on such improvements is usually impeded because the substitutions are random, and the roles of the different atoms cannot be distinguished by crystallographic symmetry. Herein, we provide a detailed crystallographic analysis and property measurements for the continuous solid solutions LuGe x Sn 2–x (0 < x < 2). The results show that there is no apparent change of the global symmetry, with the end-members LuGe 2 and LuSn 2 , as well as the intermediate LuGe x Sn 2–x compositions adopting the ZrSi 2 type structure (space group Cmcm, Pearson index oC12). Yet, the refinements of the crystal structures from single-crystal X-ray diffraction data show that Ge–Sn atom substitutions are not random, but occur preferentially at the zig-zag chain. The patterned distribution of two group 14 elements leads to a significant variation in chemical bonding and charge ordering within the other structural fragment, the 2D square nets, thereby resulting in tuned electron transport. The enhancement is greater than the typical Bloch-Gruneisen model, and more akin to the parallel-resistor model. Magnetization measurements on single crystals show bulk superconductivity in all LuGe x Sn 2–x samples with shielding fractions as high as 90%. Specific heat data confirm the effect to originate from residual metallic tin in the material, indicating that Sn atom substitutions in the 2D square nets cause disruptions of the hypervalent bonding and local anisotropy, which ultimately leads to vanishing of the superconducting state in the end-member LuGe 2 . This work sheds light on how the complexity in chemical interactions by two different carbon congeners leads to changes in the physical properties and how they can be correlated with the induced charge distribution. Furthermore, these studies also provide a general approach to modulation of charge density, and thus, of emerging physical properties in other classes of intermetallic systems based on the main-group elements of groups 13 to 15.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Composite Analysis Vadose Zone Transport of Selected Radionuclides Released from DOE O 435.1 Sources.

The main objectives of the composite analysis (CA) compliance case vadose zone (VZ) facet are to simulate transport of radionuclide releases from the surface to the water table, and to provide radionuclide transfer rates to groundwater for inclusion into the Plateau-to-River (P2R) saturated zone (SZ) model (CP-57037, Model Package Report: Plateau to River Groundwater Model, Version 8.3). The parallel exascale version of the Subsurface Transport Over Multiple Phases (eSTOMP1) simulator is used to simulate flow and transport for the CA VZ models. The CA compliance case approach to address the scale and distribution of contaminant sources in the VZ facet is to subdivide the Hanford Site Central Plateau into 26 models that contain contaminant sources and liquid discharges likely to commingle during migration through the VZ to the water table.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2022

Composite Analysis Vadose Zone Transport of Selected Hanford Site Composite Analysis: Vadose Zone Transport of Selected Radionuclides Released from DOE O 435.1 Waste Sites

The main objectives of the composite analysis (CA) compliance case vadose zone (VZ) facet are to simulate transport of radionuclide releases from the surface to the water table, and to provide radionuclide transfer rates to groundwater for inclusion into the Plateau-to-River (P2R) saturated zone (SZ) model (CP-57037, Model Package Report: Plateau to River Groundwater Model, Version 8.3). The parallel exascale version of the Subsurface Transport Over Multiple Phases (eSTOMP) simulator is used to simulate flow and transport for the CA VZ models. The CA compliance case approach to address the scale and distribution of contaminant sources in the VZ facet is to subdivide the Hanford Site Central Plateau into 26 models that contain contaminant sources and liquid discharges likely to commingle during migration through the VZ to the water table.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2021

Device and method to manipulate ions in multi level system

An apparatus includes multiple levels of ion transport channels, with successive levels coupled by elevator channels. Efficient three dimensional packing provides long path lengths in practical volumes for ion mobility separation with high resolving power. Disclosed elevator configurations provide efficient routing of ion transport channels across levels with low ion loss, enabling ion mobility separation over 100 levels or more. Elevator configurations include (i) opposed traveling waves meeting at an elevator entrance, (ii) external elevator with a wrap-around electrode bank, (iii) external elevator with electrode banks on parallel extension plates, or (iv) elevator operating in surfing mode, in various combinations. Manufacture is aided by printed wiring boards, with interchangeable boards. Assembly with motherboard, spacer block(s), and alignment pins provides efficient distribution of electrode excitations and accurate reproducible positioning.

Ibrahim, Yehia M.↗

DOE OSTI2023

Device and method to manipulate ions in multi-level system

Ibrahim, Yehia M.↗

DOE OSTI2020

Evaluation of a pair-based, joint-likelihood association approach for regional infrasound event identification

SUMMARY A Bayesian framework for the association of infrasonic detections is presented and evaluated for analysis at regional propagation scales. A pair-based, joint-likelihood association approach is developed that identifies events by computing the probability that individual detection pairs are attributable to a hypothetical common source and applying hierarchical clustering to identify events from the pair-based analysis. The framework is based on a Bayesian formulation introduced for infrasonic source localization and utilizes the propagation models developed for that application with modifications to improve the numerical efficiency of the analysis. Clustering analysis is completed using hierarchical analysis via weighted linkage for a non-Euclidean distance matrix defined by the negative log-joint-likelihood values. The method is evaluated using regional synthetic data with propagation distances of hundreds of kilometres in order to study the sensitivity of the method to uncertainties and errors in backazimuth and time of arrival. The method is found to be robust and stable for typical uncertainties, able to effectively distinguish noise detections within the data set from those in events, and can be made numerically efficient due to its ease of parallelization.

58 GEOSCIENCES↗

DOE OSTI2022

Common Information Model for Electromagnetic Transients (CIM for EMT): CRADA 533 [Abstract only}

The control and protection functions of inverter-based resources (IBR) have raised concerns with bulk system reliability. Most of the current interest lies with solar photovoltaic generation but increasing amounts of storage would pose the same risks. Newer North American Electric Reliability Corporation (NERC) guidelines call for electromagnetic transient (EMT) studies of IBR and recommend that transmission operators collect distributed energy resource (DER) data to support such modeling. IEEE Standard P2800.1 is defining tests for model parameterization, so good model data should become available from inverter vendors. (EMT studies also apply to large power transformer reliability, and transformer vendors can provide EMT models.) Utilities don’t currently have the rest of the bulk system represented for EMT studies at large scale. An International Electrotechnical Commission (IEC) standard Common Information Model (CIM) provides a way of supporting these detailed models from physical asset data, e.g., conductors, towers, transformer data sheets, control block diagrams, while avoiding software vendor lock-in. CIM-for-EMT, with proposed schema extensions and open-source converters, provides a way to exchange EMT data between organizations and tools. This project leverages Office of Electricity (OE) funding of CIM-for-EMT code base through the GridAPPS-DTM project, and of GridPACKTM (parallelized transmission solver), for interoperability testing in CIM-for-EMT. The project also leverages partner PGSTech investments in EMTP® interoperability with CIM.

24 POWER TRANSMISSION AND DISTRIBUTION↗