Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “dioxide”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Absolute integrated intensity for the nu-1 sulfur dioxide band

The absolute integrated intensity of the IR vibration-rotation nu-1 SO2 band was measured using the linear portion of the curve of growth. Infrared spectroscopic-absorption cell measurements were performed on sulfur dioxide at partial pressures less than 0.15 torr with nitrogen added to give a total pressure of 705 torr, the path length being 4 mm. The absolute integrated intensity was determined to be 112.0 plus or minus 2.6/cm/sq (atm cm) at 296 K at the 95% confidence level.

Pilon, P. J.↗
NASA NTRS1977

The NASA high-power carbon dioxide laser - A versatile tool for laser applications

The NASA Lewis Research Center has designed and fabricated a closed-cycle, continuous wave (CW), carbon dioxide (CO2) high-power laser to support research for the identification and evaluation of possible high-power laser applications. The device is designed to generate up to 70 kW of laser power in annular-shape beams from 1 to 9 cm in diameter. Electric discharge, either self-sustained or electron-beam-sustained, is used for excitation. This laser facility can be used in two ways. First, it provides a versatile tool on which research can be performed to advance the state-of-the-art technology of high-power CO2 lasers in such areas as electric excitation, laser chemistry, and quality of output beams, all of which are important whether the laser application is government or industry oriented. Second, the facility provides a well-defined, continuous wave beam for various application experiments, such as propulsion, power conversion, and materials processing.

Lancashire, R. B.↗
NASA NTRS1977

Effect of sulfur dioxide on Swiss albino mice

Times to incapacitation and death and LC50 values were determined for male Swiss albino mice exposed to different concentrations of sulfur dioxide in a 4.2 liter hemispherical chamber. The LC50 for a 30 minute exposure was about 3000 ppm SO2.

Hilado, C. J.↗
NASA NTRS1977

Effect of nitrogen dioxide on Swiss albino mice

Times to incapacitation and death and LC50 values were determined for male Swiss albino mice exposed to different concentrations of nitrogen dioxide in a 4.2 liter hemispherical chamber. The LC50 for a 10 minute exposure was about 1000 ppm NO2.

Hilado, C. J.↗
NASA NTRS1977

Photocatalytic oxidation mechanism of alkanes in contact with titanium dioxide

Isobutane was photooxidized on titanium dioxide between -16 and +180 C in tertiary butanol and acetone. The formation of tertiary butanol preceded the formation of acetone. Above 20 C the latter compound became clearly predominant. The reaction kinetics obeyed a steady state model of oxygen chemisorption with the involvement of isobutane in the physisorbed phase.

Formenti, M.↗
NASA NTRS1977

Electrophoresis pattern of serum from mice exposed to different concentrations of sulfur dioxide

Three day old mice were continuously exposed to sulphur dioxide concentrations at 0ppm, 0.05ppm, 0.15ppm and 1ppm for eight weeks. At the end of the experiment, blood samples were collected and centrifuged for electrophoresis studies of the serum in 5 percent acrylamide gel. The length of bands of different serum proteins from the SO2 exposed mice was at a variance as compared with the length of bands from the control exposed mice and alpha-1 band seems to be missing from the serum of SO2 exposed mice.

Singh, J.↗
NASA NTRS1979

Carbon dioxide electrolysis using a ceramic electrolyte

This paper discusses the results of an experimental study of the electrical aspects of carbon dioxide electrolysis using a ceramic electrolyte. The electrolyte compositions used in this study are 8% Y2O3 stabilized ZrO2, 7.5% CaO stabilized ZrO2, and 5% Y2O3 stabilized ThO2. Results indicate that the 8% Y2O3 stabilized ZrO2 is the best material to use for electrolysis, in terms of current as a function of voltage and temperature, and in terms of efficiency of oxide ion flow through it. The poorest results were obtained with the 5% Y2O3 stabilized ThO2 composition. An electrolysis system which might be employed to reclaim oxygen and carbon from effluents of space manufacturing, assuming that an industry would have to electrolyze 258,000 tonnes of CO2 per year, is predicted to require a total cell area of 110,000 sq m of 1 mm thickness and electrical capacity of 441 MW.

Erstfeld, T. E.↗
NASA NTRS1979

Sulfur dioxide in the Venus atmosphere - Distribution and implications

The Pioneer Venus Orbiter ultraviolet spectrometer sees variable disk brightness features similar to the well-known 'UV markings' seen at longer wavelengths. The bright features are consistent with a homogeneous cloud of H2SO4 aerosols. The darker features show the presence of a broad-band absorber, which is at some depth in the cloud layer. Additional contrast arises from SO2 absorption. The observed strength of the SO2 absorption as a function of wavelength rules out a uniform mixing ratio for the SO2. The data are well fitted by an inhomogeneous light scattering model in which the SO2 scale height is one-fifth of the CO2 scale height, and the mixing ratio of SO2 at 40 mb is 10 to the -7th. A model of the oxidation of sulfur dioxide in the upper cloud reproduces the observed vertical distribution of SO2 and indicates that SO2 alone is sufficient to produce the observed amount of H2SO4 in this region.

Esposito, L. W.↗
NASA NTRS1979

IUE detection of sulfur dioxide in the atmosphere of Venus

Ultraviolet absorption bands of sulfur dioxide have been detected in the reflectance spectrum of Venus using the high resolution spectrometer of the International Ultraviolet Explorer (IUE). The identification of these bands in the 2080 to 2180 A range has been verified by comparison with laboratory absorption spectra. An estimate of the SO2 vertical column density using a reflecting layer model is 4 x 10 to the 16th sq cm.

Conway, R. R.↗
NASA NTRS1980

Nitrogen dioxide vapor penetration of chlorobutyl rubber SCAPE under operational conditions

Operational self contained atmospheric protective ensembles (SCAPE suits) and fabric from the suits were subjected to a series of tests designed to determine the amount of exposure a wearer of the suit would receive if a spill of the hypergolic oxidizer nitrogen tetroxide (N2O4) should occur nearby. The results of these tests show that a wearer of a "stock" SCAPE suit equipped with a standard liquid air pack, if exposed to a spill resulting in a 26 percent increase of oxidizer in the surrounding atmosphere, will experiment no detectable concentration of nitrogen dioxide (NO2) inside the suit for 15 minutes. Thereafter, the NO2 concentration within the suit will increase for 35 minutes at a rate of 0.07 ppm per minute and then at a gradually decreasing rate until an equilibrium concentration of 3.4 ppm is attained after 100 minutes. Momentary increases of as much as 1.6 ppm can be expected if the wearer were to rise quickly from a squatting position, but the additional NO2 would be dissipated within three minutes. The effect of liquid and vapor N2O4 and of liquid monomethylhydrazine on permeation rates and tensile strength of the SCAPE suit fabric was also investigated.

Schehl, T. A.↗
NASA NTRS1980

Carbon dioxide measurements in the stratosphere

A mass spectrometer experiment for the analysis of minor constituents in the stratosphere has been flown successfully four times from Palestine, Texas on board a balloon gondola. The carbon dioxide mixing ratio, which shows unexpectedly large variations in the stratosphere, reached 400 ppm in one particular night flight. This is about 20% higher than the ground value. Evidence is presented that the experiment performed well during each of the balloon flights. The isotopic ratio C-12/C-13 was measured and found in good agreement with previous air analyses showing a depletion of C-13.

Mauersberger, K.↗
NASA NTRS1980

Titanium dioxide antireflection coating for silicon solar cells by spray deposition

A high-speed production process is described for depositing a single-layer, quarter-wavelength thick antireflection coating of titanium dioxide on metal-patterned single-crystal silicon solar cells for terrestrial applications. Controlled atomization spraying of an organotitanium solution was selected as the most cost-effective method of film deposition using commercial automated equipment. The optimal composition consists of titanium isopropoxide as the titanium source, n-butyl acetate as the diluent solvent, sec-butanol as the leveling agent, and 2-ethyl-1-hexanol to render the material uniformly depositable. Application of the process to the coating of circular, large-diameter solar cells with either screen-printed silver metallization or with vacuum-evaporated Ti/Pd/Ag metallization showed increases of over 40% in the electrical conversion efficiency. Optical characteristics, corrosion resistance, and several other important properties of the spray-deposited film are reported. Experimental evidence indicates a wide tolerance in the coating thickness upon the overall efficiency of the cell. Considerations pertaining to the optimization of AR coatings in general are discussed, and a comprehensive critical survey of the literature is presented.

Kern, W.↗
NASA NTRS1981

Discovery of natural gain amplification in the 10-micrometer carbon dioxide laser bands on Mars - A natural laser

Fully resolved intensity profiles of various lines in the carbon dioxide band at 10.4 micrometers have been measured on Mars with an infrared heterodyne spectrometer. Analysis of the line shapes shows that the Mars atmosphere exhibits positive gain in these lines. The detection of natural optical gain amplification enables identification of these lines as a definite natural laser.

Mumma, M. J.↗
NASA NTRS1981

Sulfur dioxide and other cloud-related gases as the source of the microwave opacity of the middle atmosphere of Venus

Spacecraft radio occultation measurements imply the presence of a nonuniformly mixed gaseous absorber within, but mostly below, the main cloud layer of sulfuric acid-water droplets measured by Pioneer-Venus. Preliminary considerations of the amount, distribution, and effects of sulfur dioxide and other gases, which apparently are associated with and produce the cloud, indicate that they constitute an important, and probably the predominant, source of the observed microwave opacity of the middle atmosphere of Venus.

Steffes, P. G.↗
NASA NTRS1982

An investigation of adhesive/adherend and fiber/matrix interactions. Part A: Surface characterization of titanium dioxide, titantium and titanium 6% Al to 4% V powders: Interaction with water, hydrogen chloride and polymers

The titanium dioxide surface is discussed. Polymer adhesive are also discussed. Titanium powders are considered. Characterization techniques are also considered. Interactions with polymers, water vapor, and HCl are reported. Adsorbents are characterized.

Siriwardane, R. V.↗
NASA NTRS1982

Increased atmospheric carbon dioxide and climate feedback mechanisms

As a consequence of fossil fuel burning, the atmospheric concentration of carbon dioxide has increased from 314 ppm in 1958, when detailed measurements of this quantity began, to a present value of 335 ppm; and it is estimated that during the next century, the CO2 concentration will double relative to its assumed preindustrial value of 290 ppm. Since CO2 is an infrared-active gas, increases in its atmospheric concentration would lead to a larger infrared opacity for the atmospheric which, by normal logic, would result in a warmer Earth. A number of modeling endeavors suggest a 2 to 4 C increase in global mean surface temperature with doubling of the CO2 concentration. But such estimates of CO2-induced warming are highly uncertain because of a lack of knowledge of climate feedback mechanisms. Interactive influences upon the solar and infrared opacities of the Earth-atmosphere system can either amplify or damp a climate-forcing mechanism such as increasing CO2. Climate feedback mechanisms discussed include climate sensitivity, cloudiness-radiation feedback, climate change predictions, and interactive atmospheric chemistry.

Cess, R. D.↗
NASA NTRS1982

The importance of ozone in the oxidation of sulfur dioxide in nonurban tropospheric clouds

In studies of the various possible mechanisms which contribute to the conversion of atmospheric sulfur dioxide to sulfate aerosol in the atmosphere, oxidation within the aqueous, droplet phase of tropospheric clouds has been identified as a major contributor. It has appeared that possibly much of this oxidation is by hydrogen peroxide, with the contribution from ozone being only minimal. The present investigation is concerned with the relative importance of O3 and H2O2 oxidation as a function of pH. The results of a new experimental study of the O3-S(IV) reaction in aqueous solution are presented, and potential S(IV) oxidation rates by O3 in cloud water are compared with those predicted for H2O2. The investigation indicates the potential importance of O3 as a contributor to the overall oxidative conversion of SO2 within typical nonpolluted tropospheric clouds.

Maahs, H. G.↗
NASA NTRS1982

Lithium/sulfur dioxide cell and battery safety

The new high-energy lithium/sulfur dioxide primary electrochemical cell, having a number of advantages, has received considerable attention as a power source in the past few years. With greater experience and improved design by the manufacturers, this system can be used in a safe manner provided the guidelines for use and safety precautions described herein are followed. In addition to a description of cell design and appropriate definitions, there is a safety precautions checklist provided to guide the user. Specific safety procedures for marking, handling, transportation, and disposal are also given, as is a suggested series of tests, to assure manufacturer conformance to requirements.

Halpert, G.↗