Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “diffusion maps”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Seasonal variability of the OH Meinel bands

The influence of seasonal and latitudinal changes in the distribution of mesospheric components on the OH Meinel-band nightglow is investigated by means of numerical simulations using the two-dimensional dynamical/chemical model of Garcia and Solomon (1985). The processes responsible for the formation and destruction of vibrationally excited OH in the mesosphere are described; the seasonal/latitudinal evolution for the higher (v greater than 6) and lower (v = 1-6) levels is shown in graphs and maps and characterized in detail; and the theoretical results are compared with published observational data. The lower-level emission is shown to depend on both O and H, suggesting that the variation of the Meinel-band nightglow can provide important information on the roles of advection and diffusion in the transport of water vapor and odd oxygen near the mesopause.

Le Texier, H.↗
NASA NTRS1998

An Assessment of the Axial and Radial Dilation of a DPIMS Tantalum Cartridge for Space Shuttle Flight Experiments

Ground-based heat treatment tests are planned on an argon gas-filled tantalum cartridge developed as pan of a Diffusion Processes in Molten Semiconductors (DPIMS) experiment conducted on NASA's Space Shuttle. The possibility that the cartridge may creep during testing and touch the furnace walls is of real concern in this program. The present paper discusses the results of calculations performed to evaluate this possibility. Deformation mechanism maps were constructed using literature data in order to identify the creep mechanism dominant under the appropriate stresses and temperatures corresponding to the test conditions. These results showed that power-law creep was dominant when the grain size of the material exceeded 55 gm but Coble creep was the important mechanism below this value of grain size. Finite element analysis was used to analyze the heat treatment tWs assuming a furnace run away condition (which is a worst case scenario) using the appropriate creep parameters corresponding to grain sizes of 1 and 100 gm. Calculations were also conducted to simulate the effect of an initial 3 tilt of the cartridge assembly, the maximum possible tilt angle. The von Mises stress and su-ain distributions were calculated assuming that the cartridge was fixed at one end as it was heated from ambient temperature to 1823 K in 1.42 h, maintained at 1823 K for 9.5 h and then further heated to an over temperature condition of 2028 K in 0.3 h. The inelastic axial and radial displacements of the cartridge walls were evaluated by resolving the von Mises strain along the corresponding directions. These calculations reveal that the maximum axial and radial displacements are expected to be about 2.9 and 0.25 mm, respectively, for both fine and coarse-grained materials at 2028 K. It was determined that these displacements occur during heat-up to temperature and creep of the cartridge is likely to be relatively insignificant irrespective of grain size. Furthermore, with a 3' tilt of the cartridge, the deflection is increased by only 0.39 gm which is negligible. Since the gap between the furnace heating elements and the cartridge is about 7.5 mm and less than the maximum radial dilation of 0.25 mm at 2028 K, it is concluded that the cartridge is unlikely to touch the furnace walls during the experiments.

Raj, S.V.↗
NASA NTRS2000

The Sensitivity of Model Ozone to Advective and Photochemical Processes in the High Latitude Winter Lower Stratosphere

Three dimensional chemistry and transport models (CTMs) contain a set of coupled continuity equations which describe the evolution of constituents such as ozone and other minor species which affect ozone. Both advection and photochemical processes contribute to constituent evolution, and a CTM provides a means to evaluate these contributions separately. Such evaluation is particularly useful when both terms are important to the modeled tendency. An example is the ozone tendency in the high latitude winter lower stratosphere, where advection tends to increase ozone, and catalytic processes involving chlorine radicals tend to decrease ozone. The Goddard three dimensional chemistry and transport model uses meteorological fields from the Goddard Earth Observing System Data Assimilation System, thus the modeled ozone evolution may reproduce the observed evolution and provide a test of the model representation of photochemical processes if the transport is shown to be modeled appropriately. We have investigated the model advection further using diabatic trajectory calculations. For long lived constituents such as N2O, the model field for a particular time on a potential temperature surface is compared with a field produced by calculating 15 day back trajectories for a fixed latitude longitude grid, and mapping model N2O at the terminus of the back trajectories onto the initial grid. This provides a quantitative means to evaluate two aspects of the CTM transport: one, the model horizontal gradient between middle latitudes and the polar vortex is compared with the gradient produced using the non-diffusive trajectory calculation; two, the model vertical advection, which is produced by the divergence of the horizontal winds, is compared with the vertical transport expected from diabatic cooling.

Douglass, A.↗
NASA NTRS1998

Dark Matter and Extragalactic Gas Clouds in the NGC 4532/DDO 137 System

H I synthesis mapping of NGC 4532 and DDO 137, a pair of Sm galaxies on the edge of the Virgo cluster, is used to determine rotation curves for each of the galaxies and to resolve the structure and kinematics of three extragalactic H I clouds embedded in an extended envelope of diffuse HI discovered in earlier Arecibo studies of the system.

Dark Matter Extragalactic Gas Clouds mappinig↗
DOE OSTI2020

Analysis of RF losses and material characterization of samples removed from a Nb 3 Sn-coated superconducting RF cavity

Nb 3 Sn (T c ≈18 K and H sh ≈400 mT) is a prospective material to replace Nb (T c ≈9 K and H sh ≈200 mT) in SRF accelerator cavities for significant cost reduction and performance enhancement. Because of its material properties, Nb3Sn is best employed as a thin film (coating) inside an already built RF cavity structure. A particular test cavity noted as C3C4 was a 1.5 GHz single-cell Nb cavity, coated with Nb3Sn using Sn vapor diffusion process at Jefferson Lab. Cold measurements of the coated cavity indicated the superconducting transition temperature of about 18 K. Subsequent RF measurements indicated field-dependent surface resistance both at 4.3 K and 2.0 K. After initial cold measurements, the cavity RF loss distribution was studied with a thermometry mapping system. Loss regions were identified with thermometry and were cut out for material analysis. The presence of significantly thin patchy regions and other carbon-rich defects is associated with strong local field-dependent surface resistance. This paper summarizes RF and thermometry results correlated with material science findings.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Temperature-induced degradation of GaN HEMT: An in situ heating study

High-power electronics, such as GaN high electron mobility transistors (HEMTs), are expected to perform reliably in high-temperature conditions. This study aims to gain an understanding of the microscopic origin of both material and device vulnerabilities to high temperatures by real-time monitoring of the onset of structural degradation under varying temperature conditions. This is achieved by operating GaN HEMT devices in situ inside a transmission electron microscope (TEM). Electron-transparent specimens are prepared from a bulk device and heated up to 800 °C. High-resolution TEM (HRTEM), scanning TEM (STEM), energy-dispersive x-ray spectroscopy (EDS), and geometric phase analysis (GPA) are performed to evaluate crystal quality, material diffusion, and strain propagation in the sample before and after heating. Gate contact area reduction is visible from 470 °C accompanied by Ni/Au intermixing near the gate/AlGaN interface. Elevated temperatures induce significant out-of-plane lattice expansion at the SiNx/GaN/AlGaN interface, as revealed by geometry-phase GPA strain maps, while in-plane strains remain relatively consistent. Exposure to temperatures exceeding 500 °C leads to almost two orders of magnitude increase in leakage current in bulk devices in this study, which complements the results from our TEM experiment. The findings of this study offer real-time visual insights into identifying the initial location of degradation and highlight the impact of temperature on the bulk device’s structure, electrical properties, and material degradation.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Mo Atom Rearrangement Drives Layer-Dependent Reactivity in Two-Dimensional MoS 2

Two-dimensional (2D) materials offer a valuable platform for manipulating and studying chemical reactions at the atomic level, owing to the ease of controlling their microscopic structure at the nanometer scale. While extensive research has been conducted on the structure-dependent chemical activity of 2D materials, the influence of structural transformation during the reaction has remained largely unexplored. In this work, we report the layer-dependent chemical reactivity of MoS 2 during a nitridation atomic substitution reaction and attribute it to the rearrangement of Mo atoms. Our results show that the chemical reactivity of MoS 2 decreases as the number of layers is reduced in the few-layer regime. In particular, monolayer MoS 2 exhibits significantly lower reactivity compared with its few-layer and multilayer counterparts. Atomic-resolution transmission electron microscopy (TEM) reveals that MoN nanonetworks form as reaction products from monolayer and bilayer MoS 2 , with the continuity of the MoN crystals increasing with layer number, consistent with the local conductivity mapping data. The layer-dependent reactivity is attributed to the relative stability of the hypothetically formed MoN phase, which retains the number of Mo atomic layers present in the precursor. Specifically, the low chemical reactivity of monolayer MoS 2 is attributed to the high energy cost associated with Mo atom diffusion and migration necessary to form multilayer Mo lattices in the thermodynamically stable MoN phase. In conclusion, this study underscores the critical role of lattice rearrangement in governing chemical reactivity and highlights the potential of 2D materials as versatile platforms for advancing the understanding of materials chemistry at the atomic scale.

Chemical reactivity↗
DOE OSTI2024

Fast photodiode arrays for high frequency fluctuation measurements of reconnecting flux ropes

An array of compact, high-bandwidth (>200 MHz) and low-cost optical photodiodes has been developed and implemented on the PHASe MApping (PHASMA) experiment. Using purpose-built electronics, an array of 16 photodetectors was constructed and used to monitor broadband (1–5 MHz) fluctuations in light intensity emitted by flux ropes undergoing electron-only magnetic reconnection. These measurements reveal a swath of oscillatory behavior, including wave propagation inward toward the diffusion region at approximately the local electron Alfvén speed. Custom 3D-printed collection optics and mounting hardware allow quick reconfiguration of the array for radial or axial measurements. The electronics design is flexible enough to be used with other current-sourcing transducers, such as avalanche photodiodes; silicon photomultipliers; and infrared, x-ray, and UV photodiodes. A noise-rejecting electrical layout allows for low-noise operation close to pulsed plasma discharges. A 16-channel, 64-pixel tomographic array was constructed and initial reconstructions are presented.

Instruments & Instrumentation↗
DOE OSTI2022

Magnetic fields in the formation of the first stars – II. Results

ABSTRACT Beginning with cosmological initial conditions at z = 100, we simulate the effects of magnetic fields on the formation of Population III stars and compare our results with the predictions of Paper I. We use gadget-2 to follow the evolution of the system while the field is weak. We introduce a new method for treating kinematic fields by tracking the evolution of the deformation tensor. The growth rate in this stage of the simulation is lower than expected for diffuse astrophysical plasmas, which have a very low resistivity (high magnetic Prandtl number); we attribute this to the large numerical resistivity in simulations, corresponding to a magnetic Prandtl number of order unity. When the magnetic field begins to be dynamically significant in the core of the minihalo at z = 27, we map it on to a uniform grid and follow the evolution in an adaptive mesh refinement, MHD simulation in orion2. The non-linear evolution of the field in the orion2 simulation violates flux-freezing and is consistent with the theory proposed by Xu & Lazarian. The fields approach equipartition with kinetic energy at densities ∼1010–1012 cm−3. When the same calculation is carried out in orion2 with no magnetic fields, several protostars form, ranging in mass from ∼1 to 30 M⊙; with magnetic fields, only a single ∼30 M⊙ protostar forms by the end of the simulation. Magnetic fields thus suppress the formation of low-mass Pop III stars, yielding a top-heavy Pop III initial mass function and contributing to the absence of observed Pop III stars.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1982

Infrared observations of the Uranian rings

Maps of the Uranian rings at 2.2 microns and spectrophotometric observations covering 2.0 to 2.4 and 2.9 to 3.9 microns are discussed. The maps reveal a 2:1 azimuthal brightness variation whose amplitude and phase are consistent with the width variation and apsidal precession of the epsilon ring. Comparison with models based on stellar occultation data leads to an upper limit of 0.01 on the normal optical depth of any broad (5000 km wide), diffuse component of the ring system. A significant east-west asymmetry, corresponding to a brightening of the near side of the rings relative to the far side, is unexplained. The spectrum of the rings is flat over the range 2.1 to 3.9 microns. There is no spectroscopic evidence for the presence of H2O.

Nicholson, P. D.↗
NASA NTRS1997

Diffuse Reflectance Mid-Infrared Spectroscopy as a Tool for the Identification of Surface Contamination on Sandblasted Metals

The SOC 400 Surface Inspection Machine/Infrared (SIMIR) is a small, ruggedized Fourier transform infrared spectrometer having dedicated diffuse reflectance optics. The SOC 400 was designed for the purpose of detecting (qualitatively and quantitatively) oil stains on the inside surface of solid rocket motor casings in the as-sandblasted and cleaned condition at levels approaching 1 mg. sq ft. The performance of this instrument is described using spectral mapping techniques.

G. Louis Powell↗
DOE OSTI2020

Growth and Properties of Vapor Diffused Nb3Sn Coating for Superconducting Radiofrequency Accelerator Cavity Applications

The desire to reduce construction and operating costs of future SRF accelerators motivates the search for higher-performing alternative materials. Nb3Sn (Tc ~ 18.3 K and Hsh ~ 425 mT) is the front runner. The tin vapor diffusion process is currently the technique of choice to produce promising Nb3Sn-coated cavities. Understanding Nb3Sn nucleation and growth in this process is essential to progress. Samples representing different stages of Nb3Sn formation have been produced and studied to elucidate the effects of nucleation, growth, process conditions, and impurities. Nb3Sn films with thickness from a few hundred nm up to ~15 µm were grown and characterized. The microscopic examination of samples suggests the mechanisms of thin film nucleation and growth. Broadly, nucleation deposits tin as a thin surface phase and, under some conditions, a few hundred nanometer sized particles as well. Conditions that impair nucleation promote the formation of defects, such as ?patches?, in subsequent coating growth. Analysis of coated samples is consistent with the model of Nb3Sn grown in which tin diffuses via grain boundaries to Nb3Sn-Nb interface, where the growth Nb3Sn into the niobium bulk takes place. Similar scaling laws are found for grain growth and layer thickness. Non-parabolic layer growth is consistent with significant grain growth, which reduces the number of Sn-transport channels. Examination of patchy region in Nb3Sn coating revealed it to be large single crystalline grains, pointing to impeded Nb3Sn layer growth due to low grain boundary density, resulting in a significantly thin coating in those areas. Examination of RF loss regions from a coated cavity, identified with a thermometry mapping system showed patchy regions and carbonus defects were associated with strong local field-dependent surface resistance. RF measurements of coated cavities were combined with material characterization of witness samples and coated-cavity cutouts to improve the coating process. Understanding obtained and applied to cavity coatings, resulted in single-cell Nb3Sn cavities with a quality factor of ~2 ×1010 up to 15 MV/m accelerating gradient at 4 K, without "Wuppertal" Q-slope. We have also produced Nb3Sn-coated CEBAF 5-cell cavities with accelerating gradients useful for accelerator cryomodules. This dissertation will discuss the genesis of the Nb3Sn coating in a typical tin vapor diffusion process, effects of different process parameters, and its consequences to the coating of single-cell and multi-cell SRF cavities.

Pudasaini, Uttar↗
NASA NTRS1981

Spatial imaging of UV emission from Jupiter and Saturn

Spatial imaging with the IUE is accomplished both by moving one of the apertures in a series of exposures and within the large aperture in a single exposure. The image of the field of view subtended by the large aperture is focussed directly onto the detector camera face at each wavelength; since the spatial resolution of the instrument is 5 to 6 arc sec and the aperture extends 23.0 by 10.3 arc sec, imaging both parallel and perpendicular to dispersion is possible in a single exposure. The correction for the sensitivity variation along the slit at 1216 A is obtained from exposures of diffuse geocoronal H Ly alpha emission. The relative size of the aperture superimposed on the apparent discs of Jupiter and Saturn in typical observation is illustrated. By moving the planet image 10 to 20 arc sec along the major axis of the aperture (which is constrained to point roughly north-south) maps of the discs of these planets are obtained with 6 arc sec spatial resolution.

Clarke, J. T.↗
NASA NTRS1990

Bipolar supernova remnants and the obliquity dependence of shock acceleration

The diffusive shock acceleration mechanism proposed to explain the bipolarity observed in the synchrotron radio emission of young adiabatically expanding shell SNRs is investigated by means of numerical simulations. The theoretical basis of the SNR models and the numerical computation methods are explained, and the results are presented in graphs and synthetic radio maps and discussed in detail. It is found that the efficiency of the acceleration process depends on the obliquity angle theta(Bn) between the shock normal and the uniform magnetic field: models with theta(Bn) of about 90 deg can reproduce the observed azimuthal intensity ratios in most cases, but models with theta(Bn) near 0 deg cannot.

Fulbright, Michael S.↗
NASA NTRS1994

Soft X-ray and H I surveys of the low N(sub H) region in Ursa Major

A region of almost 300 deg squared in Ursa Major around the direction of the lowest neutral hydrogen column density in the sky has been surveyed in the 1/4 keV X-ray band (approximately 0.12 to 0.284 keV at 10% of the peak response) using the ROSAT position sensitive proportional counter (PSPC) and has been fully mapped in the 21 cm line of neutral hydrogen with an angular resolution of 21' or better. We present maps of these two data sets and an analysis of the spatial correlation between them. Over the entire field, the 1/4 keV band X-ray count rate shows a strong negative correlation with the column density of Galactic neutral hydrogen. We discuss the local, extragalactic, and halo contributions to the observed diffuse X-ray intensity and derive an upper limit to the Galactic X-ray emission originating beyond this H I distribution that is more than a factor of 7 smaller than the inferred flux beyond the Draco nebula, an apparent halo object located approximately 41 degs away. This implies that while there may be significant amounts of hot gas in the Galactic halo, its properties must vary strongly across the sky.

Snowden, S. L.↗
NASA NTRS2003

[Results of Simulation Studies]

Lattice Monte Carlo and off-lattice molecular dynamics simulations of h(sub 1)t(sub 4) and h(sub 4)t(sub l) (head/tail) amphiphile solutions have been performed as a function of surfactant concentration and temperature. The lattice and off-lattice systems exhibit quite different self-assembly behavior at equivalent thermodynamic conditions. We found that in the weakly aggregating regime (no preferred-size micelles), all models yield similar micelle size distributions at the same average aggregation number, albeit at different thermodynamic conditions (temperatures). In the strongly aggregating regime, this mapping between models (through temperature adjustment) fails, and the models exhibit qualitatively different micellization behavior. Incipient micellization in a model self-associating telechelic polymer solution results in a network with a transient elastic response that decays by a two-step relaxation: the first is due to a heterogeneous jump-diffusion process involving entrapment of end-groups within well-defined clusters and this is followed by rapid diffusion to neighboring clusters and a decay (terminal relaxation) due to cluster disintegration. The viscoelastic response of the solution manifests characteristics of a glass transition and entangled polymer network.

Source record↗
NASA NTRSDate not supplied

Evolution of Dendritic Extended 3D Patterns during Directional Solidification: Microgravity Experiments in DECLIC-DSI onboard ISS and Phase-field Modeling

To characterize the dynamical formation of three-dimensional (3D) arrays of dendrites under diffusive growth conditions, in situ monitoring of a series of experiments on a transparent succinonitrile – 0.46 wt% camphor model alloy was carried out under low gravity in the DECLIC Directional Solidification Insert onboard the International Space Station. These experiments offer continuous interface observation and enable the construction of space-time evolution maps of dendrite location and primary spacing during directional solidification. We present the evolution of dendritic extended 3D patterns for a large range of parameters displaying different levels of side branching in both experiments and phase-field simulations. The combined and separate effects of macroscopic interface curvature and crystal mis-orientation are evidenced and detailed. In addition, the aligned dendritic array caused by the invasion of dendrites formed at the edge of the crucible border is investigated.

Kaihua Ji↗
NASA NTRS2014

Interstellar Organics, the Solar Nebula, and Saturn's Satellite Phoebe

The diffuse interstellar medium inventory of organic material (Pendleton et al. 1994, Pendleton Allamandola 2002) was likely incorporated into the molecular cloud in which the solar nebula condensed. This provided the feedstock for the formation of the Sun, major planets, and the smaller icy bodies in the region outside Neptune's orbit (transneptunian objects, or TNOs). Saturn's satellites Phoebe, Iapetus, and Hyperion open a window to the composition of one class of TNO as revealed by the near-infrared mapping spectrometer (VIMS - Visible and Infrared Mapping Spectrometer) on the Cassini spacecraft at Saturn. Phoebe (mean diameter 213 kilometers) is a former TNO now orbiting Saturn. VIMS spectral maps of Phoebe's surface reveal a complex organic spectral signature consisting of prominent aromatic (CH) and aliphatic hydrocarbon (CH2, CH3) absorption bands (3.2-3.6 meters). Phoebe is the source of a huge debris ring encircling Saturn, and from which particles (5-20 meter size) spiral inward toward Saturn. They encounter Iapetus and Hyperion where they mix with and blanket the native H2O ice of those two bodies. Quantitative analysis of the hydrocarbon bands on Iapetus demonstrates that aromatic CH is 10 times as abundant as aliphatic CH2 plus CH3, significantly exceeding the strength of the aromatic signature in interplanetary dust particles, comet particles, and in carbonaceous meteorites (Cruikshank et al. 2013). A similar excess of aromatics over aliphatics is seen in the qualitative analysis of Hyperion and Phoebe itself (Dalle Ore et al. 2012). The Iapetus aliphatic hydrocarbons show CH2/CH3 4, which is larger than the value found in the diffuse ISM (InterStellar Matter - (2-2.5). Insofar as Phoebe is a primitive body that formed in the outer regions of the solar nebula and has preserved some of the original nebula inventory, it can be key to understanding the content and degree of processing of that nebular material. There are other Phoebe-like TNOs that are presently beyond our ability to study in the organic spectral region, but JWST (James Webb Space Telescope) will open that possibility for a number of objects. We now need to explore and understand the connection of this organic-bearing Solar System material to the solar nebula and the inventory of ISM (Interstellar Medium) materials incorporated therein.

Phoebe↗