Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “data- limited”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Trends in stratospheric minor constituents

Photochemical models predict that increasing source gas concentrations are also expected to lead to changes in the concentrations of both catalytically active radical species (such as NO2, ClO, and OH) and inactive reservoir species (such as HNO3, HCl, and H2O). For simplicity, we will refer to all these as trace species. Those species that are expected to have increasing concentration levels are investigated. Additionally, the trace species concentration levels are monitored for unexpected changes on the basis of the measure increase in source gases. Carrying out these investigations is difficult due to the limited data base of measurements of stratospheric trace species. In situ measurements are made only infrequently, and there are few satelliteborne measurements, most over a time space insufficient for trend determination. Instead, ground-based measurements of column content must be used for many species, and interpretation is complicated by contributions from the troposphere or mesosphere or both. In this chapter, we examine existing measurements as published or tabulated.

Stolarski, R. S.↗
NASA NTRS1991

A statistical model of carbon/carbon composite failure

A failure model which considers the stochastic nature of the damage accumulation process is essential to assess reliability and to accurately scale the results from standard test specimens to composite structures. A superior filamentary composite for high temperature applications is composed of carbon fibers in a carbon matrix. Carbon-carbon composites are the strongest known material at very high temperatures. Since there appears to be a significant randomness in C-C material strength which cannot be controlled or detected with current technology, a better model of the material failure based upon statistical principles should be used. Simple applications of the model based upon the limited data provide encouraging results that indicate that better design of test specimens would provide a substantially higher prediction for the design strength of C-C composites. An A-basis strength for the C-C tensile rings from a first stage D-5 billets was estimated. A statistical failure model was developed for these rings which indicates that this strength may be very conservative for larger C-C parts. The analysis may be improved by use of a heterogeneous/noncontinuum finite element approach on the minimechanical level.

Slattery, Kerry T.↗
NASA NTRS1992

Underlying modal data issues for detecting damage in truss structures

Independent of the modal identification techniques employed for damage detection, use of measured modal data limits the expectations for damage location. These limitations are examined using the distribution of modal strain energy and the sensitivity of the frequency and mode shapes to structural stiffness changes. For given measured modal information of specific accuracy, this examination reveals the following: (1) damage detection is feasible for members that contribute significantly to the strain energy of the measured modes, (2) the modes which are most effective in detecting damage to certain critical members can be identified, and (3) a relationship can be drawn between the accuracy of the measured modes and frequencies and damage detection feasibility.

Kashangaki, Thomas A-L.↗
NASA NTRS1992

Preliminary evaluation of adhesion strength measurement devices for ceramic/titanium matrix composite bonds

The adhesive bond between ceramic cement and a titanium matrix composite substrate to be used in the National Aerospace Plane program is evaluated. Two commercially available adhesion testers, the Sebastian Adherence Tester and the CSEM REVETEST Scratch Tester, are evaluated to determine their suitability for quantitatively measuring adhesion strength. Various thicknesses of cements are applied to several substrates, and bond strengths are determined with both testers. The Sabastian Adherence Tester has provided limited data due to an interference from the sample mounting procedure, and has been shown to be incapable of distinguishing adhesion strength from tensile and shear properties of the cement itself. The data from the scratch tester has been found to be difficult to interpret due to the porosity and hardness of the cement. Recommendations are proposed for a more reliable adhesion test method.

Pohlchuck, Bobby↗
NASA NTRS1992

Environmental fatigue in aluminum-lithium alloys

Aluminum-lithium alloys exhibit similar environmental fatigue crack growth characteristics compared to conventional 2000 series alloys and are more resistant to environmental fatigue compared to 7000 series alloys. The superior fatigue crack growth behavior of Al-Li alloys 2090, 2091, 8090, and 8091 is due to crack closure caused by tortuous crack path morphology and crack surface corrosion products. At high R and reduced closure, chemical environment effects are pronounced resulting in accelerated near threshold da/dN. The beneficial effects of crack closure are minimized for small cracks resulting in rapid growth rates. Limited data suggest that the 'chemically small crack' effect, observed in other alloy system, is not pronounced in Al-Li alloys. Modeling of environmental fatigue in Al-Li-Cu alloys related accelerated fatigue crack growth in moist air and salt water to hydrogen embrittlement.

Piascik, Robert S.↗
NASA NTRS1990

The use of remotely sensed surface temperature and a spectral vegetation index for evaluating heat fluxes over the Konza Prairie

The relationship between surface temperature T(s) and the normalized difference vegetation index (NDVI) is examined to determine whether it can be used to characterize latent heat fluxes (LEs). The regression of T(s) on NDVI is studied in the context of surface heat fluxes over the prairie with a limited data set for four flux-measurement sites. The 17 flux-measurement stations at the sites provided data that are consistently significant at the 99-percent confidence level for the regression of T(s) on NDVI. Variations in the regression slopes are found to correlate with variations in the ground heat flux but not with LE. Important components of the regression of T(s) on NDVI include fractional vegetation cover and surface-soil moisture conditions. The relationship is important for determining the relative contributions of the soil and vegetation components of an area's total evaporative flux.

Hope, A. S.↗
NASA NTRS1991

Observations of snow and ice features during the polar winter using moonlight as a source of illumination

Sunlight reflected off the surface of the moon provides sufficient illumination for nighttime imaging of the earth from those spacecraft on which the instruments are sensitive to low light levels. The Defense Meteorological Satellite Program (DMSP) series of satellites are at present the only systems capable of furnishing visible nocturnal images of the earth from space. Features having a high albedo in the visible wavelengths, such as snow and ice, can easily be identified on moonlit nights when the moon is in the gibbous or full phases. Little information exists about the distribution of leads, fractures, and polynya on a basin-wide scale in the winter pack ice, and knowledge of oceanic and atmospheric fluxes is hindered by the limited data available in winter. The DMSP data is a relatively untapped source for observing polar regions during the winter. Using nighttime imagery is a novel way to explore polar areas during the winter months when the sun is below the horizon for much of the time.

Foster, James L.↗
NASA NTRS1991

A study of lens opacification for a Mars mission

A method based on risk-related cross sections is used to estimate risks of 'stationary' cataracts caused by radiation exposures during extended missions in deep space. Estimates of the even more important risk of late degenerative cataractogenesis are made on the basis of the limited data available. Data on lenticular opacification in the New Zealand white rabbit, an animal model from which such results can be extrapolated to humans, are analyzed by the Langley cosmic ray shielding code (HZETRN) to generate estimates of stationary cataract formation resulting from a Mars mission. The effects of the composition of shielding material and the relationship between risk and LET are given, and the effects of target fragmentation on the risk coefficients are evaluated explicitly.

Shinn, J. L.↗
NASA NTRS1991

Intelligent monitoring and control of semiconductor manufacturing equipment

The use of AI methods to monitor and control semiconductor fabrication in a state-of-the-art manufacturing environment called the Rapid Thermal Multiprocessor is described. Semiconductor fabrication involves many complex processing steps with limited opportunities to measure process and product properties. By applying additional process and product knowledge to that limited data, AI methods augment classical control methods by detecting abnormalities and trends, predicting failures, diagnosing, planning corrective action sequences, explaining diagnoses or predictions, and reacting to anomalous conditions that classical control systems typically would not correct. Research methodology and issues are discussed, and two diagnosis scenarios are examined.

Murdock, Janet L.↗
NASA NTRS1992

Tensile properties of impact ices

A special test apparatus was developed to measure the tensile strength of impact ices perpendicular to the direction of growth. The apparatus consists of a split tube carefully machined to minimize the effect of the joint on impact ice strength. The tube is supported in the wind tunnel by two carefully aligned bearings. During accretion the tube is turned slowly in the icing cloud to form a uniform coating of ice on the split tube specimen. The two halves of the split tube are secured firmly by a longitudinal bolt to prevent relative motion between the two halves during ice accretion and handling. Tensile test strength results for a variety of icing conditions were obtained. Both glaze and rime ice conditions were investigated. In general, the tensile strength of impact ice was significantly less than refrigerator ice. Based on the limited data taken, the median strength of rime ice was less than glaze ice. However, the mean values were similar.

Chu, M. L.↗
NASA NTRS1992

Nutrition in space - Evidence from the U.S. and the U.S.S.R

Space flight exposes humans to a hostile, stressful environment as well as to the weightlessness associated with microgravity. The stresses of space travel affect nutritional balance, as evidenced by interrelated changes in body composition, energy utilization, and endocrine function. The limited data gathered thus far suggest that space flight incurs acute decreases in fluid mass and chronic, ongoing changes in muscle and bone mass. Concurrent with these changes is an increase in energy used per unit body mass. Other preliminary data suggest that bed rest and space flight may incur increased sensitivity to insulin. Further research is needed to determine the human energy and protein requirements for space, as well as a means of quantifying changes in body composition during extended-duration space flight.

Lane, Helen W.↗
NASA NTRS1992

A procedure for sizing propulsion system filter capacity

A propulsion system filter has the function of protecting downstream components from propellant-borne particulate matter. A the same time, it must be designed with sufficient capacity to ensure that it will not clog during the life of the spacecraft. This capacity can be quantitatively calculated by means of the procedure described here. Previous work has presented limited data which suggest that filter clogging is a function of the number and size of ingested particles. Cleaning specifications for propusion system components are also normally given in terms of the number and size of particles removed by the flow of test fluid. It is proposed here that the filter capacity be given in terms of the number and size of particles, which in turn may be convected to an equivalent quantity of test dust.

Jan, Darrell L.↗
NASA NTRS1992

Electric field and radio frequency measurements for rocket engine health monitoring applications

Electric-field (EF) and radio-frequency (RF) emissions generated in the exhaust plumes of the diagnostic testbed facility thruster (DTFT) and the SSME are examined briefly for potential applications to plume diagnostics and engine health monitoring. Hypothetically, anomalous engine conditions could produce measurable changes in any characteristic EF and RF spectral signatures identifiable with a 'healthly' plumes. Tests to determine the presence of EF and RF emissions in the DTFT and SSME exhaust plumes were conducted. EF and RF emissions were detected using state-of-the-art sensors. Analysis of limited data sets show some apparent consistencies in spectral signatures. Significant emissions increases were detected during controlled tests using dopants injected into the DTFT.

Valenti, Elizabeth L.↗
NASA NTRS1984

A mathematical problem and a Spacecraft Control Laboratory Experiment (SCOLE) used to evaluate control laws for flexible spacecraft. NASA/IEEE design challenge

Discussed here is a NASA program which was initiated to make direct comparisons of control laws for a mathematical problem. An experimental test item is being assembled under the cognizance of the Spacecraft Control Branch at Langley Research Center. The physical apparatus will consist of a softly supported dynamic model of an antenna attached to the Space Shuttle by a flexible beam. The control objective will include the task of directing the line of sight of the Shuttle/antenna configuration toward a fixed target, under conditions of noisy data, limited control authority, and random disturbances.

Taylor, Lawrence W., Jr.↗
NASA NTRS1993

Comparison of liquid rocket engine base region heat flux computations using three turbulence models

The flow in the base region of launch vehicles is characterized by flow separation, flow reversals, and reattachment. Computation of the convective heat flux in the base region and on the nozzle external surface of Space Shuttle Main Engine and Space Transportation Main Engine (STME) is an important part of defining base region thermal environments. Several turbulence models were incorporated in a CFD code and validated for flow and heat transfer computations in the separated and reattaching regions associated with subsonic and supersonic flows over backward facing steps. Heat flux computations in the base region of a single STME engine and a single S1C engine were performed using three different wall functions as well as a renormalization-group based k-epsilon model. With the very limited data available, the computed values are seen to be of the right order of magnitude. Based on the validation comparisons, it is concluded that all the turbulence models studied have predicted the reattachment location and the velocity profiles at various axial stations downstream of the step very well.

Kumar, Ganesh N.↗
NASA NTRS1988

On-orbit parametric identification methodology

On-orbit system identification (ID) of large space systems is essential for various reasons. For example, the complex composite structure of such systems cannot be ground-tested; their structural dynamic characteristics must be known accurately in order to accomplish active control. Furthermore, such capability can be used to characterize/identify various disturbances. The identification process is consisted of four principal elements: (1) modeling, (2) the estimation algorithm, (3) input system, and (4) measurement system. These elements are highly correlated and all togerher determine the success of the identification problem. Accurate modeling of large space systems is the most important element of the identification process. Large flexible structures are non-linear and infinite dimensional systems with highly coupled parameters and low frequency packed modes. In addition, these systems are subject to stochastic and time-varying disturbances, they have structural parameters which can vary due to on-orbit assembly deployment, and operations. These systems are generally; however, represented by constant coefficient, finite order differential equations. The non-linearities, coupling and noise effects are also often neglected. Moreover, identification experiment designs which lead to highly complex optimization problems usually require the simultaneous choice of ID algorithm, sensor, and actuator type and placement. On-orbit bandwidth and power restrictions on excitation, limited data window, and restrictions on sensor/actuator type, placement and number, has led to practical questions of implementations.

Hadaegh, Fred Y.↗
NASA NTRS1947

The NACA mixture analyzer and its application to mixture-distribution measurement in flight

The NACA mixture analyzer was developed as a research instrument for the continuous indication of fuel-air ratios of aircraft engine installations throughout the range of engine operation. It has been evaluated by using it to measure the mixture distribution of a nine-cylinder radial aircraft engine in flight. The mixture distribution among the cylinders in flight was obtained at normal operating conditions for the engine at an altitude of 5000 feet. Some limited data was also obtained at an altitude of 20,000 feet. Results of these flight tests showed that the NACA mixture analyzer is a satisfactory and dependable instrument for continuous indication of the mixture in flight at all engine conditions regardless of altitude and temperature.

Gerrish, Harold C↗
NASA NTRS1953

Measurements obtained during the glide-flight program of the Bell X-2 research airplane

Results obtained during the glide-flight program of the Bell X-2 research airplane are presented. Landing characteristics and limited data evaluating static longitudinal stability at low speeds are included. The data indicated positive static longitudinal stability in unaccelerated flight from indicated airspeeds of 152 to 178 miles per hour for the clean configuration, between 142 and 171 miles per hour with the flaps up and gear extended, and between 142 and 204 miles per hour with flaps and gear extended. A region of neutral stability, both stick fixed and stick free, was apparent between 178 and 192 miles per hour for the clean configuration. Data obtained during a turn made at an indicated airspeed of approximately 235 miles per hour with steadily increasing acceleration indicated positive stick-free and stick-fixed longitudinal stability. Stick force per unit normal acceleration was approximately 15 pounds. Pilots' notes indicated that dynamic stability in each plane of reference was apparently positive with satisfactory damping for the speed range covered. The main landing-skid surface area was enlarged 300 percent for flights 2 and 3 with a resulting improvement in landing characteristics. Average longitudinal deceleration during the ground run was decreased from 0.7 unit of acceleration for flight 1 to a value of 0.3 unit of acceleration for flights 2 and 3. Normal acceleration at the nose wheel was correspondingly reduced from 4 to 2.8 units of acceleration. The addition of inboard wing skids prevented rolling onto a wing tip during ground run.

Richard E Day↗