Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “data needs”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Transplatformer: translating toxicogenomic profiles between generations of platforms

Background Transcriptomic profiling technologies have advanced the analysis of biological and toxicological responses. However, substantial differences in probe design, dynamic range, gene coverage, and preprocessing pipelines across platforms introduce artifacts that limit cross-study integration and hinder the reuse of historical datasets. We aim to develop computational methods for accurate cross-platform translation to maximize the value of legacy resources. Results We present TransPlatformer a deep learning framework for translating gene expression profiles across heterogeneous toxicogenomics platforms. TransPlatformer employs a novel attention-based architecture to map high-dimensional fold-change vectors from legacy microarray technologies to current platforms. Models are trained and evaluated using DrugMatrix, spanning three technological generations. We investigate mixed-tissue, single-tissue, and cross-tissue training paradigms and benchmark performance against multilayer perceptron and matrix-completion baselines. In mixed-tissue training, TransPlatformer achieves a greater than 50% reduction in mean absolute error (0.043 vs. 0.09) and nearly doubles Pearson correlation ( ≈ 0.71 vs. 0.37) relative to baseline methods. Importantly, TransPlatformer preserves rare but biologically meaningful over- and under-expressed signals, with mean absolute error below 0.22. Single-tissue models yield further improvements for well-represented organs, such as a 10% reduction in liver mean absolute error, while underscoring the need for data augmentation strategies in low-sample tissues.ra Conclusions TransPlatformer provides an effective and scalable computational solution for cross-platform transcriptomic translation. By enabling biologically faithful harmonization of gene expression data, the proposed approach facilitates the reuse of legacy toxicogenomics datasets, enhances downstream biomarker discovery, and supports more reproducible predictive modeling in toxicology.

59 BASIC BIOLOGICAL SCIENCES↗

LQCD NN S-wave @ SU(3) on C103

This data contains lattice QCD data files for one- and two-nucleon correlation functions on the C103 ensemble. It also contains lattice QCD data sets needed to compute the HAL QCD potential on the same configurations. 'LQCD NN S-wave @ SU(3) on C103' Copyright (c) 2025, The Regents of the University of California, through Lawrence Berkeley National Laboratory (subject to receipt of any required approvals from the U.S. Dept. of Energy). All rights reserved. This work is openly licensed via CC BY 4.0.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Update on the Benchmark Analysis of the Jupiter Experiments: Plutonium Moderated by Lead

The Jupiter experiment was a series of measurements in the summer of 2017 to analyze the effects of voids in lead moderated plutonium assemblies. This experiment was part of a larger campaign that took place at the National Criticality Experiments Research Center (NCERC) in collaboration with the Japan Atomic Energy Agency (JAEA) that also investigated assemblies with differing uranium enrichments. The purpose for this campaign was to provide data useful for a potential lead-bismuth cooled accelerator driven system. This data is needed due to the low number of benchmarks involving lead. Given the wide use of lead for shielding in addition to new reactor designs, there is a need for further benchmarking that this experiment could help fulfill. In addition, adding more benchmarks to the International Criticality Safety Benchmark Evaluation Project (ICSBEP) is helpful for further validation of simulation methods used for criticality safety. This summary is an update on the current progress of this analysis, and all results shown are preliminary.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Design and Modeling of an 80 bar Oxy-Combustor for Direct Fired Supercritical CO2 Applications

As supercritical CO2 power cycles for fossil energy power generation continue to generate interest, there are significant issues and unanswered questions regarding injector design, flame stabilization, wall heat transfer, CO emissions, combustion dynamics and other combustion phenomenon. For natural gas, direct-fired cycles with carbon capture it is believed that Computational Fluid Dynamics (CFD) modeling will play an essential role in the combustor design process. To accurately model turbulent reacting flows at these unique conditions, experimental data is needed to validate CFD codes and sub-models and is currently lacking at conditions relevant for these cycles. This paper presents the conceptual design and CFD simulations of an experimental 80 bar oxy-combustion facility and test article currently under construction at NETL. The facility is targeted towards the testing of a single injector, direct-fired sCO2 combustor at the 100 kW thermal output level. While these conditions do not reflect the actual Allam cycle operating conditions (300 bar) they are viewed as a stepping stone in the model validation process at supercritical conditions. Reynolds Averaged Navier-Stokes as well as Large Eddy Simulation are used to model the turbulent combustion process and aid in the design of the combustor and injector. Process parameters including oxidizer preheat temperature and combustor flowrate are investigated.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

2019 Results for Avian Monitoring of Inorganic and Organic Element Concentrations in Passerine Eggs and a Nestling Collected from Technical Area 16 Burn Grounds, Technical Area 36 Minie, and Technical Area 39 Point 6 at Los Alamos National Laboratory

In 2019, non-viable avian eggs and one nestling were opportunistically collected at Los Alamos National Laboratory (LANL) near open detonation sites located at Technical Area (TA) 16 burn grounds, TA-36 Minie, and TA-39 Point 6. These samples were evaluated for inorganic elements (mostly metals), polychlorinated biphenyls (PCBs), dioxins, and furans. A total of 26 western bluebird (Sialia mexicana) and five mountain bluebird (Sialia currucoides) egg samples and one non-viable ash-throated flycatcher (Myiarchus cinerascens) nestling were collected among the three locations of interest. Concentrations of inorganic elements observed in this study were compared with the regional statistical reference level (RSRL) which is the upper-level bounds of background concentrations (mean + three standard deviations = 99% confidence interval). Several inorganic elements were not detected in avian eggs and the majority of inorganic elements detected were below the RSRL. The few elements that exceeded the RSRL were below the lowest observable adverse effect level (LOAEL), when available. One nestling collected from TA-16 contained detectable concentrations of some dioxin and furan congeners. Octachlorodibenzodioxin-1,2,3,4,6,7,8,9 concentration exceeded the RSRL, but did not exceed the calculated tetrachlorodibenzodioxin-2,3,7,8 (TCDD) toxic equivalent LOAEL. PCBs were also detected in the nestling sample and were above the RSRL but below the LOAEL. These data suggest that inorganic and organic element concentrations in eggs and nestlings are not of ecological concern. More data are needed to make a robust assessment and to evaluate trends over time.

54 ENVIRONMENTAL SCIENCES↗

Scorpius injector emittance measurements with solenoid scans

A classic scan solenoid can establish that the injector meets emittance requirements. Incorporating an aperture plate can validate predictions of much lower emittance. Measurements of beam parameters on the injector and ITS can inform predictions for the full LIA. Injector beam data is needed to tune the full LIA for initial turn-on and operation. Emittance measurements on the Scorpius injector are difficult because the beam is space-charge dominated. Emittance measurements on Scorpius injector and ITS will need large beam size to prevent overheating.

43 PARTICLE ACCELERATORS↗

Unattended Single Channel Analyzer (USCA) FY20 Summary Report

In FY20 LANL was funded to design, fabricate, test and document an instrument that can be used by the IAEA for gamma ray measurements in scintillator applications. This instrument, the Unattended Single Channel Analyzer (USCA), will be part of the family of IAEA unattended instruments and completes the suite of most used data acquisition needs provided by the previously designed UNAP instrument. The USCA is designed to meet all the same IAEA requirements designed into the UMSR and UDCM. The new instrument has the same look and feel making it simple for agency staff to move between instruments. This project taps into all the design functions developed during the UMSR and UDCM development. Along with the design and fabrication of a USCA, this project included production of a prototype for IAEA testing and a complete set of documentation.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Diagnosing Field Strengths and Plasma Conditions in Magnetically Insulated Transmission Lines Using Active Dopant Spectroscopy

Experimental validation data is needed to inform simulations of large pulsed power devices which are in development to understand and improve existing accelerators and inform future pulsed power capabilities. Using current spectroscopic techniques on the Z-machine, we have been unable to reliably diagnose plasma conditions and electric and magnetic fields within power flow regions. Laser ablation of a material produces a low density plasma, resulting in narrow spectroscopic line widths. By introducing a laser ablated plasma to the anode cathode gap of the Mykonos accelerator, we can monitor how the line shapes change due the current pulse by comparing these line shapes to spectral measurements taken without power flow. In this report we show several examples of measurements conducted on Mykonos on various dopant materials. We also show a negligible effect on power flow due to the presence of the ablation plasma for a range of parameters.

43 PARTICLE ACCELERATORS↗

2020 Results for Avian Monitoring of Inorganic and Organic Element Concentrations in Passerine Eggs and Nestlings Collected from Technical Area 16 Burn Grounds, Technical Area 36 Minie, and Technical Area 39 Point 6 at Los Alamos National Laboratory

In 2020, non-viable avian eggs and two nestling were opportunistically collected at Los Alamos National Laboratory (LANL) near open detonation sites located at Technical Area (TA) 16 burn grounds, TA-36 Minie, and TA-39 Point 6. These samples were evaluated for inorganic elements (mostly metals), dioxins, and furans. A total of six eggs and two deceased western bluebird (Sialia mexicana) nestling samples were collected among the three locations of interest. Concentrations of inorganic elements observed in this study were compared with the regional statistical reference level (RSRL) which is the upper-level bounds of background concentrations (mean + three standard deviations = 99% confidence interval). Several inorganic elements were not detected in avian eggs and all inorganic elements detected were below the RSRL and the lowest observable adverse effect level (LOAEL), when available. One nestling collected from TA-39 contained detectable concentrations of two dioxin congeners. Heptachlorodibenzodioxin-1,2,3,4,6,7,8 and octachlorodibenzodioxin-1,2,3,4,6,7,8,9 concentration exceeded the RSRL, but did not exceed the calculated tetrachlorodibenzodioxin 2,3,7,8 (TCDD) toxic equivalent LOAEL. These data suggest that inorganic and organic element concentrations in eggs and nestlings are not of ecological concern. More data are needed to make a robust assessment and to evaluate trends over time.

54 ENVIRONMENTAL SCIENCES↗

Reliability Prediction using FMEA, FTA, and Related Techniques [Slides]

Summary: We presented a reliability analysis framework. We made point estimates of reliability using reliability block diagrams, fault trees, success trees and estimates with uncertainty using expert elicitation, Monte Carlo simulation, Bayesian analysis. Expert elicitation of failure modes and probabilities is labor-intensive, but critical. Bayesian analysis updates information from expert elicitation with data from reliability and aging tests (aging/compatibility data are needed to estimate lower-bound reliabilities at end of life). Estimation by more than one method helps insure consistency and accuracy.

97 MATHEMATICS AND COMPUTING↗

Survey of Available Information on U.S. Manufacturing Wastewater and Energy Requirements for Reuse

This report seeks to inform an improved understanding of the energy tradeoff associated with manufacturing water reuse in the United States, in part by developing an analytical framework for understanding when this tradeoff for reuse is beneficial. In order to apply this approach, existing literature and publicly available information on typical contaminants in industrial effluent and available treatment technologies are reviewed and summarized. An existing case study is then discussed in light of how the analytical framework could be applied if sufficient data were available. We conclude that the shortcomings of the available data severely restrict our ability to apply this framework. These limitations are highlighted with the intent of providing the broader research community information on where data gaps need to be filled.

54 ENVIRONMENTAL SCIENCES↗

2021 Results for Avian Monitoring of Inorganic and Organic Element Concentrations in Passerine Eggs and Nestlings Collected from Technical Area 16 Burn Grounds, Technical Area 36 Minie, and Technical Area 39 Point 6 at Los Alamos National Laboratory (Rev. 2)

In 2021, non-viable avian eggs and one nestling were opportunistically collected at Los Alamos National Laboratory (LANL) near open detonation sites located at Technical Area (TA) 16 burn grounds and TA-36 Minie. Similar to previous years, nestboxes were monitored at TA-39 Point 6, however, no avian samples were available for opportunistic collection. Samples were evaluated for inorganic elements (mostly metals), dioxins, and furans. One ash-throated flycatcher (Myiarchus cinerascens) egg sample was collected from TA-16 burn grounds. One ash-throated flycatcher and one mountain bluebird (Sialia currucoides) egg sample and one deceased western bluebird (Sialia mexicana) nestling sample were collected from TA-36 Minie. Concentrations of inorganic elements observed in this study were compared with the regional statistical reference level (RSRL) which is the upper-level bounds of background concentrations (mean + three standard deviations = 99% confidence interval). Several inorganic elements were not detected in avian eggs. Most inorganic elements detected were below the RSRL and all were the lowest observable adverse effect level (LOAEL), when available. The nestling collected from TA-36 did not contain detectable concentrations of dioxin or furan congeners. These data suggest that inorganic and organic element concentrations in eggs and nestlings are not of ecological concern. More data are needed to make a robust assessment and to evaluate trends over time.

54 ENVIRONMENTAL SCIENCES↗

Affordable Solid Panel "Perfect Wall" System

The SPS is an innovative interpretation of the “perfect wall” concept, in which environmental control layers are located on the exterior side of the structural components, as opposed to traditional cavity insulated, stud-framed walls. The primary objective of this study is to validate the SPS technology in terms of its constructability, cost, and performance. Specifically for this project, we partnered with two affordable housing nonprofits in Minnesota—Twin Cities Habitat for Humanity and Urban Homeworks—to build five new houses using SPS walls, as well as two high-performance stud-framed comparison homes. We also reviewed cost and performance data from 13 SPS homes built prior to this project by MonoPath and Spero Environmental Builders. Reviewing the outcomes of these 20 homes total, we find promising results in terms of constructability, cost, and performance, although more structural performance data are needed before this new technology can see widespread adoption.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Processing Particle Data Flows with SmartNICs

Many distributed applications implement complex data flows and need a flexible mechanism for routing data between producers and consumers. Recent advances in programmable network interface cards, or SmartNICs, represent an opportunity to offload data-flow tasks into the network fabric, thereby freeing the hosts to perform other work. System architects in this space face multiple questions about the best way to leverage SmartNICs as processing elements in data flows. In this paper, we advocate the use of Apache Arrow as a foundation for implementing data-flow tasks on SmartNICs. We report on our experiences adapting a partitioning algorithm for particle data to Apache Arrow and measure the on-card processing performance for the BlueField-2 SmartNIC. Our experiments confirm that the BlueField-2’s (de)compression hardware can have a significant impact on in-transit workflows where data must be unpacked, processed, and repacked.

97 MATHEMATICS AND COMPUTING↗

2022 Results for Avian Monitoring of Inorganic Elements and Organic Chemical Concentrations in Passerine Eggs and Nestlings Collected from Technical Area 16 Burn Grounds, Technical Area 36 Minie, and Technical Area 39 Point 6 at Los Alamos National Laboratory

In 2022, nonviable avian eggs and one nestling were opportunistically collected at Los Alamos National Laboratory (LANL) near open detonation sites located at Technical Area (TA) 16 burn grounds, TA-36 Minie, and TA-39 Point 6. Samples were evaluated for inorganic elements (mostly metals) or per- and polyfluoroalkyl substances (PFAS). Three western bluebird (Sialia mexicana) egg samples were collected from TA-16 burn grounds. One deceased mountain bluebird (Sialia currucoides) nestling sample was collected from TA-36 Minie. One ash-throated flycatcher (Myiarchus cinerascens) egg sample was collected from TA-39 Point 6. Concentrations of inorganic elements (i.e., mostly metals) observed in this study were compared with the regional statistical reference level (RSRL), which is the upper-level bounds of background concentrations (mean + three standard deviations = 99% confidence interval). Several inorganic elements were not detected in avian eggs. All of the inorganic elements that were detected were below the RSRL and the lowest observable adverse effect level (LOAEL), when available. No PFAS compounds were detected in the mountain bluebird nestling sample collected from TA-36, and the majority of PFAS compounds were not detected in the western bluebird egg sample from TA-16. These data suggest that inorganic element and PFAS concentrations in eggs and nestlings are not of ecological concern. More data are needed to make a robust assessment and to evaluate trends over time.

59 BASIC BIOLOGICAL SCIENCES↗

Summary of Methodology for Mitigating Risks Associated with Licensing and Qualifying AM Nuclear Materials

The US Department of Energy’s Advanced Materials and Manufacturing Technologies (AMMT) program focuses on accelerating the development, qualification, demonstration, and deployment of advanced materials and manufacturing technologies to enable reliable and economical nuclear energy. Laser powder bed fusion (LPBF) is one of the most popular additive manufacturing (AM) processes for fabricating components with intrinsically complex geometries. LPBF was extensively explored for nuclear applications under the previous Transformational Challenge Reactor program. Additionally, Oak Ridge National Laboratory developed and licensed the Peregrine software and larger digital platform that couples machine learning and in situ data collection during AM to detect anomalies and any evolved defects. The digital platform will be critical to (1) the qualification of AM components for nuclear applications that link location-specific data to macroscopic properties and (2) predict final component performance. Current in situ process monitoring tools are valuable for observing the formation of stochastic flaws, but additional data are needed to predict the resulting microstructures and associated material performance. Rapid cooling rates and large thermal gradients have caused large heterogeneities in the microstructure, which cause anisotropy in mechanical performance. The AMMT program is evaluating the best approaches for addressing these heterogeneities and their effect on component performance using a combination of multiscale modeling, enhanced in situ process monitoring, and high throughput experimental testing. This report summarizes strategies for mitigating the risks associated with qualifying AM components, including developing new sensing capabilities for in situ process monitoring and characterizing melt pool solidification and residual stresses to inform multiscale modeling efforts.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Building a better framework for evaluating human well-being impacts in global change analysis: The example of energy security

Human well-being can be greatly impacted by the global environmental and socio-economic change captured in Integrated Models of Global Change (IMGCs). Though most IMGCs address some aspects of well-being, their underlying modeling approach and ‘philosophy’ differ widely, and some key elements – like energy security – are omitted. In this report, we describe a project in which we set out to a create a framework through which the well-being dimensions of the household are connected to key drivers of socio-economic and environmental change – and how the needed metrics, data and modeling methods can be brought to bear. We focus on the well-being dimensions of energy, and lay out the necessary elements to capturing household energy security – using household energy burden as the relevant metric. We begin by showing the conceptual linkage of energy burden to environmental drivers like temperature change, using a simple and straightforward conceptual framework. We then go further to use the example of GCAM-USA to show how some key analytical features of the model can provide insight into how energy security across different groups can change along alternative pathways to sustainability. We compare our preliminary assessment of household energy burden to existing data and suggest further steps to improve and refine this analysis in future research.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗