SEARCH · Engineering Papers

Results for “data conditioning”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

All sources NASA NTRS DOE OSTI

NASA NTRS1976

Relative toxicity of products of pyrolysis and combustion of polymeric materials using various test conditions

Relative toxicity data for a large number of natural and synthetic polymeric materials are presented which were obtained by 11 pyrolysis and three flaming-combustion test methods. The materials tested include flexible and rigid polyurethane foams, different kinds of fabrics and woods, and a variety of commodity polymers such as polyethylene. Animal exposure chambers of different volumes containing mice, rats, or rabbits were used in the tests, which were performed over the temperature range from ambient to 800 C with and without air flow or recirculation. The test results are found to be sensitive to such variables as exposure mode, temperature, air flow and dilution, material concentration, and animal species, but relative toxicity rankings appear to be similar for many methods and materials. It is concluded that times to incapacitance and to death provide a more suitable basis for relative toxicity rankings than percent mortality alone, that temperature is the most important variable in the tests reported, and that variables such as chamber volume and animal species may not significantly affect the rankings.

Hilado, C. J.↗

NASA NTRS1982

Stiffness reductions during tensile fatigue testing of graphite/epoxy angle-ply laminates

Tensile fatigue data was generated under carefully controlled test conditions. A computerized data acquisition system was used to permit the measurement of dynamic modulus without interrupting the fatigue cycling. Two different 8-ply laminate configurations, viz, + or - 45 (2s) and + or - 67.5 (2s), of a T300/5208 graphite/epoxy composite were tested. The + or - 45 (2s) laminate did exhibit some modulus decay, although there was no well-defined correlation with applied stress level or number of cycles. The + or - 67.5 (2s) laminate did not exhibit any measurable modulus decay. Secondary effects observed included a small but distinct difference between modulus as measured statically and dynamically, a slight recovery of the modulus decay after a test interruption, and a significant viscoelastic (creep) response of the + or - 45 (2s) laminate during fatigue testing.

Odom, E. M.↗

NASA NTRS1983

Local effects of partly-cloudy skies on solar and emitted radiations

Atmospheric aerosol and turbidity measurements were analyzed and the results are presented. The correlation of global insolation with cloud cover fractions for the first complete year's data set was completed. A theoretical model was developed to parameterize the effects of local aerosols upon insolation received at the ground using satellite radiometric data and insolation measurements under clear sky conditions. A February data set, composed of one minute integrated global insolation and direct solar irradiances, cloud cover fractions, meteorological data from nearby weather stations, and GOES East satellite radiometric data was collected to test the model and used to calculate the effects of local aerosols.

Whitney, D. A.↗

NASA NTRS1987

Satellite remote sensing of drought conditions

Multitemporal satellite data have application in the detection and quantification of drought through the ability of these data to estimate the photosynthetic capacity of the terrestrial surface and record microwave surface brightness at the 37 GHz frequency. With proper calibration and registration, comparisons can be made between and among years for specific months using the photosynthetic capacity and the 37 GHz microwave surface brightness for selected time periods or growing seasons. This technology has application in identifying and quantifying areas experiencing drought.

Tucker, Compton J.↗

NASA NTRS1991

Techniques for containing error propagation in compression/decompression schemes

Data compression has the potential for increasing the risk of data loss. It can also cause bit error propagation, resulting in catastrophic failures. There are a number of approaches possible for containing error propagation due to data compression: (1) data retransmission; (2) data interpolation; (3) error containment; and (4) error correction. The most fruitful techniques will be ones where error containment and error correction are integrated with data compression to provide optimal performance for both. The error containment characteristics of existing compression schemes should be analyzed for their behavior under different data and error conditions. The error tolerance requirements of different data sets need to be understood, so guidelines can then be developed for matching error requirements to suitable compression algorithms.

Kobler, Ben↗

NASA NTRS2000

Bubble Formation from Wall Orifice in Liquid Cross-Flow Under Low Gravity

Two-phase flows present a wide variety of applications for spacecraft thermal control systems design. Bubble formation and detachment is an integral part of the two phase flow science. The objective of the present work is to experimentally investigate the effects of liquid cross-flow velocity, gas flow rate, and orifice diameter on bubble formation in a wall-bubble injection configuration. Data were taken mainly under reduced gravity conditions but some data were taken in normal gravity for comparison. The reduced gravity experiment was conducted aboard the NASA DC-9 Reduced Gravity Aircraft. The results show that the process of bubble formation and detachment depends on gravity, the orifice diameter, the gas flow rate, and the liquid cross-flow velocity. The data are analyzed based on a force balance, and two different detachment mechanisms are identified. When the gas momentum is large, the bubble detaches from the injection orifice as the gas momentum overcomes the attaching effects of liquid drag and inertia. The surface tension force is much reduced because a large part of the bubble pinning edge at the orifice is lost as the bubble axis is tilted by the liquid flow. When the gas momentum is small, the force balance in the liquid flow direction is important, and the bubble detaches when the bubble axis inclination exceeds a certain angle.

Nahra, Henry K.↗

NASA NTRS1994

(abstract) Line Mixing Behavior of Hydrogen-Broadened Ammonia Under Jovian Atmospheric Conditions

Laboratory spectral data reported last year have been used to investigate the line mixing behavior of hydrogen-broadened ammonia inversion lines. The data show that broadening parameters appearing in the modified Ben-Reuven opacity formalism of Berge and Gulkis (1976) cannot maintain constant values over pressure ranges that include low to moderate pressures and high pressures. Also, they cannot change drastically in value, as in the Spilker (1990) revision of the Berge and Gulkis formalism. It has long been recognized that at low pressures, less than about 1 bar of a Jovian atmospheric mixture, a VVW formalism yields more accurate predictions of ammonia opacity than Ben-Reuven formalisms. At higher pressures the Ben-Reuven formalisms are more accurate. Since the Ben-Reuven lineshape collapses to a VVW lineshape in the low pressure limit, this low pressure inaccuracy of the Ben-Reuven formalisms is surprising. By incorporating various behavior, a new formalism is produced that is more accurate than previous formalisms, particularly in the critical 'transition region' from 0.5 to 2 bars, and that can be used without discontinuity from pressures of zero to hundreds of bars. The new formalism will be useful in such applications as interpretation of radio astronomical and radio occultation data on giant planet atmospheres, and radiative transfer modeling of those atmospheres.

inversion lines formalisms radiative transfer mode↗

NASA NTRS2008

System for the diagnosis and monitoring of coronary artery disease, acute coronary syndromes, cardiomyopathy and other cardiac conditions

Cardiac electrical data are received from a patient, manipulated to determine various useful aspects of the ECG signal, and displayed and stored in a useful form using a computer. The computer monitor displays various useful information, and in particular graphically displays various permutations of reduced amplitude zones and kurtosis that increase the rapidity and accuracy of cardiac diagnoses. New criteria for reduced amplitude zones are defined that enhance the sensitivity and specificity for detecting cardiac abnormalities.

Schlegel, Todd T.↗

NASA NTRSDate not supplied

Developing Deep Learning Models for System Remaining Useful Life Predictions: Application to Aircraft Engines

Prognostics and health management (PHM) is an important part of ensuring reliable operations of complex safety- critical systems. System-level remaining useful life (RUL) estimation is a much more complex problem than making estimations at the component level, and system-level RUL methodologies remain sparse in the literature. Model-based approaches have traditionally worked in the past for components such as capacitors, MOSFETs, batteries, or hard-drives (to name a few examples), but developing high fidelity dynamics models of cyber physical systems that can be used to study the effects of multiple degrading components in the system remains a challenging task. Some initial work on model-based System RUL predictions was demonstrated in Khorasgani, et al [1], but, to generalize the system-level prognostics problem, we have to resort to pure data driven and hybrid approaches. In this work, we propose an end-to-end data- driven framework for developing deep learning models to predict remaining useful life of cyber physical systems operating under unknown faulty conditions. The raw data is organized with a data schema that improves the model development process and down stream data analysis tasks. Due to the unknown faulty conditions, the raw sensor data is transformed into signals that expose the underlying degradation processes, which are then used for model development. Bayesian Optimization is used to tune the model parameters prior to training and validation. We show that this approach results in accurate predictions within 3 cycles to end of life (EOL). We demonstrate the effectiveness of our approach by applying it to the N-CMAPSS turbofan engine dataset recently released by NASA, which includes high fidelity degradation modeling, real world operating conditions, and a large set of fault operating modes.

Prognostics↗

NASA NTRS1979

Seasat-A ASVT: Commercial demonstration experiments. Results analysis methodology for the Seasat-A case studies

The SEASAT-A commercial demonstration program ASVT is described. The program consists of a set of experiments involving the evaluation of a real time data distributions system, the SEASAT-A user data distribution system, that provides the capability for near real time dissemination of ocean conditions and weather data products from the U.S. Navy Fleet Numerical Weather Central to a selected set of commercial and industrial users and case studies, performed by commercial and industrial users, using the data gathered by SEASAT-A during its operational life. The impact of the SEASAT-A data on business operations is evaluated by the commercial and industrial users. The approach followed in the performance of the case studies, and the methodology used in the analysis and integration of the case study results to estimate the actual and potential economic benefits of improved ocean condition and weather forecast data are described.

Source record↗

NASA NTRS1972

Gas-injection-start and shutdown characteristics of a 2-kilowatt to 15-kilowatt Brayton power system

Two methods of starting the Brayton power system have been considered: (1) using the alternator as a motor to spin the Brayton rotating unit (BRU), and (2) spinning the BRU by forced gas injection. The first method requires the use of an auxiliary electrical power source. An alternating voltage is applied to the terminals of the alternator to drive it as an induction motor. Only gas-injection starts are discussed in this report. The gas-injection starting method requires high-pressure gas storage and valves to route the gas flow to provide correct BRU rotation. An analog computer simulation was used to size hardware and to determine safe start and shutdown procedures. The simulation was also used to define the range of conditions for successful startups. Experimental data were also obtained under various test conditions. These data verify the validity of the start and shutdown procedures.

Cantoni, D. A.↗

NASA NTRSDate not supplied

Evaluating the Efficacy of Conditional Variational Autoencoders in Generating Synthetic Single Nuclei RNA-Seq Data for Space Biology Research

Astronauts are subject to unique stressors during spaceflight, leading to changes in their cellular function. However, neither astronauts nor model organisms respond the same to spaceflight, and research implicates a contribution of omics components in differential responses. Understanding how gene expression affects astronaut health is critical for the success of long-term space missions, prompting interest in developing personalized predictive models leveraging artificial intelligence (AI) and machine learning (ML) techniques. Developing such models requires extensive data, which is challenging to obtain and share. This study explores the use of conditional variational autoencoders (CVAEs) to synthetically generate single-nuclei RNA-seq (snRNA-seq) data. CVAEs build on standard variational autoencoders (VAEs) by conditioning data generation on covariates like sample identity and mission parameters, enhancing the relevance of generated data for specific contexts. For our work, we built two CVAEs with varying degrees of sparsity to optimize both interpretability and generative power. We train and validate models on existing snRNA-seq data collected from the brain tissue of mice subjected to spaceflight conditions and their ground control counterparts. We evaluate model performance using statistical tests and visualizations to compare synthetic data to real data. We aim to demonstrate that these prototype CVAE architectures could be used in future space biology work and that this is a method worth further exploring.

Sarah Golts↗

NASA NTRS1989

Static and free-vibrational response of semi-circular graphite-epoxy frames with thin-walled open sections

Experiments were conducted to measure the three-dimensional static and free vibrational response of two graphite-epoxy, thin-walled, open section frames. The frames are semi-circular with a radius of three feet, and one specimen has an I cross section and the other has a channel cross section. The flexibility influence coefficients were measured in static tests for loads applied at midspan with the ends of the specimens clamped. Natural frequencies and modes were determined from vibrational tests for free and clamped end conditions. The experimental data is used to evaluate a new finite element which was developed specifically for the analysis of curved, thin-walled structures. The formulation of the element is based on a Vlasov-type, thin-walled, curved beam theory. The predictions from the finite element program generally correlated well with the experimental data for the symmetric I-specimen. Discrepancies in some of the data were found to be due to flexibility in the clamped end conditions. With respect to the data for the channel specimen, the correlation was less satisfactory. The finite element analysis predicted the out-of-plane response of the channel specimen reasonably well, but large discrepancies occurred between the predicted in-plane response and the experimental data. The analysis predicted a much more compliant in-plane response than was observed in the experiments.

Collins, J. Scott↗

NASA NTRS2012

Biases in Long-term NO2 Averages Inferred from Satellite Observations Due to Cloud Selection Criteria

Retrievals of atmospheric trace gas column densities from space are compromised by the presence of clouds, requiring most studies to exclude observations with significant cloud fractions in the instrument's field of view. Using NO2 observations at three ground stations representing urban, suburban, and rural environments, and tropospheric vertical column densities measured by the Ozone Monitoring Instrument (OMI) over each site, we show that the observations from space represent monthly averaged ground-level pollutant conditions well (R=0.86) under relatively cloud-free conditions. However, by analyzing the ground-level data and applying the OMI cloud fraction as a filter, we show there is a significant bias in long-term averaged NO2 as a result of removing the data during cloudy conditions. For the ground-based sites considered in this study, excluding observations on days when OMI-derived cloud fractions were greater than 0.2 causes 12:00-14:00 mean summer mixing ratios to be underestimated by 12%+/-6%, 20%+/-7%, and 40%+/-10% on average (+/-1 standard deviation) at the urban, suburban, and rural sites respectively. This bias was investigated in particular at the rural site, a region where pollutant transport is the main source of NO2, and where longterm observations of NOy were also available. Evidence of changing photochemical conditions and a correlation between clear skies and the transport of cleaner air masses play key roles in explaining the bias. The magnitude of a bias is expected to vary from site to site depending on meteorology and proximity to NOx sources, and decreases when longer averaging times of ground station data (e.g. 24-h) are used for the comparison.

SEASONAL-VARIATIONS↗

NASA NTRS1989

Data compression for the microgravity experiments

Researchers present the environment and conditions under which data compression is to be performed for the microgravity experiment. Also presented are some coding techniques that would be useful for coding in this environment. It should be emphasized that researchers are currently at the beginning of this program and the toolkit mentioned is far from complete.

Sayood, Khalid↗

NASA NTRS1977

Usefulness of LANDSAT data for monitoring plant development and range conditions in California's annual grassland

A network of sampling sites throughout the annual grassland region was established to correlate plant growth in stages and forage production to climatic and other environmental factors. Plant growth and range conditions were further related to geographic location and seasonal variations. A sequence of LANDSAT data was obtained covering critical periods in the growth cycle. Data were analyzed by both photointerpretation and computer aided techniques. Image characteristics and spectral reflectance data were then related to forage production, range condition, range site, and changing growth conditions.

Carneggie, D. M.↗

NASA NTRS1990

Earth Radiation Budget Experiment (ERBE) validation

During the past 4 years, data from the Earth Radiation Budget Experiment (ERBE) have been undergoing detailed examination. There is no direct source of groundtruth for the radiation budget. Thus, this validation effort has had to rely heavily upon intercomparisons between different types of measurements. The ERBE SCIENCE Team chose 10 measures of agreement as validation criteria. Late in August 1988, the Team agreed that the data met these conditions. As a result, the final, monthly averaged data products are being archived. These products, their validation, and some results for January 1986 are described. Information is provided on obtaining the data from the archive.

Barkstrom, Bruce R.↗

NASA NTRS1992

Boundary layer study on nozzle wall at hypersonic velocities

The boundary layer on the wall of the Hypervelocity Tunnel 9 was investigated with pitot pressure and total temperature measurements. Experimental results are presented for standard and supercooled Mach 14 runs. The boundary layer data at supercooled conditions are compared to numerical predictions made with a Navier-Stokes algorithm including vibrational nonequilibrium and intermolecular force effects. For standard tunnel conditions, the numerical solutions agree well with experimental data. For the supercooled cases, the numerical code predicts the total temperature but overpredicts the pitot pressure.

Jones, Kenneth M.↗