Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “damage modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Co-administration of liposomal fasudil and tissue plasminogen activator ameliorated ischemic brain damage in occlusion model rats prepared by photochemically induced thrombosis

Highlights: • Thrombolytic agent t-PA increased liposome accumulation in ischemic brain. • Liposome accumulation was observed in wide area of ischemic region by t-PA treatment. • Extravasation of injected liposomes into brain parenchyma was facilitated by t-PA. • Co-administration of liposomal fasudil and t-PA ameliorated ischemic brain damage. Delivery of neuroprotectants with liposomes has been shown to be effective for the treatment of ischemic stroke. We have recently revealed that intravenous administration of liposomal fasudil (Fasudil-Lip), a Rho-kinase inhibitor, prior to thrombolysis with tissue plasminogen activator (t-PA) can extend the narrow therapeutic time window (TTW) of t-PA. In the present study, we examined the influence of t-PA treatment on liposomal accumulation into the ischemic region and cerebroprotective effect of combined treatment with Fasudil-Lip and t-PA performed at the same timing after the onset of ischemia in middle cerebral artery occlusion (MCAO) prepared by photochemically induced thrombosis. The t-PA administration into MCAO rats 3 h after occlusion brought about significantly higher accumulation of intravenously injected PEGylated liposomes in wide area of ischemic region. Confocal images showed that extravasation of the liposomes from cerebral vessels into brain parenchyma was markedly facilitated by the t-PA treatment which increased blood flow in cerebral vessels. Importantly, co-administration of Fasudil-Lip and t-PA after 3 h occlusion, beyond the TTW of t-PA in MCAO rats, significantly suppressed brain cell damage compared with t-PA treatment alone. These findings suggest that co-administration of Fasudil-Lip and t-PA should lead to prolong t-PA's TTW and become a useful therapeutic option for ischemic stroke.

60 APPLIED LIFE SCIENCES↗

A model for correlating damage and ultrasonic attenuation in composites

Ultrasonic attenuation data measured by the pulse-echo technique have been obtained versus load for two graphite-epoxy laminates and are presented. The attenuation-load data display distinct changes at load values associated with the initiation of transverse cracks in the weakest plies and with the knee in the bilinear stress-strain curve. It was intended to determine if a simplified diffraction model could be used to account for the attenuation changes. The basis of the diffraction model is that transverse cracks or delaminations, or both, initiating and progressing in the specimen under the area covered by the ultrasonic transducer would cause diffraction of the ultrasonic beam and changes in the measured attenuation.

Hayford, D. T.↗

Analysis and Characterization of Damage and Failure Utilizing a Generalized Composite Material Model Suitable for Use in Impact Problems

A material model which incorporates several key capabilities which have been identified by the aerospace community as lacking in state-of-the art composite impact models is under development. In particular, a next generation composite impact material model, jointly developed by the FAA and NASA, is being implemented into the commercial transient dynamic finite element code LS-DYNA. The material model, which incorporates plasticity, damage, and failure, utilizes experimentally based tabulated input to define the evolution of plasticity and damage and the initiation of failure as opposed to specifying discrete input parameters (such as modulus and strength). The plasticity portion of the orthotropic, three-dimensional, macroscopic composite constitutive model is based on an extension of the Tsai-Wu composite failure model into a generalized yield function with a non-associative flow rule. For the damage model, a strain equivalent formulation is utilized to allow for the uncoupling of the deformation and damage analyses. In the damage model, a semi-coupled approach is employed where the overall damage in a particular coordinate direction is assumed to be a multiplicative combination of the damage in that direction resulting from the applied loads in the various coordinate directions. Due to the fact that the plasticity and damage models are uncoupled, test procedures and methods to both characterize the damage model and to covert the material stress-strain curves from the true (damaged) stress space to the effective (undamaged) stress space have been developed. A methodology has been developed to input the experimentally determined composite failure surface in a tabulated manner. An analytical approach is then utilized to track how close the current stress state is to the failure surface.

Finite Element Method↗

Simulating ice-shelf extent using damage mechanics

Abstract Inaccurate representations of iceberg calving from ice shelves are a large source of uncertainty in mass-loss projections from the Antarctic ice sheet. Here, we address this limitation by implementing and testing a continuum damage-mechanics model in a continental scale ice-sheet model. The damage-mechanics formulation, based on a linear stability analysis and subsequent long-wavelength approximation of crevasses that evolve in a viscous medium, links damage evolution to climate forcing and the large-scale stresses within an ice shelf. We incorporate this model into the BISICLES ice-sheet model and test it by applying it to idealized (1) ice tongues, for which we present analytical solutions and (2) buttressed ice-shelf geometries. Our simulations show that the model reproduces the large disparity in lengths of ice shelves with geometries and melt rates broadly similar to those of four Antarctic ice shelves: Erebus Glacier Tongue (length ~ 13 km), the unembayed portion of Drygalski Ice Tongue (~ 65 km), the Amery Ice Shelf (~ 350 km) and the Ross Ice Shelf (~ 500 km). These results demonstrate that our simple continuum model holds promise for constraining realistic ice-shelf extents in large-scale ice-sheet models in a computationally tractable manner.

54 ENVIRONMENTAL SCIENCES↗

Fatigue behavior analysis and multi-scale modelling of chopped carbon fiber chip-reinforced composites under tension-tension loading condition

Here, the fatigue damage behavior of chopped carbon fiber chip-reinforced composite has been experimentally and numerically investigated. A large scatter is exhibited in the S-N diagram due to the random distribution of carbon fiber chips, and therefore a new analysis procedure is proposed to link the local microstructure to the fatigue behavior of the bulk material. Interrupted fatigue tests are also performed so that microstructure characterization can be conducted on the tested samples to analyze the crack initiation and propagation. Inspired from the experimental findings, a multi-scale progressive damage fatigue model is proposed to predict the fatigue behavior. The model incorporates a new stochastic chip-packing algorithm for microstructure reconstruction along with continuum damage models into the representative volume element (RVE) model in ABAQUS/Explicit. Finally, the simulation results based on the proposed model are in good agreement with the experimental data in terms of cracking modes and predicted life.

36 MATERIALS SCIENCE↗

Calibration of CDM-Based Creep Constitutive Model Using Accelerated Creep Test (ACT) Data

In conventional creep testing (CCT) a specimen is subject to constant load and temperature for a long-duration until creep rupture occurs. Conventional testing can be costly when considering the number of experiments needed to characterize the creep response of a material over a range of stress and temperature. To predict long-term creep-rupture properties, the time-temperature-stress superposition principle (TTSSP) approach has been employed where stress and/or temperature is applied at an elevated level; the result of which are extrapolated down to low stress and/or temperature conditions. These methods have been successful in predicting minimum-creep-strain-rate (MCSR) and stress-rupture (SR) but suffer from an inability to predict the creep deformation curve or account for changes in deformation mechanisms or aging that occurs at long-duration. An accelerated technique, termed the Stepped isostress method (SSM) allows the accelerated testing of materials to determine their creep deformation response. Unlike TTSSP tests, the SSM test employs a single specimen where the stress is periodically step increased until rupture. The SSM creep deformation curve is processed (time and strain shifted) to produce an accelerated creep deformation curve that represent the creep deformation curve at the initial stress level in SSM. A processing procedure for metals has yet to be developed. The research objective of this study is to develop a processing procedure for SSM test data using a creep-damage constitutive model. Triplicate SSM tests were conducted on Ni-based superalloy Inconel 718 at 650°C with stress being periodically increased until rupture. Triplicate CCT tests were conducted at the initial stress level of the SSM tests. The Sine-hyperbolic (Sinh) creep-damage model was employed in this study. The Sinh creep-damage constitutive model is based on coupled creep strain rate and damage evolution equations; where both rates are dependent on the current state of damage. Calibration is two-step: analytical and numerical optimization. Each stepped creep deformation curve is tackled quasi-analytically to determine MCSR and SR related material constants and accumulated damage. The damage accumulated at the end of each step was then passed onto subsequent steps to calibrate the MCSR, rupture prediction, and damage evolution. Numerical optimization was applied to optimize model constants involved in the creep strain constitutive equations in order to generate best-fitted Sinh creep deformation curves. The Sinh model predictions were compared to the SSM and CCT data. The Sinh model satisfactorily predicts the SSM data and thus the calibrated material constants provides a good estimate of rupture found in the CCT data. Calibration using SSM data reduces the number of tests needed to calibrate a model; significantly reducing costs. A single SSM test replaces numerous creep tests at different stresses.

36 MATERIALS SCIENCE↗

Multiphysics Platform for Simulation of Concrete Degradation

This report documents the development of computational tools for concrete degradation processes and their effects on structures in the BlackBear multiphysics simulation environment. This project has developed capabilities for nonlinear mechanical constitutive modeling of concrete, and for simulation of multiple interacting chemical species involved in important concrete degradation mechanisms, coupled with heat and moisture transport models. Two nonlinear mechanical constitutive models implemented in BlackBear: a simple damage mechanics model, and a more comprehensive damaged plasticity model. Also, a coupled species transport model based on the Nernst-Planck equations has been implemented.

42 ENGINEERING↗

A differential CDM model for fatigue of unidirectional metal matrix composites

A multiaxial, isothermal, continuum damage mechanics (CDM) model for fatigue of a unidirectional metal matrix composite volume element is presented. The model is phenomenological, stress based, and assumes a single scalar internal damage variable, the evolution of which is anisotropic. The development of the fatigue damage model, (i.e., evolutionary law) is based on the definition of an initially transversely isotropic fatigue limit surface, a static fracture surface, and a normalized stress amplitude function. The anisotropy of these surfaces and function, and therefore the model, is defined through physically meaningful invariants reflecting the local stress and material orientation. This transversely isotropic model is shown, when taken to it's isotropic limit, to directly simplify to a previously developed and validated isotropic fatigue continuum damage model. Results of a nondimensional parametric study illustrate (1) the flexibility of the present formulation in attempting to characterize a class of composite materials, and (2) the capability of the formulation in predicting anticipated qualitative trends in the fatigue behavior of unidirectional metal matrix composites. Also, specific material parameters representing an initial characterization of the composite system SiC/Ti 15-3 and the matrix material (Ti 15-3) are reported.

Arnold, S. M.↗

Investigation and modeling of optics damage in high-power laser systems caused by light backscattered in plasma at the target

High-power laser facilities may be restricted in operations by the risk of damage to optics due to the backscattering of laser light from the intended target. A portion of this backscattered light can re-enter the beam line and at sufficient fluence may damage (burn) optical apparatus. Here, the observed cumulative burn pattern on mirrors at the National Ignition Facility (NIF) due to stimulated Brillouin scattering (SBS) at the target is explained using detailed simulations. Our methodology involves using a measurement of a phase plate profile installed at the NIF to provide the laser input to a three-dimensional simulation of laser-plasma interaction in a target typical of that fielded at the NIF. Light scattered by SBS at the target is then followed back to the final aperture of the beam line, back through the phase plate, and to a mirror where damage typically occurs. We find that mirror damage patterns are largely dictated by the phase imprint of the phase plate on the returning SBS light. Our simulations show that the instantaneous SBS signal at the mirror varies on a picosecond time scale and is also highly modulated in space. Temporal averaging of the simulated SBS light pattern on the mirror reveals a pattern in close agreement with the experimentally observed damage. Finally, understanding these burn patterns (distribution, modulation depth) may lead to future phase plate designs that limit damage throughout the optics assembly of high-powered laser facilities.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Modeling of radiation damage in silicon solar cells

One MeV electron irradiation produces preponderantly isolated vacancy interstitial pairs. If neither of these defects is mobile, the concentration of each grows linearly with fluence. Annealing of damage depends on the nature of the damage. Vacancy interstitial pairs which are bound by an interaction such that they mutually annihilate rather than dissociate are termed close pairs; close pair recovery usually occurs at a lower temperature than the temperature at which long distance defect migration occurs. Annealing of the remaining frozen in damage occurs when a temperature is reached where the vacancy or interstitial is mobile; usually the interstitial is more mobile than the vacancy. The recovery occurs in two regimes which may be resoluable.

Oehrlein, G.↗

High Strain Rate Response of Adhesively Bonded Fiber-Reinforced Composite Joints – A Computational Study to Guide Experimental Design

Adhesively bonded carbon fiber-reinforced epoxy composite laminates are widely used in aerospace applications. During a high energy impact event, these laminates are often subjected to high strain rate loading. However, the influence of high strain rate loading on the response of these composite joints is not well understood. Computational finite element (FE) modeling and simulations are conducted to guide the design of high strain rate experiments. Two different experimental designs based on split Hopkinson bar were numerically modeled to simulate Mode I and Mode II types loading in the composite. In addition, the computational approach adopted in this study helps in understanding the high strain rate response of adhesively bonded composite joints subjected to nominally Mode I and Mode II loading. The modeling approach consists of a ply-level 3D FE model, a progressive damage constitutive model for the composite material behavior and a cohesive tie-break contact element for interlaminar delamination.

Ravindran, Suraj↗

Crystalline and amorphous models of highly damaged Fe

The structure of irradiated material near a primary knock on atom shortly after impact is largely unknown. Molecular dynamics simulations with classical force fields provide the foundation for our current understanding of the resulting cascade. Atomic level structural characterization is often in terms defects within the context of a perfect bulk, however, the choice of the best representation is complicated because the density of defects is high, the material is inhomogeneous and it is not in equilibrium. Here we explore the adaptation of tools typically employed to characterize homogeneous equilibrium liquids to the highly defected region of the cascade. The cascade structure shows some resemblance to that of the liquid or glass phase. The local temperature temporarily exceeds the melting temperature and the free energies of the liquid and defected crystal are comparable. Analysis of cascade structure will be important to the interpretation of first principles calculations of the electronic and magnetic states in cascade structures.

36 MATERIALS SCIENCE↗