Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “continuum modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27
All sourcesNASA NTRSDOE OSTI
NASA NTRS2011

The Extreme Spin of the Black Hole in Cygnus X-1

The compact primary in the X-ray binary Cygnus X-1 was the first black hole to be established via dynamical observations. We have recently determined accurate values for its mass and distance, and for the orbital inclination angle of the binary. Building on these results, which are based on our favored (asynchronous) dynamical model, we have measured the radius of the inner edge of the black hole s accretion disk by fitting its thermal continuum spectrum to a fully relativistic model of a thin accretion disk. Assuming that the spin axis of the black hole is aligned with the orbital angular momentum vector, we have determined that Cygnus X-1 contains a near-extreme Kerr black hole with a spin parameter a* > 0.95 (3(sigma)). For a less probable (synchronous) dynamical model, we find a. > 0.92 (3 ). In our analysis, we include the uncertainties in black hole mass, orbital inclination angle, and distance, and we also include the uncertainty in the calibration of the absolute flux via the Crab. These four sources of uncertainty totally dominate the error budget. The uncertainties introduced by the thin-disk model we employ are particularly small in this case given the extreme spin of the black hole and the disk s low luminosity.

Gou, Lijun↗
NASA NTRS2019

Modeling Mg II During Solar Flares. I. Partial Frequency Redistribution, Opacity, and Coronal Irradiation

The Interface Region Imaging Spectrograph has routinely observed the flaring Mg II near-ultraviolet (NUV) spectrum, offering excellent diagnostic potential and a window into the location of energy deposition. A number of studies have forward-modeled both the general properties of these lines and specific flare observations. Generally these have forward-modeled radiation via post-processing of snapshots from hydrodynamic flare simulations through radiation transfer codes. There has, however, not been a study of how the physics included in these radiation transport codes affects the solution. A baseline setup for forward-modeling Mg II in flares is presented and contrasted with approaches that add or remove complexity. It is shown for Mg II that (1) partial frequency distribution (PRD) is still required during flare simulations despite the increased densities; (2) using full angle-dependent PRD affects the solution but takes significantly longer to process a snapshot; (3) including Mg I in non-LTE (NLTE) results in negligible differences to the Mg II lines but does affect the NUV quasi-continuum; (4) only hydrogen and Mg II need to be included in NLTE; (5) ideally the nonequilibrium hydrogen populations, with nonthermal collisional rates, should be used rather than the statistical equilibrium populations; (6) an atom consisting of only the ground state, h and k upper levels, and continuum level is insufficient to model the resonance lines; and (7) irradiation from a hot, dense flaring transition region can affect the formation of Mg II. We discuss modifications to the RH code allowing straightforward inclusion of the transition region and coronal irradiation in flares.

Kerr, Graham S.↗
NASA NTRS2022

The Transformation and Export of Organic Carbon Across an Arctic River-Delta-Ocean Continuum

The Arctic Ocean is surrounded by land that feeds highly seasonal rivers with water enriched in high concentrations of dissolved and particulate organic carbon (DOC and POC). Explicit estimates of the flux of organic carbon across the land-ocean interface are difficult to quantify and many interdependent processes makes source attribution difficult. A high-resolution 3-D biogeochemical model was built for the lower Yukon River and coastal ocean to estimate biogeochemical cycling across the land-ocean continuum. The model solves for complex reactions related to organic carbon transformation, including mechanistic photodegradation and multi-reactivity microbial processing, DOC to POC flocculation, and phytoplankton dynamics. The baseline DOC and POC flux out of the delta from April to September 2019, was 977 and 536 Gg C (~80% of the annual total), but only 50% of the DOC and 25% of the POC exited the plume across the 10 m isobath. Microbial breakdown of DOC accounted for a net loss of 168 Gg C (17% of delta export) within the plume and photodegradation accounted for a net loss of 46.6 Gg C DOC (5% of delta export) in 2019. Flocculation decreased the total organic carbon flux by only 6.4 Gg C (~1%), while POC sinking accounted for 63.3 Gg C (10%) settling in the plume. The loss of chromophoric dissolved organic matter (CDOM) due to photodegradation increased the light available for phytoplankton growth throughout the coastal ocean, demonstrating the secondary effects that organic carbon reactions can have on biological processes and the net coastal carbon flux.

Land-Ocean Continuum↗
NASA NTRS1990

Creep and creep rupture of strongly reinforced metallic composites

A creep and creep damage theory is presented for metallic composites with strong fibers. Application is to reinforced structures in which the fiber orientation may vary throughout but a distinct fiber direction can be identified locally (local transverse isotropy). The creep deformation model follows earlier work and is based on a flow potential function that depends on invariants reflecting stress and the material symmetry. As the focus is on the interaction of creep and damage, primary creep is ignored. The creep rupture model is an extension of continuum damage mechanics and includes an isochronous damage function that depends on invariants specifying the local maximum transverse tension and the maximum longitudinal shear stress. It is posited that at high temperature and low stress, appropriate to engineering practice, these stress components damage the fiber/matrix interface through diffusion controlled void growth, eventually causing creep rupture. Experiments are outlined for characterizing a composite through creep rupture tests under transverse tension and longitudinal shear. Application is made to a thin-walled pressure vessel with reinforcing fibers at an arbitrary helical angle. The results illustrate the usefulness of the model as a means of achieving optimal designs of composite structures where creep and creep rupture are life limiting.

Robinson, D. N.↗
NASA NTRS1979

A marching method for calculating line and continuum radiation in high energy flow fields

A method is presented for calculating nongrey radiative fluxes and intensities in a highly ionized, low temperature plasma with extreme line broadening. The method was developed to study radiative heating phenomena in the mass-injected hypersonic shock-layer environments characteristic of outer planet atmospheric entry, although it is not limited to such studies. The radiative properties model assumed local thermodynamic equilibrium and used standard continuum and molecular band models. The atomic line model, however, used a frequency-marching method for the frequency integration, which not only accounted completely for line overlapping (reabsorption) effects, but compared favorably in economy with the best equivalent-width methods. An assessment of hydrogen line-far-wing treatments, with recommendations for engineering models, is also presented.

Bolz, C. W., Jr.↗
NASA NTRS1989

Physics of the central engine

Physical processes which may be important in the central engines of AGNs are discussed. Black hole accretion models have been elaborated during the past few years, and provide a plausible framework for jet and spectrum formation. However, the specific mechanisms responsible for producing the observed continuum radiation remain uncertain. Consideration is given to nonthermal models for the IR continuum, constraints on thermal plasma, and the production of relativistic electrons.

Begelman, Mitchell C.↗
NASA NTRS1997

Model For Dense Molecular Cloud Cores

We present a detailed theoretical model for the thermal balance, chemistry, and radiative transfer within quiescent dense molecular cloud cores that contain a central protostar. In the interior of such cores, we expect the dust and gas temperatures to be well coupled, while in the outer regions CO rotational emissions dominate the gas cooling and the predicted gas temperature lies significantly below the dust temperature. Large spatial variations in the gas temperature are expected to affect the gas phase chemistry dramatically; in particular, the predicted water abundance varies by more than a factor of 1000 within cloud cores that contain luminous protostars. Based upon our predictions for the thermal and chemical structure of cloud cores, we have constructed self-consistent radiative transfer models to compute the line strengths and line profiles for transitions of (12)CO, (13)CO, C(18)O, ortho- and para-H2(16)O, ortho- and para-H2(18)O, and O I. We carried out a general parameter study to determine the dependence of the model predictions upon the parameters assumed for the source. We expect many of the far-infrared and submillimeter rotational transitions of water to be detectable either in emission or absorption with the use of the Infrared Space Observatory (ISO) and the Submillimeter Wave Astronomy Satellite. Quiescent, radiatively heated hot cores are expected to show low-gain maser emission in the 183 GHz 3(sub 13)-2(sub 20) water line, such as has been observed toward several hot core regions using ground-based telescopes. We predict the (3)P(sub l) - (3)P(sub 2) fine-structure transition of atomic oxygen near 63 micron to be in strong absorption against the continuum for many sources. Our model can also account successfully for recent ISO observations of absorption in rovibrational transitions of water toward the source AFGL 2591.

Doty, Steven D.↗
NASA NTRS2002

Two Types of Soft X-ray Spectra in Cataclysmic Variables

We present results of analyses of Chandra HETG soft X-ray spectra (Lambda = 1.5-25 A) of seven cataclysmic variables. We find that these spectra divide unambiguously into two distinct types. Spectra of the first type, consisting of EX Hya, V603 Aql, U Gem, and SS Cyg, are remarkably well fit by a simple cooling flow model, which assumes only steady-state isobaric radiative cooling. This model has only two free parameters, the maximum temperature, kT(sub max), which provides a rough measurement of the depth of the potential well, and the overall normalization, which provides a highly precise measurement of the total accretion rate. Spectra of the second type, consisting of V1223 Sgr, A Psc, and GK Per, are grossly inconsistent with a simple cooling flow model. They instead exhibit a hard continuum, and, in addition, show strong H-like and He-like ion emission but little Fe L-shell emission, which is consistent with expectations for line emission from a photoionized plasma. Using a simple photoionization model, we argue that the observed line emission for these sources can be driven entirely by the hard continuum. The physical significance of these two distinct types of X-ray spectra is also explored.

White, Nicholas E.↗
NASA NTRS1985

Development of a global 3-D magnetohydrodynamic computational model for solar wind/cometary and planetary studies

Progress is reported in the development of a global, 3-D magnetohydrodynamic computational model to quantitatively describe the detailed continuum field and plasma interaction process of the solar wind with cometary and planetary magneto/ionopause shapes. Activities described include enhancements to the present Level 1 model, development of the 3-D gas dynamic flow field solvers for the Level 2 model, and continued development of the 3-D frozen magnetic field solver for the Level 2 model.

Stahara, S. S.↗
NASA NTRS1997

Computational Modeling as a Design Tool in Microelectronics Manufacturing

Plans to introduce pilot lines or fabs for 300 mm processing are in progress. The IC technology is simultaneously moving towards 0.25/0.18 micron. The convergence of these two trends places unprecedented stringent demands on processes and equipments. More than ever, computational modeling is called upon to play a complementary role in equipment and process design. The pace in hardware/process development needs a matching pace in software development: an aggressive move towards developing "virtual reactors" is desirable and essential to reduce design cycle and costs. This goal has three elements: reactor scale model, feature level model, and database of physical/chemical properties. With these elements coupled, the complete model should function as a design aid in a CAD environment. This talk would aim at the description of various elements. At the reactor level, continuum, DSMC(or particle) and hybrid models will be discussed and compared using examples of plasma and thermal process simulations. In microtopography evolution, approaches such as level set methods compete with conventional geometric models. Regardless of the approach, the reliance on empricism is to be eliminated through coupling to reactor model and computational surface science. This coupling poses challenging issues of orders of magnitude variation in length and time scales. Finally, database development has fallen behind; current situation is rapidly aggravated by the ever newer chemistries emerging to meet process metrics. The virtual reactor would be a useless concept without an accompanying reliable database that consists of: thermal reaction pathways and rate constants, electron-molecule cross sections, thermochemical properties, transport properties, and finally, surface data on the interaction of radicals, atoms and ions with various surfaces. Large scale computational chemistry efforts are critical as experiments alone cannot meet database needs due to the difficulties associated with such controlled experiments and costs.

Meyyappan, Meyya↗
NASA NTRS2017

Interaction of Delaminations and Matrix Cracks in a CFRP Plate, Part II: Simulation Using an Enriched Shell Finite Element Model

Numerical simulations are presented of a recently developed test which creates multiple delaminations in a CFRP laminate specimen that grow and interact via transverse matrix cracks. A novel shell element enriched with the Floating Node Method, and a damage algorithm based on the Virtual Crack Closure Technique, were used to successfully simulate the tests. Additionally, a 3D high mesh fidelity model based on cohesive zones and continuum damage mechanics was used to simulate the tests and act as a representative of other similar state-of-the-art high mesh fidelity modeling techniques to compare to the enriched shell element. The enriched shell and high mesh fidelity models had similar levels of accuracy and generally matched the experimental data. With runtimes of 36 minutes for the shell model and 55 hours for the high mesh fidelity model, the shell model is 92 times faster than the high- fidelity simulation.

Mark W McElroy↗
NASA NTRS2012

Computational Implementation of a Thermodynamically Based Work Potential Model For Progressive Microdamage and Transverse Cracking in Fiber-Reinforced Laminates

A continuum-level, dual internal state variable, thermodynamically based, work potential model, Schapery Theory, is used capture the effects of two matrix damage mechanisms in a fiber-reinforced laminated composite: microdamage and transverse cracking. Matrix microdamage accrues primarily in the form of shear microcracks between the fibers of the composite. Whereas, larger transverse matrix cracks typically span the thickness of a lamina and run parallel to the fibers. Schapery Theory uses the energy potential required to advance structural changes, associated with the damage mechanisms, to govern damage growth through a set of internal state variables. These state variables are used to quantify the stiffness degradation resulting from damage growth. The transverse and shear stiffness of the lamina are related to the internal state variables through a set of measurable damage functions. Additionally, the damage variables for a given strain state can be calculated from a set of evolution equations. These evolution equations and damage functions are implemented into the finite element method and used to govern the constitutive response of the material points in the model. Additionally, an axial failure criterion is included in the model. The response of a center-notched, buffer strip-stiffened panel subjected to uniaxial tension is investigated and results are compared to experiment.

Pineda, Evan J.↗
NASA NTRS1984

Brackett-alpha line profiles of young stellar objects

Profiles of the Br-alpha line of H I at a velocity resolution of 45 km/s are presented for the compact imbedded infrared objects BN, S106/IRS 3, GLS 490, GL 961, GL 989, Mon. R2/IRS 2, and for the visible objects LkH-alpha 101, T Tau, and R Mon. A proportionality obtained between Br-alpha luminosity and bolometric luminosity is shown to extend over three orders of magnitude, supporting the idea that the physical conditions and gas motions in the circumstellar envelopes of stellar objects are closely related over a wide range of luminosities. The Br-alpha line strengths are compared to radio continuum flux densities in the context of stellar wind models. Momentum deposition rates deduced from Br-alpha or radio continuum fluxes are consistent with those available in the radiation fields, which appear capable of driving the ionized gas outflows in the vicinity of the core sources. The results of a comparison of the H-alpha and Br-alpha profiles for T Tau are discussed.

Persson, S. E.↗
NASA NTRS1984

Photometric Studies of Heat Flow at the Photosphere

Continuum photometry is carried out and the results of comparing these observations with models of photospheric heat flow are described. The main results are: (1) a possible detection of weak bright rings around some spot penumbrae; (2) no evidence is found for large scale photospheric brightness inhomogeneities exceeding 2-3 K which places tighter constraints on models of global scale convection; (3) supergranular scale continuum structures observed across the photosphere appear mainly due to random clumping of granules; (4) the one case observed of a sunspot emergence shows no thermal shadow exceeding 1.5 K rms one day prior to umbra appearance; (5) network and faculae are found to show a small excess brightness even at mu = 1, so detection of faculae at mu = 1 by differential photometry indicates a gentler temperature gradient near tau = 1 in the facular (relative to cell) atmosphere; (6) the limb darkening study shows no significant global variations to within 0.1% rms.

Foukal, P.↗
NASA NTRS1982

Post-instability in continuous systems. I - Failure of differentiability of solutions in continuum mechanics

It is pointed out that mathematical models of continua are based on certain assumptions regarding functions which must be at least piece-wise differentiable. The assumption about smoothness of the functions makes it possible to use the mathematical technique of differentiable equations. However, this artificial mathematical limitation follows neither from the principles of mechanics nor from the definition of a continuum. The price paid for such a mathematical convenience is instability (in the class of smooth functions) of the solutions to the corresponding governing equations in some regions of the parameters. A new mathematical technique should, therefore, be developed to describe the solutions which are not necessarily differentiable. The present investigation is concerned with the criteria of applicability of the classical models of continua from the view point of stability of the corresponding solutions, postinstability models derived by reformulation of the original models, and postinstability models in enlarged classes of functions.

Zak, M.↗
NASA NTRS1970

Axially symmetric model planetary nebulae

Planetary nebulae NGC 7662 and NGC 7009 axially symmetric models from density distributions, H continuum threshold optical depths and central star temperatures

Kirkpatrick, R. C.↗
NASA NTRS1973

Stellar Bragg crystal X-ray spectrometry on OSO-1

A high sensitivity crystal X-ray spectrometer for use on the Orbiting Solar Observatory (mission 1) satellite is described. This instrument will be used to obtain both solar and stellar spectra in the energy range 2 to 8 keV. In the stellar mode, the shape of the continua, the strength of lines, and the strength of recombination and absorption edge were determined. If lines or edges are detected, such data will provide direct evidence regarding the physical conditions in the emitting and absorbing regions. If only upper bounds are established, the data can be used to constrain theoretical models. In any case, precise continuum shapes will be established for a number of the brighter X-ray sources. Numerical estimates of the sensitivity of the instrument for these various purposes are given.

Landecker, P. B.↗