Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “composite structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27
All sourcesNASA NTRSDOE OSTI
NASA NTRS1971

The development of autoclave processable, thermally stable adhesives for titanium alloy and graphite composite structures

The A-type polyimide adhesive resin P11B was modified by use of mixed diamines (thio-dianiline and meta phenylene diamine) which provided the desired autoclave processability. This new resin was termed P11BA. It was shown that copolymeric blends of P11BA and Amoco AI-1137 amide-imide resin provided improved adhesive properties when autoclave processed over the properties obtained previously by press bonding with P11B based copolymeric blended adhesives. Properties of bonded assemblies are presented for long-term aging at both elevated and low temperatures, and also stress-rupture tests at elevated temperature.

Vaughan, R. W.↗
NASA NTRS1974

Proceedings of the workshop on structural composites and nondestructive evaluation

The problems and opportunities in the nondestructive evaluation of composites are covered in formal papers and a summary of the discussion which took place at a Workshop held in Dayton on February 13-14, 1974. The recommendations arrived at by an NMAB Committee, on flaw detection, composite strength, standardization and design information, and research on composite degradation are stated.

Source record↗
NASA NTRS1975

Experimental evaluation of the tensor polynomial failure criterion for the design of composite structures

The experimental measures and techniques are described which are used to obtain the strength tensor components, including cubic terms. Based on a considerable number of biaxial pressure tests together with specimens subjected to a constant torque and internal pressure, a modified form of the plane stress tensor polynomial failure equation was obtained that was capable of predicting ultimate strength results well. Preliminary data were obtained to determine the effect of varying post cure times and ambient temperatures (-80 F to 250 F) on the change in two tensor strength terms, F sub 2 and F sub 22. Other laminate configurations yield corresponding variations for the remaining strength parameters.

Tennyson, R. C.↗
NASA NTRS1976

Foam composite structures

The need to include fire resistant foams into state of the art aircraft interior paneling to increase passenger safety in aircraft fires was studied. Present efforts were directed toward mechanical and fire testing of panels with foam inclusions. Skinned foam filled honeycomb and PBI structural foams were the two constructions investigated with attention being directed toward weight/performance/cost trade-off. All of the new panels demonstrated improved performance in fire and some were lighter weight but not as strong as the presently used paneling. Continued efforts should result in improved paneling for passenger safety. In particular the simple partial filling (fire side) of state-of-the-art honeycomb with fire resistant foams with little sacrifice in weight would result in panels with increased fire resistance. More important may be the retarded rate of toxic gas evolution in the fire due to the protection of the honeycomb by the foam.

Delano, C. B.↗
NASA NTRS1979

A review of issues and strategies in nondestructive evaluation of fiber reinforced structural composites

Techniques for quantitative assessment of the mechanical strength and integrity of fiber composites during manufacture and service and following repair operations are presented. Problems and approaches are discussed relative to acceptance criteria, calibrating standards, and methods for nondestructive evaluation of composites in strength-critical applications. Acousto-ultrasonic techniques provide the methods of choice in this area.

Vary, A.↗
NASA NTRS1979

A review of issues and strategies in nondestructive evaluation of fiber reinforced structural composites

The need for advanced nondestructive evaluation (NDE) techniques for quantitative assessment of the mechanical strength and integrity of fiber composites during manufacture and service and following repair operations is stressed. The discussion covers problems and different approaches in regard to acceptance criteria, calibration standards, and methods for NDE of composites in strength critical applications. Finally, it is concluded that acousto-ultrasonic techniques provide the 'methods of choice' in this area.

Vary, A.↗
NASA NTRS1981

Photoelastic techniques for the complete determination of stresses in composite structures

Three methods of photoelastic analysis are examined. The first method is an extension of the oblique incidence technique in which the model (or the light beam) is rotated about one of the material symmetry axes. In the second method, transmission and reflection photoelastic responses are combined. The third method requires the drilling of small holes and the determination of the fringe orders at selected points on the hole boundary. The three methods are applied to an orthotropic circular disk under diametral compression. Results are compared with strain gage data.

Prabhakaran, R.↗
NASA NTRS1981

Structure, composition and thermal state of the crust in Brazil

Aeromagnetic survey data of the Minas Gerais areas were analyzed and compared with MAGSAT anomaly data. Initially the data set was used to determine the thickness of the magnetized crust. The value obtained is in agreement with crustal models derived from deep seismic sounding and gravity data, indicating that the bottom of the magnetized layer occurs close to the Moho transition. An analysis of the long wavelength pattern indicates that the anomalies form a series of lineations along the magnetic E-W. These are shown to be the result of attenuation. On the MAGSAT total intensity map localized anomalies are superimposed onto an anomaly background formed by alternating positive and negative patches. Implementation and testing of analysis software for MAGSAT data are also discussed.

Pacca, I. I. G.↗
NASA NTRS1981

Structure, composition and thermal state of the crust in Brazil

Efforts in support of a geomagnetic survey of the Brazilian area are described. Software to convert MAGSAT data tapes to the Burroughs/B-6700 binary format was developed and tested. A preliminary analysis of the first total intensity anomaly map was performed and methodologies for more intensive analysis were defined. The sources for correlative geological, aeromagnetic, and gravimetric data are described.

Pacca, I. I. G.↗
NASA NTRS1982

Develop, demonstrate, and verify large area composite structural bonding with polyimide adhesives

The technology required to produce graphite-polyimide structural components with operational capability at 598 K (600 F) is considered. A series of polyimide adhesives was screened for mechanical and physical properties and processibility in fabricating large midplane bonded panels and honeycomb sandwich panels in an effort to fabricate a structural test component of the space shuttle aft body flap. From 41 formulations, LaRC-13, FM34B-18, and a modified LaRC-13 adhesive were selected for further evaluation. The LaRC-13 adhesive was rated as the best of the three adhesives in terms of availability, cost, processibility, properties, and ability to produce void fee large area (12" x 12") midplane bonds. Surface treatments and primers for the adhesives were evaluated and processes were developed for the fabrication of honeycomb sandwich panels of very good quality which was evidenced by rupture in the honeycomb core rather than in the facesheet bands on flatwise tensile strength testing. The fabrication of the adhesively bonded honeycomb sandwich cover panels, ribs, and leading edge covers of Celion graphite/LARC-160 polyimide laminates is described.

Bhombal, B. D.↗
NASA NTRS1981

Photoelastic techniques for the complete determination of stresses in composite structures

Three new methods are proposed for determining the individual values of the principal stresses or strains in an orthotropic birefringent model using transmission photoelastic analysis. One of the methods is an extension of the oblique incidence technique in which the model (or the light beam) is rotated about one of the material symmetry axes. In another method, transmission and reflection photoelastic responses are combined, while in the third method small circular holes are drilled at points of interest and the isochromatic fringe order is measured at selected points on the hole boundary. The three methods are applied to an orthotropic disc under diametral compression and results are compared with strain gage data.

Prabhakaran, R.↗