Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “component effect directions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Small satellites

Satellites smaller than Mimas (r = 195 km) are distinguished by irregular overall shapes and by rough limb topography. Material properties and impact cratering dominate the shaping of these objects. Long fragmentation histories can produce a variety of internal structures, but so far there is no direct evidence that any small satellite is an equilibrium ellipsoid made up of noncohesive gravitationally bound rubble. One many bodies that orbit close to their primary the tidal and rotational components of surface gravity strongly affect the directions of local g and thereby affect the redistribution of regolith by mass wasting. Downslope movement of regolith is extensive on Deimos, and is probably effective on many other small satellites. It is shown that in some cases observed patterns of downslope mass wasting cold produce useful constraints on the satellite's mean density. The diversity of features seen in the few high-resolution images of small satellites currently available suggests that these objects have undergone complex histories of cratering, fragmentation, and regolith evolution.

Thomas, P.↗

A numerical study of the turbulent Ekman layer

The three-dimensional time-dependent turbulent flow in a neutrally stratified Ekman layer over a smooth flat surface was numerically simulated by directly solving the Navier-Stokes equations. Issues addressed using the direct numerical simulation (DNS) fields include the presence or absence of large-scale coherent structures ('longitudinal' or 'roll' vortices) in neutrally stratified Ekman-layer turbulence, the effects of the horizontal component of the angular velocity vector (i.e., latitude), and implications for models of the PBL. Experimental and DNS profiles are compared.

Coleman, G. N.↗

Single-Trial Analysis of V1 Responses Suggests Two Transmission States

Sensory processing in the visual, auditory, and somatosensory systems is often studied by recording electrical activity in response to a stimulus of interest. Typically, multiple trial responses to the stimulus are averaged to isolate the stereotypic response from noise. However, averaging ignores dynamic variability in the neuronal response, which is potentially critical to understanding stimulus-processing schemes. Thus, we developed the multiple component, Event-Related Potential (mcERP) model. This model asserts that multiple components, defined as stereotypic waveforms, comprise the stimulus-evoked response and that these components may vary in amplitude and latency from trial to trial. Application of this model to data recorded simultaneously from all six laminae of V1 in an awake, behaving monkey performing a visual discrimination yielded three components. The first component localized to granular V1, the second was located in supragranular V1, and the final component displayed a multi-laminar distribution. These modeling results, which take into account single-trial response dynamics, illustrated that the initial activation of VI occurs in the granular layer followed by activation in the supragranular layers. This finding is expected because the average response in those layers demonstrates the same progression and because anatomical evidence suggests that the feedforward input in V1 enters the granular layer and progresses to supragranular layers. In addition to these findings, the granular component of the model displayed several interesting trial-to-trial characteristics including (1) a bimodal latency distribution, (2) a latency-related variation in response amplitude, (3) a latency correlation with the supragranular component, and (4) an amplitude and latency association with the multi-laminar component. Direct analyses of the single-trial data were consistent with these model predictions. These findings suggest that V1 has at least 2 transmission states, which may be modulated by various effects such as attention, dynamics in local EEG rhythm, or variation in sensory inputs.

Shah, A. S.↗

Mapping CDOM Concentration in Waters Influenced by the Mississippi River Plume

Colored dissolved organic matter (CDOM) is often an important component of the organic carbon pool in river-dominated coastal margins. CDOM directly influences remote sensing applications through its strong absorption in the UV and blue regions of the spectrum. This effect can complicate the use of chlorophyll a retrieval algorithms and phytoplankton production models that are based on remotely sensed ocean color. As freshwater input is the principle source of CDOM in coastal margins, CDOM distribution can often be described by conservative mixing with open ocean waters and may serve as an optical tracer of riverine water. Hence, there is considerable interest in the ability to accurately measure and map CDOM concentrations as well as understand the processes that govern the optical properties and distribution of CDOM in coastal environments. We are examining CDOM dynamics in the waters influenced by the Mississippi River plume. Our program incorporates discrete samples, flow-through measurements, and remote sensing. CDOM absorption spectra of discrete samples are measured at sea using a portable, multiple pathlength waveguide system. A SAFire multi-spectral fluorescence meter provides spectral characterization of CDOM (fluorescence and absorption) using a ship flow-through system for continuous surface mapping. In situ reflectance spectra are obtained by a hand held spectroradiometer. Remotely sensed images are obtained from the SeaWiFS and CRIS (Coastal Research Imaging Spectrometer) instruments. We describe here the instruments used, sampling protocols employed, and the relationships derived between in situ measurements and remotely sensed data for this optically complex environment.

Miller, Richard L.↗

Performance of PEM Liquid-Feed Direct Methanol-Air Fuel Cells

A direct methanol-air fuel cell operating at near atmospheric pressure, low-flow rate air, and at temperatures close to 60oC would tremendously enlarge the scope of potential applications. While earlier studies have reported performance with oxygen, the present study focuses on characterizing the performance of a PEM liquid feed direct methanol-air cell consisting of components developed in house. These cells employ Pt-Ru catalyst in the anode, Pt at the cathode and Nafion 117 as the PEM. The effect of pressure, flow rate of air and temperature on cell performance has been studied. With air, the performance level is as high as 0.437 V at 300 mA/cm2 (90oC, 20 psig, and excess air flow) has been attained. Even more significant is the performance level at 60oC, 1 atm and low flow rates of air (3-5 times stoichiometric), which is 0.4 V at 150 mA/cm2. Individual electrode potentials for the methanol and air electrode have been separated and analyzed. Fuel crossover rates and the impact of fuel crossover on the performance of the air electrode have also been measured. The study identifies issues specific to the methanol-air fuel cell and provides a basis for improvement strategies.

Methanol-Air Fuel↗

Comparison of High-Speed Images of Lean Blowout for Four National Jet Fuel Combustion Program Fuels

Using the NASA 7-point lean direct injection (LDI) aero gas turbine combustor concept, the effect of fuel composition on lean blowout (LBO) was compared for three National Jet Fuel Combustion Program (NJFCP) fuels and one single-component fuel. The fuels were A-2, an "average" Jet-A with a derived cetane number (DCN) of 49; C-1, which consists primarily of C12 and C16 isoparaffins (Gevo ATJ), with a DCN of 16; C-4, which consists primarily of C9-C16 and C13 isoparaffins (Sasol IPK blended with Gevo), with a DCN of 28; and n-dodecane, with a DCN of 73.5;. Lean blowout was reached by increasing the air flow. Previously-reported results showed the air flow rate at LBO increased with increasing DCN. This presentation examines high speed flame images taken as the flame blew out.

lean blow-out↗

Static seal for turbine engine

A seal structure for a gas turbine engine, the seal structure including first and second components located adjacent to each other and forming a barrier between high and low pressure zones. A seal cavity is defined in the first and second components, the seal cavity extending to either side of an elongated gap extending generally in a first direction between the first and second components. A seal member is positioned within the seal cavity and spans across the elongated gap. The seal member includes first and second side edges extending into each of the components in a second direction transverse to the first direction, and opposing longitudinal edges extending between the side edges generally parallel to the first direction. The side edges include a groove formed therein for effecting a reduction of gas flow around the seal member at the side edges.

42 ENGINEERING↗

Compositional effects on cure kinetics, mechanical properties and printability of dual-cure epoxy/acrylate resins for DIW additive manufacturing

Interest in 3D printing of thermoset resins has increased significantly in recent years. One approach to additive manufacturing of thermoset resins is printing dual-cure resins with direct ink write (DIW). Dual-cure resins are multi-component resins which employ an in situ curable constituent to enable net-shape fabrication while a second constituent and cure mechanism contribute to the final mechanical properties of the printed materials. In this work, the cure kinetics, green strength, printability, and print fidelity of dual-cure epoxy/acrylate thermoset resins are investigated. Resin properties are evaluated as a function of acrylate concentration and in situ UV exposure conditions. The acrylate cure kinetics are probed using photo-differential scanning calorimetry and the impacts of resin composition and UV cure profile on the acrylate extent of conversion are presented. Continuous and pulsed UV cure profiles are shown to affect total conversion due to variances in radical efficiency at different UV intensities and acrylate concentrations. The effects of acrylate concentration on the kinetics of the epoxy thermal cure and the final mechanical properties are also investigated using dynamic mechanical analysis and three-point bend measurements. The glass transition temperature is dependent on formulation, with increasing acrylate content decreasing the T g . However, the room temperature shear moduli, flexural moduli, strength, strain-to-failure, and toughness values are relatively independent of resin composition. The similarity of the final properties allows for greater flexibility in resin formulation and in situ cure parameters, which can enable the printing of complex parts that require high green strength. We found that the in situ UV print intensities and exposure profiles that are necessary to achieve the best print quality are not, in most cases, the conditions that maximize conversion of the acrylate network. Lastly, this highlights the importance of developing optimized resin compositions which enable complete cure of the acrylate network by promoting acrylate dark cure or thermal cure.

36 MATERIALS SCIENCE↗

Chemical Imaging of Atmospheric Particles

Airborne particles are very dynamic and highly reactive components of the Earth’s atmosphere. Their high surface area and water content provide a unique reaction environment for multiphase chemistry that continually modifies particle composition and properties that consequently impact air quality as well as concentrations of gas-phase species. By absorbing and scattering solar and terrestrial radiation, particles directly influence the planet’s radiative balance. Their indirect effects include modifying the nucleation, lifetime, and physical properties of clouds. Due to the sensitivity of the atmospheric environment to all these variables, fundamental studies of chemical transformations of atmospheric particles, their sources, continuously evolving composition, and physical properties are of highest research priority. Accurate descriptions of particles and their effects in the atmosphere require comprehensive information not only on the particle-type populations and their size distributions and concentrations, but also on the diversity and the spatial heterogeneity of chemical components within individual particles. Developments and applications of modern chemical imaging approaches for off-line characterization of atmospheric particles have been at the forefront of modern experimental studies and have resulted in a transformative impact in atmospheric chemistry and physics. This Account presents a synopsis of recent advances in chemical imaging of atmospheric particles collected on substrates during field and laboratory experiments. The unique advantage of chemical imaging methods is that they simultaneously provide two analytical measurements: imaging of particles to assess variability in their individual sizes and morphology, as well as particle specific speciation of their composition and spatial heterogeneity of different chemical components within individual particles. We also highlight analytical chemistry approaches that enable chemical imaging of particles with different levels of elemental and molecular specificity, including applications of multimodal methodologies where the same or similar groups of particles are probed by two or more complementary techniques. These approaches provide unique experimental insights on the nature and sources of particles, understanding their physical properties, atmospheric reactivity, and transformations. Chemical imaging data provide unique experimental input for atmospheric models that simulate aging and changes in particle-type populations, internal composition, and their associated optical and cloud forming properties. Here, we highlight applications of chemical imaging in selected recent studies, discuss their existing limitations, and forecast future research directions for this area.

54 ENVIRONMENTAL SCIENCES↗

DECELERATING RELATIVISTIC TWO-COMPONENT JETS

Transverse stratification is a common intrinsic feature of astrophysical jets. There is growing evidence that jets in radio galaxies consist of a fast low-density outflow at the jet axis, surrounded by a slower, denser, extended jet. The inner and outer jet components then have a different origin and launching mechanism, making their effective inertia, magnetization, associated energy flux, and angular momentum content different as well. Their interface will develop differential rotation, where disruptions may occur. Here we investigate the stability of rotating, two-component relativistic outflows typical for jets in radio galaxies. For this purpose, we parametrically explore the long-term evolution of a transverse cross section of radially stratified jets numerically, extending our previous study where a single, purely hydrodynamic evolution was considered. We include cases with poloidally magnetized jet components, covering hydro and magnetohydrodynamic (MHD) models. With grid-adaptive relativistic MHD simulations, augmented with approximate linear stability analysis, we revisit the interaction between the two jet components. We study the influence of dynamically important poloidal magnetic fields, with varying contributions of the inner component jet to the total kinetic energy flux of the jet, on their non-linear azimuthal stability. We demonstrate that two-component jets with high kinetic energy flux and inner jet effective inertia which is higher than the outer jet effective inertia are subject to the development of a relativistically enhanced, rotation-induced Rayleigh-Taylor-type instability. This instability plays a major role in decelerating the inner jet and the overall jet decollimation. This novel deceleration scenario can partly explain the radio source dichotomy, relating it directly to the efficiency of the central engine in launching the inner jet component. The FRII/FRI transition could then occur when the relative kinetic energy flux of the inner to the outer jet grows beyond a certain threshold.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effects of transverse oscillatory waves on turbulent boundary waves

Studies of the interaction of unsteady (oscillatory) flows with the growth of a turbulent boundary layer on a flat plate have primarily dealt with an oscillatory component in the primary flow direction. Past studies of the 2-D flow have shown little or no increase in the time averaged heat transfer. The present paper deals with a steady axial and an oscillatory transverse flow. It is shown that for such flows the temporal variation for both the turbulent skin friction and heat transfer are such as to yield increased time averaged values.

Matulevich, Jonathan↗

Dispersal behaviour of Euwallacea nr. fornicatus (Coleoptera: Curculionidae: Scolytinae) in avocado groves and estimation of lure sampling range

Abstract Invasive ambrosia beetles in the Euwallacea nr. fornicatus species complex (Coleoptera: Curculionidae: Scolytinae) threaten avocado production in multiple countries. These pests are currently monitored with lures containing quercivorol; α‐copaene was also recently discovered to be an effective attractant. We investigated dispersal behaviour of female E . nr . fornicatus in two Florida avocado groves using mark–release–recapture experiments and laboratory flight mills. Additionally, we estimated the sampling range of quercivorol and α‐copaene lures deployed alone and in tandem. The two‐component lure recaptured 31.2% of marked beetles, which was significantly more than quercivorol (11.2%) or α‐copaene (8.8%) alone. Contour analysis indicated that wind speed and direction can influence the number of females that disperse, as well as the direction and distance of their flight. Two methods were used to estimate sampling range and both of them indicated comparable effective ranges for the three lure treatments, with 80% of marked beetles being recaptured within 30–35 m of the release point. Average total flight distance in laboratory tests was 81.0 m in 24 h, with a maximum distance recorded at 400 m. The combination of quercivorol and α‐copaene lures provides the best detection of pest E . nr. fornicatus in Florida, with a recommended trap spacing of approximately 30 m in surveillance programmes for this pest in avocado groves.

Owens, David↗

Toward Realistic Dynamics of Rotating Orbital Debris, and Implications for Lightcurve Interpretation

Optical observations of rotating space debris near GEO contain important information on size, shape, composition, and rotational states, but these aspects are difficult to extract due to data limitations and the high number of degrees of freedom in the modeling process. For tri-axial rigid debris objects created by satellite fragmentations, the most likely initial rotation state has a large component of initial angular velocity directed along the intermediate axis of inertia, leading to large angular reorientations of the body on the timescale of the rotation period. This lends some support to the simplest possible interpretation of light curves -- that they represent sets of random orientations of the objects of study. However, effects of internal friction and solar radiation are likely to cause significant modification of rotation states within a time as short as a few orbital periods. In order to examine the rotational dynamics of debris objects under the influences of these effects, a set of seven first-order coupled equations of motion were assembled in state form: three are Euler equations describing the rates of change of the components of angular velocity in the body frame, and four describe the rates of change of the components of the unit quaternion. Quaternions are a four-dimensional extension of complex numbers that form a seamless, singularity-free representation of body orientation on S3. The Euler equations contain explicit terms describing torque from solar radiation in terms of spherical harmonics, and terms representing effects of a prescribed rate of internal friction. Numerical integrations of these equations of motion are being performed, and results will be presented. Initial tests show that internal friction without solar radiation torque leads to rotation about the maximum principal axis of inertia, as required, and solar radiation torque is expected to lead to spin-up of objects. Because the axis of maximum rotational inertia tends to be roughly coincident with the normal to the largest projected cross-sectional area, internal friction is expected to lead to reduced variation of light curve amplitudes at a given phase angle, but a large dependence of the same on phase angle. At a given phase angle, databases are generated which contain reflected intensities for comprehensive sets of equally-likely orientations, represented as unit quaternions. When projected onto three dimensions (S2) and color-coded by intensity, the set is depicted as points within a solid, semi-transparent unit sphere, within which all possible reflected intensities for an object at a given phase angle may be inspected simultaneously. Rotational sequences are represented by trajectories through the sphere. Databases are generated for each of a set of phase angles separately, forming a comprehensive dataset of reflected intensities spanning all object orientations and solar phase angles. Symmetries in the problem suggest that preferred rotation states are likely, defined relative to the object-sun direction in inertial space and relative to the maximum principal axis of inertia in the body coordinate system. Such rotation states may greatly simplify the problem of light curve interpretation by reducing the number of degrees of freedom in the problem.

Ojakangas, Gregory W.↗

Applying Risk Science and Stakeholder Engagement to Overcome Environmental Barriers to Marine and Hydrokinetic Energy Projects

The production of electricity from the moving waters of the ocean has the potential to be a viable addition to the portfolio of renewable energy sources worldwide. The marine and hydrokinetic (MHK) industry faces many hurdles, including technology development, challenges of offshore deployments, and financing; however, the barrier most commonly identified by industry, regulators, and stakeholders is the uncertainty surrounding potential environmental effects of devices placed in the water and the permitting processes associated with real or potential impacts. Regulatory processes are not well positioned to judge the severity of harm due to turbines or wave generators. Risks from MHK devices to endangered or protected animals in coastal waters and rivers, as well as the habitats that support them, are poorly understood. This uncertainty raises concerns about catastrophic interactions between spinning turbine blades or slack mooring lines and marine mammals, birds and fish. In order to accelerate the deployment of tidal and wave devices, there is a need to sort through the extensive list of potential interactions that may cause harm to marine organisms and ecosystems, to set priorities for regulatory triggers, and to direct future research. Identifying the risk of MHK technology components on specific marine organisms and ecosystem components can separate perceived from real risk-relevant interactions. Scientists from Pacific Northwest National Laboratory (PNNL) are developing an Environmental Risk Evaluation System (ERES) to assess environmental effects associated with MHK technologies and projects through a systematic analytical process, with specific input from key stakeholder groups. The array of stakeholders interested in the development of MHK is broad, segmenting into those whose involvement is essential for the success of the MHK project, those that are influential, and those that are interested. PNNL and their partners have engaged these groups, gaining valuable information, gathering pertinent feedback on the efficacy of the process, and providing a level of ownership for the risk evaluation process that will encourage adoption of the outcome to inform future MHK siting and permitting decisions. The ERES development process provides the scientific structure to support risk characterization, comparison of tradeoffs, and risk-informed decision-making by project and technology developers, regulatory agencies, and other interested stakeholders. The PNNL team will determine the range and severity of environmental effects of MHK development, leading to the development of mitigation strategies where residual risk remains.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Cognitive and affective components of mental workload: Understanding the effects of each on human decision making behavior

Human factors and ergonomics researchers have recognized for some time the increasing importance of understanding the role of the construct of mental workload in flight research. Current models of mental workload suggest that it is a multidimensional and complex construct, but one that has proved difficult to measure. Because of this difficulty, emphasis has usually been placed on using direct reports through subjective measures such as rating scales to assess levels of mental workload. The NASA Task Load Index (NASA/TLX, Hart and Staveland) has been shown to be a highly reliable and sensitive measure of perceived mental workload. But a problem with measures like TLX is that there is still considerable disagreement as to what it is about mental workload that these subjective measures are actually measuring. The empirical use of subjective workload measures has largely been to provide estimates of the cognitive components of the actual mental workload required for a task. However, my research suggests that these measures may, in fact have greater potential in accurately assessing the affective components of workload. That is, for example, TLX may be more likely to assess the positive and negative feelings associated with varying workload levels, which in turn may potentially influence the decision making behavior that directly bears on performance and safety issues. Pilots, for example, are often called upon to complete many complex tasks that are high in mental workload, stress, and frustration, and that have significant dynamic decision making components -- often ones that involve risk as well.

Nygren, Thomas E.↗

An innovative container for WEEE collection and transport: Details and effects following the adoption

The content of hazardous components in Waste arising from Electrical and Electronic Equipment (WEEE) is a major concern that urges governments and industry to take measures to ensure proper treatment and disposal. Thus, the European Union issued directives to encourage reuse, recycling and other proper forms of recovery of such waste while companies and academics are still studying methods and technologies for optimizing recovery processes. This paper presents an analysis of the logistics process assuring the correct collection, handling, transportation and storing of WEEE. The experience comes from an Italian WEEE treatment plant (TRED Carpi S.r.l.) where a new kind of container has been introduced in order to improve the logistics system. An evaluation framework is described and used in order to compare different system configurations and assess the advantages emerging from adopting proper equipments for WEEE transport and handling.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Efficient Light Harvesting Biotic–Abiotic Nanohybrid System Incorporating Atomically Thin van der Waals Transition Metal Dichalcogenides

Inspired by nature’s light harvesting complex architectures, which bring together, in one unit, several active nanocomponents to harvest light and to flow the harvested energy in precise directions and places, we designed and assembled a biotic/abiotic stepwise energy transfer nanohybrid system that is based on an atomically thin, two-dimensional (2D) van der Waals semiconductor, colloidal quantum dots, and a light harvesting protein. We utilized the van der Waals semiconductor as a 2D platform for bottom-up assembly, connecting nanocomponents via electrostatic self-assembly and layer-by-layer polyelectrolyte deposition. Through bandgap engineering of the self-assembled active components, we created conditions for efficient directional stepwise energy transfer, from optically excited quantum dots, to proteins and finally to the 2D van der Waals semiconductor, here molybdenum diselenide (MoSe 2 ). A field effect transistor incorporating the biotic/abiotic nanohybrid was demonstrated to exhibit enhanced spectral responsivity when compared to the pristine device (2D van der Waals semiconductor only). Furthermore, this is because the biotic/abiotic nanohybrid exhibits enhanced absorption cross section and enhanced light harvesting through the addition of quantum dots and proteins next to MoSe 2 , which in turn leads to enhanced exciton generation in MoSe 2 via energy transfer from quantum dots to proteins and finally to MoSe 2 .

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Contrasting effects of urbanization on vegetation between the Global South and Global North

Urban vegetation, the core component of green infrastructure and critical for sustainable cities, is profoundly affected by the process of urbanization. Urbanization not only leads to substantial vegetation loss (direct impact) but also fosters urban vegetation growth (indirect impact). However, the extent to which these direct and indirect impacts affect vegetation dynamics across cities worldwide and how urban greening will change in the future remain unclear. Using satellite-based greenness and impervious surface datasets, we show that positive indirect impacts mitigated 56.85% of the negative direct impacts across 4,718 cities worldwide from 2000 to 2019. Notably, the offsetting coefficient is much greater in Global North cities (79.13%) than in Global South cities (38.01%) partly due to their socioeconomic differences. This disparity in urban greening dynamics will continue in the future. Approximately 60% of Global North cities and 30% of Global South cities will become greener by 2040. Our results reveal the divergent trade-offs between vegetation loss and enhanced vegetation growth in cities of different socioeconomic levels and stages of urbanization. In conclusion, such insights are crucial for a comprehensive understanding of urban greening dynamics and for devising strategies to attain sustainable development goals.

54 ENVIRONMENTAL SCIENCES↗