Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “carbonaceous materials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27
All sourcesNASA NTRSDOE OSTI
NASA NTRS2010

Trapping Planetary Noble Gases During the Fischer-Tropsch-Type Synthesis of Organic Materials

When hydrogen, nitrogen and CO arc exposed to amorphous iron silicate surfaces at temperatures between 500 - 900K, a carbonaceous coating forms via Fischer-Tropsch type reactions!, Under normal circumstances such a catalytic coating would impede or stop further reaction. However, we find that this coating is a better catalyst than the amorphous iron silicates that initiate these rcactions:u . The formation of a self-perpetuating catalytic coating on grain surfaces could explain the rich deposits of macromolecular carbon found in primitive meteorites and would imply that protostellar nebulae should be rich in organic materiaL Many more experiments are needed to understand this chemical system and its application to protostellar nebulae.

Nuth, Joseph A.↗
DOE OSTI2023

Interaction between clay minerals and organics in asteroid Ryugu

The Hayabusa 2 spacecraft brought back to Earth grains of the carbonaceous asteroid Ryugu. Such grains represent the pristine state of CI chondritic materials and have been preserved from exposure to Earth’s atmosphere. Here, we show evidence of the presence of organics trapped within the interlayer space of smectite layers in Ryugu grains. No such organics are found in the Orgueil CI meteorite. We put forward that the organics within the interlayer space of smectite in Orgueil CI meteorite were lost during their oxidation on Earth. Also, we propose that the presence of organics within the interlayers space of smectite might be responsible for the possible NH infrared signature observed in Ryugu particles and potentially to a few large C-type asteroids including Ceres

58 GEOSCIENCES↗
NASA NTRS1963

Water in Lunar Materials

Two lines of evidence, suggest independently that materials which formed the Moon were not anhydrous: 1. Meteorites, our only sample of extraterrestrial material, contain water in varying amounts. Chondrites average about 0.25% water by weight. Carbonaceous chondrites, however, contain up to 20% water; and, although much of this water may be adsorbed atmospheric and surface water, the abundance of silicate hydrates in these objects indicates that considerable water existed in these meteorites before Earth impact. 2. The gas emission from Alphonsus observed by Kosyrev indicates that volatiles are diffusing out of the Moon. The observed emission was a C, band. Analyses of presumably juvenile gases reaching the Earth's surface show that water generally composes 95% or more of the gas. By analogy, it is suggested that water must be reaching the lunar surface. Consequently, it is reasonable to conclude that water existed in the materials which formed the Moon as well as those which formed the Earth or meteorites (or their source object). An estimate of the water content of the primordial Earth is 0.03%.

Speed, R. C.↗
NASA NTRS2024

Hydrogen Isotopic Composition of Hydrous Minerals in Particles From Bennu

On September 24, 2023, NASA’s OSIRIS-REx mission delivered to Earth ~121 g of pristine carbonaceous regolith from asteroid Bennu. A first series of mineralogical observations and chemical/isotopic analyses of Bennu aggregate samples (fine to coarse particles up to a few mm) revealed that this material resembles the most chemically primitive chondrites and the samples returned by the JAXA’s Hayabusa2 mission from the carbonaceous asteroid Ryugu. Laboratory studies have confirmed the story gleaned from the spacecraft encounter that Bennu’s rock fragments underwent extensive aqueous alteration and are predominantly composed of hydrated minerals (serpentine, smectite) and other secondary minerals (e.g., magnetite, carbonates). The secondary phases were likely formed under the presence of liquid water on Bennu’s parent asteroid. The isotopic compositions of hydrous minerals and secondary phases can increase our understanding of the source and distribution of water and volatile elements in the protoplanetary disk [e.g., 5-8]. However, direct estimates of the hydrogen isotopic ratios (D/H) in hydrous minerals cannot be obtained easily in primitive rocks due to the difficulty in estimating the organic matter (OM) contribution to the whole H budget. In order to obtain hints on the initial constituents of Bennu’s parent asteroid and to test if Bennu's parent asteroid have formed beyond the snow line (hypothesis 4 of [9]), we measured the D/H and C/H ratios in chondritic matrices by secondary ion mass spectrometry (SIMS) and obtain information on the D/H ratio of water retained in the hydrated minerals. The method also gives clues on the hydrogen isotope variability among different Bennu rock fragments made available for measurement.

L Piani↗
NASA NTRS2015

Sims Analysis of Water Abundance and Hydrogen Isotope in Lunar Highland Plagioclase

The detection of indigenous water in mare basaltic glass beads has challenged the view established since the Apollo era of a "dry" Moon. Since this discovery, measurements of water in lunar apatite, olivine-hosted melt inclusions, agglutinates, and nominally anhydrous minerals have confirmed that lunar igneous materials contain water, implying that some parts of lunar mantle may have as much water as Earth's upper mantle. The interpretation of hydrogen (H) isotopes in lunar samples, however, is controversial. The large variation of H isotope ratios in lunar apatite (delta Deuterium = -202 to +1010 per mille) has been taken as evidence that water in the lunar interior comes from the lunar mantle, solar wind protons, and/or comets. The very low deuterium/H ratios in lunar agglutinates indicate that solar wind protons have contributed to their hydrogen content. Conversely, H isotopes in lunar volcanic glass beads and olivine-hosted melt inclusions being similar to those of common terrestrial igneous rocks, suggest a common origin for water in both Earth and Moon. Lunar water could be inherited from carbonaceous chondrites, consistent with the model of late accretion of chondrite-type materials to the Moon as proposed by. One complication about the sources of lunar water, is that geologic processes (e.g., late accretion and magmatic degassing) may have modified the H isotope signatures of lunar materials. Recent FTIR analyses have shown that plagioclases in lunar ferroan anorthosite contain approximately 6 ppm H2O. So far, ferroan anorthosite is the only available lithology that is believed to be a primary product of the lunar magma ocean (LMO). A possible consequence is that the LMO could have contained up to approximately 320 ppm H2O. Here we examine the possible sources of water in the LMO through measurements of water abundances and H isotopes in plagioclase of two ferroan anorthosites and one troctolite from lunar highlands.

Hui, Hejiu↗
NASA NTRS1979

Numerical simulation of experiments in the Giant Planet Facility

Utilizing a series of existing computer codes, ablation experiments in the Giant Planet Facility are numerically simulated. Of primary importance is the simulation of the low Mach number shock layer that envelops the test model. The RASLE shock-layer code, used in the Jupiter entry probe heat-shield design, is adapted to the experimental conditions. RASLE predictions for radiative and convective heat fluxes are in good agreement with calorimeter measurements. In simulating carbonaceous ablation experiments, the RASLE code is coupled directly with the CMA material response code. For the graphite models, predicted and measured recessions agree very well. Predicted recession for the carbon phenolic models is 50% higher than that measured. This is the first time codes used for the Jupiter probe design have been compared with experiments.

Green, M. J.↗
NASA NTRS1980

Infrared reflectance spectra of asteroids - A search for water of hydration

Infrared reflectance spectra have shown the presence of an absorption feature in the 3-4 micron region for seven C and U asteroids. By comparison with laboratory spectra of terrestrial silicates and meteorites, it is concluded that this band is probably due to water in the form of hydrated salts and silicates (clay minerals), implying that the surface material of these asteroids may be analogous to the CI and CM carbonaceous chondritic meteorites. The presence of other hydrated minerals, however, cannot be ruled out. The depths of the water bands in the spectra vary from asteroid to asteroid, though no asteroid spectrum shows a band as deep as was detected on 1 Ceres. On four other C asteroids, no water band was detected. The implications of these observations for the mineralogy of these asteroids are discussed

Lebofsky, L. A.↗
NASA NTRS1992

Interdisciplinary scientist participation in the Phobos mission

Data was acquired from VSK (2 wide-angle visible-NIR TV cameras at 0.4 to 0.6 micrometers and 0.8 to 1.1 micrometers, and a narrow-angle TV camera), KRFM (10-band UV-visible spectrometer at 0.3 to 0.6 micrometers and a 6-band radiometer at 5-50 micrometers), and ISM (a 128-channel NIR imaging spectrometer at 0.8 to 3 micrometers). These data provided improved mapping coverage of Phobos; improved mass, shape, and volume determinations, with the density shown to be lower than that of all known meteorites, suggesting a porous interior; evidence for a physically, spectrally and possibly compositionally heterogeneous surface; and proof that the spectral properties do not closely resemble those of unaltered carbonaceous chondrites, but show more resemblance to the spectra of altered mafic material. For Mars, the data show that the underlying rock type can be distinguished through the global dust cover; that the spectral properties and possibly composition vary laterally between and within the geologic provinces; that the surface physical properties vary laterally, and in many cases, the boundaries coincide with those of the geologic units; and the acquired data also demonstrate the value of reflectance spectroscopy and radiometry to the study of Martian geology.

Source record↗
NASA NTRS1994

What Can Interplanetary Dust Particles Tell Us About Interstellar Dust?

Dust is injected into the interplanetary medium by both comets and asteroids and there is reason to believe that particles from both of these types of sources are represented in the population of interplanetary dust collected in the stratosphere. The presence of isotopic anomalies and of adjacent mineral and carbonaceous phases that are chemically unequilibrated indicates that these particles contain primitive materials that have avoided many of the alteration processes that have affected most other extraterrestrial materials since their aggregation in the Solar nebula. This suggests that many of the subcomponents of the collected dust may have a chemical and isotopic 'memory' that extends back through the formation of the Solar System and therefore reflects the properties of interstellar dust populations. Indeed, it is possible that some of the subcomponents of the collected dust could have been true interstellar dust grains prior to the formation of the Solar nebula. The implications of this possibility will be discussed in light of our present knowledge of interplanetary dust.

Sandford, Scott A.↗
NASA NTRS2009

Identification of an Extremely 180-Rich Presolar Silicate Grain in Acfer 094

Presolar silicate grains have been abundantly identified since their first discovery less than a decade ago [1,2,3]. The O isotopic compositions of both silicate and oxide stardust indicate the vast majority (>90%) condensed around Orich asymptotic giant branch (AGB) stars. Though both presolar phases have average sizes of ~300 nm, grains larger than 1 m are extremely uncommon for presolar silicates. Thus, while numerous isotopic systems have been measured in presolar oxide grains [4], very few isotopic analyses for presolar silicates exist outside of O and Si [2,5]. And still, these measurements suffer from isotopic dilution with surrounding matrix material [6]. We conduct a search for presolar silicates in the primitive carbonaceous chondrite Acfer 094 and in some cases obtain high spatial resolution, high precision isotopic ratios.

Nguyen, A. N.↗
NASA NTRS2010

A Cabonaceous Chondrite Dominated Lithology from the HED Parent; PRA 04401

The paired howardite breccias Mt. Pratt (PRA) 04401 and PRA 04402 are notable for their high proportion of carbonaceous chondrite clasts [1]. They consist predominantly of coarse (0.1-7 mm) diogenite (orthopyroxene), eucrite (plagioclase + pyroxene), and carbonaceous chondrite clasts set in a finer grained matrix of these same materials. Coarse C-chondrite clasts up to 7 mm are composed mainly of fine-grained phyllosilicates with lesser sulfides and high-mg# anhydrous magnesian silicates. Most of these clasts appear to be texturally consistent with CM2 classification [1] and some contain relict chondrules. The clasts are angular and reaction or alteration textures are not apparent in the surrounding matrix. PRA 04401 contains about 70 modal% C-chondrite clasts while PRA 04402 contains about 7%. Although many howardites are known to contain abundant C-chondrite clasts [2,3,4], PRA 04401 is, to our knowledge, the most chondrite-rich howardite lithology identified to date. Low EPMA totals from CM2-type clasts in other howardites suggest that they frequently contain 10 wt% or more water [2], a figure consistent with their mineralogy. PRA 04401, therefore, demonstrates the potential for hydrous lithologies with greater than 5 wt% water to occur locally within the nominally anhydrous HED parent body. Since the origin of this water is xenogenic, it might therefore be concentrated in portions of the asteroid surface where it would be more readily observable by remote sensing techniques. We plan to further examine C-chondrite clasts in PRA 04401/2 with the intent of establishing firm chemical classification, estimating water content, and evaluating their relationship with the host breccia. To help place them in context of the HED parent, we will also compare these breccias with other howardites to evaluate which lithologies are likely to be more prevalent on the asteroid surface.

Herrin, Jason S.↗
DOE OSTI2024

Demystifying In Situ Pyrolysis Chemistry for High-Performance Polyanionic Cathodes in Sodium-Ion Batteries

In this article, the carbon coating strategy has emerged as an indispensable approach to improve the conductivity of polyanionic cathodes. However, owing to the complex reaction process between precursors of carbon and cathode, establishing a unified screening principle for carbonaceous precursors remains a technical challenge. Herein, we reveal that carbonaceous precursor pyrolysis chemistry undeniably influences the formation process and performance of Na 3 V 2 (PO 4 ) 3 (NVP) cathodes from in situ insights. By investigating three types of carbonaceous precursors, it is found that O/H-containing functional groups can provide more bonding sites for cathode precursors and generate a reducing atmosphere by pyrolysis, which is beneficial to the formation of polyanionic materials and a uniform carbon coating layer. Conversely, excessive pyrolysis of functional groups leads to a significant amount of gas, which is detrimental to the compactness of the carbon layer. Furthermore, the substantial presence of residual heteroatoms diminishes graphitization. In this case, it is demonstrated that carbon dots (CDs) precursors with suitable functional groups can comprehensively enhance the Na+ migration rate, reversibility, and interface stability of the cathode material. As a result, the NVP/CDs cathode displays outstanding capacity retention, maintaining 92% after 10,000 cycles at a high rate of 50 C. Altogether, these findings provide a valuable benchmark for carbon source selection for polyanionic cathodes.

25 ENERGY STORAGE↗
NASA NTRS1993

Hairy carbon electrodes studied by cyclic voltammetry and battery discharge testing

Hairy carbon is a new material developed by growing submicron carbon filaments on conventional carbon substrates. Typical substrate materials include carbon black, graphite powder, carbon fibers, and glassy carbon. A catalyst is used to initiate hair growth with carbonaceous gases serving as the carbon source. To study the electrochemical behavior of hairy carbons, cyclic voltammetry (CV) and discharge testing were conducted. In both cases, hairy carbon results surpassed those of the substrate material alone.

Chung, Deborah D. L.↗
DOE OSTI2021

Chromium Isotopic Evidence for Mixing of NC and CC Reservoirs in Polymict Ureilites: Implications for Dynamical Models of the Early Solar System

Nucleosynthetic isotope anomalies show that the first few million years of solar system history were characterized by two distinct cosmochemical reservoirs, CC (carbonaceous chondrites and related differentiated meteorites) and NC (the terrestrial planets and all other groups of chondrites and differentiated meteorites), widely interpreted to correspond to the outer and inner solar system, respectively. At some point, however, bulk CC and NC materials became mixed, and several dynamical models offer explanations for how and when this occurred. We use xenoliths of CC materials in polymict ureilite (NC) breccias to test the applicability of such models. Polymict ureilites represent regolith on ureilitic asteroids but contain carbonaceous chondrite-like xenoliths. We present the first 54 Cr isotope data for such clasts, which, combined with oxygen and hydrogen isotopes, show that they are unique CC materials that became mixed with NC materials in these breccias. It has been suggested that such xenoliths were implanted into ureilites by outer solar system bodies migrating into the inner solar system during the gaseous disk phase ~3–5 Myr after CAI, as in the "Grand Tack" model. However, combined textural, petrologic, and spectroscopic observations suggest that they were added to ureilitic regolith at ~50–60 Myr after CAI, along with ordinary, enstatite, and Rumuruti-type chondrites, as a result of the breakup of multiple parent bodies in the asteroid belt at this time. This is consistent with models for an early instability of the giant planets. The C-type asteroids from which the xenoliths were derived were already present in inner solar system orbits.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1993

Cathodoluminescence properties of components in enstatite chondrites

As a group, the enstatite chondrites are notable by the extremely low FeO content of most of their silicates. This property predisposes many of these materials to emit Cathodoluminescence (CL). Since examination of the CL properties of meteoritic components in ordinary and carbonaceous chondrites have proven to be a useful technique, we have initiated a survey of the enstatite chondrites in order to better characterize the chemical and physical properties of their luminescing phases. Because of the diversity encountered in this study, it is first necessary to describe the number and types of materials observed to emit CL in these meteorites. Two CL techniques were used. First, the initial survey work was conducted at low magnification using a Nuclide (now MAAS) Luminoscope mounted to a Wild MP binocular microscope equipped for photomicroscopy. The beam conditions used were 14 +/- KeV and 7 +/- 1 milliamps, with the beam focussed to the diameter of the field of view of the microscope at 20x (appox. 1.25 cm). Photomosaics were produced for each section using Ecktar 1000 film and an exposure time of 15 to 30 seconds. Second, high magnification (400x) photos were obtained of individual components of interest by mounting a 35mm camera to the optical system of the Cameca Camebax microprobe located at the Johnson Space Center. Beam conditions used were 15 KeV and 600 nA. Ecktar 1000 film was also used, but exposure times of 6 minutes were necessary to produce a useful image. The components in E chondrites that produce CL can be divided into four broad categories. These are clasts and aggregates, chondrules, matrix components, and refractory objects. Components in each category are discussed.

Dehart, John M.↗
NASA NTRS2011

Spitzer Evidence for a Late Heavy Bombardment and the Formation of Urelites in {eta}Corvi at Approximately 1 Gyr

We have analyzed Spitzer and NASA/IRTF 2 - 35 micrometer spectra of the warm, ~350 K circumstellar dust around the nearby MS star eta Corvi (F2V, 1.4 plus or minus 0.3 Gyr). The spectra show clear evidence for warm, water- and carbon-rich dust at ~3 AU from the central star, in the system's Terrestrial Habitability Zone. Spectral features due to ultra-primitive cometary material were found, in addition to features due to impact produced silica and high temperature carbonaceous phases. At least 9 x 10(exp 18) kg of 0.1 - 100 micrometer warm dust is present in a collisional equilibrium distribution with dn/da ~ a(exp -3.5), the equivalent of a 130 km radius KBO of 1.0 grams per cubic centimeter density and similar to recent estimates of the mass delivered to the Earth at 0.6 - 0.8 Gyr during the Late Heavy Bombardment. We conclude that the parent body was a Kuiper-Belt body or bodies which captured a large amount of early primitive material in the first Myrs of the system's lifetime and preserved it in deep freeze at approximately 150 AU. At approximately 1.4 Gyr they were prompted by dynamical stirring of their parent Kuiper Belt into spiraling into the inner system, eventually colliding at 5-10 kilometers per second with a rocky planetary body of mass less than or equal to M(sub Earth at approximately 3 AU, delivering large amounts of water (greater than 0.1 % of M(sub Earth's Oceans)) and carbon-rich material. The Spitzer spectrum also closely matches spectra reported for the Ureilite meteorites of the Sudan Almahata Sitta fall in 2008, suggesting that one of the Ureilite parent bodies was a KBO.

Lisse, C. M.↗
NASA NTRS1994

Chondrule remelting: Evidence from coarse-grained chondrule rims and compound chondrules

The meteorites that best preserve the nebular record are the type 3 ordinary (OC) and carbonaceous chondrites; their major components include chondrules and chondrule fragments, refractory and mafic inclusions, FeO-rich silicate matrix material. Many chondrules are surrounded by nms; these can be divided into two major types: (1) fine-grained rims, which are composed of matrix material; and (2) igneous or coarse-grained rims, which have igneous textures and larger, less-ferroan mafic silicate grains. Fine-grained rims surround most of the chondrules in the least-equilibrated type 3 ordinary and carbonaceous chondrites. They were most likely derived via collapse of clumps of nebular dust that accreted around coarse objects such as chondrules and inclusions. Coarse-grined or igneous rims surround approximately 10% of the chondrules in type 3 OC and approximately 50% of the chondrules in CV3 chondrites as well as some chondrule fragments and isolated mineral grains. They probably formed by partly melting finer-grained dust-rich precursors and admixed chondrule fragments.

Rubin, A. E.↗
NASA NTRS1974

Melting relations of the Allende meteorite

The proportions of major oxides in the Allende carbonaceous chondrite after partial reduction are remarkably similar to those in possible mantle material of the earth. When heated, the Allende meteorite generates a sulfide melt, a ferrobasaltic melt, and olivine with or without pyroxene, over a wide pressure range (5 to 25 kilobar). The silicate melt contains more sodium and less titanium than lunar ferrobasalts. An aggregate of the Allende chondrite rich in calcium and aluminum produces silica-undersaturated, calcium-rich melt and spinel over a wide pressure and temperature range. It is suggested that the earth's core contains significant amounts of both nickel and sulfur and that a 3:2 mixture of Allende bulk sample and calcium- and aluminum-rich agregates is closer in major element abundances than either of these components to the average composition of the moon.

Seitz, M. G.↗