Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “atomic structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Surface and electronic structure at atomic length scales of the nonsymmorphic antiferromagnet Eu 5 In 2 Sb 6

We performed scanning tunneling microscopy and spectroscopy (STM/STS) measurements to investigate the Zintl phase Eu 5 ⁢In 2 ⁢Sb 6 , a nonsymmorphic antiferromagnet. The theoretical prediction of a nontrivial Fermi surface topology stabilized by the nonsymmorphic symmetry motivated our research. On the cleaved (010) plane, we obtained striped patterns that can be correlated to the stacking of the [In 2 ⁢Sb 6 ] 10- double chains along the crystallographic c axis. The attempted cleavage along the a axis revealed a more complex pattern. We combined the STS measurement on nonreconstructed (010) and (081) surfaces with DFT calculations to further elucidate the electronic structure of Eu 5 ⁢In 2 ⁢Sb 6 . From our investigations so far, direct experimental evidence of the predicted topological surface states remains elusive.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Model-free reconstruction of magnetic correlations in frustrated magnets

Frustrated magnetic systems exhibit extraordinary physical properties, but quantification of their magnetic correlations poses a serious challenge to experiment and theory. Current insight into frustrated magnetic correlations relies on modelling techniques such as reverse Monte-Carlo methods, which require knowledge about the exact ordered atomic structure. Here, we present a method for direct reconstruction of magnetic correlations in frustrated magnets by three-dimensional difference pair distribution function analysis of neutron total scattering data. The methodology is applied to the disordered frustrated magnet bixbyite, (Mn 1– x Fe x ) 2 O 3 , which reveals nearest-neighbor antiferromagnetic correlations for the metal sites up to a range of approximately 15 Å. Pertinently, this technique allows for magnetic correlations to be determined directly from the experimental data without any assumption about the atomic structure.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Radiative properties of quantum emitters in boron nitride from excited state calculations and Bayesian analysis

Abstract Point defects in hexagonal boron nitride (hBN) have attracted growing attention as bright single-photon emitters. However, understanding of their atomic structure and radiative properties remains incomplete. Here we study the excited states and radiative lifetimes of over 20 native defects and carbon or oxygen impurities in hBN using ab initio density functional theory and GW plus Bethe-Salpeter equation calculations, generating a large data set of their emission energy, polarization and lifetime. We find a wide variability across quantum emitters, with exciton energies ranging from 0.3 to 4 eV and radiative lifetimes from ns to ms for different defect structures. Through a Bayesian statistical analysis, we identify various high-likelihood charge-neutral defect emitters, among which the native V N N B defect is predicted to possess emission energy and radiative lifetime in agreement with experiments. Our work advances the microscopic understanding of hBN single-photon emitters and introduces a computational framework to characterize and identify quantum emitters in 2D materials.

Chemistry↗
DOE OSTI2015

Beyond crystallography: Diffractive imaging using coherent x-ray light sources

X-ray crystallography has been central to the development of many fields of science over the past century. It has now matured to a point that as long as good-quality crystals are available, their atomic structure can be routinely determined in three dimensions. However, many samples in physics, chemistry, materials science, nanoscience, geology, and biology are noncrystalline, and thus their three-dimensional structures are not accessible by traditional x-ray crystallography. Overcoming this hurdle has required the development of new coherent imaging methods to harness new coherent x-ray light sources. Here we review the revolutionary advances that are transforming x-ray sources and imaging in the 21st century.

Miao, Jianwei↗
DOE OSTI2015

Critical thickness of atomically ordered III-V alloys

The critical thickness model is modified with a general boundary energy that describes the change in bulk energy as a dislocation regularly alters the atomic structure of an ordered material. The model is evaluated for dislocations gliding through CuPt-ordered GaInP and GaInAs, where the boundary energy is negative and the boundary is stable. With ordering present, the critical thickness is significantly lowered and remains finite as the mismatch strain approaches zero. The reduction in critical thickness is most significant when the order parameter is greatest and the amount of misfit energy is low. The modified model is experimentally validated for low-misfit GaInP epilayers with varying order parameters using in situ wafer curvature and ex situ cathodoluminescence. With strong ordering, relaxation begins at a lower thickness and occurs at a greater rate, which is consistent with a lower critical thickness and increased glide force. Thus, atomic ordering is an important consideration for the stability of lattice-mismatched devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

The N‐terminal intrinsically disordered region of Ncb5or docks with the cytochrome b 5 core to form a helical motif that is of ancient origin

Abstract NADH cytochromeb 5 oxidoreductase (Ncb5or) is a cytosolic ferric reductase implicated in diabetes and neurological conditions. Ncb5or comprises cytochromeb 5 (b 5 ) and cytochromeb 5 reductase (b 5 R) domains separated by a CHORD‐Sgt1 (CS) linker domain. Ncb5or redox activity depends on proper inter‐domain interactions to mediate electron transfer from NADH or NADPH via FAD to heme. While full‐length human Ncb5or has proven resistant to crystallization, we have succeeded in obtaining high‐resolution atomic structures of theb 5 domain and a construct containing the CS andb 5 R domains (CS/b 5 R). Ncb5or also contains an N‐terminal intrinsically disordered region of 50 residues that has no homologs in other protein families in animals but features a distinctive, conserved L 34 MDWIRL 40 motif also present in reduced lateral root formation (RLF) protein in rice and increased recombination center 21 in baker's yeast, all attaching to ab 5 domain. After unsuccessful attempts at crystallizing a human Ncb5or construct comprising the N‐terminal region naturally fused to theb 5 domain, we were able to obtain a high‐resolution atomic structure of a recombinant rice RLF construct corresponding to residues 25–129 of human Ncb5or (52% sequence identity; 74% similarity). The structure reveals Trp 120 (corresponding to invariant Trp 37 in Ncb5or) to be part of an 11‐residue α‐helix (S 116 QMDWLKLTRT 126 ) packing against two of the four helices in theb 5 domain that surround heme (α2 and α5). The Trp 120 side chain forms a network of interactions with the side chains of four highly conserved residues corresponding to Tyr 85 and Tyr 88 (α2), Cys 124 (α5), and Leu 47 in Ncb5or. Circular dichroism measurements of human Ncb5or fragments further support a key role of Trp 37 in nucleating the formation of the N‐terminal helix, whose location in the N/b 5 module suggests a role in regulating the function of this multi‐domain redox enzyme. This study revealed for the first time an ancient origin of a helical motif in the N/b 5 module as reflected by its existence in a class of cytochromeb 5 proteins from three kingdoms among eukaryotes.

Biochemistry & Molecular Biology↗
DOE OSTI2019

Interactions between displacement cascade and dislocation and their influences on Peierls stress in Fe-20Cr-25Ni alloys

The interactions between dislocations and displacement cascades are investigated using molecular dynamics simulations. The primary knock-on atoms (PKAs) are placed at different distances to edge and screw dislocation lines. Specifically, an fcc Fe-20Cr-25Ni system is studied; the alloy is the based alloy for Alloy 709. The number of defects is calculated using Wigner-Seitz analysis in order to illustrate the effect of dislocations on cascades. The displacement cascades in systems containing dislocations tend to generate more total defects compared with bulk systems, but eventually lead to less surviving defects in the materials matrix due to interactions with dislocations. The changes in atomic structures of the dislocations after interacting with cascades are analyzed to understand how the primary damage affects dislocations. The displacement cascade potentially causes dislocation climb in edge dislocations and cross-slip in screw dislocations, which could serve as additional mechanisms contributing to the radiation-induced hardening (RIH) compared with conventional RIH models. To reveal this, Peierls stresses are calculated before and after cascades using molecular static simulations. This study provides critical information of how defect production and dislocations are correlated, especially when total dose is high, which needs to be taken into account in upper scale models, such as mean-field rate theory.

Lu, Zizhe↗
DOE OSTI2017

Surface Proton Transfer Promotes Four-Electron Oxygen Reduction on Gold Nanocrystal Surfaces in Alkaline Solution

Four-electron oxygen reduction reaction (4e-ORR), as a key pathway in energy conversion, is preferred over the two-electron reduction pathway that falls short in dissociating dioxygen molecules. Gold (Au) surfaces exhibit high sensitivity of the ORR pathway to its atomic structures. The long-standing puzzle remains unsolved why the Au surfaces with {100} sub-facets were exceptionally capable to catalyze the 4e-ORR in alkaline solution, though limited within a narrow potential window. Herein we report the discovery of a dominant 4e-ORR over the whole potential range on {310} surface of Au nanocrystal shaped as truncated ditetragonal prism (TDP). In contrast, ORR pathways on single-crystalline facets of shaped nanoparticles, including {111} on nano-octahedra and {100} on nano-cubes, are similar to their single-crystal counterparts. Combining our experimental results with density functional theory calculations, we elucidate the key role of surface proton transfers from co-adsorbed H 2 O molecules in activating the facet- and potential-dependent 4e ORR on Au in alkaline solutions. These results elucidate how surface atomic structures determine the reaction pathways via bond scission and formation among weakly adsorbed water and reaction intermediates. The new insight helps in developing facet-specific nanocatalysts for various reactions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2025

CuXASNet: Rapid and accurate prediction of copper L-edge x-ray absorption spectra using machine learning

In this work, we have developed CuXASNet, a dense neural network that predicts simulated Cu -edge x-ray absorption spectra (XAS) from atomic structures. Featurization of the Cu local environment is performed using a component of M3GNet, a graph neural network developed for predicting the potential energy surface. CuXASNet is trained on simulated spectra from FEFF9 at the multiple scattering level of theory, and can predict the and edges for Cu sites to quantitative accuracy. To validate our approach, we compare 14 experimental spectra extracted from the literature with the predictions of CuXASNet. The agreement of CuXASNet with experiments is shown by an average mean absolute error of 0.125 and an average Spearman's correlation coefficient of 0.891, which is comparable to FEFF9's values of 0.131 and 0.898 for the same metrics. As such, CuXASNet can rapidly predict a large number of -edge XAS spectra at the same accuracy as FEFF9 simulations. This can be used as a drop-in replacement for multiple scattering codes for fast screening of candidate atomic structure models of a measured system. This model establishes a general framework for Cu XAS prediction, and can be extended to more computationally expensive levels of theory and to other transition metal edges.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Temperature-induced structural evolution in liquid Ag-Ga alloys

Temperature-dependent atomic structural evolutions of liquid Ag 60 Ga 40 and Ag 70 Ga 30 alloys have been studied by in situ high-energy x-ray-diffraction (HEXRD) experiments combined with ab initio molecular-dynamics simulations. The experimental data show a reversible structural crossover at about 1050 ~ 1100 (± 50) K in both liquid Ag 60 Ga 40 and Ag 70 Ga 30 alloys. Obvious changes of the electrical resistivity, absolute thermoelectric power, and atomic diffusivity around the similar temperature range for both Ag-Ga liquids strongly support the HEXRD results. The origin of the liquid-to-liquid crossover in both Ag-Ga liquids was suggested to link with the rearrangements of Ag and Ga atoms, i.e., Ag and Ga atoms prefer to associate with themselves in the higher temperature range above 1100 K, consistent with the accelerated increase of the strong covalently bonded Ga–Ga dimers in both Ag-Ga liquids. In addition, more studies from the energy aspect are still desirable to understand the rearrangements of Ag and Ga atoms in the higher temperature range in both Ag-Ga liquids.

36 MATERIALS SCIENCE↗
NASA NTRS2015

Effects of Atomic-Scale Structure on the Fracture Properties of Amorphous Carbon - Carbon Nanotube Composites

The fracture of carbon materials is a complex process, the understanding of which is critical to the development of next generation high performance materials. While quantum mechanical (QM) calculations are the most accurate way to model fracture, the fracture behavior of many carbon-based composite engineering materials, such as carbon nanotube (CNT) composites, is a multi-scale process that occurs on time and length scales beyond the practical limitations of QM methods. The Reax Force Field (ReaxFF) is capable of predicting mechanical properties involving strong deformation, bond breaking and bond formation in the classical molecular dynamics framework. This has been achieved by adding to the potential energy function a bond-order term that varies continuously with distance. The use of an empirical bond order potential, such as ReaxFF, enables the simulation of failure in molecular systems that are several orders of magnitude larger than would be possible in QM techniques. In this work, the fracture behavior of an amorphous carbon (AC) matrix reinforced with CNTs was modeled using molecular dynamics with the ReaxFF reactive forcefield. Care was taken to select the appropriate simulation parameters, which can be different from those required when using traditional fixed-bond force fields. The effect of CNT arrangement was investigated with three systems: a single-wall nanotube (SWNT) array, a multi-wall nanotube (MWNT) array, and a SWNT bundle system. For each arrangement, covalent bonds are added between the CNTs and AC, with crosslink fractions ranging from 0-25% of the interfacial CNT atoms. The SWNT and MWNT array systems represent ideal cases with evenly spaced CNTs; the SWNT bundle system represents a more realistic case because, in practice, van der Waals interactions lead to the agglomeration of CNTs into bundles. The simulation results will serve as guidance in setting experimental processing conditions to optimize the mechanical properties of CNT composites.

Jensen, Benjamin D.↗
DOE OSTI2015

Stabilization of Pt monolayer catalysts under harsh conditions of fuel cells

We employed density functional theory to explore the stability of core (M = Cu, Ru, Rh, Pd, Ag, Os, Ir, Au)-shell (Pt) catalysts under harsh conditions, including solutions and reaction intermediates involved in the oxygen reduction reaction (ORR) in fuel cells. A pseudomorphic surface alloy (PSA) with a Pt monolayer (Pt{sub 1ML}) supported on an M surface, Pt{sub 1ML}/M(111) or (001), was considered as a model system. Different sets of candidate M cores were identified to achieve a stable Pt{sub 1ML} shell depending on the conditions. In vacuum conditions, the Pt{sub 1ML} shell can be stabilized on the most of M cores except Cu, Ag, and Au. The situation varies under various electrochemical conditions. Depending on the solutions and the operating reaction pathways of the ORR, different M should be considered. Pd and Ir are the only core metals studied, being able to keep the Pt{sub ML} shell intact in perchloric acid, sulfuric acid, phosphoric acid, and alkaline solutions as well as under the ORR conditions via different pathways. Ru and Os cores should also be paid attention, which only fall during the ORR via the *OOH intermediate. Rh core works well as long as the ORR does not undergo the pathway via *O intermediate. Our results show that PSAs can behave differently from the near surface alloy, Pt{sub 1ML}/M{sub 1ML}/Pt(111), highlighting the importance of considering both chemical environments and the atomic structures in rational design of highly stable core-shell nanocatalysts. Finally, the roles that d-band center of a core M played in determining the stability of supported Pt{sub 1ML} shell were also discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Three-dimensional atomic packing in amorphous solids with liquid-like structure

Liquids and solids are two fundamental states of matter. However, our understanding of their three-dimensional atomic structure is mostly based on physical models. Here we use atomic electron tomography to experimentally determine the three-dimensional atomic positions of monatomic amorphous solids, namely a Ta thin film and two Pd nanoparticles. We observe that pentagonal bipyramids are the most abundant atomic motifs in these amorphous materials. Instead of forming icosahedra, the majority of pentagonal bipyramids arrange into pentagonal bipyramid networks with medium-range order. Molecular dynamics simulations further reveal that pentagonal bipyramid networks are prevalent in monatomic metallic liquids, which rapidly grow in size and form more icosahedra during the quench from the liquid to the glass state. Furthermore, these results expand our understanding of the atomic structures of amorphous solids and will encourage future studies on amorphous–crystalline phase and glass transitions in non-crystalline materials with three-dimensional atomic resolution.

36 MATERIALS SCIENCE↗
DOE OSTI2022

A general synthesis of single atom catalysts with controllable atomic and mesoporous structures

The control of single metal atomic sites has been extensively studied in the field of single atom catalysts. By contrast, the precise control of the mesoporous structure in the matrix material, which directly correlates with mass diffusions and may play a dominant role in delivering industrially relevant reaction rates, has been overlooked. In this work, we report a general method for the synthesis of a single atom catalyst with control of the atomic structure of the single atomic site as well as the mesoporous structure of the carbon support for optimized catalytic performance. Various combinations of metal centres (Ni, Co, Mn, Zn, Cu, Sc and Fe) and mass diffusion channels in two dimensions and three dimensions were achieved. Using CO 2 reduction to CO as an example, our Ni single atom catalyst with three-dimensional diffusion channels delivered a practical current of 350 mA cm –2 while maintaining a 93% CO Faradaic efficiency, representing a sixfold improvement in turnover frequency compared to two-dimensional counterparts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Unravelling Disorder in Aperiodic Crystals – Diffuse Scattering and Atomic Resolution Holography

The atomic–scale disorder of aperiodic crystals, and quasicrystals in particular, is inherently difficult to explore by experimental methods due to their complex atomic arrangements. Two advanced characterization techniques, a revived and an emerging one, offer direct experimental access even to such complex atomic structures: Diffuse Scattering and Atomic Resolution Holography. Finally, in this overview, we introduce their specific application to aperiodic crystals and discuss their merits and difficulties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Energy levels and radiative rates for transitions in Cr-like Co IV and Ni V

We report calculations of energy levels and radiative rates (A-values) for transitions in Cr-like Co IV and Ni V. The quasi-relativistic Hartree–Fock (QRHF) code is adopted for calculating the data although grasp (general-purpose relativistic atomic structure package) and flexible atomic code (fac) have also been employed for comparison purposes. No radiative rates are available in the literature to compare with our results, but our calculated energies are in close agreement with those compiled by NIST for a majority of the levels. However, there are discrepancies for a few levels of up to 3%. The A-values are listed for all significantly contributing E1, E2 and M1 transitions, and the corresponding lifetimes reported, although unfortunately no previous theoretical or experimental results exist to compare with our data.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2014

Atomic resolution structure of the E. coli YajR transporter YAM domain

Highlights: • We report the crystal structure of the YAM domain of YajR transporter at 1.07 Å. • The YAM dimerization is related to the halogen-dependent high thermal stability. • A belt of poly-pentagonal water molecules was observed in the dimer interface. - Abstract: YajR is an Escherichia coli transporter that belongs to the major facilitator superfamily. Unlike most MFS transporters, YajR contains a carboxyl terminal, cytosolic domain of 67 amino acid residues termed YAM domain. Although it is speculated that the function of this small soluble domain is to regulate the conformational change of the 12-helix transmembrane domain, its precise regulatory role remains unclear. Here, we report the crystal structure of the YAM domain at 1.07-Å resolution, along with its structure determined using nuclear magnetic resonance. Detailed analysis of the high resolution structure revealed a symmetrical dimer in which a belt of well-ordered poly-pentagonal water molecules is embedded. A mutagenesis experiment and a thermal stability assay were used to analyze the putative role of this dimerization in response to changes in halogen concentration.

60 APPLIED LIFE SCIENCES↗