Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “actinides”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Minor Actinide Recycle in Sodium Cooled Fast Reactors Using Heterogeneous Targets

This paper investigates the plausible design of transmutation target assemblies for minor actinides (MA) in Sodium Fast Reactors (SFR). A heterogeneous recycling strategy is investigated, whereby after each reactor pass, un-burned MAs from the targets are blended with MAs produced by the driver fuel and additional MAs from Spent Nuclear Fuel (SNF). A design iteration methodology was adopted for customizing the core design, target assembly design and matrix composition design. The overall design was constrained against allowable peak or maximum in-core performances. While respecting these criteria, the overall design was adjusted to reduce the total number of assemblies fabricated per refueling cycle. It was found that an inert metal-hydride MA-Zr-Hx target matrix gave the highest transmutation efficiency, thus allowing for the least number of targets to be fabricated per reactor cycle.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Minor Actinides Loading Optimization for Proliferation Resistant Fuel Design - BWR

One approach to address the United States Nuclear Power (NP) 2010 program for the advanced light water reactor (LWR) (Gen-III+) intermediate-term spent fuel disposal need is to reduce spent fuel storage volume while enhancing proliferation resistance. One proposed solution includes increasing burnup of the discharged spent fuel and mixing minor actinide (MA) transuranic nuclides ( 237 Np and 241 Am) in the high burnup fuel. Thus, we can reduce the spent fuel volume while increasing the proliferation resistance by increasing the isotopic ratio of 238 Pu/Pu. For future advanced nuclear systems, MAs are viewed more as a resource to be recycled and transmuted to less hazardous and possibly more useful forms, rather than simply disposed of as a waste stream in an expensive repository facility. MAs play a much larger part in the design of advanced systems and fuel cycles, not only as additional sources of useful energy, but also as direct contributors to the reactivity control of the systems into which they are incorporated. A typical boiling water reactor (BWR) fuel unit lattice cell model with UO 2 fuel pins will be used to investigate the effectiveness of adding MAs ( 237 Np and/or 241 Am) to enhance proliferation resistance and improve fuel cycle performance for the intermediate-term goal of future nuclear energy systems. However, adding MAs will increase plutonium production in the discharged spent fuel. In this work, the Monte-Carlo coupling with ORIGEN-2.2 (MCWO) method was used to optimize the MA loading in the UO 2 fuel such that the discharged spent fuel demonstrates enhanced proliferation resistance, while minimizing plutonium production. The axial averaged MA transmutation characteristics at different burnup were compared and their impact on neutronics criticality and the ratio of 238 Pu/Pu discussed.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

AN INTEGRAL REACTOR PHYSICS EXPERIMENT TO INFER ACTINIDE CAPTURE CROSS-SECTIONS FROM THORIUM TO CALIFORNIUM WITH ACCELERATOR MASS SPECTROMETRY

The principle of the proposed experiment is to irradiate very pure actinide samples in the Advanced Test Reactor (ATR) at INL and, after a given time, determine the amount of the different transmutation products. The determination of the nuclide densities before and after neutron irradiation will allow inference of effective neutron capture cross-sections. This approach has been used in the past and the novelty of this experiment is that the atom densities of the different transmutation products will be determined using the Accelerator Mass Spectroscopy (AMS) technique at the ATLAS facility located at ANL. It is currently planned to irradiate the following isotopes: 232Th, 235U, 236U, 238U, 237Np, 238Pu, 239Pu, 240Pu, 241Pu, 242Pu, 241Am, 243Am and 248Cm.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Pilot-Scale TRUEX Flowsheet Testing for Separation of Actinides and Lanthanides from Used Nuclear Fuel

Advanced aqueous separation processes are being developed for the recycling of used nuclear fuel as part of the U.S. Department of Energy Nuclear Energy Advanced Fuel Cycle Initiative. The Transuranic Extraction (TRUEX) Process is being developed as part of these advanced separations processes for the separation of actinides and lanthanides from the used nuclear fuel. Testing of a TRUEX flowsheet has been performed using a thirty stage, 5-cm centrifugal contactor pilot plant. This testing was performed using a non-radioactive feed surrogate and data were collected and analyzed to evaluate removal efficiencies of the lanthanides, mass transfer efficiency of the lanthanides in the extraction and strip sections of the flowsheet, and the temperature profile of the process solutions throughout the centrifugal contactor pilot plant. Results indicate >99.9% separation for all lanthanides and mass transfer efficiencies typically ranging from 85% to 100%. Solution temperatures for each contactor stage, as well as general process performance, are also described.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Spectroscopic and Computational Characterization of Diethylenetriaminepentaacetic Acid/Transplutonium Chelates: Evidencing Heterogeneity in the Heavy Actinide(III) Series

The chemistry of trivalent transplutonium ions (Am 3+ , Cm 3+ , Bk 3+ , Cf 3+ , Es 3+ …) is usually perceived as monotonic and paralleling that of the trivalent lanthanide series. We present the first extended X-ray absorption fine structure (EXAFS) study performed on a series of aqueous heavy actinide chelates, extending past Cm. The results obtained on diethylenetriaminepentaacetic acid (DTPA) complexes of trivalent Am, Cm, Bk, and Cf show a break to much shorter metal–oxygen nearest-neighbor bond lengths in the case of Cf 3+ . Corroborating those results, density functional theory calculations, extended to Es 3+ , suggest that the shorter Cf-O and Es-O bonds could arise from the departure of the coordinated water molecule and contraction of the ligand around the metal relative to the other [M III DTPA(H 2 O)] 2- (M=Am, Cm, Bk) complexes. Taken together, these experimental and theoretical results demonstrate inhomogeneity within the trivalent transplutonium series that has been insinuated and debated in recent years, and that may also be leveraged for future nuclear waste reprocessing technologies.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

ThH 5 : An Actinide–Containing Superhalogen Molecule

Thorium and its compounds have been widely investigated as important nuclear materials. Previous research focused on the potential use of thorium hydrides, such as ThH 2 , ThH 4 , and Th 4 H 15 , as nuclear fuels. Here, we report studies of the anion, ThH 5 , by anion photoelectron spectroscopy and computations. The resulting experimental and theoretical vertical detachment energies (VDE) for ThH 5 are 4.09 eV and 4.11 eV, respectively. These values and the agreement between theory and experiment facilitated the characterization of the structure of the ThH 5 anion and showed its neutral counterpart, ThH 5 to be a superhalogen. ThH 5 , which exhibits a C 4v structure with five Th–H single bonds, possesses the largest known H/M ratio among the actinide elements, M. Here, the adaptive natural density partitioning (AdNDP) method was used to further analyze the chemical bonding of ThH 5 – and to confirm the existence of five Th–H single bonds in the ThH 5 – molecular anion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Determination of actinide and fission-product isotopes in very-high-burnup spent nuclear fuel.

A work plan was desired that would produce data for a wide array of actinide and fission-product isotopes with reasonably good accuracy and relatively low cost. An analysis scheme involving a fairly small number of separations, dilutions, and measurement methods was used to generate information on 74 isotopes in two spent-fuel samples of >70 GWd/MTU burnup. Some of the measured isotopes are of high interest for burnup-credit evaluations and had not been reported previously for high-burnup fuels.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Development of a standardized sequential extraction protocol for simultaneous extraction of multiple actinide elements

Sequential extraction is a useful technique for assessing the potential to leach actinides from soils; however, current literature lacks uniformity in experimental details, making direct comparison of results impossible. This work continued development toward a standardized five-step sequential extraction protocol by analyzing extraction behaviors of 232 Th, 238 U, 239,240 Pu and 241 Am from lake and ocean sediment reference materials. Results produced a standardized procedure after creating more defined reaction conditions to improve method repeatability. A NaOH fusion procedure is recommended following sequential leaching for the complete dissolution of insoluble species.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Measurements of effective actinides neutron capture cross sections in a cadmium-filtered epithermal neutron spectrum

In this work, a total of 20 actinide samples were irradiated in the Advanced Test Reactor (ATR) at Idaho National Laboratory (INL): 233 U (1), 235 U (1), 236 U (1), 238 U (1), 237 Np (2), 239 Pu (1), 240 Pu (1), 242 Pu (2), 244 Pu (2), 241 Am (2), 243 Am (2), 244 Cm (2), and 248 Cm (2). The samples were loaded in a basket containing a 1.1-mm thick cadmium filter. The presence of the filter drastically changes the neutron spectrum in the samples and accentuates the reaction rates in the resonance region. Isotopic ratios were determined using Multi-Collector Inductively Coupled Plasma Mass Spectrometry (MC-ICP-MS) that allowed inferring effective capture cross sections. Detailed best-estimate MCNP models of the experiment using ENDF/B-VII.0 nuclear data were developed to calculate the effective neutron cross sections and, subsequently, compare them with the cross sections inferred from experimental results.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

On the valence fluctuation in the early actinide metals

In this study, recent X-ray measurements suggest a degree of valence fluctuation in plutonium and uranium intermetallics. We are applying a novel scheme, in conjunction with density functional theory, to predict 5f configuration fractions of states with valence fluctuations for the early actinide metals. For this purpose we perform constrained integer f-occupation calculations for the α phases of uranium, neptunium, and plutonium metals. For plutonium we also investigate the δ phase. The model predicts uranium and neptunium to be dominated by the f 3 and f 4 configurations, respectively, with only minor contributions from other configurations. For plutonium (both α and δ phase) the scenario is dramatically different. Here, the calculations predict a relatively even distribution between three valence configurations. The δ phase has a greater configuration fraction of f 6 compared to that of the α phase. The theory is consistent with the interpretations of modern X-ray experiments and we present resonant X-ray emission spectroscopy results for α-uranium.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Isotope ratio analysis of actinides, fission products, and geolocators by high-efficiency multi-collector thermal ionization mass spectrometry

A ThermoFisher 'Triton' multi-collector thermal ionization mass spectrometer (MC-TIMS) was evaluated for trace and ultra-trace level isotoperatioanalysis of actinides (uranium, plutonium, and americium), fission products and geolocators (strontium, cesium, and neodymium). Total efficiencies (atoms loaded to ions detected) of up to 0.5-2% for U, Pu, and Am, and 1-30% for Sr, Cs, and Nd can be reported employing resin bead load techniques onto flat ribbon Re filaments or resin beads loaded into a millimeter-sized cavity drilled into a Re rod. This results in detection limits of <0.1 fg (10{sup 4} atoms to 10{sup 5} atoms) for {sup 239-242+244}Pu, {sup 233+236}U, {sup 241-243}Am, {sup 89,90}Sr, and {sup 134,135,137}Cs, and {le} 1 pg for natural Nd isotopes (limited by the chemical processing blank) using a secondary electron multiplier (SEM) or multiple-ion counters (MICs). Relative standard deviations (RSD) as small as 0.1% and abundance sensitivities of 1 x 10{sup 6} or better using a SEM are reported here. Precisions of RSD {approx} 0.01-0.001% using a multi-collector Faraday cup array can be achieved at sub-nanogram concentrations for strontium and neodymium and are suitable to gain crucial geolocation information. The analytical protocols reported herein are of particular value for nuclear forensic and nuclear safeguard applications.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

Transmission Electron Microscopy Characterization of Fuel Cladding Chemical Interaction between Minor Actinides bearing U-Pu-Zr Fuel and AIM1 Cladding

Minor actinides (MA) significantly contribute to the long-term radiotoxicity of spent nuclear fuel (SNF). Separating MA from SNF and incorporating it into metallic fuels for fast reactor transmutation is a potential method to reduce this radiotoxicity. Here, this study focuses on transmission electron microscopy characterization of two samples from the fuel cladding chemical interaction (FCCI) region of an americium (Am) and neptunium (Np)-bearing (MA-bearing) uranium-plutonium-zirconium (U-Pu-Zr) fuel irradiated in the Phenix fast reactor to 9.5 % FIMA burnup at approximately 550 °C cladding temperature. The results show that despite the complex chemical interactions between MA and AIM1 cladding elements, excessive FCCI was not induced, and Am penetration depth in the cladding limited to less than 4 µm. Np remained mostly inside fuel. The Zr-rich compounds layer effectively limited the accumulation of lanthanide on the inner cladding surface. Overall, the FCCI behavior between investigated MA-bearing U-Pu-Zr fuel and AIM1 cladding is benign.

Chemical interaction↗

Elucidating the effect of minor-actinide addition on fuel-cladding chemical interaction in an HT-9 clad U-Pu-Zr metallic fuel irradiated to 6.15 at.% burnup in EBR-II

Scanning and transmission electron microscopy (S/TEM) were used to characterize the local fuel-cladding chemical interaction (FCCI) in one cross-section taken from a HT-9 clad U-20.3Pu-10Zr-1.2Am-1.3Np (in wt.%) fuel irradiated to 6.15 at.% burnup with inner cladding temperatures ranging between 460–490 °C. Results showed that the total interaction thickness between fuel and cladding was <10 µm. Fe infiltrated the fuel to form U-Zr-Fe phases while fuel elements or lanthanides did not infiltrate into the cladding. Np was not involved in the formation of any phases in the examined locations; however, Am played a role by forming a ∼2 µm thick homogeneous Fe-Pu-Am planar front at the inner cladding wall. An oxidized Na layer existed in the fuel-cladding gap with Fe and lanthanide particles dispersed within, suggesting Na could facilitate the transport of fuel and cladding constituents. Secondary phases, including an FCC Zr-rich phase, lanthanide phases, and α’-Cr(Fe) were identified in the outer fuel and FCCI regions. Furthermore, this study suggests that, for the irradiation conditions specific to this cross-section, minor actinides have little impact on FCCI behavior beyond what would be observed in typical HT-9 clad U-Pu-Zr fuel pins systems.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Actinide, Activation Product and Fission Product Decay Data for Reactor-based Applications

The UK Activation Product Decay Data Library was first released in September 1977 as UK-PADD1, to be followed by regular improvements on an almost yearly basis up to the assembly of UKPADD6.12 in March 2013. Similarly, the UK Heavy Element and Actinide Decay Data Library followed in December 1981 as UKHEDD1, with the implementation of various modifications leading to UKHEDD2.6, February 2008. Both the data content and evaluation procedures are defined, and the most recent evaluations are described in terms of specific radionuclides and the resulting consistency of their recommended decay-data files. New versions of the UKPADD and UKHEDD libraries are regularly submitted to the NEA Data Bank for possible inclusion in the JEFF library.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

EXAFS as a probe of actinide oxide formation in the tender X-ray regime

Recent developments in Resonant Inelastic X-Ray Scattering Experiments have vastly improved the resolution in X-ray Spectroscopies such as X-ray Absorption. However, the use of Tender X-rays (~3 keV) and the reactivity of actinides such as uranium have given rise to new questions about bulk and surface sensitivity, what constitutes a surface and how to characterize the formation of an oxide. It will be shown herein that the in situ electron scattering features that are part of the RIXS spectrum can be used to quantify the uranium oxide formation and determine cleanliness, independently of the near edge features that provide information about the unoccupied electronic density of states.

36 MATERIALS SCIENCE↗

Activation of CO 2 by Actinide Cations (Th + , U + , Pu + , and Am + ) as Studied by Guided Ion Beam and Triple Quadrupole Mass Spectrometry

Reactions of CO 2 with Th+ have been studied using guided ion beam tandem mass spectrometry (GIBMS) and with An + (An + = Th + , U + , Pu + , and Am + ) using triple quadrupole inductively coupled plasma mass spectrometry (QQQ-ICP-MS). Additionally, the reactions ThO + + CO and ThO + + CO 2 were examined using GIBMS. Modeling the kinetic energy dependent GIBMS data allowed determination of bond dissociation energies (BDEs) for D o (Th + -O) and D o (OTh + -O) that are in reasonable agreement with previous GIBMS measurements. The QQQ-ICP-MS reactions were studied at higher pressures where multiple collisions between An + and the neutral CO 2 occur. As a consequence, both AnO + and AnO 2 + products were observed for all An + except Am + , where only AmO + was observed. Here, the relative abundances of the observed monoxides compared to the dioxides are consistent with previous reports of the AnO n + (n = 1, 2) BDEs. Comparison of the periodic trends of the group 4 transition metal, lanthanide (Ln), and actinide atomic cations in reactions with CO 2 (a formally spin-forbidden reaction for most M + ground states), and O 2 (a spin unrestricted reaction) indicate that spin conservation plays a minor role, if any, for the heavier An + metals. Further correlation of Ln + and An + + CO 2 reaction efficiencies with the promotion energy (E p ) to the first electronic state with two valence d-electrons (E p (5d 2 ) for Ln + and E p (6d 2 ) for An + ) indicates that the primary limitation in the activation of CO 2 is the energetic cost to promote from the electronic ground state of the atomic metal ion to a reactive state.

bond activation↗

Structural and Bonding Analysis in Monomeric Actinide(IV) Oxalate from Th(IV) to Pu(IV): Comparison with the An(IV) Nitrate Series

In this work, single-crystal X-ray diffraction (SC-XRD) structures and Raman spectra of a series of new isomorphous molecular An(IV)-oxalate compounds (Th, U, Np, and Pu) are reported. These complexes are crystallized with cobalt(III) hexamine ([Co(NH 3 ) 6 ] 3+ ) as the counter cations, [Co(NH 3 ) 6 ] 2 [An(C 2 O 4 ) 5 ]·4H 2 O, revealing five bidentate nonbridging oxalate ligands in the first coordination sphere (CN = 10). The nonbridging oxalate is rather uncommon for An(IV)-oxalate systems, which are widely characterized as polymeric compounds. Density functional theory (DFT) calculations were performed to examine the bonding between An(IV) cations and oxalate ligands. For comparison, we also report results obtained for the An(IV)-hexanitrate series, [(C 2 H 5 ) 4 N] 2 [An(NO 3 ) 6 ] (with An = Th, U, Np, Pu, and Ce), which consists of O-donor ligands as well but with a larger coordination number (CN = 12). The bonding analysis confirms that the actinide–oxygen bond is predominantly ionic with a minor increase in covalency from Th to U and slight variations from U to Pu. Further comparison showed that the charge transfer increases slightly when increasing the number of anions in the coordination sphere (C 2 O$_4^{2–}$: CN = 10; NO$_3^–$: CN = 12), but covalent effects as indicated by the amount of internuclear electron density accumulation are small and similar for oxalate and nitrate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Group Hexavalent Actinide Separations: A New Approach to Used Nuclear Fuel Recycling

Hexavalent Np, Pu, and Am individually, and as a group, have all been cocrystallized with UO 2 (NO 3 ) 2 ∙ 6H 2 O, constituting the first demonstration of an An(VI) group cocrystalliza- tion. The hexavalent dioxo cations of Np, Pu, and Am cocrystallize with UO 2 (NO 3 ) 2 ∙ 6H 2 O in near proportion with a simple reduction in temperature, while the lower valence states, An(III) and An(IV), are only slightly removed from solution. A separation of An(VI) species from An(III) ions by crystallization has been demonstrated, with an observed separation factor of 14. Separation of An(VI) species from key fission products, 95 Zr, 95 Nb, 137 Cs, and 144 Ce, has also been demonstrated by crystallization, with separation factors ranging from 6.5 to 71 in the absence of Am(VI), while in the presence of Am(VI), the separation factors were reduced to 0.99 7.7. One interesting observation is that Am(VI) shows increased stability in the cocrystallized form, with no reduction observed after 13 days, as opposed to in solution, in which >50% is reduced after only 10 days. The ability to cocrystallize and stabilize hexavalent actinides from solution, especially Am(VI), introduces a new separations approach that can be applied to closing the nuclear fuel cycle.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗