Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “abort”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27
All sourcesNASA NTRSDOE OSTI
NASA NTRS1971

Modular space station phase B extension: Shuttle interface requirements

The interface requirements cover both the ground and orbital phases of operation from the launch of the first MSS module until the initial modular station has been manned and in routine operation. As a point of reference, the two-stage, fully reusable space shuttle was selected. The space shuttle is briefly described from the standpoint of its features most important to the interface requirements with the MSS. The environment induced upon the MSS elements when transported to and from orbit by the shuttle orbiter also is included. The mission operation includes the space shuttle launch facilities, the ground flow of the MSS modules, and the orbital operations of rendezvous, MSS buildup, resupply of the manned station, and orbiter descent and landing. The shuttle's once-around abort case is described as it affects the MSS interface requirements. The interfaces between the orbiter and the MSS resulting from the ground and orbital operations, are also described.

Source record↗
NASA NTRS1972

Experiments on the dynamic stability of the space shuttle

Some dynamic stability experiments on the space shuttle using a half-model oscillatory technique are discussed. Resulting information from the experiments is presented and includes: (1) dynamic pitching characteristics of both the orbiter and the booster alone as well as of the two models mated into a single launch configuration; (2) the static and dynamic interference effects during an abort separation maneuver; and (3) the dynamic plume interference effect.

Orlik-Rueckermann, K. J.↗
NASA NTRS1972

Study of solid rocket motors for a space shuttle booster. Volume 1: Executive summary

The factors affecting the choice of the 156 inch diameter, parallel burn, solid propellant rocket engine for use with the space shuttle booster are presented. Primary considerations leading to the selection are: (1) low booster vehicle cost, (2) the largest proven transportable system, (3) a demonstrated design, (4) recovery/reuse is feasible, (5) abort can be easily accomplished, and (6) ecological effects are minor.

Vonderesch, A. H.↗
NASA NTRS1972

Study of solid rocket motors for a space shuttle booster. Volume 2, book 1: Analysis and design

An analysis of the factors which determined the selection of the solid rocket propellant engines for the space shuttle booster is presented. The 156 inch diameter, parallel burn engine was selected because of its transportability, cost effectiveness, and reliability. Other factors which caused favorable consideration are: (1) recovery and reuse are feasible and offer substantial cost savings, (2) abort can be easily accomplished. and (3) ecological effects are acceptable.

Source record↗
NASA NTRS1972

Investigation of the McDonnell-Douglas orbiter and booster shuttle models in proximity at Mach numbers 2.0 to 6.0. Volume 7: Proximity data at Mach 4 and 6, interference free and launch vehicle data

Aerodynamic data obtained from a space shuttle abort stage separation wind tunnel test are presented. The .00556 scale models of the orbiter and booster configuration were tested in close proximity using dual balances during the time period of April 21 to April 27 1971. Data were obtained for both booster and orbiter over an angle of attack range from -10 to 10 deg for zero degree sideslip angle. The models were tested at several relative incidence angles and separation distances and power conditions. Plug nozzles utilizing air were used to simulate booster and orbiter plumes at various altitudes along a nominal ascent trajectory. Powered conditions were 100, 50, 25 and 0 percent of full power for the orbiter and 100, 50 and 0 percent of full power for the booster. Pitch control effectiveness data were obtained for both booster and orbiter with power on and off. In addition, launch vehicle data with and without booster power were obtained utilizing a single balance in the booster model. Data were also obtained with the booster canard off in close proximity and for the launch configuration.

Trimmer, L. L.↗
NASA NTRS1972

Safe atmosphere entry of an isotope heat source with a single stable trim attitude at hypersonic speeds

A theoretical investigation has been made to design an isotope heat source capable of satisfying the conflicting thermal requirements of steady-state operation and atmosphere entry. The isotope heat source must transfer heat efficiently to a heat exchange during normal operation with a power system in space, and in the event of a mission abort, it must survive the thermal environment of atmosphere entry and ground impact without releasing radioactive material. A successful design requires a compatible integration of the internal components of the heat source with the external aerodynamic shape. To this end, configurational, aerodynamic, motion, and thermal analyses were coupled and iterated during atmosphere entries at suborbital through superorbital velocities at very shallow and very steep entry angles. Results indicate that both thermal requirements can be satisfied by a heat source which has a single stable aerodynamic orientation at hypersonic speeds. For such a design, the insulation material required to adequately protect the isotope fuel from entry heating need extend only half way around the fuel capsule on the aerodynamically stable (wind-ward) side of the heat source. Thus, a low-thermal-resistance, conducting heat path is provided on the opposite side of the heat source through which heat can be transferred to an adjacent heat exchanger during normal operation without exceeding specified temperature limits.

Levy, L. L., Jr.↗
NASA NTRS1972

Liquid-propellant dynamics and suppression

Technology related to liquid-propellant interactions with space shuttle vehicles is reviewed. Potential problems unique to the shuttle include liquid-structure interactions resulting from coupled lateral and longitudinal deformations, traveling wave phenomena at shallow propellant levels, and liquid impact during abort, staging, or docking. Technology efforts to define the slosh dynamics under shuttle operating conditions are described with emphasis on analytical representations of the liquid by finite-element and marker-and-cell methods. In addition, slosh suppression is discussed and includes baffle damping and pressure loads for tanks fitted with multiple baffles both above and below the undisturbed liquid surface.

Stephens, D. G.↗
NASA NTRS1971

Shuttle operations, maintenance, and safety.

Review of a systematic search for practical solutions in the areas of space shuttle cryogenics, flight operations, ground operations, and safety. The insulation of the main-propulsion hydrogen tanks for both booster and orbiter to prevent water condensation is considered, as well as the insulation of the orbiter's orbital cryogen tanks for ground storage. Two approaches to the feeding of cryogens are outlined - namely, an approach depending on a periodic axial force to settle propellants and refill the basket, and a method of continuous feed through a capillary network adjacent to the walls throughout the tank, the latter method being independent of vehicle thrust. The development of reliable cryogen components is discussed, and the results of studies of launch-abort problems, shuttle approach and landing techniques, and the tolerance of ?deconditioned' crew and passengers to shuttle reentry g-loads are cited.

Beddingfield, S. T.↗
NASA NTRS1972

Manned space flight nuclear system safety. Volume 3: Reactor system preliminary nuclear safety analysis. Part 2: Accident Model Document (AMD)

The Accident Model Document is one of three documents of the Preliminary Safety Analysis Report (PSAR) - Reactor System as applied to a Space Base Program. Potential terrestrial nuclear hazards involving the zirconium hydride reactor-Brayton power module are identified for all phases of the Space Base program. The accidents/events that give rise to the hazards are defined and abort sequence trees are developed to determine the sequence of events leading to the hazard and the associated probabilities of occurence. Source terms are calculated to determine the magnitude of the hazards. The above data is used in the mission accident analysis to determine the most probable and significant accidents/events in each mission phase. The only significant hazards during the prelaunch and launch ascent phases of the mission are those which arise form criticality accidents. Fission product inventories during this time period were found to be very low due to very limited low power acceptance testing.

Source record↗
NASA NTRS1972

Technical report analysis and design: Study of solid rocket motors for a space shuttle booster, volume 2, book 1, supplement 1

An analysis and design effort was conducted as part of the study of solid rocket motor for a space shuttle booster. The 156-inch-diameter, parallel burn solid rocket motor was selected as its baseline because it is transportable and is the most cost-effective, reliable system that has been developed and demonstrated. The basic approach was to concentrate on the selected baseline design, and to draw from the baseline sufficient data to describe the alternate approaches also studied. The following conclusions were reached with respect to technical feasibility of the use of solid rocket booster motors for the space shuttle vehicle: (1) The 156-inch, parallel-burn baseline SRM design meets NASA's study requirements while incorporating conservative safety factors. (2) The solid rocket motor booster represents a cost-effective approach. (3) Baseline costs are conservative and are based on a demonstrated design. (4) Recovery and reuse are feasible and offer substantial cost savings. (5) Abort can be accomplished successfully. (6) Ecological effects are acceptable.

Source record↗
NASA NTRS1973

Space shuttle: Preliminary pressure distributions on the 049 orbiter, orbiter in presence of H/O tank and orbiter in launch configuration

The 049 orbiter and launch configurations were tested in a trisonic wind tunnel to obtain preliminary loads information on the orbiter alone, orbiter in presence of the H/O tank and orbiter in the full launch configuration. The orbiter consisted of the baseline 049 double-delta wing, twin vertical stabilizers, seven degrees of dihedral and included abort rockets. The orbiter was mounted at minus 1.50 degree of incidence (fuselage centerline relative to H/O tank centerline) in the launch configuration. The solid rocket motors were mounted at a radial location of 21 degrees from the horizontal centerline of the H/O tank. The test was conducted over a Mach number range of 0.6 to 4.96. Nominal angle of attack and angle of sideslip ranges of minus 6 to plus 6 degrees were tested. In addition, the orbiter alone was tested over an angle of attack range of minus 6 to plus 26 degrees.

Hamilton, J. T.↗
NASA NTRS1971

Calibration of propulsion simulation nozzles for space shuttle booster and orbiter models for the abort/separation staging experimental program

An experimental program to determine the power-on aerodynamic flight characteristics of the booster and orbiter vehicles during the abort separation maneuver is reported. An essential contribution to such a test program is the gas dynamic simulation of the size and shape of the plumes emitting from the full-scale orbiter and booster main propulsion systems. The two major effects of the plume which must be simulated are: the interaction of the plume with the external flow field, and the direct impingement of the plumes on surfaces which are enveloped by the plume. To accomplish the objective of correct plume simulation, the similarity parameters developed by Herron and the requirement to match momentum flux per unit area between the model and the full-scale systems, were applied to the orbiter and booster propulsion systems.

Baker, L. R., Jr.↗
NASA NTRS1970

Guidance, navigation, and control systems performance analysis: Apollo 13 mission report

The conclusions of the analyses of the inflight performance of the Apollo 13 spacecraft guidance, navigation, and control equipment are presented. The subjects discussed are: (1) the command module systems, (2) the lunar module inertial measurement unit, (3) the lunar module digital autopilot, (4) the lunar module abort guidance system, (5) lunar module optical alignment checks, and (6) spacecraft component separation procedures.

Source record↗
NASA NTRS1973

Studies for determining rapid thrust response requirements and techniques for use in a long range transport aircraft

Propulsion systems proposed for the next generation of long-range transport aircraft will utilize advanced technology to reduce the noise to levels that will be inoffensive to the community. Additional reductions can be realized by adopting steeper glide slopes during the landing approach. The aircraft dynamic characteristics and methods of obtaining rapid engine response during the go-around maneuver from an aborted landing approach are identified and discussed. The study concludes that the present levels of flight safety will not be compromised by the steeper approach.

Newirth, D. M.↗
NASA NTRS1973

Apollo experience report: Evolution of the rendezvous-maneuver plan for the lunar-landing missions

The evolution of the nominal rendezvous-maneuver plan for the lunar landing missions is presented along with a summary of the significant development for the lunar module abort and rescue plan. A general discussion of the rendezvous dispersion analysis that was conducted in support of both the nominal and contingency rendezvous planning is included. Emphasis is placed on the technical developments from the early 1960's through the Apollo 15 mission (July to August 1971), but pertinent organizational factors also are discussed briefly. Recommendations for rendezvous planning for future programs relative to Apollo experience also are included.

Alexander, J. D.↗
NASA NTRS1972

Social, economic and political factors associated with earth resources observation and information analyses.

Discussion of some of the interest conflicts between ecology and economics that arise, particularly in riparian environments, when a population-increase entailed growth in public service requirements is met by indiscriminate technology applications. Reviewed instances of such conflicts include the aborted cross-Florida barge canal project and the Florida Power and Light Company facility at Turkey point.

Hall, J. J.↗
NASA NTRS1972

An isotope heat source integrated with a 7 kW/e/ to 25 kW/e/ Brayton cycle space power supply.

The power system described is intended for applications in a manned space mission. The Isotope Reentry Vehicle (IRV) developed is considered together with the Heat Source (HS), the Heat Source Heat Exchanger and the Brayton Cycle Power Conversion Module. Other subjects discussed include the IRV/Brayton cycle spacecraft integration concept, abort and deorbit mechanization, emergency cooling methods, and crew shielding requirements. Mounting and integration for the IRV is to a large degree controlled by nuclear safety requirements. Another major factor in the installation concept is the type of emergency cooling or passive heat dump mode used in rejection of HS energy.

Ryan, R. L.↗