Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “VELOCITY DISTRIBUTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Mutual colliding impact fast ignition

It is proposed to apply the well established colliding beam technology of high energy physics to the fast hot spot ignition of a highly compressed DT (deuterium-tritium) target igniting a larger D (deuterium) burn, by accelerating a small amount of solid deuterium, and likewise a small amount of tritium, making a head-on collision in the center of the target, projecting them through conical ducts situated at the opposite side of the target and converging in its center. In their head-on collision, the relative collision velocity is 5/3 times larger compared to the collision velocity of a stationary target. The two pieces have for this reason to be accelerated to a smaller velocity than would otherwise be needed to reach upon impact the same temperature. Since the velocity distribution of the two head-on colliding projectiles is with its two velocity peaks non-Maxwellian, the maximum cross section velocity product turns out to be substantially larger than the maximum if averaged over a Maxwellian. The D and T projectiles would have to be accelerated with two sabots driven by powerful particle or laser beams, permitting a rather large acceleration length. With the substantially larger cross section-velocity product by virtue of the non-Maxwellian velocity distribution, a further advantage is that the head-on collision produces a large magnetic field by the thermomagnetic Nernst effect, enhancing propagating burn. With this concept, the ignition of the neutron-less hydrogen-boron (HB{sup 11}) reaction might even be possible in a heterogeneous assembly of the hydrogen and the boron to reduce the bremsstrahlung-losses, resembling the heterogeneous assembly in a graphite-natural uranium reactor, there to reduce the neutron losses.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

On the discontinuity in kinetic solutions of the collisionless polar wind

The use of a Maxwellian ion velocity distribution in kinetic solutions of the collisionless polar wind regime results in a velocity distribution and associated moments that display sharp discontinuities at the boundary, which quantitatively affects the solution at high altitudes. This paper investigates the causes of this discontinuity, using both analytical and numerical approaches; it is shown that the choice of appropriate boundary conditions will eliminate the discontinuity.

Khoyloo, A.↗

Data Reduction Procedures for Laser Velocimeter Measurements in Turbomachinery Rotors

Blade-to-blade velocity distributions based on laser velocimeter data acquired in compressor or fan rotors are increasingly used as benchmark data for the verification and calibration of turbomachinery computational fluid dynamics (CFD) codes. Using laser Doppler velocimeter (LDV) data for this purpose, however, must be done cautiously. Aside from the still not fully resolved issue of the seed particle response in complex flowfields, there is an important inherent difference between CFD predictions and LDV blade-to-blade velocity distributions. CFD codes calculate velocity fields for an idealized rotor passage. LDV data, on the other hand, stem from the actual geometry of all blade channels in a rotor. The geometry often varies from channel to channel as a result of manufacturing tolerances, assembly tolerances, and incurred operational damage or changes in the rotor individual blades.

Lepicovsky, Jan↗

Launch Vehicle Debris Models and Crew Vehicle Ascent Abort Risk

For manned space launch systems, a reliable abort system is required to reduce the risks associated with a launch vehicle failure during ascent. Understanding the risks associated with failure environments can be achieved through the use of physics-based models of these environments. Debris fields due to destruction of the launch vehicle is one such environment. To better analyze the risk posed by debris, a physics-based model for generating launch vehicle debris catalogs has been developed. The model predicts the mass distribution of the debris field based on formulae developed from analysis of explosions. Imparted velocity distributions are computed using a shock-physics code to model the explosions within the launch vehicle. A comparison of the debris catalog with an existing catalog for the Shuttle external tank show good comparison in the debris characteristics and the predicted debris strike probability. The model is used to analyze the effects of number of debris pieces and velocity distributions on the strike probability and risk.

Gee, Ken↗

Velocity perturbation distributions in the breakup of artificial satellites

A method is presented for calculating the three orthogonal components of the velocity perturbations of satellite fragments, with a view to ascertaining the nature and intensity of the satellite breakup. The method employs three simultaneous equations furnished by changes in fragment specific energy, specific angular momentum, and plane orientation. Velocity perturbations are thereby calculated for fragments from 20 major satellite breakup events; these results, in conjunction with a technique for determining fragment masses, yield a description of the breakup process.

Badhwar, Gautam D.↗

Nonequilibrium molecular motion in a hypersonic shock wave

Molecular velocities have been measured inside a hypersonic, normal shock wave, where the gas experiences rapid changes in its macroscopic properties. As first hypothesized by Mott-Smith, but never directly observed, the molecular velocity distribution exhibits a qualitatively bimodal character that is derived from the distribution functions on either side of the shock. Quantitatively correct forms of the molecular velocity distribution function in highly nonequilibrium flows can be calculated, by means of the Direct Simulation Monte Carlo technique.

Pham-Van-diep, G.↗

Multi-point inverse design of an infinite cascade of airfoils

This paper describes a practical method for the design of an infinite cascade in incompressible flow. The method is based on conformal mapping, and as a result it allows for multi-point design. The cascade blade to be determined is divided into a desired number of segments. Over each segment, the velocity distribution is prescribed together with an inlet or outlet flow angle at which this velocity distribution is to be achieved. In this way multi-point design requirements can be met. It is necessary to satisfy several conditions that arise to guarantee compatibility with the inlet and outlet flow as well as closure of the cascade blade. Satisfaction of these conditions does not necessarily result in a cascade with all the desired characteristics. For example, the cascade blades may be bulbous or crossed. Through Newton iteration, however, the desired characteristics may be prescribed by allowing for the adjustment of the design parameters that define the mathematical problem through conformal mapping. Several examples will be illustrated to demonstrate the capability of the method. It will be shown that the method is limited to the design of cascades with solidities of up to one.

Selig, Michael S.↗

Multipoint inverse design of an infinite cascade of airfoils

This paper describes a method for the design of an infinite cascade in incompressible flow. The method is based on conformal mapping and does not allow for multipoint design. The cascade blade is to determined is divided into a number of segments. Over each segment, the velocity distribution is prescribed together with an inlet or outlet flow angle at which this velocity distributions is to be achieved. In this way multipoint design requirements can be met. It is necessary to satisfy several conditions that arise to guarantee compatibility with the inlet and outlet flow as well as closure of the cascade blade. Satisfaction of these conditions does not necessarily result in a cascade with all of the desired characteristucs. For example, the cascade blades may be bulbous or crossed. Through Newtonian iteration, however, the desired characteristics may be prescribed directly. Four examples will be illustrated to demonstrate the capability of the method.

Selig, M. S.↗

To the Edge of M87 and Beyond: Spectroscopy of Intracluster Globular Clusters and Ultracompact Dwarfs in the Virgo Cluster

We present the results of a wide-field spectroscopic survey of globular clusters (GCs) in the Virgo cluster. We obtain spectra for 201 GCs and 55 ultracompact dwarfs (UCDs) using Hectospec on the Multiple-Mirror Telescope and derive their radial velocities. We identify 46 genuine intracluster GCs (IGCs), not associated with any Virgo galaxies, using the 3D GMM test on the spatial and radial velocity distribution. They are located at a projected distance 200 kpc≲R ≲500 kpc from the center of M87. The radial velocity distribution of these IGCs shows two peaks, one at v{sub r} = 1023 km s{sup −1}, associated with the Virgo main body, and another at v {sub r}=36 km s{sup −1}, associated with the infalling structure. The velocity dispersion of the IGCs in the Virgo main body is σ{sub GC}∼314 km s{sup −1}, which is smoothly connected to the velocity dispersion profile of M87 GCs but is much lower than that of dwarf galaxies in the same survey field, σ {sub dwarf}∼608 km s{sup −1}. The UCDs are more centrally concentrated on massive galaxies - M87, M86, and M84. The radial velocity dispersion of the UCD system is much smaller than that of dwarf galaxies. Our results confirm the large-scale distribution of Virgo IGCs indicated by previous photometric surveys. The color distribution of the confirmed IGCs shows a bimodality similar to that of M87 GCs. This indicates that most IGCs are stripped off dwarf galaxies and some off massive galaxies in the Virgo.

79 ASTRONOMY AND ASTROPHYSICS↗

Supplement to LA-UR-17-21218: Application to SSVD

We apply the formalism derived in LA-UR-17-21218 to the prescription for an RMI-based self-similar velocity distribution (SSVD) derived by Ham- merberg et al.. We compute analytically the true [mt(t)] and inferred [mi(t)] ejecta mass arriving at the piezoelectric sensor for several shots de- scribed in the literature and compare the results to the data. We nd that while the \RMI + SSVD" prescription gives rise to decent estimates for the nal accumulated mass at the pin, the time-dependent accumulation rises too sharply and linearly to agree with data. We also compute the time-dependent pressure and voltage at the sensor, and compare the latter to data. The pres- sure does not rise smoothly from zero, instead exhibiting a strong surge as the leading edge of the ejecta cloud arrives, which produces an initial sharp spike in the voltage trace, which is not observed. These inconsistencies result from a discontinuity in the prescribed self-similar velocity distribution at maximum relative velocity.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ab initio modeling of the motional Stark effect on MAST

A multichord motional Stark effect (MSE) system has recently been built on the MAST tokamak. In MAST the {pi} and {sigma} lines of the MSE spectrum overlap due to the low magnetic field typical for present day spherical tokamaks. Also, the field curvature results in a large change in the pitch angle over the observation volume. The measured polarization angle does not relate to one local pitch angle but to an integration over all pitch angles in the observation volume. The velocity distribution of the neutral beam further complicates the measurement. To take into account volume effects and velocity distribution, an ab initio code was written that simulates the MSE spectrum on MAST. The code is modular and can easily be adjusted for other tokamaks. The code returns the intensity, polarized fraction, and polarization angle as a function of wavelength. Results of the code are presented, showing the effect on depolarization and wavelength dependence of the polarization angle. The code is used to optimize the design and calibration of the MSE diagnostic.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effects of additively manufactured surface roughness on small diameter plenums with multiple side discharges for high temperature gas turbine blade cooling applications

Combined heat and power (CHP) applications have significant environmental and economic benefits that are consistent with the goals of the U.S. Department of Energy (DOE). One area that is currently being studied includes the potential benefits of CHP turbine operation at higher turbine inlet temperatures. Internal cooling concepts enabled by additive manufacturing (AM) are of primary interest. Here, the effectiveness of internal cooling is hindered by many factors such as velocity distribution of the cooling air to the hot surface considering impingement cooling. To simulate cooling air exiting from a series of orifices for internal cooling in an airfoil, a straight smooth wall tubing with multiple side discharging orifices is used and compared to additively manufactured tubing (Ti6Al4V Grade 23) with orifice size and spacing as well as inner and outer diameters identical to the smooth wall tubing. Similar to flow discharging form perforated pipes, the flow discharged from individual orifices along the tubes in this study is found to be nonuniformly distributed, and the horizontal (axial direction) momentum can be observed from the experimental data. Discharge velocities have been measured with two-dimensional (2D) particle imaging velocimetry (PIV) and single element hot wire anemometry. Numerical analysis has also been conducted to predict the velocity distributions along the orifices in the smooth wall and additive manufacturing (AM) tubing, which are inherited with surface roughness. Numerical and measured results in this study are compared, presented, and discussed.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Large-scale Linear Magnetic Holes with Magnetic Mirror Properties in Hybrid Simulations of Solar Wind Turbulence

Magnetic holes (MHs) are coherent magnetic field dips whose size ranges from fluid to kinetic scale, ubiquitously observed in the heliosphere and in planetary environments. Despite the long-standing effort in interpreting the abundance of observations, the origin and properties of MHs are still debated. In this Letter, we investigate the interplay between plasma turbulence and MHs, using a 2D hybrid simulation initialized with solar wind parameters. We show that fully developed turbulence exhibits localized elongated magnetic depressions, whose properties are consistent with linear MHs frequently encountered in space. The observed MHs develop self-consistently from the initial magnetic field perturbations by trapping hot ions with large pitch angles. Ion trapping produces an enhanced perpendicular temperature anisotropy that makes MHs stable for hundreds of ion gyroperiods, despite the surrounding turbulence. We introduce a new quantity, based on local magnetic field and ion temperature values, to measure the efficiency of ion trapping, with potential applications to the detection of MHs in satellite measurements. We complement this method by analyzing the ion velocity distribution functions inside MHs. Our diagnostics reveal the presence of trapped gyrotropic ion populations, whose velocity distribution is consistent with a loss cone, as expected for the motion of particles inside a magnetic mirror. Our results have potential implications for the theoretical and numerical modeling of MHs.

79 ASTRONOMY AND ASTROPHYSICS↗

Numerical solutions of sheath structures in front of an electron-emitting electrode immersed in a low-density plasma

The exact theoretical expressions involved in the formation of sheath in front of an electron emitting electrode immersed in a low-density plasma have been derived. The potential profile in the sheath region has been calculated for subcritical, critical, and supercritical emissions. The potential profiles of critical and supercritical emissions reveals that we must take into account a small, instead of zero, electric field at the sheath edge to satisfy the boundary conditions used to integrate the Poisson's equation. The I-V curves for critical emission shows that only high values of plasma-electron to emitted-electron temperature ratio can meet the floating potential of the emissive electrode. A one-dimensional fluid like model is assumed for ions, while the electron species are treated as kinetic. The distribution of emitted-electron from the electrode is assumed to be half Maxwellian. The plasma-electron enters the sheath region at sheath edge with half Maxwellian velocity distribution, while the reflected ones have cut-off velocity distribution due to the absorption of super thermal electrons by the electrode. The effect of varying emitted-electron current on the sheath structure has been studied with the help of a parameter G (the ratio of emitted-electron to plasma-electron densities)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Three-dimensional single particle tracking in dense dust clouds by stereoscopy of fluorescent particles

In dense dust clouds of a dusty plasma single particle trajectories are impossible to follow due to occlusion of particles and ambiguities in particle correspondences. By stereoscopic imaging of fluorescent tracer particles, we were able to reconstruct 3D single particle trajectories within dense dust clouds. Several measurements are shown that justify to regard the tracer particles as suitable representatives for the whole dust system. A first analysis of dust density waves in dense clouds already shows that these waves exhibit three-dimensional dynamics at larger wave amplitudes that cannot be resolved by 2D imaging techniques: a broad velocity distribution perpendicular to the oscillation plane due to dust-dust collisions is seen, while the velocity distribution in the oscillation direction is bimodal and shifted due to the bulk wave propagation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The effect of a non-Maxwellian electron distribution on oxygen and iron ionization balances in the solar corona

Analytic expressions are derived for ionization and recombination rates in a parameterized non-Maxwellian electron velocity distribution with an enhanced high-energy tail. These expressions are then used in investigating the effect of such an enhancement in the high-energy tail of the coronal electron velocity distribution on the oxygen and iron ionization balances, O(+6) - O(+7) and Fe(+11) - Fe(+12). Relative to a Maxwellian of the same mean electron energy, the degree of ionization allowed by such a distribution is found to be either unchanged or slightly decreased for iron but often substantially increased for oxygen. The greater sensitivity of oxygen ionization balance to the high-energy distribution tail derives from the higher oxygen ionization threshold energy. It is noted that the electron temperature inferred from a measurement of the oxygen ionization ratio, O(+6)/O(+7), could indeed overestimate the actual coronal electron temperature by nearly 10 to the 6th K if the coronal electron distribution is incorrectly assumed to be Maxwellian.

Owocki, S. P.↗

Morphological and physical characteristics of the Virgo Cluster - First results from the Las Campanas photographic survey

Preliminary results are presented of a photographic survey of the Virgo cluster to the faintest convenient limit of the Las Campanas du Pont 2.5 m reflector, performed in order to study the complexity of both the surface and velocity distributions within the central 6 degree radius region. The survey is described and the resulting Catalog is discussed, and the frequency of galaxy types found and listed in the Catalog is described. The physical properties of the dwarfs are summarized, and luminosity functions are given separately for each morphological type. The progressive change of (MBT) faintward along the morphological sequence from Sc I through Sm and Im types is shown, leading to a calibration of the de Vaucouleurs Lambda luminosity index and a determination of its intrinsic dispersion. The preliminary results on the distribution of galaxies of all types in the two principal subclustering regions found are summarized, and the velocity distributions over the face of the 6 degree core are discussed for the various galaxy types.

Sandage, A.↗

Rotational velocities of newly discovered, low-mass members of the Alpha Persei cluster

About 30 new, low-mass members of the young open cluster Alpha Persei are identified via a proper-motion study and subsequent photometric and spectroscopic observations. Membership in the cluster is confirmed for a number of the fainter proper-motion candidates from Heckman, Dieckvoss, and Kox (1956). Coordinates, finding charts, BVRI photometry, and rotational velocities are provided for most of the stars. At least two of the stars show peculiar H-alpha emission profiles, with weak but very broad emission wings, and relatively narrow absorption reversals. The rotational velocity distribution for low-mass stars in the Alpha Per cluster are compared with recently derived rotational velocity distributions for T Tauri stars, placing strong constraints on the mechanisms for angular momentum loss during pre-main-sequence evolution.

Stauffer, John R.↗