Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Trusses”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Underlying modal data issues for detecting damage in truss structures

Independent of the modal identification techniques employed for damage detection, use of measured modal data limits the expectations for damage location. These limitations are examined using the distribution of modal strain energy and the sensitivity of the frequency and mode shapes to structural stiffness changes. For given measured modal information of specific accuracy, this examination reveals the following: (1) damage detection is feasible for members that contribute significantly to the strain energy of the measured modes, (2) the modes which are most effective in detecting damage to certain critical members can be identified, and (3) a relationship can be drawn between the accuracy of the measured modes and frequencies and damage detection feasibility.

Kashangaki, Thomas A-L.↗
NASA NTRS1992

Development of a truss joint for robotic assembly of space structures

This report presents the results of a detailed study of mechanical fasteners which were designed to facilitate robotic assembly of structures. Design requirements for robotic structural assembly were developed, taking into account structural properties and overall system design, and four candidate fasteners were designed to meet them. These fasteners were built and evaluated in the laboratory, and the Hammer-Head joint was chosen as superior overall. It had a high reliability of fastening under misalignments of 2.54 mm (0.1 in) and 3 deg, the highest end fixity (2.18), the simplest end effector, an integral capture guide, good visual verification, and the lightest weight (782 g, 1.72 lb). The study found that a good design should incorporate chamfers sliding on chamfers, cylinders sliding on chamfers, and hard surface finishes on sliding surfaces. The study also comments on robot flexibility, sag, hysteresis, thermal expansion, and friction which were observed during the testing.

Parma, George F.↗
NASA NTRS1992

Software design for automated assembly of truss structures

Concern over the limited intravehicular activity time has increased the interest in performing in-space assembly and construction operations with automated robotic systems. A technique being considered at LaRC is a supervised-autonomy approach, which can be monitored by an Earth-based supervisor that intervenes only when the automated system encounters a problem. A test-bed to support evaluation of the hardware and software requirements for supervised-autonomy assembly methods was developed. This report describes the design of the software system necessary to support the assembly process. The software is hierarchical and supports both automated assembly operations and supervisor error-recovery procedures, including the capability to pause and reverse any operation. The software design serves as a model for the development of software for more sophisticated automated systems and as a test-bed for evaluation of new concepts and hardware components.

Herstrom, Catherine L.↗
NASA NTRS1992

Design Feasibility Study of a Space Station Freedom Truss

Here, the focus is on the design and configuration feasibility of the short spacer for the Space Station Program in its launch configuration. The product of this study is being used by Rockwell International (Rocketdyne Division) as they continue their design concept of the current short spacer configuration. It is anticipated that the launch loads will dominate the on-orbit loads and dictate the design configuration of the short spacer. At the present time, the on-orbit loads have not been generated. The structural analysis discussed herein is based on the transient events derived from the Space Transportation System (STS) Interface Control Document (ICD). The transient loading events consist of liftoff loads, landing loads, and emergency landing loads. The quasi-static loading events have been neglected, since the magnitude of the acceleration factors are lower than the transient acceleration factors. The normal mode analyses presented herein are based on the most feasible configurations with acceptable stress ranges.

Armand, Sasan C.↗
NASA NTRS1992

Underlying modal data issues for detecting damage in truss structures

The modal strain energy distribution and frequency and mode shape sensitivities to structural stiffness changes are studied in order to overcome the current limits of modal data limit measurements in damage location. It is established that damage detection is feasible for members significantly contributing to the strain energy of the measured modes; the modes that are most effective in detecting the damage of critical members are identifiable, and a relationship is formulated between the accuracy of the measured modes and frequencies and the probability of damage detection.

Kashangaki, Thomas A.-L.↗
NASA NTRS1992

ROM/RMF control of the flexible, articulated-truss space crane

The large size and extreme flexibility of an articulated space crane entail great difficulties in precision positioning. Control strategies for the flexible multibody system are here developed using a Timoshenko-beam finite-element model (FEM) which captures the system's low frequency characteristics. From the FEM, a reduced-order model (ROM) controller is designed which rotates the fixed shape crane about the base alpha joint to actuate positioning control. Eigenvalue analysis of the closed-loop system shows the destabilizing effect of controller-structure interaction (CSI). Making use of a parallel bank of residual mode filters (RMFs) compensated for CSI, restoring system stability and performance. The linear control law is simulated in closed-loop with the beam model. The ROM-based control law with RMF compensation is an effective, low-order controller.

Reisenauer, Brian T.↗
NASA NTRS1991

Gripper for truss structure assembly

The CIRSSE two-finger gripper is designed to be used with a 6-axis wrist-mounted force-torque sensor as part of an experimental testbed for cooperative robotic manipulation. The gripper system consists of a dedicated controller and a pneumatic powered gripper that is servoed in position or grasping force. The gripper also has a between fingertip light beam sensor. The major features of this new design are: high grasping force to weight ratio (25::1) and compactness (14 cm base-fingertip, 0.8 kilograms); low cost dedicated slave controller; and simple host-controller communications protocol to minimize command interpretation delay. Shared software functions between the host and the controller processor permit the host to select servo mode, servo gain-parameter values, and calibration offsets. Hidden primitive self-test, calibration and servo confidence functions are included.

Kelley, Robert B.↗
NASA NTRS1991

Distributed-effect optical fiber sensors for trusses and plates

Modal domain optical fiber sensors, or distributed effect sensors, for active vibration suppression in flexible structures are considered. Preliminary modeling results indicate that these sensors can be used to sense vibrations in a flexible beam and the signal can be used to damp vibrations in the beam. Weighted distributed-effect sensors can be used to implement high order compensators with low order functional observers.

Reichard, Karl↗
NASA NTRS1993

Two pass method and radiation interchange processing when applied to thermal-structural analysis of large space truss structures

A method of efficient and automated thermal-structural processing of very large space structures is presented. The method interfaces the finite element and finite difference techniques. It also results in a pronounced reduction of the quantity of computations, computer resources and manpower required for the task, while assuring the desired accuracy of the results.

Warren, Andrew H.↗
NASA NTRS1993

Actuator tuning for nonlinear truss structures - A neural network approach

The optimal actuator placement problem encompasses finding their best locations and best gains. The latter is referred to as tuning the actuators. This paper deals with tuning a given set of actuators in presence of known structural nonlinearities arising from gaps at some joints. For this purpose, an efficient neural network-based algorithm is proposed and illustrated using numerical simulations.

Toomarian, N.↗
NASA NTRS1993

System identification of the JPL micro-precision interferometer truss - Test-analysis reconciliation

The JPL Micro-Precision Interferometer (MPI) is a testbed for studying the use of control-structure interaction technology in the design of space-based interferometers. A layered control architecture will be employed to regulate the interferometer optical system to tolerances in the nanometer range. An important aspect of designing and implementing the control schemes for such a system is the need for high fidelity, test-verified analytical structural models. This paper focuses on one aspect of the effort to produce such a model for the MPI structure, test-analysis model reconciliation. Pretest analysis, modal testing, and model refinement results are summarized for a series of tests at both the component and full system levels.

Red-Horse, J. R.↗
NASA NTRS1992

Active figure maintenance control using an optical truss laser metrology system for a space-based far-IR segmented telescope

A two-stage active control approach was developed addressing the figure control problem for a spaceborne FIR telescope, the Precision Segmented Reflectors Focus Moderate Mission Telescope (FMMT). The first active control stage aligns the optical segments based on images; attention is here given to the second stage, active figure maintenance control system, which maintains the alignment of the optical elements between initializations to hold the mirror figure steady while obtaining data and fixes translational and rotational changes of the optical segments induced by long-term thermal drifts of the support structure. Errors are expected to be 10-100 microns at the nodes of the primary backup structure over the course of an orbit. An rms performance of 0.8 microns of wavefront error can be expected during the maintenance function based on specified nominal sensor noises, actuator accuracies, and system environments. A performance of less than 0.3 microns rms can be expected, based on advanced components.

Lau, Kenneth↗