Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TiO”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Structural Evolution and Stability of Rh/TiO 2 Catalysts under CO 2 Hydrogenation Conditions: Influence of the Initial Rh Structure

Characterizing catalyst stability by identifying the predominant mechanisms, timescales and driving forces of catalyst reconstruction under relevant reaction conditions is necessary for the design and commercialization of new catalysts. Here, in this paper, we study Rh/TiO 2 catalysts under CO 2 hydrogenation conditions (773 K, 75% H 2 , 25% CO 2 ) at high conversion and utilize reactivity studies along with ex-situ and in-situ spectroscopy and microscopy to characterize changes in catalyst activity and structure as a function of time on stream and the initial catalyst structure. This is a prototypical catalyst for CO 2 hydrogenation where Rh structure and Rh-TiO 2 interactions have been proposed to explain reactivity, selectivity (between CO and CH 4 formation) and catalyst stability. The influence of the initial Rh structure (varying from Rh single atoms to Rh nanoparticles), support stability, regeneration and pretreatment(s), and the chemical potential(s) of the reaction environment on reaction selectivity and catalyst stability were explored. The product selectivity between CO and CH 4 was determined to be dependent on the relative fraction of Rh single atoms and Rh nanoparticle-TiO 2 interfacial sites under reaction conditions, each exhibiting distinct stability under prolonged time on stream. Surprisingly, Rh single atoms exhibited stability for the duration of 90 h reactivity measurements, even at high Rh density (≥ 1.8 Rh atoms/nm 2 ) on the support, while Rh nanoparticles sintered under reaction conditions. As a result, all catalysts exhibited increasing selectivity to CO with increasing time on stream (> 10 h). We conclude the distribution of Rh structures evolved over time under reaction conditions through three distinct reconstruction mechanisms (Rh particle fragmentation, Ostwald ripening, and particle migration and coalescence) that occurred on varying timescales. Catalyst stability on the ~90 h time scale was ultimately controlled by the initial Rh structure.

25 ENERGY STORAGE↗
DOE OSTI2020

Altered Stability and Degradation Pathway of CH 3 NH 3 PbI 3 in Contact with Metal Oxide

Degradation in CH 3 NH 3 PbI 3 (MAPbI 3 ), when in contact with commonly used metal oxide transport layer materials in optoelectronic devices, is explored experimentally and theoretically. On the basis of the decomposition temperature, the interfacial stability decreases in the following order: MAPbI 3 + TiO 2 ~ MAPbI 3 alone > MAPbI 3 + SnO 2 > MAPbI 3 + NiO, consistent with thermodynamic data. When MAPbI 3 contacts NiO or SnO 2 , experimental results unequivocally show interfacial decomposition occurs at a lower temperature than bulk decomposition and produces different degradation products. Density functional theory calculations reveal an altered reaction pathway on oxide surfaces and elucidate the difference between NiO and TiO 2 . Furthermore, these results pinpoint the importance of understanding the interaction between halide perovskite and other materials used in a device to achieve intrinsically stable devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Stable CdTe Photoanodes with Energetics Matching Those of a Coating Intermediate Band

Here, a TiO 2 coating was grown on a CdTe absorber by atomic layer deposition for stabilization against its photocorrosion during photoelectrochemical water splitting. Under simulated sunlight (AM 1.5G, 100 mW cm –2 ), this multilayer CdS/CdTe/TiO 2 /Ni/NiO x photoanode produced a light-limited photocurrent density of 24.5 ± 0.5 mA cm –2 and a photovoltage of 780 ± 20 mV. This record energy-conversion performance was comparable to those of baseline CdS/CdTe solar cells and was achieved only after the development of proper CdTe surface treatments prior to coating the stabilization layer. The TiO 2 coating, with its in-gap charge-transport intermediate band, facilitates hole transport as light exits the CdTe/TiO 2 interface. With proper interfacial chemistry, the electrochemical potential energy of the coating intermediate band matched that of the CdTe valence band. Moreover, the stabilized CdS/CdTe/TiO 2 /Ni/NiO x photoanodes showed 100 h stability for water oxidation under light-on/light-off cycles. This study provides insightful guidance for designing stabilization contacts for efficient and stable light-driven water oxidation.

14 SOLAR ENERGY↗
DOE OSTI2024

Alumina–Titania Nanolaminate Condensers for Hot Programmable Catalysis

Nanolaminates composed of thin alternating layers of Al2O 3 and TiO 2 (ATO) were engineered by using atomic layer deposition as the dielectric material for a Pt-on-carbon catalytic condenser. Investigation assessed synthesis parameters including the deposition temperature, Al 2 O 3 and TiO 2 layer thicknesses, total number of layers, and a capping Al 2 O 3 layer on the maximum charge accumulation in the Pt catalyst. The highest capacitance ATO configuration demonstrated a specific capacitance of ∼1200 nF/cm 2 with working voltages of ±5 V, enabling the storage of 4 × 10 13 electrons or holes per cm 2 at room temperature. The ATO devices exhibited enhanced capacitance at elevated temperatures of up to 400 °C, suggesting the suitability of these materials for high-temperature applications. Adsorption of carbon monoxide on the Pt/C-ATO device characterized by grazing incidence infrared spectroscopy showed changes in the surface binding energy of 13.1 ± 0.8 kJ/mol for an applied external voltage bias of ±1 V.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Oxygen Atom Transfer Reactions of Colloidal Metal Oxide Nanoparticles

Redox transformations at metal oxide (MO x )/solution interfaces are broadly important, and oxygen atom transfer (OAT) is one of the simplest and most fundamental examples of such reactivity. OAT is a two-electron transfer process, well-known in gas/solid reactions and catalysis. However, OAT is rarely directly observed at oxide/water interfaces, whose redox reactions are typically proposed to occur in one-electron steps. Reported here are stoichiometric OAT reactions of organic molecules with aqueous colloidal titanium dioxide and iridium oxide nanoparticles (TiO 2 and IrO x NPs). Me 2 SO (DMSO) oxidizes reduced TiO 2 NPs with the formation of Me 2 S, and IrO x NPs transfer O atoms to a water-soluble phosphine and a thioether. The reaction stoichiometries were established and the chemical mechanisms were probed using typical solution spectroscopic techniques, exploiting the high surface areas and transparency of the colloids. Furthermore, these OAT reactions, including a catalytic example, utilize the ability of the individual NPs to accumulate many electrons and/or holes. Observing OAT reactions of two different materials, in opposite directions, is a step toward harnessing oxide nanoparticles for valuable multi-electron and multi-hole transformations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Perspectives on Dye Sensitization of Nanocrystalline Mesoporous Thin Films

Recent advances in our mechanistic understanding of dye-sensitized electron transfer reactions occurring at metal oxide interfaces are described. These advances were enabled by the advent of mesoporous thin films, comprised of anatase TiO 2 nanocrystallites, that are amenable to spectroscopic and electrochemical characterization in unprecedented molecular-level detail. The metal-to-ligand charge transfer (MLCT) excited states of Ru polypyridyl compounds serve as the dye sensitizers. Excited-state injection often occurs on ultrafast time scales with yields that can be tuned from unity to near zero through modification of the sensitizer or the electrolyte composition. Transport of the injected electron and the oxidized sensitizer (hole hopping) are both operative in the composite mechanism for charge recombination between the injected electron and the oxidized sensitizer. Sensitizers that contain a pendant electron donor, as well as core/shell SnO 2 /TiO 2 nanostructures, often prolong the lifetime of the injected electron and provide fundamental insights into adiabatic and nonadiabatic electron transfer mechanisms. Regeneration of the oxidized sensitizer by iodide is enhanced through halogen bonding, orbital pathways, and ion pairing. A substantial ~10 MV cm –1 electric field is created by electron injection into TiO 2 nanocrystallites that induces ion migration, reports on the sensitizer dipole orientation, and (in some cases) reorients or flips the sensitizer. Dye-sensitized conductive oxides also promote long-lived charge separation with bias dependent kinetics that provide insights into the reorganization energies associated with electron and proton-coupled electron transfer in the electric double layer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Dynamic Evolution of Palladium Single Atoms on Anatase Titania Support Determines the Reverse Water–Gas Shift Activity

Research interest in single-atom catalysts (SACs) has been continuously rising. However, the lack of understanding of the dynamic behaviors of SACs during applications hinder catalyst development and mechanistic understanding. Herein, we report on the evolution of active sites over Pd/TiO 2 -anatase SAC (Pd 1 /TiO 2 ) in the reverse water-gas shift (rWGS) reaction. Combining kinetics, in-situ characterization, and theory, we show that at T ≥ 350 °C, the reduction of TiO 2 by H 2 alters the coordination environment of Pd, creating Pd sites with partially cleaved Pd-O interfacial bonds and a unique electronic structure that exhibit high intrinsic rWGS activity through the carboxyl pathway. The activation by H 2 is accompanied by the partial sintering of single Pd atoms (Pd 1 ) into disordered, flat, ~1 nm diameter clusters (Pd n ). The highly active Pd sites in the new coordination environment under H 2 are eliminated by oxidation, which, when performed at high temperature, also re-disperses Pd n and facilitates the reduction of TiO 2 . In contrast, Pd 1 sinters into crystalline, ~5 nm particles (Pd NP ) during CO treatment, deactivating Pd 1 /TiO 2 . During the rWGS reaction, the two Pd evolution pathways co-exist. The activation by H 2 dominates, leading to the increasing rate with time-on-stream, and steady-state Pd active sites similar with the ones formed under H 2 . Finally, this work demonstrates how the coordination environment and nuclearity of metal sites on a SAC evolve during catalysis and pre-treatments, and how their activity is modulated by these behaviors. These insights on SAC dynamics and structure-function relationship are valuable to mechanistic understanding and catalyst design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Electrochemically Determined and Structurally Justified Thermochemistry of H atom Transfer on Ti-Oxo Nodes of the Colloidal Metal–Organic Framework Ti-MIL-125

Titanium dioxide (TiO 2 ) has long been employed as (photo)electrodes for reactions relevant to energy storage and renewable energy synthesis. Proton-coupled electron transfer (PCET) reactions with equimolar amounts of protons and electrons at the TiO 2 surface or within the bulk structure lie at the center of these reactions. Because a proton and an electron are thermochemically equivalent to an H-atom, these reactions are essentially H-atom transfer reactions. Thermodynamics of H-atom transfer has a complex dependence on the synthetic protocol and chemical history of the electrode, the reaction medium, and many others; together, these complications preclude the understanding of the H-atom transfer thermochemistry with atomic-level structural knowledge. Herein, we report our success in employing open-circuit potential (E OCP ) measurements to quantitatively determine the H-atom transfer thermochemistry at structurally well-defined Ti-oxo clusters within a colloidally stabilized metal–organic framework (MOFs), Ti-MIL-125. The free energy to transfer H-atom, Ti 3+ O–H bond dissociation free energy (BDFE), was measured to be 68(2) kcal mol -1 . To the best of our understanding, this is the first report on using E OCP measurements to quantify thermochemistry on any MOFs. The proton topology, the structural change upon the redox reaction, and BDFE values were further quantitatively corroborated using computational simulations. Furthermore, comparisons of the E OCP -derived BDFEs of Ti-MIL-125 to similar parameters in the literature suggest that E OCP should be the preferred method for quantitatively accurate BDFE calculations. Here, the reported success in employing E OCP for nanosized Ti- MIL-125 should lay the ground for thermochemical measurements of other colloidal systems, which are otherwise challenging. Implications of these measurements on Ti-MIL-125 as an H-atom acceptor in chemical reactions and comparisons with other MOFs/metal oxides are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

The Dynamical Role of Optical Phonons and Sublattice Screening in a Solid-State Ion Conductor

Solid-state electrolytes (SSEs) require ionic conductivities that are competitive with liquid electrolytes to realize applications in all-solid-state batteries. Although candidate SSEs have been discovered, the underlying mechanisms enabling superionic conduction (>1 mS cm –1 ) remain elusive. In particular, the role of ultrafast lattice dynamics in mediating ion migration, which involves couplings between ions, phonons, and electrons, is rarely explored experimentally at their corresponding time scales. To investigate the complex contributions of coupled lattice dynamics on ion migration, we modulate the charge density occupations within the crystal framework and then measure the time-resolved change in impedance on picosecond time scales for a candidate SSE, Li 0.5 La 0.5 TiO 3 (LLTO). Upon perturbation, we observe enhanced ion migration at ultrafast time scales. The respective transients match the time scales of optical and acoustic phonon vibrations, suggesting their involvement in ion migration. We further computationally evaluate the effect of a charge transfer from the O 2p to the Ti 3d band on the electronic and physical structure of LLTO. We hypothesize that the charge-transfer excitation distorts the TiO 6 polyhedra by altering the local charge density occupancy of the hopping site at the migration pathway saddle point, thereby causing a reduction in the migration barrier for the Li + hop. We rule out the contribution of photogenerated electron carriers and laser heating. Overall, our investigation introduces a new spectroscopic tool to probe fundamental ion hopping mechanisms transiently at ultrafast time scales, which has previously only been achieved in a time-averaged manner or solely via computational methods.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Proton, Electron, and Hydrogen-Atom Transfer Thermodynamics of the Metal–Organic Framework, Ti-MIL-125, Are Intrinsically Correlated to the Structural Disorder

Interfacial charge transfer reactions involving protons and/or electrons are fundamental to heterogeneous catalysis and many other reactions relevant to energy, chemical, and biological sectors. Metal–organic frameworks (MOFs) with redox-active metal-oxo nodes have emerged as candidate materials to examine these reactions with near-atomic-level precision, given their crystalline nature. Here, we employed a colloidally stable, Ti-based MOF, Ti-MIL-125, with different crystal sizes to examine catalytically relevant charge transfer thermodynamics. The Ti 8 (μ 2 -O) 8 (μ 2 -OH) 4 nodes structurally mimic TiO 2 , which has shown some PCET reactivity toward reactions of H 2 , O 2 , and others. In this report, we have demonstrated that a change in crystal size induces different amounts of structural disorder to the Ti-oxo node, further changing the thermodynamics of proton/electron/hydrogen-atom transfer reactions. Using electrochemical open-circuit potential (E OCP ) measurements, we have determined that all crystallites undergo a 1H + /1e – redox reaction, which, given the stoichiometry, can be considered as a net H atom transfer (HAT) reaction. The thermodynamics of this HAT reaction, the Ti 3+ O–H bond dissociation free energy (BDFE), was dependent on the crystal size of the MOF, as the decrease in crystal size induced more structural disorder. Our computational calculations have indicated that this difference in BDFE is due to a local change in the geometry of Ti cations, rather than the commonly invoked defects, such as the “missing-linker” defect sites. Individual proton/electron transfer (PT/ET) thermodynamics were also highly dependent on the crystal sizes. These were probed using pK a or band gaps (E g ), respectively. These findings suggest that, particularly when MOFs are nanosized with a large amount of structural disorder, they should no longer be considered “true” single-site catalysts; this is an implicit, but widespread assumption within the MOF-based catalysis field. Implications of these findings will be contrasted with structurally similar metal oxides like TiO 2 and other redox-active MOFs.

Bond dissociation free energy↗
DOE OSTI2026

A Quantitative Examination of Catalyst Component Impacts on Hydrogen Adsorption and Spillover

Hydrogen spillover is a widely recognized but poorly understood surface phenomenon. We coupled volumetric chemisorption with Fourier transform infrared spectroscopy, thermogravimetric analysis, and acid–base titrations to quantify the roles of metal (Pt, Au) and support chemistry (anatase, rutile, P25 titania) on spillover. We show that metal identity has little to no impact on the amount of spillover hydrogen. Spillover pressure dependence is essentially the same on Au/TiO 2 and Pt/TiO 2 , indicating H 2 adsorption is equilibrated across both the metal and support. Conversely, spillover is highly sensitive to support surface chemistry, as rutile TiO 2 stabilizes ∼5× more surface hydrogen than anatase TiO 2 . This change is due to a combination of factors, including the rutile surface’s higher proton affinity, stabilized surface electronic states, and larger surface entropy. This work highlights the utility of Au/MO x catalysts as control materials for spillover, as they enable quantitative evaluation of H 2 adsorption on active metals and spillover onto the support.

Adsorption↗
DOE OSTI2020

Tropical Indian Ocean Mediates ENSO Influence Over Central Southwest Asia During the Wet Season

El Niño–Southern Oscillation (ENSO) modulates wet season (November–April) precipitation over Central Southwest Asia (CSWA), however, intraseasonal characteristics of its influence are largely unknown, which can be important for its subseasonal to seasonal hydroclimate predictability. Here we show that the ENSO-CSWA teleconnection varies intraseasonally and is a combination of direct and indirect positive influences. The direct influence is through a Rossby wave-like pattern in the tail months. The indirect influence is through an atmospheric dipole of diabatic heating anomalies in the tropical Indian Ocean (TIO) as a result of ENSO-forced response, which also generates a Rossby wave-like forcing and persists throughout the wet season. ENSO exerts its strongest influence when both direct and indirect modes are in phase, while the relationship breaks down when the two modes are out of phase. The atmospheric teleconnection through the atmospheric diabatic heating anomalies in the TIO is reproducible in numerical simulations.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Electronic modulation of metal-support interactions improves polypropylene hydrogenolysis over ruthenium catalysts

Abstract Ruthenium (Ru) is the one of the most promising catalysts for polyolefin hydrogenolysis. Its performance varies widely with the support, but the reasons remain unknown. Here, we introduce a simple synthetic strategy (using ammonia as a modulator) to tune metal-support interactions and apply it to Ru deposited on titania (TiO 2 ). We demonstrate that combining deuterium nuclear magnetic resonance spectroscopy with temperature variation and density functional theory can reveal the complex nature, binding strength, and H amount. H 2 activation occurs heterolytically, leading to a hydride on Ru, an H + on the nearest oxygen, and a partially positively charged Ru. This leads to partial reduction of TiO 2 and high coverages of H for spillover, showcasing a threefold increase in hydrogenolysis rates. This result points to the key role of the surface hydrogen coverage in improving hydrogenolysis catalyst performance.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Substantial lifetime enhancement for Si-based photoanodes enabled by amorphous TiO2 coating with improved stoichiometry

Abstract Amorphous titanium dioxide (TiO 2 ) film coating by atomic layer deposition (ALD) is a promising strategy to extend the photoelectrode lifetime to meet the industrial standard for solar fuel generation. To realize this promise, the essential structure-property relationship that dictates the protection lifetime needs to be uncovered. In this work, we reveal that in addition to the imbedded crystalline phase, the presence of residual chlorine (Cl) ligands is detrimental to the silicon (Si) photoanode lifetime. We further demonstrate that post-ALD in-situ water treatment can effectively decouple the ALD reaction completeness from crystallization. The as-processed TiO 2 film has a much lower residual Cl concentration and thus an improved film stoichiometry, while its uniform amorphous phase is well preserved. As a result, the protected Si photoanode exhibits a substantially improved lifetime to ~600 h at a photocurrent density of more than 30 mA/cm 2 . This study demonstrates a significant advancement toward sustainable hydrogen generation.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Mending cracks atom-by-atom in rutile TiO2 with electron beam radiolysis

Abstract Rich electron-matter interactions fundamentally enable electron probe studies of materials such as scanning transmission electron microscopy (STEM). Inelastic interactions often result in structural modifications of the material, ultimately limiting the quality of electron probe measurements. However, atomistic mechanisms of inelastic-scattering-driven transformations are difficult to characterize. Here, we report direct visualization of radiolysis-driven restructuring of rutile TiO 2 under electron beam irradiation. Using annular dark field imaging and electron energy-loss spectroscopy signals, STEM probes revealed the progressive filling of atomically sharp nanometer-wide cracks with striking atomic resolution detail. STEM probes of varying beam energy and precisely controlled electron dose were found to constructively restructure rutile TiO 2 according to a quantified radiolytic mechanism. Based on direct experimental observation, a “two-step rolling” model of mobile octahedral building blocks enabling radiolysis-driven atomic migration is introduced. Such controlled electron beam-induced radiolytic restructuring can be used to engineer novel nanostructures atom-by-atom.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Suppressing CO x in oxidative dehydrogenation of propane with dual-atom catalysts

Oxidative dehydrogenation of propane (ODHP) is a promising route for propylene production, but achieving high selectivity towards propylene while minimizing CO x byproducts remains a significant challenge for conventional metal oxide catalysts. Here we propose a solution to this challenge by employing atomically dispersed dual-atom catalysts (M 1 M' 1 -TiO 2 DACs). Ni 1 Fe 1 -TiO 2 DACs exhibit an ultralow CO x selectivity of 5.2% at a high propane conversion of 46.1% and 520 °C, with stable performance for over 1000 hours. Mechanistic investigations reveal that these catalysts operate via a cooperative Langmuir-Hinshelwood mechanism, distinct from the Mars-van Krevelen mechanism typical of metal oxides. This cooperative pathway facilitates efficient conversion of propane and oxygen into propylene at the dual-atom interface. The superior selectivity arises from facile olefin desorption from the dual-atom sites and suppressed formation of electrophilic oxygen species, which are preferentially adsorbed on Fe 1 sites rather than oxygen vacancies. This work highlights the potential of dual-atom catalysts for highly selective ODHP and provides insights into their unique catalytic mechanism.

02 PETROLEUM↗
DOE OSTI2021

Comparison of short-range order in irradiated dysprosium titanates

Abstract The structural response of Dy 2 TiO 5 oxide under swift heavy ion irradiation (2.2 GeV Au ions) was studied over a range of structural length scales utilizing neutron total scattering experiments. Refinement of diffraction data confirms that the long-range orthorhombic structure is susceptible to ion beam-induced amorphization with limited crystalline fraction remaining after irradiation to 8 × 10 12 ions/cm 2 . In contrast, the local atomic arrangement, examined through pair distribution function analysis, shows only subtle changes after irradiation and is still described best by the original orthorhombic structural model. A comparison to Dy 2 Ti 2 O 7 pyrochlore oxide under the same irradiation conditions reveals a different behavior: while the dysprosium titanate pyrochlore is more radiation resistant over the long-range with smaller degree of amorphization as compared to Dy 2 TiO 5 , the former involves more local atomic rearrangements, best described by a pyrochlore-to-weberite-type transformation. These results highlight the importance of short-range and medium-range order analysis for a comprehensive description of radiation behavior.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

High-throughput dataset of impurity adsorption on common catalysts in biomass upgrading applications

Abstract An extensive dataset consisting of adsorption energies of pernicious impurities present in biomass upgrading processes on common catalysts and support materials has been generated. This work aims to inform catalyst and process development for the conversion of biomass-derived feedstocks to fuels and chemicals. A high-throughput workflow was developed to execute density functional theory calculations for a diverse set of atomic (Al, B, Ca, Cl, Fe, K, Mg, Mn, N, Na, P, S, Si, Zn) and molecular (COS, H 2 S, HCl, HCN, K 2 O, KCl, NH 3 ) species on 35 unique surfaces for transition-metal (Ag, Au, Co, Cu, Fe, Ir, Ni, Pd, Pt, Re, Rh, Ru) and metal-oxide (Al 2 O 3 , MgO, anatase-TiO 2 , rutile-TiO 2 , ZnO, ZrO 2 ) catalysts and supports. Approximately 3,000 unique adsorption geometries and corresponding adsorption energies were obtained.

09 BIOMASS FUELS↗