SEARCH · Engineering Papers

Results for “Thermal Protection System (TPS)”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

All sources NASA NTRS DOE OSTI

NASA NTRS1983

Moisture absorption characteristics of the Orbiter thermal protection system and methods used to prevent water ingestion

The Space Shuttle Orbiter's silica tile Thermal Protection System (TPS) is beset by the moisture absorption problems inherently associated with low density, highly porous insulation systems. Attention is presently given to the comparative success of methods for the minimization and/or prevention of water ingestion by the TPS tiles, covering the development of water-repellent agents and their tile application techniques, flight test program results, and materials improvements. The use of external films for rewaterproofing of the TPS tiles after each mission have demonstrated marginal to unacceptable performance. By contrast, a tile interior waterproofing agent has shown promise.

Schomburg, C.↗

NASA NTRS1984

Aerothermodynamic environment and thermal protection for a Titan aerocapture vehicle

This paper presents thermal protection system (TPS) requirements for a potential Titan aerocapture vehicle. Shock-layer solutions are obtained for a nominal trajectory through the current Titan model atmosphere. Fully laminar and fully turbulent solutions are presented along the blunted fore-cone in the windward symmetry plane of a bent-biconic vehicle. Using these solutions to define the aerothermodynamic environment, transient material-response solutions are obtained for a Galileo-type TPS with a carbon-phenolic ablator heat shield. Shock-layer results indicate that turbulent flow is the more realistic flow condition. They also show that the lengthy aerocapture heating pulse is dominated by convective heating. The TPS results show that the required insulation thickness is uniformly about 4 cm along the fore-cone because of the long heat-soak period. The total heat-shield thickness is 6.4 cm at the stagnation point, and 4.7 cm near the end of the fore-cone. These TPS requirements are greater than those presented in a previous Titan aerocapture study.

Green, M. J.↗

NASA NTRS1984

Thermal response of Space Shuttle wing during reentry heating

A structural performance and resizing (SPAR) finite element thermal analysis computer program was used in the heat transfer analysis of the Space Shuttle Orbiter that was subjected to reentry aerodynamic heatings. One wing segment of the right wing (WS 240) and the whole left wing were selected for the thermal analysis. Results showed that the predicted thermal protection system (TPS) temperatures were in good agreement with the space transportation system, trajectory 5 (STS-5) flight-measured temperatures. In addition, calculated aluminum structural temperatures were in fairly good agreement with flight data up to the point of touchdown. Results also showed that the internal free convection has a considerable effect on the change of structural temperatures after touchdown.

Gong, L.↗

NASA NTRS1984

Low lift-to-drag aero-assisted orbit transfer vehicles

The results of systems analysis conducted on low life drag ratio (L/D) aero-assisted orbit transfer vehicle (AOTV's) are presented. The objectives for this class of vehicle and formulate technology development plans and funding levels to bring the required technologies to readiness levels, as well as develop a credible decision data base encompassing the entire range of low L/D concepts for use in future NASA Aeroassist Orbit Transfer Vehicles studies. Each candidate low L/D concept, the aerobrake, the lifting brake, and the aeromaneuvering concept could be made to work with technologies achievable by the early 1990's. All concepts require flexible structure with flexible thermal protection system (TPS) to be successfully integrated into the shuttle orbiter for launch, all required improvements in guidance and control to fly the dispersed atmospheres at high altitude, and all concepts had potential to evolve from ground-based to space-based operations.

Andrews, D. G.↗

NASA NTRS1985

Impacts of Space Shuttle thermal protection system tile on F-15 aircraft vertical tile

Impacts of the space shuttle thermal protection system (TPS) tile on the leading edge and the side of the vertical tail of the F-15 aircraft were analyzed under different TPS tile orientations. The TPS tile-breaking tests were conducted to simulate the TPS tile impacts. It was found that the predicted tile impact forces compare fairly well with the tile-breaking forces, and the impact forces exerted on the F-15 aircraft vertical tail were relatively low because a very small fraction of the tile kinetic energy was dissipated in the impact, penetration, and fracture of the tile. It was also found that the oblique impact of the tile on the side of the F-15 aircraft vertical tail was unlikely to dent the tail surface.

Ko, W. L.↗

NASA NTRS1985

Results of aeroheating DFI and ET design-data test on a 0.0175-scale model 60-OTS conducted in the Von Karman Gas Dynamics Facility (VKF) 40" supersonic and the 50" hypersonic wind tunnels A and C

The 0.0175-scale thin-skin thermocouple Model 60-OTS was tested in the von Karman Gas Facility 40-inch continuous flow supersonic tunnel A and the VKF Tunnel C. Testing was conducted at Mach numbers 2.25 to 4.0, and Reynolds numbers from 0.4 x 10 to the 6th power/ft to 6.6 x 10 to the 6th power/ft. Angle of attack range was from -5.0 to +5.0 degrees, and angle of sideslip range was from -6 to +6 degrees. The primary objective of this test was to provide a valid base for the external tank (ET) and solid rocket booster (SRB) heating prediction methodology for ascent flight by taking heating data at Development Flight Instrumentation (DFI) locations for flight conditions simulating STS-1 through -4. A second objective was to obtain additional aeroheating data to support potential reduction of the thermal protection system (TPS) on the ET. The third phase of the test was funded and conducted by NASA/MSFC for the purpose of establishing confidence in the data base from the lower temperature tunnel A.

Marroquin, J.↗

NASA NTRS1985

Definition of an entry research vehicle

Within the last year, there has been a growing interest in technology which would support the development of vehicles which can maneuver in the atmosphere while returning from orbit and vehicles which can fly in the atmosphere at hypersonic speeds for sustained periods of time. This rebirth of interest in hypersonics is partly a result of a developing awareness of the potential benefits which can be derived from vehicles with capability to operate between the limits of existing aircraft and spacecraft. Examples of the types of maneuvers which are projected for this new class of vehicles are presented. Challenges provided by the considered maneuvers are summarized, taking into account a synergetic or atmospheric plane change. The plane change maneuver will require a Thermal Protection System (TPS). Attention is given to the definition of a Shuttle launched entry research vehicle experiment. Details regarding the synergetic plane change are considered along with the maneuvering entry, vehicle heating, and experiments and instrumentation.

Freeman, D. C.↗

NASA NTRS1985

Effect of processing treatments on strength of silica thread for quilted ceramic insulation on Space Shuttle

The effects of chemical, mechanical, and thermal processing treatments on the preflight strength properties of a silica sewing thread used to fabricate an external flexible Thermal Protection System (TPS) for the Space Shuttle vehicle are discussed. Below 540 C, loss of strength was observed for all treatments studied, but above conditioning temperatures of 540 C little change in strength properties was measured, indicating no appreciable mechanical damage to the yarn as a consequence of these processing treatments.

Sawko, P. M.↗

NASA NTRS1985

Origin and development of ablator for Space Shuttle external tank

The Space Shuttle External Tank (ET) represents the largest element of the Space Shuttle transportation system. The ET is the fuel tank which contains cryogenic propellants, including liquid oxygen and liquid hydrogen. The task of providing a suitable Thermal Protection System (TPS) which is mass producible for the ET represented a challenge for the aerospace industry. The difficulties were compounded by stringent insulation and ablation requirements for the materials to maintain their integrity over a wide range of operating temperatures during prelaunch and ascent. Attention is given to the configuration of the Space Shuttle system, the configuration of the external tank, the initial ET TPS concept, TPS materials and processes concepts, design rationale, TPS materials structural considerations, material and processes development, development tests, material/process verification, and flight results.

Ronquillo, L.↗

NASA NTRS1985

Acoustic emission monitoring of Space Shuttle tiles

Late in the development of the Space Shuttle thermal protection system (TPS), a major problem was encountered with the attachment of the tiles to the spacecraft's exterior skin. To insure an adequate margin, each tile had to be proof tested. The risk of damaging a tile during proof test was quite high. For this reason, an acoustic emission system was developed and used in conjunction with the proof test to insure no significant damage occurred.

Castner, W. L.↗

NASA NTRS1986

Heatshield design for transatmospheric vehicles

A variety of future spacecraft will be operating above the sensible earth atmosphere, but will be dipping into the atmosphere to utilize aerodynamic forces in conjunction with propulsion for its major maneuvers such as plane change. During this maneuver, the vehicle surface will experience high aerodynamic heating rates. Because these heating rates can exceed those experienced by the Shuttle, advanced thermal protection systems (TPS) must be used. This paper compares the performance of four TPS concepts operating in the same heating environment. All of them can be considered as derivatives from the development process of the TPS for the Shuttle; one has a new feature added. The results show that all of the systems require about the same weight of heatshield at high heat loads. The major difference in the weight stems from the methods of attachment to the spacecraft.

Pitts, W. C.↗

NASA NTRS1986

Aerothermal tests of spherical dome protuberances on a flat plate at a Mach number of 6.5

Aerothermal tests were conducted in the Langley 8-Foot High-Temperature Tunnel at a Mach number of 6.5 on a series of spherical dome protuberances mounted on a flat-plate test apparatus. Detailed surface pressure and heating-rate distributions were obtained for various dome heights and diameters submerged in both laminar and turbulent boundary layers including a baseline geometric condition representing a thermally bowed metallic thermal protection system (TPS) tile. The present results indicated that the surface pressures on the domes were increased on the windward surface and reduced on the leeward surface as predicted by linearized small-perturbation theory, and the distributions were only moderately affected by boundary-layer variations. Surface heating rates for turbulent flow increased on the windward surface and decreased on the leeward surface similar to the pressure; but for laminar boundary layers, the heating rates remained high on the leeward surface, probably due to local transition. Transitional flow effects cause heat load augmentation to increase by 30 percent for the maximum dome height in a laminar boundary layer. However, the corresponding augmentation for a dome with a height of 0.1 in. and a diameter of 14 in. representative of a bowed TPS tile was 14 percent or less for either a laminar or turbulent boundary layer.

Glass, C. E.↗

NASA NTRS1987

Aerothermal evaluation of a spherically blunted body with a trapezoidal cross section in the Langley 8-foot high-temperature tunnel

A model to be used in the flow studies and curved Thermal Protection System (TPS) evaluations was tested in the Langley 8 Foot High-Temperature Tunnel at a nominal Mach number of 6.8. The purpose of the study was to define the surface pressure and heating rates at high angles of attack (in support of curved metallic TPS studies) and to determine the conditions for which the model would be suitable as a test bed for aerothermal load studies. The present study was conducted at a nominal total temperature of 2400 and 3300 R, dynamic pressures from 2.3 to 10.9 psia, and free-stream Reynolds numbers from 4000,000 to 1,700,000/ft. The measurements consisted primarily of surface pressure and cold-wall (530 R) heating rates. Qualitative comparisons between predictions and data show that for this configuration, aerothermal tests should be limited to angles of attack between 10 and -10 degrees. Outside this range, the effects of free-stream flow nonuniformity appear in the data, as a result of the long length of the model. However, for TPS testing, this is not a concern and tests can be performed at angles of attack ranging from 20 to -20 degrees. Laminar and naturally turbulent boundary layers are available over limited ranges of conditions.

Albertson, Cindy W.↗

NASA NTRS1985

Thermal fatigue tests of a radiative heat shield panel for a hypersonic transport

A pair of corrugation stiffened, beaded skin Rene 41 heat shield panels were exposed to 20,000 thermal cycles between room temperature and 1450 F to evaluate the thermal fatigue response of Rene 41 metallic heat shields for hypersonic cruise aircraft applications. At the conclusion of the tests, the panels retained substantial structural integrity; however, there were cracks and excessive wear in the vicinity of fastener holes and there was an 80-percent loss in ductility of the skin. Shrinkage of the panel which caused the cracks and wear must be considered in design of panels for Thermal Protection Systems (TPS) applications.

Webb, Granville L.↗

NASA NTRS1986

The use of computer graphic simulation in the development of robotic systems

This paper describes the use of computer graphic simulation techniques to resolve critical design and operational issues for robotic systems. Use of this technology will result in greatly improved systems and reduced development costs. The major design issues in developing effective robotic systems are discussed and the use of ROBOSIM, a NASA developed simulation tool, to address these issues is presented. Three representative simulation case studies are reviewed: off-line programming of the robotic welding development cell for the Space Shuttle Main Engine (SSME); the integration of a sensor to control the robot used for removing the Thermal Protection System (TPS) from the Solid Rocket Booster (SRB); and the development of a teleoperator/robot mechanism for the Orbital Maneuvering Vehicle (OMV).

Fernandez, K.↗

NASA NTRS1987

Effects of forced and free convections on structural temperatures of Space Shuttle Orbiter during reentry flight

Structural performance and resizing (SPAR) finite-element thermal analysis computer program was used in the heat transfer analysis of the Space Shuttle Orbiter wing subjected to reentry aerodynamic heating. With sufficient external forced convective cooling near the end of the heating cycle, the calculated surface temperatures of the thermal protection system (TPS) agree favorably with the flight data for the entire flight profile. However, the effects of this external forced convective cooling on the structural temperatures were found to be negligible. Both free convection and forced convection elements were introduced to model the internal convection effect of the cool air entering the Shuttle interior. The introduction of the internal free convection effect decreased the calculated wing lower skin temperatures by 20 F at most, 1200 sec after touchdown. If the internal convection is treated as forced convection, the calculated wing lower skin temperatures after touchdown can be reduced to match the flight-measured data very closely. By reducing the TPS thicknesses to certain effective thickness to account for the TPs gap heating, the calculated wing lower skin temperatures prior to touchdown can be raised to agree with the flight data perfectly.

Ko, William L.↗

NASA NTRS1987

Spectroscopic investigations and measurements of certain ARC jet parameters

The NASA/JSC Atmospheric Reentry Materials and Structures Evaluation Facility (ARMSEF) was intensively and extensively involved in ground testing of spacecraft materials and thermal protection systems (TPS) in simulated reentry conditions. Ground experiments on surface catalytic efficiency of such TPS requires a knowledge of the flow system in the arc jet. In the work described, spectroscopic diagnostic techniques are used to determine the free stream constituents. Specifically, the emission spectrum of the free stream constituents was obtained and the species therein identified. A laser system was added on, which will give the added capacity of studying the arc jet flow using Laser Raman Spectroscopy (LRS). The LRS technique will complement information obtained from the emission spectra. A short list of further work that can be done in the area of spectroscopic investigations on the arc jet is mentioned.

Murty, Vedula S.↗

NASA NTRS1987

The use of computer graphic simulation in the development of robotic systems

Fernandez, Ken↗