Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Task, C++”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Task 1 Steam Oxidation (NETL-US)

A first high pressure test was completed: 293 hr at 267 bar and 670{degrees}C; A parallel 1 bar test was done for comparison; Mass gains were higher for all alloys at 267 bar than at 1 bar; Longer term exposures, over a range of temperatures and pressures, are planned to provide information as to the commercial implications of pressure effects; The planned tests are at a higher combination of temperatures and pressures than in the existing literature. A comparison was made with longer-term literature data: The short term exposures are largely consistent with the longer-term corrosion literature; Ferritic steels--no consistent pressure effect; Austenitic steels--fine grain alloys less able to maintain protective chromia scale as pressure increases; Ni-base alloys--more mass gains above 105 bar than below. Not based on many data points.

36 MATERIALS SCIENCE↗

An alternative explanation of the change in T-dependence of the effective Debye-Waller factor at T{sub c} or T{sub B}

The cusp-like temperature dependence of the Debye-Waller factor or non-ergodicity parameter f{sub Q}(T) at some temperature T{sub c} above T{sub g} found by experiments in several fragile glassformers has been considered as critical evidence for validity of the ideal Mode Coupling Theory (MCT). A comprehensive review of experimental data of f{sub Q}(T) and beyond brings out various problems of the MCT predictions. For example, the molten salt, 0.4Ca(NO{sub 3}){sub 2}-0.6KNO{sub 3} (CKN), was the first glassformer measured by neutron scattering to verify the cusp-like behavior of f{sub Q}(T) at T{sub c} predicted by ideal MCT. While the fits of the other scaling laws of MCT to viscosity, light scattering, and dielectric relaxation data all give T{sub c} in the range from 368 to 375 K, there is no evidence of cusp-like behavior of f{sub Q}(T) at T{sub c} from more accurate neutron scattering data obtained later on by Mezei and Russina [J. Phys.: Condens. Matter 11, A341 (1999)] at temperatures below 400 K. In several molecular glass-formers, experiments have found at temperatures below T{sub c} that [1−f{sub Q}(T)] is manifested as nearly constant loss (NCL) in the frequency dependent susceptibility. The NCL persists down to below T{sub g} and is not predicted by the ideal MCT. No clear evidence of the change of T-dependence of f{sub Q}(T) at any T{sub c} was found in intermediate and strong glassformers, although ideal MCT does not distinguish fragile and strong glassformers in predicting the critical behavior of f{sub Q}(T) a priori. Experiments found f{sub Q}(T) changes T-dependence not only at T{sub c} but also at the glass transition temperature T{sub g}. The changes of T-dependence of f{sub Q}(T) at T{sub c} and T{sub g} are accompanied by corresponding changes of dynamic variables and thermodynamic quantities at T{sub B} ≈ T{sub c} and at T{sub g}. The dynamic variables include the relaxation time τ{sub α}(T), the non-exponentiality parameter n(T), and the generalized fragility m(T) of the structural α-relaxation. The thermodynamic quantities are the free volume deduced from positron annihilation spectroscopy, and the configurational entropy obtained from adiabatic calorimetry measurements. These changes of dynamic variables and thermodynamic quantities in temperature dependence at T{sub B} ≈ T{sub c} occur concurrently with the change of f{sub Q}(T) and suggest the effects are related, and have to be explained altogether. Since this task cannot be carried out by the ideal MCT, we have provided a different interpretation of f{sub Q}(T) and an alternative explanation of the change in its T-dependence of f{sub Q}(T) at T{sub B} ≈ T{sub c} as well as the other dynamic variables. We show f{sub Q}(T) originates from the dissipation of the molecules while caged by the anharmonic intermolecular potential, and manifested as the NCL at lower temperatures. The cusp-like change of T-dependence of f{sub Q}(T) at T{sub c} originates from the corresponding change of free volume and configurational entropy at T{sub B} ≈ T{sub c}, which also explains the simultaneous changes of the T-dependencies of the other dynamic variables. The alternative explanation is able to resolve the conundrum in CKN because T{sub B} is ≥400 K, and hence the change of T-dependence of f{sub Q}(T) at T{sub c} ≈ T{sub B} was not observed in data taken at temperatures lower than 400 K by Mezei and Russina. The alternative explanation also can rationalize the difference between fragile and non-fragile glassformers in the strength of the observed changes of f{sub Q}(T) at T{sub c} and T{sub g} as well as the other dynamic quantities at T{sub B} ≈ T{sub c} and T{sub g}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DECOVALEX-2019 (Task B Final Report)

The DECOVALEX Project is an on-going international research collaboration, established in 1992, to advance the understanding and modeling of coupled Thermal (T), Hydrological (H), Mechanical (M) and Chemical (C) processes in geological in geological systems. DECOVALEX was initially motivated by the recognition that prediction of these coupled effects is an essential part of the performance and safety assessment of geologic disposal systems for radioactive waste and spent nuclear fuel. This document is the final report of Task B which was proposed and coordinated by the Swiss Federal Nuclear Safety Inspectorate (ENSI) and Lawrence Berkeley National Laboratory (LBNL), presenting the technical definitions of the problems studied, approaches applied, achievements made and outstanding issues for future research. Task B focused mainly on modelling of fault activation experiments (FS experiment) recently performed at the Mont Terri underground research laboratory, Switzerland. The FS experiment explores the coupling between fault reactivation in a clay host rock and the potential-enhanced fluid displacement through a previously low-permeability formation. Based on this experiment, the DECOVALEX-2019 Task B addresses how the change in permeability induced by the fault activation and the resulting fluid flow within the fault can be simulated including the dependence on its mechanical behavior. This will support the understanding of the processes during fault activation itself and it can help to determine consequences for contaminant transport due to potentially created permeable flow paths in otherwise low permeability argillaceous rocks.

58 GEOSCIENCES↗

Subtask 2.8 - Control of Trace Elements in Gasification Systems

Detailed investigations were carried out to investigate the removal of mercury using a variety of substrates at elevated temperature under reducing conditions. Sorbents tested mainly comprised 6A, 7A, 1B, 2B, and metals from the periodic table. The new high-surface halogen-treated carbon sorbents performed exceptionally well on the bench scale at relatively high temperatures (400 C). The new sorbents could be incorporated into a gas cleanup technology for fuel gas, where the gas is cooled to medium temperatures. Other work in this task focused on halogen-containing sorbents prepared on a carbon support. Similar sorbents had been previously found to be superior for mercury in flue gas. All granular sorbents were conducted in fixed beds heated at 350 and 400 C with 10 vol% hydrogen in a nitrogen stream containing 34.8 {mu}g/m{sup 3} of Hg{sup 0}.

08 HYDROGEN↗

ECP Milestone Deliverable Memo 2.3.1.04.15

The DARMA many-task framework provides asynchronous communication and load balancing functionality. This functionality is embedded in standard , modern C++ through the use of the template wrapper classes similar to futures. DARMA codes previously could not interoperate with MPI. A new C++ interface and extended semantics now allow quiescence of DARMA kernels and transfer of data ownership back into MPI, allowing 1) isolated DARMA kernels to be inserted in a larger MPI code or 2) reuse of MPI libraries like solvers within a DARMA application.

97 MATHEMATICS AND COMPUTING↗

ECP Milestone Memo for 2.3.1.04.14

The DARMA many-task framework provides asynchronous communication and load balancing functionality. This functionality is embedded in standard, modern C++ through the use of the template wrapper classes similar to futures. DARMA previously functioned as a single, large repository. This simplified building and installation, but hindered agile development as individual components could not be easily updated or reused in other projects. DARMA components can now be developed independently and reused in other ECP projects. Through Spack and modern CMake, a complete DARMA package can be easily configured and installed with automatic dependency management for each of the configuration options.

97 MATHEMATICS AND COMPUTING↗

Flight qualification test results for violet cells

The violet solar cell has been submitted to a flight qualification program. The tasks included in this program were: to define the violet cell's electrical output from -100 C to +100 C; to determine the violet cell's degradation under 2 MeV, 1 MeV and .3 MeV proton irradiation, under a high humidity environment and under ultraviolet light; to thermal cycle two similar modules of violet cells; to flight qualify a full size violet cell panel for the IMP-J flight; and to obtain a primary balloon-flown standard of the violet cell type. The results of these tests demonstrate that the violet cell is fully qualified for space flight use with no further development work. The tests show that the violet cell offers a power increase of at least twenty-one per cent over presently available commercial cells.

Gaddy, E. M.↗

Brayton Power Conversion System Study to Advance Technology Readiness for Nuclear Electric Propulsion

Recently, there has been significant interest within the aerospace community to develop space based nuclear power conversion technologies especially for exploring the outer planets of our solar system where the solar energy density is very low. To investigate these technologies NASA awarded several contracts under Project Prometheus, the Nuclear Systems Program. The studies described in this paper were performed under one of those contracts, which was to investigate the use of a nuclear power conversion system based on the closed Brayton cycle (CBC).The investigation performed included BPCS (Brayton Power Conversion System) trade studies to minimize system weight and radiator area and advance the state of the art of BPCS technology. The primary requirements for studies were a power level of 100 kWe (to the PPU), a low overall power system mass and a lifetime of 15 years (10 years full power). For the radiation environment, the system was to be capable of operation in the generic space environment and withstand the extreme environments surrounding Jupiter. The studies defined a BPCS design traceable to NEP (Nuclear Electric Propulsion) requirements and suitable for future missions with a sound technology plan for technology readiness level (TRL) advancement identified. The studies assumed a turbine inlet temperature approx. 100 C above the current the state of the art capabilities with materials issues and related development tasks identified. Analyses and evaluations of six different HRS (heat rejection system) designs and three primary power management and distribution (PMAD) configurations will be discussed in the paper.

Patrick E. Frye↗

Vision for Space Exploration

Vision tasks include: a) Complete the International Space Station; b) Safely fly the Space Shuttle until 2010; c) Develop and fly the Crew Exploration Vehicle (by 2014); d) Return to the moon (by 2020); e) Sustained and affordable human and robotic program; f) Develop innovative technologies, knowledge, and infrastructures; and g) Promote international and commercial participation.

Smith, Bryan K.↗

Automated Sequence Processor: Something Old, Something New

High productivity required for operations teams to meet schedules Risk must be minimized. Scripting used to automate processes. Scripts perform essential operations functions. Automated Sequence Processor (ASP) was a grass-roots task built to automate the command uplink process System engineering task for ASP revitalization organized. ASP is a set of approximately 200 scripts written in Perl, C Shell, AWK and other scripting languages.. ASP processes/checks/packages non-interactive commands automatically.. Non-interactive commands are guaranteed to be safe and have been checked by hardware or software simulators.. ASP checks that commands are non-interactive.. ASP processes the commands through a command. simulator and then packages them if there are no errors.. ASP must be active 24 hours/day, 7 days/week..

Automated↗

Code for multi-shape Gaussian process (GP) fitting with uncertainty quantification (UQ)

This is code associated with the publication “Nonparametric Multi-shape Modeling with Uncertainty Quantification,” authored by Hengrui Luo (Lawrence Berkeley National Laboratory) and Justin Strait (Los Alamos National Laboratory). The code is used to fit multiple-output Gaussian process (GP) models of planar closed curves to collections of ordered point sets, allowing for flexible nonlinear prediction of the underlying curve under dense or sparse point set samplings and with or without noise, as well as tractable uncertainty quantification. To do this, we employ use of a periodic kernel to account for the nonlinear input space of closed curves, and combine with coregionalization models to account for dependence both (i) between curve coordinates, and (ii) between pairs of curves. Functions in the code are capable of fitting these models, as well as performing additional tasks with the fitted curves such as (a) shape registration and alignment, (b) shape averaging, and (c) fitting for curve sub-populations / clusters.

Strait, Justin↗