Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Spinel”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Atomistic simulation and ab initio study of the defect structure of spinel-related Li{sub 0.5−0.5x}Mg{sub x}Fe{sub 2.5−0.5x}O{sub 4}

Graphical abstract: Unit cell of Li0{sub 5−0.5x}Mg{sub x}Fe{sub 2.5−0.5x}O{sub 4}, showing the lowest energy structure obtained using interatomic potential and DFT ab initio calculations. Large white spheres O{sup 2−}; small light grey spheres Mg{sup 2+} (evenly substituting of Li{sup +} and Fe{sup 3+} at octahedral sites); small dark grey spheres Fe{sup 3+}; small black spheres Li{sup +}. Display Omitted Highlights: ► Defect structure of Li{sub 0.5−0.5x}Mg{sub x}Fe{sub 2.5−x}O{sub 4} is studied with atomistic and DFT methods. ► 19 possible defect structure models with ∼60 defect configurations are investigated. ► The most favourable model found is when Mg{sup 2+} ions evenly replace Li{sup +} and octahedral Fe{sup 3+}. ► This defect structure decreases the magnetisation relative to that of Li{sub 0.5}Fe{sub 2.5}O{sub 4}. ► Experimentally-deduced models, at variance with the one obtained here, are discussed. -- Abstract: The position of magnesium ions in Mg{sup 2+}-doped lithium ferrite of the composition Li{sub 0.5−0.5x}Mg{sub x}Fe{sub 2.5−0.5x}O{sub 4}, which has been a matter of uncertainty among some experimentalists, is investigated using interatomic potential and ab initio DFT calculations. Among possible 19 defect structure models, some of which have been reported experimentally to be the most favorable, the lowest energy is found for Mg{sup 2+} ions evenly replacing Li{sup +} and Fe{sup 3+} ion on octahedral sites. This gives a decrease in magnetisation for the Mg{sup 2+}-doped ferrite relative to the un-doped lithium ferrite. The results suggest that some experimental observations of increased magnetisation of spinel lithium ferrite on Mg{sup 2+}-doping could be due to substitution of Mg{sup 2+} or Li{sup +} on tetrahedral sites at the high temperatures used in preparation of the solid and/or the presence of undetected defects in the initial precursors.

36 MATERIALS SCIENCE↗

Structural, electrical and dielectric properties of spinel nickel ferrite prepared by soft mechanochemical synthesis

Graphical abstract: - Highlights: • Sintered NiFe{sub 2}O{sub 4} was prepared by a soft mechanochemical route from mixture powders. • XRD and Raman measurements indicate that the prepared samples have spinel structure. • The activation energy ΔE are 0.653 and 0.452 eV for NiFe{sub 2}O{sub 4} samples. • Ferrite from Ni(OH){sub 2}/Fe{sub 2}O{sub 3} has lower DC conductivity than from Ni(OH){sub 2}/Fe(OH){sub 3} powders. • The values of dielectric constant of samples NiFe{sub 2}O{sub 4} are 70 and 200, respectively. - Abstract: Nickel ferrite, NiFe{sub 2}O{sub 4} was prepared by a soft mechanochemical route from a mixture of (1) Ni(OH){sub 2} and α-Fe{sub 2}O{sub 3} and (2) Ni(OH){sub 2} and Fe(OH){sub 3} powders in a planetary ball mill for 25 h. The powder samples were sintered at 1100 °C for 2 h and were characterized by X-ray diffraction (XRD), Raman spectroscopy and scanning electron microscopy (SEM). Impedance spectroscopy techniques were used to study the effect of grain and grain boundary on the electrical properties of the prepared samples. A difference in dielectric constant (ε) and dielectric loss tangent (tan δ) of NiFe{sub 2}O{sub 4} samples obtained by the same methods but starting from different initial components was observed.

36 MATERIALS SCIENCE↗

Morphology and structure features of ZnAl{sub 2}O{sub 4} spinel nanoparticles prepared by matrix-isolation-assisted calcination

Graphical abstract: The substrate ZnO as the isolation medium is effective in preventing the sintering and agglomeration of ZnAl{sub 2}O{sub 4} nanoparticles, and it also prevents their contamination. High purity, well-dispersed, and single-crystal ZnAl{sub 2}O{sub 4} nanoparticles with 3.72 eV band gap were obtained. - Abstract: Well-dispersed ZnAl{sub 2}O{sub 4} spinel nanoparticles with an average crystalline size of 25.7 nm were synthesized successfully and easily by polymer-network and matrix-isolation-assisted calcination. The product microstructure and features were investigated by X-ray diffractometry, thermogravimetric and differential thermal analysis, Fourier transform-infrared spectroscopy, N{sub 2} adsorption–desorption isotherms, and energy dispersive X-ray spectra. The morphology and optical performance of the as-prepared ZnAl{sub 2}O{sub 4} nanoparticles were characterized by scanning electron microscope, transmission electron microscopy, and photoluminescence spectrometer. Experimental results indicate that excess ZnO acted as the isolation medium is effective in preventing the sintering and agglomeration of ZnAl{sub 2}O{sub 4} nanoparticles, and it also prevents their contamination. Then, high purity and well-dispersed ZnAl{sub 2}O{sub 4} nanoparticles with single-crystal structure were obtained.

36 MATERIALS SCIENCE↗

A synergistic experimental and theoretical study elucidating the electronic and thermal properties in spinel CuInSnS 4

Quaternary chalcogenides of different structure types continue to be of interest due to the novel physical properties they exhibit and for applications ranging from optoelectronics to energy-related technologies. Herein we report on the electronic and thermal properties of spinel CuInSnS 4 . UV–vis–NIR spectroscopy indicates strong absorption in the visible-light region with an indirect bandgap of 1.52 eV. First-principles computations corroborate our experimental data and reveal that the band-edge electronic properties are due to strong p – d ands – p hybridization and antibonding interactions. Analyses of temperature-dependent thermal properties together with first principles simulations reveal strong anharmonicity and low-lying optical branches that hybridize with the acoustic modes effectively suppressing thermal conductivity. This intrinsically very low thermal conductivity is much lower than that of related chalcogenides. Finally, our findings are discussed in the light of ongoing interest in quaternary metal chalcogenide materials and may aid in the development of this and similar chalcogenides for applications of interest.

36 MATERIALS SCIENCE↗

New precious metal containing normal spinels: LiRhRu 1-x Ir x O 4 , LiFeIr 1-x Ru x O 4 , and LiCoIr 1-x Ru x O 4

Large spin-orbit-coupled cations in geometrically frustrated crystal structures have the most suitable setting for exploring novel exotic states of matter. Spinel oxides (AM 2 O 4 ) are well-known examples of geometrically frustrated systems. In this study, we report for the first time the synthesis of compositions LiRhRu 1-x Ir x O 4 (x = 0–0.5), LiFeIr 1-x Ru x O 4 (x = 0–0.5), and LiCoIr 1-x Ru x O 4 (x = 0–0.3) containing precious metal cations on edge-sharing octahedral M-sites, and systematically investigate their magnetic and electrical properties. 57 Fe Mössbauer spectroscopy revealed that iron is trivalent in all LiFeIr 1-x Ru x O 4 solid solutions. Magnetic measurements indicate deviations from theoretical spin-only magnetic moment values, indicating the influence of spin-orbit coupling owing to the presence of 4d and 5d block elements. The LiFeIr 1-x Ru x O 4 series shows spin-glass-like freezing behavior with T g ≈ 20 K, and a small frustration index (f ≈ 1-2), indicating that the frustration originates from site disorder. LiRhRu 1-x Ir x O 4 and LiCoIr 1-x Ru x O 4 exhibit strongly geometrically frustrated magnetism. Electrical resistivity measurements as a function of temperature indicate that all phases are semiconducting. Seebeck coefficient measurements show that LiRhRu 1-x Ir x O 4 and LiFeIr 1-x Ru x O 4 are p-type semiconductors with holes as the major charge carriers. A sign reversal of the Seebeck coefficient indicates both holes and electrons as carriers for LiCoIr 1-x RuxO 4 (x = 0–0.2), but only holes as major carriers for x = 0.3. Here, the Seebeck coefficient and power factor increase drastically in the LiRhRu 1-x Ir x O 4 solid solution with Ir substitution, reaching a maximum of ≈ +125 μV/K and ≈2.3×10 -6 W/mK 2 at ∼650 K for x = 0.5.

Charge carriers↗

Infrared emissivity of copper-alloyed spinel black coatings for concentrated solar power systems

The directional spectral emissivities of four new copper-alloyed spinel coatings for concentrated solar power applications were measured up to 800 °C and compared Pyromark 2500 ® , deposited in the same conditions on Inconel 625. Reproducible results were found for all coatings at all temperatures, with similar spectral features at working temperatures. The temperature and angular dependences are related to the morphology and composition of the samples. The total hemispherical emissivity increases up to 400 °C for all coatings and then stabilizes, with similar values for most materials, except for the porous Cu 0.5 Cr 1.1 Mn 1.4 O 4 coating. This coating offers a reduced total hemispherical emissivity due to increased semitransparency at high angles arising from its porosity. This porosity is linked to an increase in both the solar absorptance and the emissivity in the normal direction due to enhanced light trapping, which means that this coating shows signs of directional selectivity. These results, together with the data dispersion reported for Pyromark, suggest that structural properties are key for the high-temperature emissivity of the coatings and highlight the importance of direct emissivity characterization. Combined with absorptance measurements, these emissivity measurements allow for accurate calculations of the high-temperature efficiencies of the coatings, which reach values up to 0.929.

14 SOLAR ENERGY↗

First-Principles Statistical Mechanics Study of Magnetic Fluctuations and Order–Disorder in the Spinel LiNi 0.5 Mn 1.5 O 4 Cathode

While significant magnetic interactions exist in lithium transition metal oxides, commonly used as Li-ion cathodes, the interplay between magnetic couplings, disorder, and redox processes remains poorly understood. In this work, we focus on the high-voltage spinel LiNi 0.5 Mn 1.5 O 4 (LNMO) cathode as a model system on which to apply a computational framework that uses first principles-based statistical mechanics methods to predict the finite temperature magnetic properties of materials and provide insights into the complex interplay between magnetic and chemical degrees of freedom. Density functional theory calculations on multiple distinct Ni–Mn orderings within the LNMO system, including the ordered ground-state structure (space group P4332), reveal a preference for a ferrimagnetic arrangement of the Ni and Mn sublattices due to strong antiferromagnetic superexchange interactions between neighboring Mn 4+ and Ni 2+ ions and ferromagnetic Mn–Mn and Ni–Ni couplings, as revealed by magnetic cluster expansions. These results are consistent with qualitative predictions using the Goodenough-Kanamori-Anderson rules. Simulations of the finite temperature magnetic properties of LNMO are conducted using Metropolis Monte Carlo. We find that a “semiclassical” Monte Carlo sampling method based on the Heisenberg Hamiltonian accurately predicts experimental magnetic transition temperatures observed in magnetometry measurements. This study highlights the importance of a robust computational toolkit that accurately captures the complex chemomagnetic interactions and predicts finite temperature magnetic behavior to help analyze experimental magnetic and magnetic resonance spectroscopy data acquired ex situ and operando.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Improving the Thermodynamic Stability of Aluminate Spinel Nanoparticles with Rare Earths

Surface energy is a key parameter to understand and predict the stability of catalysts. In this work, the surface energy of MgAl 2 O 4 , an important base material for catalyst support, was reduced by using dopants prone to form surface excess (surface segregation): Y 3+ , Gd 3+ , and La 3+ . The energy reduction was predicted by atomistic simulations of spinel surfaces and experimentally demonstrated by using microcalorimetry. The surface energy of undoped MgAl 2 O 4 was directly measured as 1.65 ± 0.04 J/m 2 and was reduced by adding 2 mol % of the dopants to 1.55 ± 0.04 J/m 2 for Y-doping, 1.45 ± 0.05 J/m 2 for Gd-doping, and 1.26 ± 0.06 J/m 2 for La-doping. Atomistic simulations are qualitatively consistent with the experiments, reinforcing the link between the role of dopants in stabilizing the surface and the energy of segregation. Surface segregation was experimentally assessed using electron energy loss spectroscopy mapping in a scanning transmission electron microscopy image. Finally, the reduced energy resulted in coarsening inhibition for the doped samples and, hence, systematically smaller particle sizes (larger surface areas), meaning increased stability for catalytic applications. Moreover, both experiment and modeling reveal preferential dopant segregation to specific surfaces, which leads to the preponderance of {111} surface planes and suggests a strategy to enhance the area of desired surfaces in nanoparticles for better catalyst support activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structure and Reactivity of Pristine and Reduced Spinel CoFe 2 O 4 (001)/(100) Surfaces

Cobalt ferrite, CoFe 2 O 4 (CFO), nanocrystals are efficient and competitive anode materials in the field of electrochemical water splitting. Using density functional theory with on-site Hubbard U corrections (DFT+U), we have investigated the structural, electronic and magnetic properties of CFO (001)/(100) surfaces, as well as their reactivities towards water adsorption. Special attention has been focused on the formation of oxygen vacancies (V O ), due to their key role in the oxidation activity of metal oxides, often based on the Mars-van-Krevelen mechanism. Our results show that vacancy formation is easiest at oxygen sites that are not bound to tetrahedrally-coordinated Fe. Water adsorbs mainly in molecular form on the Co/Fe metal cations, whereas it dissociates at defects. In comparison to other spinels, CFO is similar to NiFe 2 O 4 , exhibiting relatively low energy cost of V O formation and a strong affinity of the vacancies towards water. Furthermore, these findings suggest that CFO may be a more promising oxidation catalyst than NiCo 2 O 4 and Co 3 O 4 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Oxygen Deficiency and Reactivity of Spinel NiCo 2 O 4 (001) Surfaces

We carried out density functional theory (DFT) calculations with on-site Hubbard U corrections to investigate the structure, defects, and reactivity of (001) surfaces of spinel NiCo 2 O 4 (NCO), a promising catalyst for CO and methane oxidation. By examining surfaces with different Co/Ni compositions, we find that the formation of surface oxygen vacancies (VOs) on NCO(001) is strongly affected by the neighboring cation in the third layer, the computed formation energy being largest (~1.2 eV) for O vacancies coordinated to third layer Co and smallest (~0.5 eV) for VOs coordinated to a Ni neighboring another Ni ion. As a result, VO formation is generally much easier on NCO (001) than on Co 3 O 4 (001) surfaces, suggesting that NCO may be a better catalyst than Co 3 O 4 for oxidation reactions based on the Mars–Van Krevelen mechanism. Surface oxygen vacancies on reduced NCO surfaces can be healed through dissociative water adsorption at room temperature. In contrast, adsorption of molecular oxygen at VOs is energetically unfavorable under ambient conditions, suggesting that O 2 adsorption may represent the thermodynamic limiting step for oxidation reactions on NCO(001) surfaces.

Shi, Xiao↗

High-Rate Spinel LiMn 2 O 4 (LMO) Following Carbonate Removal and Formation of Li-Rich Interface by ALD Treatment

Recent work has identified enhanced charge-storage capacity in the spinel lithium manganese oxide (LiMn 2 O 4 ; LMO) lithium-ion battery cathode upon a single atomic layer deposition (ALD) cycle composed of one chemical exposure of trimethylaluminum (TMA) and one exposure of water (H 2 O). In this paper, we report further study of the rate capability following one TMA/H 2 O exposure and identify enhanced rate capability versus pristine LMO. To understand this effect, we experimentally probe the surface composition of LMO with TMA/H 2 O treatment using X-ray photoelectron spectroscopy measurements with inert transfer. This includes a study of the LMO surface properties following TMA exposure before exposure to H 2 O. We identify the removal of a surface carbonate layer from LMO upon TMA exposure and the formation of a Li-rich aluminum oxide surface layer upon subsequent H 2 O exposure. We also observe a previously undescribed phenomenon of Li ions depleting from the LMO surface upon TMA exposure and returning upon H 2 O exposure. These effects are connected with the enhanced rate capability of ALD-coated LMO and are related to a range of emerging studies on carbonate surface layers in battery cathodes, as well as the use of ALD to stabilize battery interfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Asymmetric Lithium Extraction and Insertion in High Voltage Spinel at Fast Rate

Spinel-structured ordered-LiNi 0.5 Mn 1.5 O 4 (o-LNMO) has experienced a resurgence of interest in the context of reducing scarce elements such as cobalt from lithium-ion battery. O-LNMO undergoes two two-phase reaction at slow rates. However, it is not known if such phenomenon also applies at fast rates. Herein, we investigate the rate-dependent phase transition behavior of o-LNMO through in operando time-resolved X-ray diffraction. The results indicate that a narrow region of solid solution reaction exists for charge and discharge at both slow and fast rate. The overall phase transition is highly asymmetric at fast rates. During fast charge, it is a particle-by-particle mechanism resulting from asynchronized reaction among the particles. Finally, during fast discharge, it is likely a core-shell mechanism involving transition from Li 0+x Ni 0.5 Mn 1.5 O 4 to Li 1+x Ni 0.5 Mn 1.5 O 4 in the outer layer of particles. The Li 0.5 Ni 0.5 Mn 1.5 O 4 phase is suppressed during fast discharge and only appears through Li redistribution upon relaxation.

25 ENERGY STORAGE↗

Essential Role of Spinel ZnFe 2 O 4 Surfaces during Lithiation

Spinel zinc ferrite (ZnFe 2 O 4 ) is a well-known anode material in lithium ion batteries (LIBs) due to its large theoretical capacity. However, the high potentials observed at the initial stage of lithiation observed cannot be captured using a model of Li + intercalation into the stoichiometric ZnFe 2 O 4 bulk. Here, using density functional theory (DFT) we report for the first time that theZnFe 2 O 4 surfaces are responsible for the measured initial potentials. Among the three identified stable surfaces, ZnFeO 2 -terminated ZnFe 2 O 4 (1 1 0), O-terminated ZnFe 2 O 4 (1 1 1) and Zn-terminated ZnFe 2 O 4 (1 1 1), both (1 1 1) surfaces display higher lithiation potentials than the (1 1 0) surface, and the estimated potentials based on Zn-terminated (1 1 1) fit well with the experimental observations, while using the models based on ZnFe 2 O 4 (1 1 0) and previously ZnFe 2 O 4 bulk, the estimated potentials are much lower. In terms of Li + diffusion, the Zn-terminated ZnFe 2 O 4 (1 1 1) surface is the most active, where the energetically favorable saturation of Li + on the surface is able to facilitate the process. Our results provide a new strategy for the design of LIB materials, via controlling the particle shape and the associated surface characteristics thus enhancing the discharging performance.

25 ENERGY STORAGE↗

High Capacity for Mg 2+ Deintercalation in Spinel Vanadium Oxide Nanocrystals

Nonaqueous Mg batteries can theoretically reach high energy density with cost-effective materials, yet no such device to date has performance competitive with Li-ion technologies. A major barrier is the need for oxide cathodes that combine high capacity and voltage. Very few oxides have shown intrinsic ability for Mg 2+ intercalation in electrolytes with acceptably low content of H2O. Herein, we demonstrate that nanocrystals of MgV 2 O 4 can reach high capacity for Mg 2+ deintercalation with a mechanism that preserves their spinel framework, validated through measurements with different chemical and structural sensitivity. The structural stability contrasts with other phases where reaching high capacity required distortions that introduce undesirable mechanical strain. The favorable properties of the oxide allowed cycling in a full cell with Mg metal. This work reveals new insights into the viability of multivalent intercalation in oxides, meeting a milestone toward the feasibility of high-voltage batteries with either Mg metal or Mg-ion anodes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Harnessing Cation Disorder for Enhancing Ionic Conductivity in Lithium Inverse Spinel Halides

Halides are promising solid-state electrolytes for all-solid-state lithium batteries due to their exceptional oxidation stability, high Li-ion conductivity, and mechanical deformability. However, their practicality is limited by the reliance on rare and expensive metals. This study investigates the Li 2 MgCl 4 inverse spinel system as a cost-effective alternative. Molecular dynamics simulations reveal that lithium disordering at elevated temperatures significantly reduces the activation energy in Li 2 MgCl 4 . To stabilize this disorder at lower temperatures, we experimentally explored the Li x Zr 1–x/2 Mg x/2 Cl 4 system and found that Zr doping induces both Zr and Li disorder at the 16c site at room temperature (RT). This leads to a 2 order-of-magnitude increase in ionic conductivity for the Li 1.25 Zr 0.375 Mg 0.625 Cl 4 composition, achieving 1.4 × 10 –5 S cm –1 at RT, compared to pristine Li 2 MgCl 4 . By deconvoluting the role of lithium vacancies and dopants, we reveal that cation disordering to the 16c site predominantly enhances ionic conductivity, whereas lithium vacancy concentration has a very limited effect.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Kinetic phase evolution of spinel cobalt oxide during lithiation

Spinel cobalt oxide has been proposed to undergo a multiple-step reaction during the electrochemical lithiation process. Understanding the kinetics of the lithiation process in this compound is crucial to optimize its performance and cyclability. In this work, we have utilized a low-angle annular dark-field scanning transmission electron microscopy method to visualize the dynamic reaction process in real time and study the reaction kinetics at different rates. We show that the particles undergo a two-step reaction at the single-particle level, which includes an initial intercalation reaction followed by a conversion reaction. At low rates, the conversion reaction starts after the intercalation reaction has fully finished, consistent with the prediction of density functional theoretical calculations. At high rates, the intercalation reaction is overwhelmed by the subsequently nucleated conversion reaction, and the reaction speeds of both the intercalation and conversion reactions are increased. Phase-field simulations show the crucial role of surface diffusion rates of lithium ions in controlling this process. Furthermore, this work provides microscopic insights into the reaction dynamics in non-equilibrium conditions and highlights the effect of lithium diffusion rates on the overall reaction homogeneity as well as the performance.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Spinel-Structured High Entropy Oxides: Low Temperature Synthesis, Characterization, and Potential Applications

High entropy oxides (HEOs) have recently attracted increasing attention due to their remarkable properties and relatively low cost. Herein we report a simple, highly scalable, and low temperature method for synthesizing spinel (FeNiCoCuZn) 3 O 4 (HEO). We heated an aqueous solution containing divalent cations in high alkali environments to temperatures of 25 - 95 °C for 24 h under atmospheric pressure. The HEO, synthesized at 95 °C for 24 h in 1 M KOH, was paramagnetic at room temperature, with a magnetic mass susceptibility of χ = (7.5 ± 0.2) × 10 –7 m 3 ·kg –1 . It demonstrated stable electrochemical lithium storage performance, with a gravimetric capacity of ∼300 mAh·g –1 at 100 mA·g –1 . It was also active in the electrocatalytic oxygen evolution reaction with an overpotential of 460 mV in alkaline media. The band gap energies were in the range of 2.4 eV. Our advancement in the synthesis and processing of transition metal-based HEOs will undoubtedly render them a viable solution for next generation materials for energy production and storage.

diffraction↗

Unraveling the Voltage-Fade Mechanism in High-Energy-Density Lithium-Ion Batteries: Origin of the Tetrahedral Cations for Spinel Conversion

Discovery of high-voltage layered lithium-and manganese-rich (LMR) composite oxide electrode has dramatically enhanced the energy density of current Li-ion energy storage systems. However, practical usage of these materials is currently not viable because of their inability to maintain a consistent voltage profile (voltage fading) during subsequent charge-discharge cycles. This report rationalizes the cause of this voltage fade by providing the evidence of layer to spinel-like (LSL) structural evolution pathways in the host Li 1.2 Mn 0.55 Ni 0.15 Co 0.1 O 2 LMR composite oxide. By employing neutron powder diffraction, and temperature dependent magnetic susceptibility, we show that LSL structural rearrangement in LMR oxide occurs through a tetrahedral cation intermediate via: i) diffusion of lithium atoms from octahedral to tetrahedral sites of the lithium layer [(Li Li oct →Li Li tet] which is followed by the dispersal of the lithium ions from the adjacent octahedral site of the metal layer to the tetrahedral sites of lithium layer [Li TM oct → Li Li tet]; and ii) migration of Mn from the octahedral sites of the transition metal layer to the permanent octahedral site of lithium layer via tetrahedral site of lithium layer [Mn TM oct Mn Li tet Mn Li oct)]. The findings opens the door to the potential routes to mitigate this atomic restructuring in the high-voltage LMR composite oxide cathodes by manipulating the composition/structure for practical use in high-energy-density lithium-ion batteries.

25 ENERGY STORAGE↗