Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Specific impulse”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Hot Hydrogen Exposure of U x Zr 1-x C y Nuclear Fuel: The Effect of Additional Carbon

Nuclear thermal propulsion (NTP) using hydrogen as propellant in a solid-state fission reactor to reach temperatures of up to 3000K can achieve significantly higher specific impulse than chemical propulsion. A promising fuel that is again considered for NTP is U x Zr 1-x C y . To reduce the overall mass loss as well as the uranium fuel loss, a range of experiments using additional carbon in hot hydrogen (2600 K, 6 SLPM flow rate) were performed for up to 5-6 h. Both a CH 4 addition (0.1 and 0.2 vol%) in the hydrogen stream and the use of sacrificial graphite pieces upstream of the samples were tested, with sample compositions from 5 at% UC to 30 at% UC. The results showed a strong reduction of mass loss, up to a factor of 3, as well as a reduction of surface uranium losses in the presence of additional carbon in the atmosphere. Even with additional carbon in the atmosphere, material with 30 at% UC was not stable, but material with 20 at% UC was stable for up to 6h. The sample surfaces showed texturing after processing, possibly by grain growth on the surface. This led to a separation into grains with high uranium content close to the (100)-orientation, and with low uranium content in grains close to the (111)-orientation.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

Assessment of Near-Term Fuel Screening and Qualification Needs for Nuclear Thermal Propulsion Systems

Nuclear thermal propulsion (NTP) is an in-space propulsion technology capable of both high specific impulse (850–1000 s) and thrust (44–1112 kN), which can help reduce trip times for crewed missions beyond low Earth orbit. NTP technology has been demonstrated during historic programs. Over 20 ground test reactor experiments were performed, which demonstrated the prototypic reactor operations, during the Nuclear Engine for Rocket Vehicle Application (NERVA)/Rover program (1955–1972). Although historical programs have shown that NTP is a viable in-space propulsion technology, developing NTP in modern programs is contingent on the development and qualification of ultrahigh-temperature nuclear fuel technologies that can withstand engine operating conditions. In historical NTP development programs such as NERVA/Rover, prototypic reactor/engine schemes were ground tested to assess the overall system feasibility and to qualify the reactor fuel forms for eventual flight systems. Although this approach is effective to verify fuel performance under prototypic conditions, relying solely on full-scale NTP reactor tests as the pathway for verifying or qualifying fuel is inefficient and cost prohibitive today. Additionally, modern nuclear licensing requirements state that before test reactor approval, reactor components and fuel elements should be qualified via non-nuclear (out-of-pile) and nuclear (in-pile) testing under representative operating conditions. Using this methodology, fuel matures as production scale fabrication methods are established, and as produced fuel performance is demonstrated. Here, this paper provides an overview of historical approaches to NTP fuel performance maturation, including fuel screening and qualification needs, and provides insight for establishing an efficient testing paradigm that can be implemented to rapidly and affordably develop NTP fuel forms for eventual qualification.

42 ENGINEERING↗
DOE OSTI2022

Subscale maturation of advanced reactor technologies (SMART): A path forward for nuclear thermal propulsion fuel and reactor development

Nuclear Thermal Propulsion (NTP) systems are actively being developed for future crewed missions to Mars. NTP systems excel in missions where both high thrust and high specific impulse are required, but modern NTP systems currently do not have a Technology Readiness Level (TRL) high enough for use in crewed space exploration. TRLs are used to demonstrate the level of rigor with which a component/system has been tested/demonstrated for its intended use. While space systems technology in general must be qualified as a unit, nuclear technology must be first demonstrated to meet qualification level requirements both at the fuel (component) level and the reactor (subsystem) level. Here, in this paper, historic NTP development programs are surveyed to identify a testing and development strategy that can be effectively implemented to allow for NTP reactor development. Based on this strategy, required facilities to enable such activities are identified. Current domestic experimental capabilities to support NTP qualification are limited to separate effects testing of individual components. Separate effects testing is found extensively in historic NTP development efforts but is not sufficient for full fuel and reactor qualification. Combined effects testing allows for an accurate assessment of fuel performance but is not achievable for NTP conditions in existing facilities. Assessment of historic development programs suggests that an intermediate, subscale test facility is necessary to advance NTP TRLs. A solution to meet this need is proposed, namely the Subscale Maturation of Advanced Reactor Technologies (SMART) facility. SMART will mitigate risk to NTP development by enabling performance and reactor physics demonstrations of NTP subsystems. A SMART facility could be built by modifying existing nuclear test facilities, which may potentially enable schedule and cost savings. To pursue reactor qualification beyond the subscale, a new ground test facility will be necessary. This ground test facility should be developed concurrently with SMART to allow for the facility to be operational in time for expedited NTP engine demonstration.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Automated power-following control for nuclear thermal propulsion startup and shutdown using MOOSE-based applications

This paper describes an investigation of various automated control strategies applied to a full-core multiphysics Griffin/Bison/RELAP-7 model of a prototypical nuclear thermal propulsion system. In all cases, control is achieved by actuating control drums based on the demanded power and predicted quantities from the numerical model. One key finding is that hybrid proportional integral derivative controllers – a novel type of controller that uses both power and reactivity predicted signals – can demonstrate a level of performance rivaling that of period-generated control. The former requires parameter tuning, while the latter mostly necessitates providing reactivity coefficients and temperature rates of change, which could be very challenging to accurately measure in real-time. In addition, decay heat plays an important role in determining cooling requirements during cooldown phases. A decay heat model, accounting for burn time and throttling, was derived, and is incorporated within the model to simulate the steady-state and shutdown phases and satisfyingly follow the power demand. However, temperature overshoots and non-constant specific impulse during throttling will necessitate further improvements.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2022

Detailed chemistry modeling of rotating detonations with dilute n -heptane sprays and preheated air

Utilization of liquid fuels is crucial to enabling commercialization of rotating detonation engines (RDE) in the near future. In this study, Eulerian-Lagrangian simulations are conducted for rotating detonative combustion with dilute n-heptane sprays and preheated air. Two-dimensional flattened configuration is used and a skeletal chemical mechanism with 44 species and 112 elementary reactions for n-heptane combustion is adopted. The flow structure, droplet distribution, and thermochemical parameters in the refill zone are first analyzed. It is shown that the mixture in the refill zone is heterogeneous, including evaporating droplets, vapor, and air. When the total temperature is below 950 K, the average equivalence ratio increases with the total temperature. When it is higher than 950 K, the average equivalence ratio is almost constant. Subsequently, the chemical explosive mode analysis is applied to identify the controlling reactions and dominant combustion modes in the fuel refill zone and reaction fronts. Results demonstrate that the initiation reaction (R104: n-C 7 H 16 + O 2 2-C 7 H 15 + HO 2 ) and low-temperature reaction (R107: RO 2 R'O 2 H) are dominant in the upstream and downstream of the refill zone, respectively. The intermediate species from low-temperature chemistry, R'O 2 H, is found to be important for the chemical explosive mode in the undetonated mixture. The influence of species diffusion and dispersed droplets is further analyzed. Results show that vapor autoignition facilitated by droplet evaporation occurs in the refill zone. Finally, the effects of the air total temperature on the detonation propagation speed and RDE propulsion performance are investigated. Further, it is found that the detonation propagation speed and specific impulse increase with air total temperature. The total pressure ratio first increases and then decreases as the air total temperature increases. Moreover, when the total temperature of the preheated air is above 1,300 K, the effects of low-temperature chemistry are negligible.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2023

Combined Heat Shield and Solar Thermal Propulsion System for an Oberth Maneuver

As humanity continues its exploration of space, many space missions are enabled by increases in speed. Examples include outer planet and dwarf planet exploration missions and missions that travel through our solar system into interstellar space. For many of these applications speeds of >10 astronomical units per year (AU/yr) are desired. A powered gravity assist around the Sun may offer the best option for reaching this goal; however, current heat shields and kick stages are too heavy or generate too little thrust. Solar thermal propulsion overcomes this tradeoff by converting the heat of the Sun into thrust. By tripling the specific impulse relative to chemical propulsion and by enabling a smaller perihelion through active cooling, this approach nearly doubles the escape velocity. Our team has designed and built working solar thermal propulsion prototypes out of materials that can survive 2700 K at a 30 x 30 cm scale. These benchtop-scale demonstrations have thus far validated the simplifying assumptions that underlie our thermal and propulsion models. Despite growing confidence that a full-scale heat shield/heat exchanger can survive an Oberth maneuver, many questions remain regarding the feasibility of long-term cryogenic storage of hydrogen propellant.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2024

Deflection of Plasma by High Magnetic Fields at Variable Pressures (Final Report)

The goal of the proposed work is to study the deflection of plasma by high magnetic fields using the high uniform magnetic field of the Magnetized Dusty Plasma Experiment (MDPX) located at the Magnetized Plasma Research Laboratory (MPRL) at Auburn University. The proposal team consists of faculty from the University of Alabama in Huntsville (UAH). One of the motivations for this work is to study the concept of a magnetic nozzle for pulsed fusion propulsion. Fusion propulsion can provide extremely high specific impulse, >30,000 sec, for fuel-efficient and thus mass-efficient trips to other planets. One such fusion propulsion design of interest in this research is the Pulsed Fission-Fusion (PuFF) concept. PuFF uses a Z-pinch device to create a fusion reaction at the back of the spacecraft inside the magnetic nozzle. As the resulting plasma explosion is isotropic, a large portion of the momentum will be directed toward the ship and needs to be redirected to efficiently produce thrust. The magnetic nozzle is thus necessary to redirect or deflect the plasma from an isotropic expansion into the directed thrust. Thus, the pulsed-fusion propulsion nozzle is herein referred to as a deflection magnetic nozzle, as opposed to the more traditional and well-studied accelerating magnetic nozzle. The purpose of this project was thus to study the behavior of a plasma in the MDPX fields to better understand the plasma-field interactions and how it could lead to deflection and a pulsed fusion magnetic nozzle.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Low-Power Nuclear Heating Tests of UN Fuel Particles in Hydrogen Environment for Nuclear Thermal Propulsion

Recently, there has been a reemergence of interest within the space-exploration community regarding nuclear thermal propulsion (NTP) for interplanetary travel. NTP, as conceptualized, is a compact propulsion source, is relatively light because there is no need for an oxidizing agent and has a very high specific impulse compared to traditional forms of propulsion. These factors would reduce first-leg orbital-rocketry costs (by the source’s low weight and volume) and decrease overall travel time for astronauts with higher transit speeds. Idaho National Laboratory was provided bare, uncoated, and tungsten-coated uranium nitride fuel particles as part of a preliminary investigation. The fuel was fabricated by BWX Technologies and irradiated at the Massachusetts Institute of Technology research reactor. X-ray computed tomography and scanning electron microscopy and associated chemical analysis techniques were performed on these particles at Idaho National Laboratory. Both coated and uncoated forms were examined in the as-fabricated and as-irradiated conditions. The tungsten coating was found to be intact following the irradiation, indicating positive attributes for performance under these low-power-irradiation conditions. The irradiation of uncoated particles resulted in nitrogen enrichment at the edge of the particle.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
NASA NTRS1963

A Variational Method for the Optimization of Interplanetary Round-Trip Trajectories

The indirect method of the calculus of variations is used to optimize interplanetary round-trip trajectories for the case of a single, central, attracting body. The method of solution makes use of certain partial derivative properties of the Lagrangian multipliers associated with the Mayer formulation of the variational problem. This property of the multipliers allows the construction of mathematical expressions for certain other partial derivatives that must vanish when an optimum round trip has been found. These expressions are developed for the cases of propulsion systems using (1) fixed thrust and specific impulse or (2) variable thrust and constant exhaust jet power. Two numerical examples demonstrate how the analytical results may be applied to the solution of round-trip problems including (1) actual three-dimensional planetary positions and (2) planetocentric maneuvers.

VARIATIONAL CALCULUS↗
NASA NTRS1962

ELECTRIC PROPULSION- A NEW TECHNOLOGY

Within the past 3 years, electric thrust devices have passed from the first exploratory feasibility experiments to the flight-engineered hardware phase. This rapid surge of development has been punctuated by equally rapid improvements in the performance figures of electrical thrust devices. The most spectacular advances were made in ion engine technology. Total energy expenditure per ion pair has gone from 35,000 ev in 1958 to about 600 ev at the present time leading to power utilization efficiencies of up to 80 per cent, depending upon the specific impulse. The percentage of the particles intercepting the accelerating and focusing electrodes has been reduced from more than 50 per cent in 1958 to less than 0.01 per cent at the present time. Great improvements in ion current per unit area have also been realized, leading to greater thrust "pressures."

PLASMA ENGINE↗
NASA NTRS1963

THIRTY DAY ENDURANCE TEST OF A 30KW ARC JET ENGINE

Details are presented on a 30-day run of a radiation cooled thermal arc jet engine. The engine performed satisfactorily throughout the test period, maintaining a thrust of 250 grams and a propellant specific impulse greater than 1000 seconds a t an input power level of 30 kilowatts. The resulting propulsive efficiency was greater than 40 percent. Visual examination of the arc discharge through a quartz constrictor indicates that there is a smooth, constant diameter, bright core extending from the cathode completely through the constrictor to the cathode. Photographic observations on the arc discharge, using a red filter, indicate that the center of the column is darker than the outside: and this, in turn, suggests that the maximum core temperature is greater than 20,000°K. Calculations on the energy flow rate through a fully developed laminar column, combined with the experimental observation that the longitudinal energy flux gradient along the column is small, suggest that there may be a region of high volumetric energy release in the vicinity of the cathode tip.

Arc jet↗
NASA NTRS1964

Hybrid rocket propulsion <la propulsion par fusees hybrides<

The aim of the first part of this article is to demonstrate the potentialities of hybrids in the space program. These potentialities are applicable to all three main classes of chemical rockets currently in use, namely: (1) storable -propellant rockets, (2) cryogenic-propellant rockets, and (3) semistorable-propellant rockets, where the non-storable element is introduced at the time of firing. On the basis of these three categories, the properties of hybrid systems are discussed in relation to the specific impulse. The hybrid method of propulsion is compared with standard solid- and liquid-propellant propulsion systems. The second part of the article is concerned with the fundamental problems of combustion, the emphasis being placed on the rate of regression of the solid phase, which determines the performance of the system. Different theories of the regression rate are described and compared with various experimental results.

Cryogenic propellant↗
NASA NTRS1966

Cold solid propellant motor has stop-restart capability

Solid propellant rocket is kept and fired at low temperatures in launch vehicles or spacecraft. The motor is capable of developing a specific impulse comparable to that of liquid propellant motors, is started, stopped, and restarted, and is stored in space without solar radiation causing hot spots on the motor casing.

Hendel, F. J.↗
NASA NTRS1967

Microwave Driven Magnetic Plasma Accelerator Studies (CYCLOPS)

A microwave-driven cyclotron resonance plasma acceleration device was investigated using argon, krypton, xenon, and mercury as propellants. Limited ranges of propellant flow rate, input power, and magnetic field strength were used. Over-all efficiencies (including the 65% efficiency of the input polarizer) less than 10% were obtained for specific impulse values between 500 and 1500 sec. Power transfer efficiencies, however, approached 100% of the input power available in the right-hand component of the incident circularly polarized radiation. Beam diagnostics using Langmuir probes, cold gas mapping, r-f mapping and ion energy analyses were performed in conjunction with an engine operating in a pulsed mode. Measurements of transverse electron energies at the position of cyclotron resonant absorption yielded energy values more than an order of magnitude lower than anticipated. The measured electron energies were, however, consistent with the low values of average ion energy measured by retarding potential techniques. The low values of average ion energy were also consistent with the measured thrust values. It is hypothesized that ionization and radiation limit the electron kinetic energy to low-values thus limiting the energy which is finally transferred to the ion. Thermalization by electron-electron collision was also identified as an additional loss mechanism. The use of light alkali metals, which have relatively few low lying energy levels to excite, with the input power to mass ratio selected so as to limit the electron energies to less than the second ionization potential, is suggested. It is concluded, however, that the over-all efficiency for such propellants would be less than 40 per cent.

CYCLOPS PLASMA ACCELERATOR↗