Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Snow model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Snow Crystal Orientation Effects on the Scattering of Passive Microwave Radiation

For this study, consideration is given to the role crystal orientation plays in scattering and absorbing microwave radiation. A discrete dipole scattering model is used to measure the passive microwave radiation, at two polarizations (horizontal and vertical), scattered by snow crystals oriented in random and non random positions, having various sizes (ranging between 1 micrometers to 10,000 micrometers in radius), and shapes (including spheroids, cylinders, hexagons). The model results demonstrate that for the crystal sizes typically found in a snowpack, crystal orientation is insignificant compared to crystal size in terms of scattering microwave energy in the 8,100 gm (37 GHz) region of the spectrum. Therefore, the assumption used in radiative transfer approaches, where snow crystals are modeled as randomly oriented spheres, is adequate to account for the transfer of microwave energy emanating from the ground and passing through a snowpack.

Foster, J. L.↗

Measurements of thermal infrared spectral reflectance of frost, snow, and ice

Because much of Earth's surface is covered by frost, snow, and ice, the spectral emissivities of these materials are a significant input to radiation balance calculations in global atmospheric circulation and climate change models. Until now, however, spectral emissivities of frost and snow have been calculated from the optical constants of ice. We have measured directional hemispherical reflectance spectra of frost, snow, and ice from which emissivities can be predicted using Kirchhoff's law (e = 1-R). These measured spectra show that contrary to conclusions about the emissivity of snow drawn from previously calculated spectra, snow emissivity departs significantly from blackbody behavior in the 8-14 micrometer region of the spectrum; snow emissivity decreases with both increasing particle size and increasing density due to packing or grain welding; while snow emissivity increases due to the presence of meltwater.

Salisbury, John W.↗

Radar-based Snow Property Profile Retrievals for NSA

The product contains estimated snow microphysical properties retrieved primarily from vertically-profiling radar observations using a priori constraints that are dependent on atmospheric state. The product provides data at 1-minute time resolution, including snowfall rate at the surface and vertical profiles at 300-meter resolution of snow particle size distribution parameters and snow water contents. Estimated uncertainties for the snowfall rates and snow water contents are also provided. The product is obtained using an optimal estimation retrieval in which radar forward model and a priori state characteristics are based on expected snow particle microphysical and radar scattering properties evaluated from field experiment data.

54 ENVIRONMENTAL SCIENCES↗

Remote sensing of earth terrain

A mathematically rigorous and fully polarimetric radar clutter model used to evaluate the radar backscatter from various types of terrain clutter such as forested areas, vegetation canopies, snow covered terrains, or ice fields is presented. With this model, the radar backscattering coefficients for the multichannel polarimetric radar returns can be calculated, in addition to the complex cross correlation coefficients between elements of the polarimetric measurement vector. The complete polarization covariance matrix can be computed and the scattering properties of the clutter environment characterized over a broad range of incident angle and frequencies.

Kong, J. A.↗

Evaluation of preindustrial to present-day black carbon and its albedo forcing from Atmospheric Chemistry and Climate Model Intercomparison Project (ACCMIP)

As part of the Atmospheric Chemistry and Climate Model Intercomparison Project (ACCMIP), we evaluate the historical black carbon (BC) aerosols simulated by 8 ACCMIP models against observations including 12 ice core records, long-term surface mass concentrations, and recent Arctic BC snowpack measurements. We also estimate BC albedo forcing by performing additional simulations using offline models with prescribed meteorology from 1996-2000. We evaluate the vertical profile of BC snow concentrations from these offline simulations using the recent BC snowpack measurements. Despite using the same BC emissions, the global BC burden differs by approximately a factor of 3 among models due to differences in aerosol removal parameterizations and simulated meteorology: 34 Gg to 103 Gg in 1850 and 82 Gg to 315 Gg in 2000. However, the global BC burden from preindustrial to present-day increases by 2.5-3 times with little variation among models, roughly matching the 2.5-fold increase in total BC emissions during the same period.We find a large divergence among models at both Northern Hemisphere (NH) and Southern Hemisphere (SH) high latitude regions for BC burden and at SH high latitude regions for deposition fluxes. The ACCMIP simulations match the observed BC surface mass concentrations well in Europe and North America except at Ispra. However, the models fail to predict the Arctic BC seasonality due to severe underestimations during winter and spring. The simulated vertically resolved BC snow concentrations are, on average, within a factor of 2-3 of the BC snowpack measurements except for Greenland and the Arctic Ocean. For the ice core evaluation, models tend to adequately capture both the observed temporal trends and the magnitudes at Greenland sites. However, models fail to predict the decreasing trend of BC depositions/ice core concentrations from the 1950s to the 1970s in most Tibetan Plateau ice cores. The distinct temporal trend at the Tibetan Plateau ice cores indicates a strong influence from Western Europe, but the modeled BC increases in that period are consistent with the emission changes in Eastern Europe, the Middle East, South and East Asia. At the Alps site, the simulated BC suggests a strong influence from Europe, which agrees with the Alps ice core observations. At Zuoqiupu on the Tibetan Plateau, models successfully simulate the higher BC concentrations observed during the non-monsoon season compared to the monsoon season but overpredict BC in both seasons. Despite a large divergence in BC deposition at two Antarctic ice core sites, some models with a BC lifetime of less than 7 days are able to capture the observed concentrations. In 2000 relative to 1850, globally and annually averaged BC surface albedo forcing from the offline simulations ranges from 0.014 to 0.019Wm−2 among the ACCMIP models. Comparing offline and online BC albedo forcings computed by some of the same models, we find that the global annual mean can vary by up to a factor of two because of different aerosol models or different BC-snow parameterizations and snow cover. The spatial distributions of the offline BC albedo forcing in 2000 show especially high BC forcing (i.e., over 0.1W/sq. m) over Manchuria, Karakoram, and most of the Former USSR. Models predict the highest global annual mean BC forcing in 1980 rather than 2000, mostly driven by the high fossil fuel and biofuel emissions in the Former USSR in 1980.

snow cover↗

Evaluation of MODIS and VIIRS Cloud-Gap-Filled Snow-Cover Products for Production of an Earth Science Data Record

MODerate resolution Imaging Spectroradiometer (MODIS) cryosphere products have been available since 2000 – following the 1999 launch of the Terra MODIS and the 2002 launch of the Aqua MODIS – and include global snow-cover extent (SCE) (swath, daily, and 8 d composites) at 500 m and ∼5 km spatial resolutions. These products are used extensively in hydrological modeling and climate studies. Reprocessing of the complete snow-cover data record, from Collection 5 (C5) to Collection 6 (C6) and Collection 6.1 (C6.1), has provided improvements in the MODIS product suite. Suomi National Polar-orbiting Partnership (S-NPP) Visible Infrared Imaging Radiometer Suite (VIIRS) Collection 1 (C1) snow-cover products at a 375 m spatial resolution have been available since 2011 and are currently being reprocessed for Collection 2 (C2). Both the MODIS C6.1 and the VIIRS C2 products will be available for download from the National Snow and Ice Data Center beginning in early 2020 with the complete time series available in 2020. To address the need for a cloud-reduced or cloud-free daily SCE product for both MODIS and VIIRS, a daily cloud-gap-filled (CGF) snow-cover algorithm was developed for MODIS C6.1 and VIIRS C2 processing. MOD10A1F (Terra) and MYD10A1F (Aqua) are daily, 500 m resolution CGF SCE map products from MODIS. VNP10A1F is the daily, 375 m resolution CGF SCE map product from VIIRS. These CGF products include quality-assurance data such as cloud-persistence statistics showing the age of the observation in each pixel. The objective of this paper is to introduce the new MODIS and VIIRS standard CGF daily SCE products and to provide a preliminary evaluation of uncertainties in the gap-filling methodology so that the products can be used as the basis for a moderate-resolution Earth science data record (ESDR) of SCE. Time series of the MODIS and VIIRS CGF products have been developed and evaluated at selected study sites in the US and southern Canada. Observed differences, although small, are largely attributed to cloud masking and differences in the time of day of image acquisition. A nearly 3-month time-series comparison of Terra MODIS and S-NPP VIIRS CGF snow-cover maps for a large study area covering all or parts of 11 states in the western US and part of southwestern Canada reveals excellent correspondence between the Terra MODIS and S-NPP VIIRS products, with a mean difference of 11 070 sqkm, which is ∼0.45 % of the study area. According to our preliminary validation of the Terra and Aqua MODIS CGF SCE products in the western US study area, we found higher accuracy of the Terra product compared with the Aqua product. The MODIS CGF SCE data record beginning in 2000 has been extended into the VIIRS era, which should last at least through the early 2030s.

Hall, Dorothy K.↗

Use of midlatitude soil moisture and meteorological observations to validate soil moisture simulations with biosphere and bucket models

Soil moisture observations in sites with natural vegetation were made for several decades in the former Soviet Union at hundreds of stations. In this paper, the authors use data from six of these stations from different climatic regimes, along with ancillary meteorological and actinometric data, to demonstrate a method to validate soil moisture simulations with biosphere and bucket models. Some early and current general circulation models (GCMs) use bucket models for soil hydrology calculations. More recently, the Simple Biosphere Model (SiB) was developed to incorporate the effects of vegetation on fluxes of moisture, momentum, and energy at the earth's surface into soil hydrology models. Until now, the bucket and SiB have been verified by comparison with actual soil moisture data only on a limited basis. In this study, a Simplified SiB (SSiB) soil hydrology model and a 15-cm bucket model are forced by observed meteorological and actinometric data every 3 h for 6-yr simulations at the six stations. The model calculations of soil moisture are compared to observations of soil moisture, literally 'ground truth,' snow cover, surface albedo, and net radiation, and with each other. For three of the stations, the SSiB and 15-cm bucket models produce good simulations of seasonal cycles and interannual variations of soil moisture. For the other three stations, there are large errors in the simulations by both models. Inconsistencies in specification of field capacity may be partly responsible. There is no evidence that the SSiB simulations are superior in simulating soil moisture variations. In fact, the models are quite similar since SSiB implicitly has a bucket embedded in it. One of the main differences between the models is in the treatment of runoff due to melting snow in the spring -- SSiB incorrectly puts all the snowmelt into runoff. While producing similar soil moisture simulations, the models produce very different surface latent and sensible heat fluxes, which would have large effects on GCM simulations.

Robock, Alan↗

Radar spectral observations of snow

Radar remote sensing experiments have been conducted at test sites in Kansas, Colorado, and South Dakota over the last six years to examine backscatter coefficient response to snowcovered terrain. Truck-mounted 1-35 GHz scatterometers were employed in conjunction with detailed ground-truth measurements. From these experiments and associated modeling efforts, most of the fundamental questions concerning backscatter behavior in response to important snow parameters have been, at least qualitatively, answered. The optimum angular range seems to be between 20 and 50 deg and, for these angles, the results indicate that the radar backscatter generally: (1) increases with increasing water equivalent, (2) decreases with increasing liquid water, (3) increases with increasing crystal size, (4) is insensitive to surface roughness for dry snow conditions, and (5) can be sensitive to soil state if the snowcover is dry. This paper gives a summary of these results, along with empirical and theoretical models for describing the backscatter from snow.

Stiles, W. H.↗

Evaluating fine-resolution, regional outputs of a variable resolution global climate model

Climate models have been used to study water resources and regional hydrologic responses to climate change, but climate model outputs must be downscaled to provide relevant regional data. However, the accuracy of this regional data is limited by uncertainties across and within downscaling methods, uncertainty across global outputs, and discontinuities at downscaled boundaries. A new alternative to traditional downscaling is a variable resolution model that incorporates fine-resolution regions directly into a coarse-resolution, global climate simulation in order to capture contiguous dynamics across resolution boundaries. In this study, we used the Variable-Resolution Community Earth System Model (VR-CESM) to generate one-eighth degree (14 km) fine-resolution outputs for the western U.S. and eastern China from 1970-2006. We focus our evaluation on precipitaiton, temperature, snow pack, solar radiation, and wind. We compare the model outputs with remote-sensing-based precipitation data, and both reanalysis and gridded weather station data for precipitation and temperature. VR-CESM generally has a cold bias in winter and a warm bias in summer in the western U.S., which compensate each other to reduce the annual bias. In eastern China, however, the sign of temperature biases are more consistent throughout the year with cold biases in the higher mountains and warm biases throughout most of the rest of the region. Precipitation biases are dependent upon reference data, and show slight overestimation in high mountain regions in both the U.S. and China with respect to gridded weather station data. Simulated snow cover in the western U.S. is reasonable compared to remote sensing data, but snow cover and snow water equivalent have larger biases when compared to reanalysis data. In eastern China there are widespread snow cover biases compared to remote sensing data. VR-CESM underestimates downward shortwave radiation to a greater degree in summer than in winter, and underestimates surface layer windspeed over mountains to a greater degree than in other areas. Comparison between VR-CESM and a coarser simulation (1-degree Beijing Climate Center model) shows reduced precipitation biases in the mountainous regions with finer resolution, indicating the value of variable-resolution modeling for reigonal studies.

Di Vittorio, Alan↗

Theory and experiment for passive microwave remote sensing of snowpacks

Both the theory and experiment for the passive remote sensing of snow with microwave radiometers have been studied. The volume scattering effects of snow are accounted for by incorporating Mie scattering theory into a radiative transfer model. The theory is applied to the interpretation of experimental data obtained from various snow measurements. The spectral and angular dependences of the brightness temperatures are illustrated and show good agreement between the theory and experiment. Brightness temperatures as a function of snow depths are also interpreted and discussed. It is observed that as the snow depth increases, the brightness temperature increases when the subsurface is an aluminum plate due to the fact that the plate is cold and snow absorption induces a brightening effect and the brightness temperature decreases when the subsurface is soil due to the fact that snow scattering induces darkening effects.

Kong, J. A.↗

The Surface Albedo of Sea Ice in CMIP6 and the Implications for the Surface Albedo Feedback

The Arctic has experienced rapid sea ice loss and a substantial decline in surface albedo, significantly impacting its radiation budget. Climate models from the Coupled Model Intercomparison Project (CMIP6) reproduce these changes. However, inconsistencies remain among models regarding the magnitude, spatial distribution, and seasonal patterns of Arctic surface albedo evolution. This study investigates these discrepancies by comparing model outputs with observation from the Clouds and the Earth's Radiant Energy System (CERES). We develop a decomposition method to assess the contributions of sea ice albedo, sea ice concentration, and sea ice extent to Arctic surface albedo. Over land, differences in snow cover account for the substantial inter-model spread in surface albedo, while over the ocean, sea ice albedo, concentration, and extent all contribute. Comparisons between CMIP6 and the Atmospheric Model Intercomparison Project (AMIP) simulations, which use identically prescribed sea ice concentrations, reveals considerable inter-model spread in Arctic Ocean surface albedo due to differences in sea ice albedo. Applying the decomposition method to projections shows that models predicting larger decreases in sea ice concentration and extent, especially in the Central Arctic, exhibit lower surface albedo and stronger sea ice albedo feedback. Beyond 2050, Arctic Ocean surface albedo decline is mainly influenced by sea ice extent indicating that the retreat of the ice edge is the most important process to constrain the surface albedo feedback. This study provides insights into factors contributing to the spread and changes in Arctic surface albedo and the associated sea ice albedo feedback.

Patrick C Taylor↗

Can Remotely Sensed Snow Disappearance Explain Seasonal Water Supply?

Understanding the relationship between remotely sensed snow disappearance and seasonal water supply may become vital in coming years to supplement limited ground based, in situ measurements of snow in a changing climate. For the period 2001–2019, we investigated the relationship between satellite derived Day of Snow Disappearance (DSD)—the date at which snow has completely disappeared—and the seasonal water supply, i.e., the April—July total streamflow volume, for 15 snow dominated basins across the western U.S. A Monte Carlo framework was applied, using linear regression models to evaluate the predictive skill—defined here as a model’s ability to accurately predict seasonal flow volumes—of varied predictors, including DSD and in situ snow water equivalent (SWE), across a range of spring forecast dates. In all basins there is a statistically significant relationship between mean DSD and seasonal water supply (p ≤ 0.05), with mean DSD explaining roughly half of the variance. Satellite-based model skill improves later in the forecast season, surpassing the skill of in-situ-based (SWE) models in skill in 10 of the 15 basins by the latest forecast date. We found little to no correlation between model error and basin characteristics such as elevation and the ratio of snow water equivalent to total precipitation. Despite a relatively short data record, this exploratory analysis shows promise for improving seasonal water supply prediction, in particular for snow dominated basins lacking in situ observations.

snow remote sensing↗

Attribution of Snowpack Errors to Simulated Temperature and Precipitation in E3SMv1 Over the Contiguous United States

Abstract Snow water equivalent (SWE), temperature, and precipitation biases and trends are evaluated in the atmosphere‐land simulations of the Energy Exascale Earth System Model version 1 (E3SMv1) in comparison to the Community Earth System Model version 2 (CESM2) and two other models using the ground measurement‐based University of Arizona (UA) snow product. SWE, temperature, and precipitation biases are highest in magnitude in the Western contiguous United States (CONUS). SWE errors are attributed to temperature and precipitation through multiple linear regressions of normalized errors, the coefficients of which represent the sensitivities to temperature and precipitation errors. SWE errors are more sensitive to temperature errors throughout the CONUS. Model SWE and temperature trends are generally opposite from UA product trends in the Western CONUS. SWE trend errors are also attributed to temperature and precipitation trend errors using multiple linear regressions of normalized trend errors. SWE trend errors are more sensitive to those of precipitation at higher elevations (>1,500 m) in the Western CONUS in these simulations. Thus, the sensitivity to temperature and precipitation differ for SWE errors and its trend errors. Furthermore, the SWE trend errors are more sensitive to temperature and precipitation in the atmosphere‐ocean coupled simulations in which the atmosphere‐land is coupled to an active ocean model. These results suggest that both errors in simulated temperature and precipitation contribute to SWE errors.

Meteorology & Atmospheric Sciences↗

Soil Moisture Active Passive (SMAP) Project Assessment Report for Version 4 of the L4_SM Data Product

This report provides an assessment of Version 4 of the SMAP Level 4 Surface and Root Zone Soil Moisture (L4_SM) product, released on 14 June 2018. The assessment includes comparisons of L4_SM soil moisture and temperature estimates with in situ measurements from core validation sites and sparse networks. The assessment further includes a global evaluation of the internal diagnostics from the ensemble-based data assimilation system that is used to generate the L4_SM product, including observation-minus-forecast (O-F) brightness temperature residuals and soil moisture analysis increments.Together, the core validation site comparisons and the statistics of the assimilation diagnostics areconsidered primary validation methodologies for the L4_SM product. Comparisons against in situ measurements from regional-scale sparse networks are considered a secondary validation methodology because such in situ measurements are subject to upscaling errors from the point-scale to the grid-cell scale of the data product.The Version 4 L4_SM product benefits from an improved land surface modeling system and from retrospective surface meteorological forcing data that are as consistent as possible with the present-day datain terms of their climatology. Specifically, the model changes include revised parameters and parameterizations for (i) the surface energy balance, (ii) recharge from below of the model's surface excess reservoir, and (iii) the snow depletion curve. Updated ancillary inputs include improved datasets for landcover, topography, and vegetation height. The Version 4 algorithm further includes a revised approach to precipitation corrections that improves the precipitation climatology in Africa and the high-latitudes. Moreover, for system calibration the model is forced retrospectively with MERRA-2 reanalysis data, which are more consistent with the near-real time GEOS forward processing (FP) data used during the SMAP period than the retrospective GEOS data that were available for previous L4_SM versions. An analysis of the time-average surface and root zone soil moisture shows that the global pattern ofarid and humid regions is captured by the Version 4 L4_SM estimates. Owing to the changes in the landsurface modeling system, surface soil moisture is typically drier by several volumetric percent in Version 4 compared to Version 3, whereas root zone soil moisture is wetter in Version 4 in some regions and drierin others. Because of these climatological differences, the Version 3 and Version 4 products should not be combined into a single dataset for use in applications.Results from the core validation site comparisons indicate that Version 4 of the L4_SM data product meets the self-imposed L4_SM accuracy requirement, which is formulated in terms of the RMSE after removal of the long-term mean difference (ubRMSE). The overall ubRMSE of the 3-hourly L4_SM dataat the 9 km scale is 0.039 m3 m-3 for surface soil moisture and 0.029 m3 m-3 for root zone soil moisture,below the 0.04 m3 m-3 requirement. The L4_SM estimates are an improvement over estimates from a model-only Nature Run version 7.2 (NRv7.2), which demonstrates the beneficial impact of the SMAP brightness temperature data. Overall, L4_SM surface and root zone soil moisture estimates are more skillful than NRv7.2 estimates, with statistically significant improvements at the 5% level for surface soil moisture R and anomaly R values. Results from comparisons of the L4_SM product to i

Reichle, Rolf H.↗

Theoretical modelling and experimental data matching for active and passive microwave remote sensing of Earth terrain

Two theoretical models were developed to characterize terrain media: a random medium with a variance, a horizontal correlation length; and a homogeneous dielectric containing discrete scatterers. The earth terrain is modelled as layers of such scattering media bounded by air above and half-space below. Matching the theoretical results with experimental data collected from vegetation and snow-ice fields shows that: (1) for observation angles near nadir, rough surface effects are important; (2) for snow-ice field the horizontal correlation length is greater than the vertical correlation length whereas for vegetation field their relative sizes depend on the types of vegetation; (3) the vertically polarized backscattering cross-section is always larger than the horizontally polarized backscattering cross-section for half-space scattering media; (4) for snow field displaying diurnal change, a three-layer model including a thin top layer caused by sunlight illumination must be used; and (5) for a random medium with equal horizontal and vertical correlation lengths, the measured data can also be matched with a corresponding discrete scatterer model.

Kong, J. A.↗