Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Slow control”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27
All sourcesNASA NTRSDOE OSTI
NASA NTRS1944

Aerodynamic Tests of a Full-scale TBF-1 Aileron Installation in the Langley 16-foot High-Speed Tunnel

The failure of wing panels on a number of TBF-1 and TBM-1 airplanes in flight has prompted several investigations of the possible causes of failure. This report describes tests in the Langley 16-foot high-speed tunnel to determine whether these failures could be attributed to changes in the aerodynamic characteristics of the ailerons at high speeds. The tests were made of a 12-foot-span section including the tip and aileron of the right wing of a TBF-1 airplane. Hinge moments, control-link stresses due to aerodynamic buffeting, and fabric-deflection photographs were obtained at true airspeeds ranging from 110 to 365 miles per hour. The aileron hinge-moment coefficients were found to vary only slightly with airspeed in spite of the large fabric deflections that developed as the speed was increased. An analysis of these results indicated that the resultant hinge moment of the ailerons as installed in the airplane would tend to restore the ailerons to their neutral position for all the high-speed flight conditions covered in the tests. Serious aerodynamic buffeting occurred at up aileron angles of -10 degrees or greater because of stalling of the sharp projecting lip of the Frise aileron. The peak stresses set up in the aileron control linkages in the buffeting condition were as high as three times the mean stress. During the hinge-moment investigation, flutter of the test installation occurred at airspeeds of about 150 miles per hour. This flutter condition was investigated in some detail and slow-motion pictures were made of the motion of the wing tip and aileron. The flutter was found to involve simultaneous normal bending and chordwise oscillation of the wing and flapping of the aileron. The aileron motion appeared to be coupled with this flutter condition and was investigated in some detail and slow-motion pictures were made of the motion of the wing tip and aileron. The flutter was found to involve simultaneous normal bending and chordwise oscillation of the wing and flapping of the aileron. The aileron motion appeared to be coupled with the motion of the wing through the mass unbalance of the aileron in the normal-to-chord plane due to location of the hinge line 2.17 inches below the center of gravity of the aileron. Flutter did not occur when the installation was stiffened to prevent chordwise motion or when the bending frequency of the aileron system was appreciably higher than that of the wing as in the complete airplane installation.

Becker, John V↗
NASA NTRS2016

Modeling Antarctic Subglacial Lake Filling and Drainage Cycles

The growth and drainage of active subglacial lakes in Antarctica has previously been inferred from analysis of ice surface altimetry data. We use a subglacial hydrology model applied to a synthetic Antarctic ice stream to examine internal controls on the filling and drainage of subglacial lakes. Our model outputs suggest that the highly constricted subglacial environment of our idealized ice stream, combined with relatively high rates of water flow funneled from a large catchment, can combine to create a system exhibiting slow-moving pressure waves. Over a period of years, the accumulation of water in the ice stream onset region results in a buildup of pressure creating temporary channels, which then evacuate the excess water. This increased flux of water beneath the ice stream drives lake growth. As the water body builds up, it steepens the hydraulic gradient out of the overdeepened lake basin and allows greater flux. Eventually this flux is large enough to melt channels that cause the lake to drain. Lake drainage also depends on the internal hydrological development in the wider system and therefore does not directly correspond to a particular water volume or depth. This creates a highly temporally and spatially variable system, which is of interest for assessing the importance of subglacial lakes in ice stream hydrology and dynamics.

drainage↗
NASA NTRS1990

An automated environment for multiple spacecraft engineering subsystem mission operations

Flight operations at the Jet Propulsion Laboratory (JPL) are now performed by teams of specialists, each team dedicated to a particular spacecraft. Certain members of each team are responsible for monitoring the performances of their respective spacecraft subsystems. Ground operations, which are very complex, are manual, labor-intensive, slow, and tedious, and therefore costly and inefficient. The challenge of the new decade is to operate a large number of spacecraft simultaneously while sharing limited human and computer resources, without compromising overall reliability. The Engineering Analysis Subsystem Environment (EASE) is an architecture that enables fewer controllers to monitor and control spacecraft engineering subsystems. A prototype of EASE has been installed in the JPL Space Flight Operations Facility for on-line testing. This article describes the underlying concept, development, testing, and benefits of the EASE prototype.

Bahrami, K. A.↗
NASA NTRS1992

Telescience Testbed Program: A study of software for SIRTF instrument control

As a continued element in the Telescience Testbed Program (TTP), the University of Arizona Steward Observatory and the Electrical and Computer Engineering Department (ECE) jointly developed a testbed to evaluate the Operations and Science Instrument System (OASIS) software package for remote control of an instrument for the Space Infrared Telescope Facility (SIRTF). SIRTF is a cryogenically-cooled telescope with three focal plane instruments that will be the infrared element of NASA's Great Observatory series. The anticipated launch date for SIRTF is currently 2001. Because of the complexity of the SIRTF mission, it was not expected that the OASIS package would be suitable for instrument control in the flight situation, however, its possible use as a common interface during the early development and ground test phases of the project was considered. The OASIS package, developed at the University of Colorado for control of the Solar Mesosphere Explorer (SME) satellite, serves as an interface between the operator and the remote instrument which is connected via a network. OASIS provides a rudimentary windowing system as well as support for standard spacecraft communications protocols. The experiment performed all of the functions required of the MIPS simulation program. Remote control of the instrument was demonstrated but found to be inappropriate for SIRTF at this time for the following reasons: (1) programming interface is too difficult; (2) significant computer resources were required to run OASIS; (3) the communications interface is too complicated; (4) response time was slow; and (5) quicklook of image data was not possible.

Young, Erick T.↗
NASA NTRS1979

Weight control and restraint of laboratory rats

The use of restrained and confined rats in some procedures used in combustion toxicology introduces the problems of obtaining rats of the appropriate size for the apparatus, and of identifying any artifacts resulting from the use of restraint alone. Feeding studies indicate that controlled feeding of fast-growing strains such as the Sprague-Dawley can hold rat size essentially constant for significant periods of time. The undesirable aspects are the need to cage the animals individually, with resultant psychological as well as metabolic effects. Restraint studies of slow-growing strains such as the Fischer 344 indicate that denying access to food and water for periods of several hours at a time interrupts normal gain only temporarily.

Hilado, C. J.↗
NASA NTRSDate not supplied

Toward Hall MHD Power Generation and Drag Augmentation Using a Coaxial-Electrode Configuration During Hypersonic Entry

Planetary EDL requires that a spacecraft must reduce its relative velocity from multiple km/s to zero for safe landing. The entry phase requires slowing down through an intense hypersonic flight regime (Mach 25 to Mach 5). Magnetohydrodynamics (MHD) is a next-generation concept with a wide untapped set of technologies that can expand planetary exploration capabilities and create more robust entry vehicles by utilizing in-situ resources, increasing control authority, and reducing heat flux. There is therefore a need for an experimentally validated simulation tool for MHD technologies in hypersonic entry.

MHD drag↗
NASA NTRS2018

A Plasma Aerocapture and Entry System for Manned Missions and Planetary Deep Space Orbiters

A rapid mission to Mars requires a large change in vehicle velocity upon arrival to establish a stable orbit. This demand is even greater for a Neptune science, requiring many kilometers per second of V. It is clear from past mission studies that a manned Mars mission and deep space planetary orbiters require aerobraking and aerocapture which use aerodynamic drag forces to slow the spacecraft. Aerocapture would enable long term studies of the outer planets and moons that would not be possible with existing braking methodologies. While the ability to utilize these atmospheres to slow down and capture spacecraft would dramatically reduce the cost, launch mass, and travel time, currently planned approaches require significant additional spacecraft mass and risk as the spacecraft must descend deep into the planetary atmosphere in order to produce significant drag on a relatively small aeroshell. The plasma based Magnetoshell being developed in this program holds the potential to perform the desired braking with significantly increased drag and control while dramatically reducing mass. Most importantly, this technology significantly lowers the risk involved with aerocapture thereby making manned planetary missions possible. The fundamental physics of the Magnetoshell is based on demonstrated experimental results. Successful implementation will dramatically decrease radiation exposures, mission risk, launch cost, and launch mass. Implementation of aerobraking by employing a solid deflector or aeroshell as a method for orbit insertion and circularization has been successfully demonstrated in the past, resulting in launch mass savings greater than 50%. In order to reduce the effect of frictional heating and dynamic pressure on the typically fragile aeroshell, or worse solar panels, the braking must be distributed over many orbital passes at a high altitude in the less dense regions of the atmosphere. It can thus take several months for a meter-scale, 1000 kg, aeroshell to execute the many elliptic orbital passes through the atmosphere to achieve the required V. This rather slow method of braking not only reduces frictional heating and dynamic forces, but also avoids unpredictable dynamic behavior due to turbulence, as well as unknown and seasonally variable atmospheric composition and temperature which has led to dangerous, mission-critical events. For exploration class missions such as DRA 5.0 aerocapture and Thermal Protection Systems (TPS) are proposed for breaking at Mars for cargo missions. Traditional aerocapture is considered too risky for manned missions. Even with the enormous mass savings that aerocapture allows, it still requires 80 tons of aeroshell and significantly increased launch mass and propellant. As will be shown, by using Magnetoshells for aerobraking, the DRA 5.0 mission will save 224 metric tons (MT) and greater than $2 B in launch costs. Beyond the dramatic savings for existing mission architectures, a low-mass, risk-free aerocapture system would allow much more rapid missions to Mars and deep space orbiters by allowing direct, faster trajectories. As will be shown, the plasma Magnetoshell Aerobraking, Aerocapture, and Entry System (AAES) not only reduces mass and cost while enabling significant new mission architectures, but also significantly reduces radiation exposures by decreasing trip times.

Manned Missions↗
NASA NTRS1996

Eye Movements Reveal Hierarchical Motion Processing

Purpose: In the analysis of visual motion, local features such as orientation are analyzed early in the cortical processing stream (V1), while integration across orientation and space is thought to occur in higher cortical areas such as MT, MST, etc. If all areas provide inputs to eye movement control centers, we would expect that local properties would drive eye movements with relatively short latencies, while global properties would require longer latencies. When such latencies are observed, they can provide information about when (and where?) various stimulus properties are analyzed. Methods: The stimulus employed was an elliptical Gabor patch with a drifting carrier, in which the orientations of the carrier grating and the contrast window were varied independently. We have previously demonstrated that the directional percepts evoked by this stimulus vary between the "grating direction" (the normal to the grating's orientation) and the "window direction", and that similar effects can be observed in reflexive eye movements. Subjects viewed such a stimulus while attempting to maintain steady fixation on the center of the pattern, and the small reflexive eye movements ("stare OKN") were recorded. In the middle of the trial, the orientation of either the grating or the window was rotated smoothly by 30 degrees. Results: Responses to the shift of both grating orientation and window orientation are seen in the average OKN slow phase velocity. Grating rotations produce a rapid OKN rotation to the grating direction (100 ms latency, 300 ms time constant), followed by a slower rebound to the steady state perceived direction midway between the grating and window directions. Window rotations, on the other hand, evoke a slower response (200 ms latency, 500 ms time constant). Conclusions: The results demonstrate multiple cortical inputs to eye movement control: a fast, early input driven by orientation, and a slower input from higher areas sensitive to global stimulus properties.

Mulligan, Jeffrey B.↗
NASA NTRS1972

Contributions of the space program to our knowledge of motion sickness.

A slow rotation room (SRR) was used in a laboratory setting to study experimental motion sickness. This SRR simulates, to some degree, the conditions on a rotating spacecraft. Habitability of the chamber was ascertained by subjects who remained in the room for over a month with experimenters in attendance. Control over stressful accelerations involved regulation of the room's angular velocity and the subject's head rotations. By standardizing the head rotations, the strength of the disturbing stimulus became a function of the room's angular velocity. Mild acute episodes of motion sickness were readily kept under control. Certain techniques demonstrated that a subject's susceptibility may be expressed in terms of the number of head motions at a particular angular velocity to reach a chosen endpoint. Investigations using prolonged exposure used rapid increase in rpm to terminal velocity to evoke symptoms, or incremental increase to terminal velocity to prevent them. The effectiveness of 16 representative antimotion sickness drugs is discussed.

Graybiel, A.↗
NASA NTRS1993

Greater Bone Fomation Induction Occurred in Aged Than Young Cancellous Bone Sites

We have determined the differences in the effects of continual prostaglandin E2 (PGE2) treatment in aged (non-growing) and young (growing) cancellous bone sites in 7 month-old Sprague-Dawley rats. The sites involved are the aged Distal Tibial Metaphysis (DTM) with a closed epiphysis and the young Proximal Tibial Metaphysis (PTM) with a slow growing, open epiphysis. The study involved rats treated with 0, 1, 3 or 6 mg PGE2/kg/d for 60, 120 and 180 days. Static and dynamic histomorphometty of percent trabecular area, and tissue-referent bone formation rate (BFR/TV) were determined in both DTM and PTM. In pretreatment controls, the secondary spongiosa of the two metaphyses contain the same amount of cancellous bone (11% in DTM vs. 13% in PTM), but markedly less bone formation in DTM (0.6%/y in DTM vs. 41.5%/y in PTM). After 60 days of 6 mg PGE2/kg/d treatment, %Tb.Ar was increased 607% in DTM and 199% in PTM, BFR/TV was increased to nearly 14 fold in DTM and only 5 fold in PTM. These results indicated the aged metaphysis of the DTM was much more responsive to PGE2 treatment than young, growing metaphysis of the PTM. The results of 120 and 180 days treatment did not significantly differ from 60 days treatment in both sites, indicating that the effect of continuous daily PGE2 treatment were in equilibrium after 60 days. We concluded that aged metaphysis was much more responsive to PGE2 treatment than young growing metaphysis.

Ke, H. Z.↗
NASA NTRS1997

Eye Movement Latencies to Direction Change for Different Classes of Motion

In the analysis of visual motion, local features such as orientation are analyzed early in the cortical processing stream (V1), while integration across orientation and space is thought to occur in higher cortical areas such as MT, MST, etc. If all areas provide inputs to eye movement control centers, we would expect that local properties would drive eye movements with relatively short latencies, while global properties would require longer latencies. When such latencies are observed, they can provide information about when (and where?) various stimulus properties are analyzed. To this end, a stimulus was employed in which local and global properties determining perceived direction-of-motion could be manipulated independently: an elliptical Gabor patch with a drifting carrier, with variable orientation of the carrier grating and the contrast window. We have previously demonstrated that the directional percepts evoked by this stimulus vary between the "grating direction" (the normal to the grating's orientation) and the "window direction" (ARVO 91, 94), and that similar effects can be observed in reflexive eye movements (ARVO 95). Subjects viewed such a stimulus while attempting to maintain steady fixation on the center of the pattern, and the small reflexive eye movements ("stare OKN") were recorded. In the middle of the trial, the orientation of either the grating or the window was rotated smoothly by 30 degrees. Responses to the shift of both grating orientation and window orientation are seen in the average OKN slow phase velocity. Grating rotations produce a rapid OKN rotation to the grating direction (100 ms latency, 300 ms time constant), followed by a slower rebound to the steady state perceived direction midway between the grating and window directions. Window rotations, on the other hand, evoke a slower response (200 ms latency, 500 ms time constant). The results demonstrate multiple cortical inputs to eye movement control: a taste early input driven by orientation, and a slower input from higher areas sensitive to global stimulus properties.

Mulligan, Jeffrey B.↗
NASA NTRS1976

Three-level sampler having automated thresholds

A three-level sampler is described that has its thresholds controlled automatically so as to track changes in the statistics of the random process being sampled. In particular, the mean value is removed and the ratio of the standard deviation of the random process to the threshold is maintained constant. The system is configured in such a manner that slow drifts in the level comparators and digital-to-analog converters are also removed. The ratio of the standard deviation to threshold level may be chosen within the constraints of the ratios of two integers N and M. These may be chosen to minimize the quantizing noise of the sampled process.

Jurgens, R. F.↗
NASA NTRS1981

Optical gyroscope system

Light beams pass in opposite directions through a single mode fiber optic wave guide that extends in a circle or coil in an optical gyroscope system which measures the rotation rate of the coil by measuring the relative phase shifts of the beams by interferometric techniques. Beam splitting and phase shifting of the light are facilitated by utilizing brief pulses of light and by using light-controlling devices which are operated for a brief time only when the light pulse passes in one direction through the device but not at a different time when the pulse is passing in the opposite direction through the device. High accuracy in rotation measurement is achieved at both very slow and very fast rotation rates, by alternately operating the system so that at zero rotation the interfering waves are alternately 90 out of phase and in phase. Linear polarization of the light beams is maintained by coiling the full length of the optic fiber in a single plane.

Goss, W. C.↗
NASA NTRS1991

Comparison of force and tactile feedback for grasp force control in telemanipulation

The comparative efficacy of using direct force feedback or a simple vibrotactile display to convey changes in the intensity of remote grasp force relayed from a robotic end effector is examined. The findings show that a simple vibrotactile cue, in the absence of direct force feedback, is effective in signaling abrupt changes in remote grasp force regardless of magnitude, and when changes in force are not too slow or protracted in nature (i.e., ramp time less than 2 s). In cases where the operator must dynamically tract and respond to slow but large variations in grasp force, the comparatively crude vibrotactile display would prove helpful; but would not be as effective as that of a direct contact force display. Immediate applications and utility of current generation and near-term prototype tactile displays are discussed.

Wiker, Steven F.↗
NASA NTRS1995

Turbulence in the solar wind: Kinetic effects

Although a casual look at the fluctuating magnetic and velocity fields in the solar wind may be reminiscent of a chaotic and disordered flow, there is, nonetheless. considerable organization and structure in the temporal and spatial evolution of those fluctuations. Much of that evolution is controlled by processes operating on rather large scales for example, in the inner heliosphere, the fluctuations in magnetic and velocity are highly correlated in the sense of outward propagating Alfven waves. This correlation can be destroyed both in time and distance by the velocity gradients present between fast and slow streams and by other nonlinear processes which stir the medium, producing a turbulent cascade of energy from large to small scales. Many aspects of this turbulent evolution can be described using fluid models; however, at some scale the fluid approximation breaks down and a more detailed paradigm is necessary. The breakdown is evident in the power spectrum of magnetic fluctuations at scales approaching the wavelength of ion cyclotron waves. At those scales, as evident in Mariner 10 and other magnetometer data, the spectrum bends over and the fluctuations damp, possibly heating the ambient plasma. Some evidence for heating of the solar wind is present in the Voyager data. Fluid models can be modified to some extent to incorporate aspects of a kinetic treatment. This is done by modifying the dissipation terms in the fluid equations and by including extra terms, such as the Hall term. As the scale lengths of phenomena shrink further and approach the spatial and temporal scales characteristic of electron phenomena, the fluid description must be abandoned altogether and a fully kinetic treatment is required. One example is the generation of Langmuir solitons produced by the electron beams that generate type 3 solar radio bursts.

Goldstein, M. L.↗
NASA NTRS2003

Elevated Temperature Creep Deformation in Solid Solution <001> NiAL-3.6Ti Single Crystals

The 1100 to 1500 K slow plastic strain rate compressive properties of <001> oriented NiAl-3.6Ti single crystals have been measured, and the results suggests that two deformation processes exist. While the intermediate temperature/faster strain rate mechanism is uncertain, plastic flow at elevated temperature/slower strain rates in NiAl-3.6Ti appears to be controlled by solute drag as described by the Cottrell-Jaswon solute drag model for gliding b = a(sub 0)<101> dislocations. While the calculated activation energy of deformation is much higher (approximately 480 kJ/mol) than the activation energy for diffusion (approximately 290 kJ/mol) used in the Cottrell-Jaswon creep model, a forced temperature compensated - power law fit using the activation energy for diffusion was able to adequately (greater than 90%) predict the observed creep properties. Thus we conclude that the rejection of a diffusion controlled mechanism can not be simply based on a large numerical difference between the activation energies for deformation and diffusion.

Whittenberger, J. Daniel↗
NASA NTRS2008

The Stationary Condensation and Radial Outflow of a Liquid Film on a Horizontal Disk

The application of capillary screen liquid acquisition devices to space-based cryogenic propulsion systems is expected to necessitate thermodynamic conditioning in order to stabilize surface tension retention characteristics. The present results have been obtained in the framework of the research of low gravity condensation-flow processes for conditioning cryogenic liquid acquisition devices. The following system is studied: On the top of a subcooled horizontal disk, a liquid film condenses from the ambient saturated vapor. The liquid is forcedly removed at the disk edge, and there is an outward radial flow of the film. Stationary regimes of the flow are uncovered such that (i) the gravity is negligible, being eclipsed by the capillary forces; (ii) the film thickness is everywhere much smaller than the disk radius; and (iii) the slow-flow lubrication approximation is valid. A nonlinear differential equation for the film thickness as a function of the radial coordinate is obtained. The (two-dimensional) fields of velocities, temperature and pressure in the film are explicitly determined by the radial profile of its thickness. The equilibrium is controlled by two parameters: (i) the vapor-disk difference of temperatures and (ii) the liquid exhaust rate. For the flow regimes with a nearly uniform film thickness, the governing equation linearizes, and the film interface is analytically predicted to have a concave-up quartic parabola profile. Thus, perhaps counter-intuitively, the liquid film is thicker at the edge and thinner at the center of the disk.

Bolshinskiy, Leonid↗
NASA NTRS1973

Application of ERTS-1 imagery to detecting and mapping modern erosion features, and to monitoring erosional changes, in southern Arizona

The author has identified the following significant results. ERTS-1 multispectral images have been used, without additional data, to prepare three maps at 1:1 million scale of the 18,000 sq. mi. project area: (1) modern (post-1890 A. D.) arroyos and channels; (2) types of stream channels; and (3) potential erodibility of soils; surficial deposits, and bedrock. Also completed was the collection and compilation of ground truth geologic, soil, and hydrologic data. Field studies to obtain ground control for the photointerpretive mapping include: (1) measurements, at many sites, of the depth, width, and channel characteristics of arroyos and gullies, and cross profiles of stream channels, flood plains, and Holocene terraces; and (2) stratigraphic measurements of the Holocene alluvial deposits. Significant conclusions from these extensive stratigraphic studies are: Slow deposition of sediment was the dominant process on stream lowlands throughout the project area for at least 2000 years prior to 1890 A.D. The deposition was broken by only two relatively brief and minor erosional episodes of regional importance, when channels no more than a third of the depth of modern channels were cut. The modern erosion has produced within about 80 years substantially more and larger arroyos than any erosion episode during the last 2000 years, and the end is not in sight.

Morrison, R. B.↗