Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Sample Calculations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Atomic layer deposition of 2D and 3D standards for synchrotron-based quantitative composition and structure analysis methods

Atomic layer deposition (ALD) is a scalable deposition technique known for producing uniform, conformal films of a wide range of compounds on nearly any substrate material. These traits make it an ideal deposition method for producing films to replace the National Institute of Standards and Technology (NIST) standards and create Standard Reference Materials (SRMs) on a wide range of relevant two-dimensional and three-dimensional substrates. The use of SRM from NIST for quantitative analysis of chemical composition using synchrotron based x-ray fluorescence (SR-XRF) and scanning transmission x-ray microscopy (STXM) is common. Such standards, however, can suffer from inhomogeneity in chemical composition and thickness and often require further calculations, based on sample mounting and detector geometry, to obtain quantitative results. These inhomogeneities negatively impact the reproducibility of the measurements and the quantitative measure itself. Utilizing Rutherford backscattering, x-ray reflectivity, quartz crystal microbalance, STXM, and SR-XRF, the authors show that ALD is capable of producing high quality standards that are homogenous over scales ranging from nanometers to 100s of micrometers.

Becker, Nicholas G.↗

Soil bulk density and texture data collected during field survey associated with NEON AOP survey, East River, CO 2018

The purpose of soil core sampling was to determine soil bulk density, volumetric water content, and soil texture across the sites that were sampled in association with the National Ecological Observatory Network's Airborne Observation Platform (NEON AOP) in 2018. Soil cores were collected from surface (2.5-7.5 cm) and subsurface (50-55cm) depths at sampling sites across East River, Washington Gulch, Slate River, and Coal Creek watersheds in Gunnison, Colorado during the summer of 2018. Surface samples were weighed for determination of soil water content prior to dry down for bulk density calculations. For all samples, we measured dry weight and weight of < 2mm fraction and conducted soil textural analysis. We provide metadata for the samples, raw data files, python code that was used to calculate bulk density, water content, and texture fraction densities from primary datasets, and a final csv file with the calculated soil bulk density, volumetric water content, and soil texture data. Additional associated site metadata and vegetation fractional cover information can be found in the associated data release.

54 ENVIRONMENTAL SCIENCES↗

External Magnetic Field Suppression of Carbon Diffusion in Iron

External magnetic fields reduce diffusion of carbon in BCC iron, but the physical mechanism is not understood. Using DFT calculations with magnetic moments sampled from a Heisenberg model, we calculate diffusivities of carbon in iron at high temperatures and with field. Our model reproduces the measured suppression of diffusivity from field. Here, we find that increasing magnetic disorder flattens the electron density of states compared with the ferromagnetic case, which distorts the octahedral cages around carbon, lowering the activation barrier to diffusion; an applied field reverses these trends.

36 MATERIALS SCIENCE↗

Stochastic Modeling of Radioactive Material Releases

Nonreactor nuclear facilities operated under the approval authority of the U.S. Department of Energy use unmitigated hazard evaluations to determine if potential radiological doses associated with design basis events challenge or exceed dose evaluation guidelines. Unmitigated design basis events that sufficiently challenge dose evaluation guidelines or exceed the guidelines for members of the public or workers, merit selection of safety structures, systems, or components or other controls to prevent or mitigate the hazard. Idaho State University, in collaboration with Idaho National Laboratory, has developed a portable and simple to use software application called SODA (Stochastic Objective Decision-Aide) that stochastically calculates the radiation dose associated with hypothetical radiological material release scenarios. Rather than producing a point estimate of the dose, SODA produces a dose distribution result to allow a deeper understanding of the dose potential. SODA allows users to select the distribution type and parameter values for all of the input variables used to perform the dose calculation. SODA then randomly samples each distribution input variable and calculates the overall resulting dose distribution. In cases where an input variable distribution is unknown, a traditional single point value can be used. SODA was developed using the MATLAB coding framework. The software application has a graphical user input. SODA can be installed on both Windows and Mac computers and does not require MATLAB to function. SODA provides improved risk understanding leading to better informed decision making associated with establishing nuclear facility material-at-risk limits and safety structure, system, or component selection. It is important to note that SODA does not replace or compete with codes such as MACCS or RSAC, rather it is viewed as an easy to use supplemental tool to help improve risk understanding and support better informed decisions. The work was funded through a grant from the DOE Nuclear Safety Research and Development Program.

61 RADIATION PROTECTION AND DOSIMETRY↗

Observed and model-calculated NO2/NO ratios in tropospheric air sampled during the NASA GTE/CITE-2 field study

Airborne measurements of NO2/NO ratios in the free troposphere, obtained using two-photon LIF (TP-LIF) and chemiluminescence (CL) detectors during the NASA Global Tropospheric Experiment Chemical Instrumentation Test and Evaluation 2 (CITE 2) program in summer 1986, are analyzed and compared with the predictions of a photochemical model. The derivation of the model is outlined, with an emphasis on the role of peroxy radicals in the fast photochemical cycling of NO and NO2 and the production of O3; the CITE 2 instruments and flight protocols are described; and the results are presented in extensive tables and graphs and discussed in detail. It was found that on three CITE 2 flights the CL data were systematically greater than the TP-LIF data; when these data were removed, the averaged values of the two instruments agreed to within 1 percent. The NO2/NO ratios predicted by the model are shown to be consistent with the measurements, although usually 20-25 percent lower.

Chameides, W. L.↗

Crystallization history of the 1984 Mauna Loa lava flow

During a 3-week eruption in 1984, Mauna Loa produced vent lavas that increased in crystallinity from less than 1 to 30%, and 27-km-long flows that increased in crystallinity as they moved downstream. We examined the crystallization history of these lavas using crystal size distribution (CSD) analysis to study the rates of crystallization, viscosity increase, and latent heating. Typical average growth and nucleation rates were 5 x 10(exp -9) cm/s and 5/cu cm/s for microphenocrysts (20- to 500-micron size crystals nucleated in the rift zone) and 5 x 10(exp -8) cm/s and 5 x 10(exp 4)/cu cm/s for microlites (1- to 20-micron size crystals nucleated in the channel). These crystallization rates are high compared with those found in other CSD studies of igneous rocks, probably due to highly nonequilibrium conditions brought on by rapid degassing in the rift zone and cooling in the lava channel. Growth and nucleation rates decreased with time at the vent and with distance downstream. The maximum downstream total crystallinity measured is 39% (25% microlites, 14% microphenocrysts) in a quenched sample 14 km from the vent. Growth and nucleation rates cannot be calculated for postemplacement samples, but they place upper limits of 53-58% on the amount of crystallization in the channel 9-20 km from the vent. Crystallization could have been mostly responsible for the 10(exp 5)-fold downstream increase in apparent viscosity, although degassing and increasing incorporation of solid lava fragments also contributed. Another effect of crystallization on the lava flow was the sizeable latent heating (0.01 J/g/s over the first half of the flow length, if the crystallinity of downstream quench samples is representative of the hot fluid core), which may have been counteracted by entrainment of cooler material. Measurements of crystallization are shown to be crucial in the study of lava flow emplacement dynamics.

Crisp, Joe↗

Kuang's Semi-Classical Formalism for Calculating Electron Capture Cross Sections and Sample Application for ENA Modeling

Accurate estimates of electron-capture cross sections at energies relevant to ENA modeling (approx. few MeV per nucleon) and for multi-electron ions must rely on detailed, but computationally expensive, quantummechanical description of the collision process. Kuang's semi-classical approach is an elegant and efficient way to arrive at these estimates. Motivated by ENA modeling efforts, we shall briefly present this approach along with sample applications and report on current progress.

Barghouty, A. F.↗

Evaluation of third order nonlinear optical parameters of CdS/PVA nanocomposite

CdS nanoparticles dispersed in PVA are prepared by Chemical method at room temperature. The nonlinear optical parameters such as nonlinear absorption (β), nonlinear refractive index (n{sub 2}) and nonlinear susceptibility (χ{sup 3}) are calculated for this sample by using Z-scan technique. CdS/PVA samples show the two photon absorption mechanism. The third order nonlinear susceptibility is calculated from n{sub 2} and β and is found to be of the order of 10{sup −7} – 10{sup −8} m{sup 2}/V{sup 2}. The larger value of third order nonlinear susceptibility is due to dielectric and quantum confinement effect.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

FASTER 3: A generalized-geometry Monte Carlo computer program for the transport of neutrons and gamma rays. Volume 1: Summary report

The theory used in FASTER-III, a Monte Carlo computer program for the transport of neutrons and gamma rays in complex geometries, is outlined. The program includes the treatment of geometric regions bounded by quadratic and quadric surfaces with multiple radiation sources which have specified space, angle, and energy dependence. The program calculates, using importance sampling, the resulting number and energy fluxes at specified point, surface, and volume detectors. It can also calculate minimum weight shield configuration meeting a specified dose rate constraint. Results are presented for sample problems involving primary neutron, and primary and secondary photon, transport in a spherical reactor shield configuration.

Jordan, T. M.↗

Electronic and optical properties of Ga{sub 3−x}In{sub 5+x}Sn{sub 2}O{sub 16}: An experimental and theoretical study

Experimental measurements of optical and electronic properties and local-density approximation (LDA) calculations on polycrystalline Ga{sub 3−x}In{sub 5+x}Sn{sub 2}O{sub 16}—the so-called “T-phase” in the Ga{sub 2}O{sub 3}-In{sub 2}O{sub 3}-SnO{sub 2} ternary system—have revealed it to be a good candidate for n-type transparent conducting oxide applications, particularly in the replacement of tin-doped indium oxide as a transparent electrode in organic photovoltaics. Room temperature conductivity of over 1000 S cm{sup −1} was measured in polycrystalline bulk samples. Band structure calculations reveal a highly dispersed conduction band, corresponding to an electron effective mass of about 0.2 m{sub e}. Normalized carrier mobility and concentration trends indicate that conductivity changes in T-phase are attributable to changes in carrier concentration, with mobility remaining relatively constant through the range of processing conditions and sample composition. Screened exchange LDA calculations yield a fundamental band gap of about 2.60 eV. A relatively constant optical band gap in the range of 2.9–3.0 eV along the range of T-phase composition was measured by diffuse reflectance of bulk samples, whereas ab-initio simulations predict a decreasing fundamental band gap with increasing In-to-Ga ratio. This is attributed to an increasing Burstein-Moss shift—corresponding to increasing free electron concentration—with increasing In-to-Ga ratio.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Methods for a blind analysis of isobar data collected by the STAR collaboration

In 2018, the STAR collaboration collected data from $_{44}^{96}{\mathrm{Ru}}+_{44}^{96}{\mathrm{Ru}}$ and $_{40}^{96}{\mathrm{Zr}}+_{40}^{96}{\mathrm{Zr}}$ at $\sqrt{s_\text {NN}}=200$ GeV to search for the presence of the chiral magnetic effect in collisions of nuclei. The isobar collision species alternated frequently between $_{44}^{96}{\mathrm{Ru}}+_{44}^{96}{\mathrm{Ru}}$ and $_{40}^{96}{\mathrm{Zr}}+_{40}^{96}{\mathrm{Zr}}$ . In order to conduct blind analyses of studies related to the chiral magnetic effect in these isobar data, STAR developed a three-step blind analysis procedure. Analysts are initially provided a “reference sample” of data, comprised of a mix of events from the two species, the order of which respects time-dependent changes in run conditions. After tuning analysis codes and performing time-dependent quality assurance on the reference sample, analysts are provided a species-blind sample suitable for calculating efficiencies and corrections for individual $\approx 30$-min data-taking runs. For this sample, species-specific information is disguised, but individual output files contain data from a single isobar species. Only run-by-run corrections and code alteration subsequent to these corrections are allowed at this stage. Following these modifications, the “frozen” code is passed over the fully un-blind data, completing the blind analysis. As a check of the feasibility of the blind analysis procedure, analysts completed a “mock data challenge,” analyzing data from Au + Au collisions at $\sqrt{s_\text {NN}}=27$ GeV, collected in 2018. The Au + Au data were prepared in the same manner intended for the isobar blind data. Finally, the details of the blind analysis procedure and results from the mock data challenge are presented.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Isotopic evidence for a young lunar magma ocean

Herein, mare basalt sources and ferroan anorthosite suite cumulates define a linear array on a 146 Sm/ 144 Nd versus 142 Nd/ 144 Nd isochron plot demonstrating these materials were derived from a common reservoir at 4336 +31 / –32 Ma. The minimum proportion of the Moon that was in isotopic equilibrium at this time is estimated to be 1-3% of its entire volume based on the geographic extent from which the analyzed samples were collected and the calculated depths from which the samples were derived. Scenarios in which large portions of the Moon were molten to depths of many hundreds of kilometers are required to produce the observed Sm-Nd isotopic equilibrium between the mantle and crustal rocks at 4.34 Ga. This is a consequence of the fact that limited heating of a solid Moon above the blocking temperature of the Sm-Nd isotopic system is insufficient to diffusively homogenize radiogenic Nd throughout the mantle and crust. There are three scenarios that might account for global-scale isotopic equilibrium on the Moon relatively late in Solar System history including: (1) Sm-Nd re-equilibration of a solid Moon resulting from widespread melting in response to mantle overturn or a very large impact, (2) early accretion of the Moon followed by delayed cooling due to the presence of an additional heat source that kept a large portion of the Moon molten until 4.34 Ga, or (3) late accretion of the Moon followed by rapid cooling of the magma ocean late in Solar System history. Neither density-driven overturn of the mantle, nor a large impact, are likely to homogenize the mantle and crust to the extent required by the Sm-Nd isochron. Likewise, secondary heating mechanisms, such as tidal heating or radioactive decay, are not efficient enough to keep the Moon molten to the depth of the mare basalt source regions for many tens to hundreds of millions of years. Instead, the age of equilibrium between such a compositionally diverse set of rocks, produced on a global scale, likely records the time of primordial solidification of the Moon from a magma ocean. This scenario accounts for both the petrogenetic characteristics of lunar rock suites, as well as their Sm-Nd isotopic systematics. It is supported by the preponderance of ~4.35 Ga ages obtained for other hypothetical magma ocean crystallization products, such as ferroan anorthosite suite rocks and K, REE, and P enriched cumulates that are thought to represent flotation cumulates of the magma ocean and the last vestiges of magma ocean solidification, respectively.

79 ASTRONOMY AND ASTROPHYSICS↗

AtomicJ: An open source software for analysis of force curves

We present an open source Java application for analysis of force curves and images recorded with the Atomic Force Microscope. AtomicJ supports a wide range of contact mechanics models and implements procedures that reduce the influence of deviations from the contact model. It generates maps of mechanical properties, including maps of Young's modulus, adhesion force, and sample height. It can also calculate stacks, which reveal how sample's response to deformation changes with indentation depth. AtomicJ analyzes force curves concurrently on multiple threads, which allows for high speed of analysis. It runs on all popular operating systems, including Windows, Linux, and Macintosh.

42 ENGINEERING↗

Microbial Monitoring of Astromaterials Curation Labs Reveals Inter-Lab Diversity

The Astromaterials Curation Division at NASA’s Johnson Space Center houses seven sample collections stored in separate clean rooms to avoid cross-contamination. Prior to receiving new sample collections from carbon rich asteroids, we instituted a monitoring program to characterize the microbial ecology of these labs and to understand how organisms could interact with and potentially contaminate current and future collections. Methods: Beginning in Oct. 2017 we sampled the Meteorite (ISO 7 equivalent) and Pristine Lunar (ISO 5 equivalent) labs on a monthly basis. Surface samples were collected using dry swabs. Air samples were collected using an impactor style air sampler. Cultivable organisms were identified and characterized. Aliquots of each sample were also preserved for DNA sequencing. For each sampling event recovery rate was calculated as the percentage of samples showing microbial growth1. Fungal colonies were selected for amino acid extraction and analysis via Ultra- Performance Liquid Chromatography with Fluorescence Detection and Mass Spectrometry.

Regberg, A. B.↗

Thermal effects on neutrino-nucleus inelastic scattering in stellar environments

Thermal effects for inelastic neutrino-nucleus scattering off even-even nuclei in the iron region are studied. Allowed and first-forbidden contributions to the cross sections are calculated within the quasiparticle random-phase approximation, extended to finite temperatures within the Thermo-Field-Dynamics formalism. The GT{sub 0} strength distribution at finite temperatures is calculated for the sample nucleus {sup 54}Fe. The neutral-current neutrino-nucleus inelastic cross section is calculated for relevant temperatures during the supernova core collapse. The thermal population of the excited states significantly enhances the cross section at low neutrino energies. In agreement with studies using a large scale shell-model approach the enhancement is mainly due to neutrino up-scattering at finite temperatures.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Evidence Theory Representations for Loss of Assured Safety in Weak Link/Strong Link Systems.

The following topics are considered in this presentation: (i) Overview of evidence theory, (ii) Representation of loss of assured safety (LOAS) with evidence theory for a 1 SL, 1 WL system, (iii) Description of 2 SLs and 1 WL used for illustration, (iv) Plausibility and belief for LOAS and associated sampling-based verification calculations for a 2 SL, 1 WL system, (iv) Plausibility and belief for margins associated with LOAS for a 2 SL, 1 WL system, (v) Plausibility and belief for LOAS for a 2 SL, 2 WL system, (vi) Incorporation of evidence spaces for link temperature curves into LOAS calculations, (vii) Plausibility and belief for LOAS for WL/SL systems with SL subsystems, and (viii) Sampling-based procedures for the estimation of plausibility and belief. 2

42 ENGINEERING↗

On the incident solar radiation in CMIP5 models

Abstract Annual incident solar radiation at the top of atmosphere should be independent of longitudes. However, in many Coupled Model Intercomparison Project phase 5 (CMIP5) models, we find that the incident radiation exhibited zonal oscillations, with up to 30 W/m 2 of spurious variations. This feature can affect the interpretation of regional climate and diurnal variation of CMIP5 results. This oscillation is also found in the Community Earth System Model. We show that this feature is caused by temporal sampling errors in the calculation of the solar zenith angle. The sampling error can cause zonal oscillations of surface clear‐sky net shortwave radiation of about 3 W/m 2 when an hourly radiation time step is used and 24 W/m 2 when a 3 h radiation time step is used.

Zhou, Linjiong↗