Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SORPTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Sorption and Oxidative Degradation of Small Organic Molecules on Mn-Oxides-Effects of pH and Mineral Structures

Manganese (Mn)-oxides regulate carbon (C) cycling in soils by sorbing and oxidizing organic compounds. The composition of soil organic matter varies widely, and little is known about the reactivity of individual organic compounds with structurally diverse Mn-oxides under various environmentally relevant pH conditions. Here, in this study, we examined the affinity of six organic compounds for three Mn-oxides, comprised of layer (birnessite and hydrous Mn oxide HMO) or tunnel (cryptomelane) structures, at acidic (pH 4), slightly acidic (pH 6), and slightly alkaline (pH 8) conditions. Cryptomelane, with a higher specific surface area and point of zero charge, showed higher reactivity than that of HMO and birnessite. Interestingly, these Mn-oxides, although different in structures, decomposed each organic compound to form the same products. Citrate, pyruvate, ascorbate, and catechol induced reduction and dissolution of Mn-oxides. After the reaction, the average oxidation state of Mn in the solids was much lower at pH 4 than at pH 6 and 8, suggesting more reduction under more acidic conditions. Even when reacting with phthalate and propanol, which only sorbed to Mn-oxides but did not degrade, there was proton-promoted Mn dissolution under acidic conditions. These results suggest the significance of environmental pH and mineral structures in affecting the Mn–organic interactions and provide fundamental insights into a better understanding of the roles of Mn-oxides in regulating soil C cycling.

58 GEOSCIENCES↗

Sb(III) and Sb(V) Sorption onto Al-Rich Phases: Hydrous Al Oxide and the Clay Minerals Kaolinite KGa-1b and Oxidized and Reduced Nontronite NAu-1

We have studied the immobilization of Sb(III) and Sb(V) by Al-rich phases - hydrous Al oxide (HAO), kaolinite (KGa-1b), and oxidized and reduced nontronite (NAu-1) - using batch experiments to determine the uptake capacity and the kinetics of adsorption and Extended X-ray Absorption Fine Structure (EXAFS) Spectroscopy to characterize the molecular environment of adsorbed Sb. Both Sb(III) and Sb(V) are adsorbed in an inner-sphere mode on the surfaces of the studied substrates. The observed adsorption geometry is mostly bidentate corner-sharing, with some monodentate complexes. The kinetics of adsorption is relatively slow (on the order of days), and equilibrium adsorption isotherms are best fit using the Freundlich model. The oxidation state of the structural Fe within nontronite affects the adsorption capacity: if the clay is reduced, the adsorption capacity of Sb(III) is slightly decreased, while Sb(V) uptake is increased significantly. This may be a result of the presence of dissolved Fe(II) in the reduced nontronite suspensions or associated with the structural rearrangements in nontronite due to reduction. These research findings indicate that Sb can be effectively immobilized by Al-rich phases. The increase in Sb(V) uptake in response to reducing structural Fe in clay can be important in natural settings since Fe-rich clays commonly go through oxidation-reduction cycles in response to changing redox conditions.

54 ENVIRONMENTAL SCIENCES↗

Anionic Gallium-Based Metal;#8722;Organic Framework and Its Sorption and Ion-Exchange Properties

A gallium-based metal-organic framework Ga{sub 6}(C{sub 9}H{sub 3}O{sub 6}){sub 8} {center_dot} (C{sub 2}H{sub 8}N){sub 6}(C{sub 3}H{sub 7}NO){sub 3}(H{sub 2}O){sub 26} [1, Ga{sub 6}(1,3,5-BTC){sub 8} {center_dot} 6DMA {center_dot} 3DMF {center_dot} 26H{sub 2}O], GaMOF-1; BTC = benzenetricarboxylate/trimesic acid and DMA = dimethylamine, with space group I{bar 4}3d, a = 19.611(1) {angstrom}, and V = 7953.4(6) {angstrom}{sup 3}, was synthesized using solvothermal techniques and characterized by synchrotron-based X-ray microcrystal diffraction. Compound 1 contains isolated gallium tetrahedra connected by the organic linker (BTC) forming a 3,4-connected anionic porous network. Disordered positively charged ions and solvent molecules are present in the pore, compensating for the negative charge of the framework. These positively charged molecules could be exchanged with alkali-metal ions, as is evident by an ICP-MS study. The H{sub 2} storage capacity of the parent framework is moderate with a H{sub 2} storage capacity of {approx}0.5 wt % at 77 K and 1 atm.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigation of surface structures by powder diffraction : a differential pair distribution function study on arsenate sorption on ferrihydrite.

Differential pair distribution function (d-PDF) analysis of high energy powder X-ray diffraction data was carried out on 2-line ferrihydrite nanoparticles with arsenate oxyanions adsorbed on the surface to investigate the binding mechanism. In this analysis, a PDF of ferrihydrite is subtracted from a PDF of ferrihydrite with arsenate sorbed on the surface, leaving only correlations from within the surface layer and between the surface and the particle. As-O and As-Fe correlations were observed at 1.68 and 3.29 {angstrom}, respectively, in good agreement with previously published EXAFS data, confirming a bidentate binuclear binding mechanism. Further peaks are observed in the d-PDF which are not present in EXAFS, corresponding to correlations between As and O in the particle and As-2nd Fe.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Growth of microscopic cones on titanium cathodes of sputter-ion pumps driven by sorption of large argon quantities

Microscopic cones have been observed on titanium cathodes of sputter-ion pumps (SIPs) after pump operation. The cones were studied by means of scanning electron microscopy and energy dispersive x-ray analysis. Size and morphology of these cones are clearly correlated with the nature and the relative amount of each gas species pumped by each SIP during its working life. In particular, their growth was found to be fed by sputtering mechanisms, mostly during Ar pumping, and to be driven by the electromagnetic field applied to the Penning cells of each SIP. Experimental findings suggest that the formation and extent of such conic structures on cathode surfaces might play a leading role in the onset of phenomena typically related to the functioning of SIPs, e.g., the so-called argon instability.

36 MATERIALS SCIENCE↗

STRONTIUM AND ACTINIDE SORPTION BY MST AND MMST UNDER CONDITIONS REVELANT TO THE SMALL COLUMN ION-EXCHANGE PROCESS

A series of tests were performed to examine the kinetics of Sr and actinide removal by monosodium titanate (MST) and modified monosodium titanate (mMST) under mixing conditions similar to what will be provided in the Small Column Ion Exchange (SCIX) Program. Similar removal kinetics were seen for two different mixing energies, indicating that under these conditions bulk solution transport is not the rate limiting step for Sr and actinide removal. Sr removal was found to be rapid for both MST and mMST, reaching steady-state conditions within six hours. In contrast, at least six weeks is necessary to reach steady-state conditions for Pu with MST. For mMST, steady-state conditions for Pu were achieved within two weeks. The actual contact time required for the SCIX process will depend on starting sorbate concentrations as well as the requirements for the decontaminated salt solution. During testing leaks occurred in both the MST and mMST tests and evidence of potential desorption was observed. The desorption likely occurred as a result of the change in solids to liquid phase ratio that occurred due to the loss of solution. Based on these results, Savannah River National Laboratory (SRNL) recommended additional testing to further study the effect of changing phase ratios on desorption. This testing is currently in progress and results will be documented in a separate report.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

ESTIMATED NEPTUNIUM SEDIMENT SORPTION VALUES AS A FUNCTION OF PH AND MEASURED BARIUM AND RADIUM KD VALUES

The objective of this document is to provide traceability and justification for a select few new geochemical data used in the Special Analysis entitled 'Special Analysis for the Dose Assessment of the Final Inventories in Center Slit Trenches One through Five'. Most values used in the Special Analysis came from the traditional geochemical data package, however, some recent laboratory measurements have made it possible to estimate barium K{sub d} values. Additionally, some recent calculations were made to estimate neptunium K{sub d} values as a function of pH. The assumptions, justifications, and calculations needed to generate these new values are presented in this document, and the values are summarized.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE Hydrogen Sorption Center of Excellence: Synthesis and Processing of Single-Walled Carbon Nanohorns for Hydrogen Storage and Catalyst Supports

The objective of the project was to exploit the unique morphology, tunable porosity and excellent metal supportability of single-walled carbon nanohorns (SWNHs) to optimize hydrogen uptake and binding energy through an understanding of metal-carbon interactions and nanoscale confinement. SWNHs provided a unique material to understand these effects because they are carbon nanomaterials which are synthesized from the 'bottom-up' with well-defined, sub-nm pores and consist of single-layer graphene, rolled up into closed, conical, horn-shaped units which form ball-shaped aggregates of {approx}100-nm diameter. SWNHs were synthesized without metal catalysts by the high-temperature vaporization of solid carbon, so they can be used to explore metal-free hydrogen storage. However, SWNHs can also be decorated with metal nanoparticles or coatings in post-processing treatments to understand how metals augment hydrogen storage. The project first explored how the synthesis and processing of SWNHs could be modified to tailor pore sizes to optimal size ranges. Nanohorns were rapidly synthesized at 20g/hr rates by high-power laser vaporization enabling studies such as neutron scattering with gram quantities. Diagnostics of the synthesis process including high-speed videography, fast pyrometry of the graphite target, and differential mobility analysis monitoring of particle size distributions were applied in this project to provide in situ process control of SWNH morphology, and to understand the conditions for different pore sizes. We conclude that the high-temperature carbon-vaporization process to synthesize SWNHs is scalable, and can be performed by electric arc or other similar techniques as economically as carbon can be vaporized. However, the laser vaporization approach was utilized in this project to permit the precise tuning of the synthesis process through adjustment of the laser pulse width and repetition rate. A result of this processing control in the project was to eliminate the large (2-3 nm) internal pores of typical SWNHs which were found not to store hydrogen effectively. Post processing treatments of the as-synthesized SWNHs focused on pore size, surface area, and metal decoration in order to understand the effects of each on measured hydrogen uptake. Wet chemistry and gas-phase oxidation treatments were developed throughout the life of the project to adjust the interstitial and slit pore sizes of the as-produced SWNHs, and increase the surface area to a maximum value of 2200 m2/g. In addition, wet chemistry approaches were used to develop methods to decorate the nanohorns with small Pt and Pd nanoparticles for metal-assisted hydrogen storage. Finally, oxygen-free decoration of SWNHs with alkaline earth metals (Ca) was developed using pulsed laser deposition and vacuum evaporation in order to produce surface coatings with high static electric fields sufficient to polarize and bind dihydrogen. Decoration of SWNHs with Pt and Pd nanoparticles resulted in enhanced binding energy (NREL, 36 kJ/mol), as well as enhancement in the room temperature uptake of 0.6 wt.% (for undecorated, oxidized, pure-C SWNHs at 20 bar), to 1.6 wt% for Pt- and Pd-decorated SWNHs at 100 bar, comparable to MOF-177 materials. NIST neutron scattering on gram quantity Pt- and Pd-decorated SWNHs showed clear evidence for 'spillover' type losses of molecular hydrogen and determined the onset temperature for this effect to be between 150K < T < 298K.High (2142 m2/g) surface area SWNH materials with variable pore sizes and metal-decorated SWNHs were demonstrated with metals (Pt, Pd) resulting in increased excess storage (3.5 wt. % at 77K). Compression results in bulk SWNH samples with density 1.03 g/cm3, and 30 g/L volumetric capacity. In summary, SWNHs were found to be unique carbon nanomaterials which can be produced continuously at high rates from vaporization of pure carbon. Their inherent pore structure exhibits significant room temperature hydrogen storage in sub-nm pores, and their morphology serves as an excellent metal catalyst support for small (2-3 nm nanoparticles). Pt- and Pd-nanoparticle-decorated SWNHs exhibit clear evidence for metal-assisted hydrogen storage which is activated at T>150 K, permitting additional room-temperature storage up to 1.8 wt.% at 100 bar. One of the key results of the project were theoretical predictions for doped, decorated, and filled nanostructures with distributed charge to maintain high static electric fields sufficient to polarize and bind hydrogen. This concept indicates a promising new direction for hydrogen storage materials.

08 HYDROGEN↗

Literature Review on the Sorption of Plutonium, Uranium, Neptunium, Americium and Technetium to Corrosion Products on Waste Tank Liners

The Savannah River Site (SRS) has conducted performance assessment (PA) calculations to determine the risk associated with closing liquid waste tanks. The PA estimates the risk associated with a number of scenarios, making various assumptions. Throughout all of these scenarios, it is assumed that the carbon-steel tank liners holding the liquid waste do not sorb the radionuclides. Tank liners have been shown to form corrosion products, such as Fe-oxyhydroxides (Wiersma and Subramanian 2002). Many corrosion products, including Fe-oxyhydroxides, at the high pH values of tank effluent, take on a very strong negative charge. Given that many radionuclides may have net positive charges, either as free ions or complexed species, it is expected that many radionuclides will sorb to corrosion products associated with tank liners.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Fluorinated Covalent Organic Frameworks: A Novel Pathway to Enhance Hydrogen Sorption and Control Isosteric Heats of Adsorption; HyMARC Seed Project Final Report

Organic framework materials, as a unique sub-class of carbon-based sorbents, have gained increasing attention for promising attributes toward gas storage. Calculations of the hydrogen capacity of optimized frameworks show potential to achieve greater than 60 g/L storage of hydrogen, placing metal-organic frameworks (MOFs) and COFs near the top of the class of porous materials. However, at the ensemble level, poor stacking creates a quasi-amorphous material with low structural integrity and low effective surface area. The chemical versatility of COFs allows for additional methods for producing long-range order that specifically target the inter-layer interactions in COFs but that leave key pore-accessible linker sites open. These modifications (either during synthesis or post-synthetic) enable a host of strategies to both improve crystalline order for more stable and higher surface, as well as add metals with open coordination for enhanced H 2 binding enthalpy.

08 HYDROGEN↗

Editorial: Sorption processes in nuclear waste management: data knowledge management and new methodologies for data acquisition/prediction

A fundamental approach to Nuclear Waste Repository research involves the collection of experimental data in a laboratory setting, development of empirical and/or mechanistic numerical models representing those observations, and application of these models (or Reduced Order Models) into reactive transport and performance assessment models as predictive tools for informing society of impacts and risks associated with nuclear waste repository scenarios (Stevens et al., 2020). Therefore, the assimilation and interpretation of experimental data must take advantage of both new data and the rich historical data available in the literature and apply novel modeling approaches to improve predictive tools, particularly from the standpoint of uncertainty quantification, for nuclear waste repository performance assessment (Zavarin et al., 2022).

sorption↗