Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “REFLECTIVITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Environmental responses of solar reflective surfaces

An assessment is undertaken of the environmental responses of solar reflective surfaces, with emphasis on dish-type concentrator surfaces exposed to the conditions of Southern California. A generalized mathematical model for specific solar reflective surfaces can be formulated on the basis of either experimental or assumed site degradation/corrosion data. In addition, the fabrication parameters of a parabolic reflecting surface and its substrate can be used to model combined reflective characteristics for the postulated environmental conditions.

Bouquet, F. L.↗
NASA NTRS1985

Remote sensing of cloud-top pressure using reflected solar radiation in the oxygen A-band

An algorithm has been developed for using the reflection of solar radiation in the oxygen A-band to determine cloud-top altitude. Because of multiple scattering and molecular absorption inside the cloud, the reflection of clouds is substantially modified in comparison with a mirror cloud, which is assumed to have a 100 percent reflection. To infer true cloud-top altitude, therefore, it is necessary to accurately estimate the amount of 'photon penetration'. Theoretical calculations indicate that the amount of photon penetration depends on the altitude, the scaled volume scattering coefficient, and the scaled optical thickness of the cloud. Algorithms using the reflection in the oxygen A-band to determine the cloud-top pressure have been applied to an aircraft field experiment in conjunction with CCOPE, 1981. Results of this study are very encouraging, especially for extended clouds.

Wu, M.-L. C.↗
NASA NTRS1985

Atmospheric and Science Complexity Effects on Surface Bidirectional Reflectance

Among the tools used in passive remote sensing of Earth resources in the visible and near-infrared spectral regions are measurements of spectral signature and bidirectional reflectance functions (BDRFs). Determination of surface properties using these observables is complicated by a number of factors, including: (1) mixing of surface components, such as soil and vegetation, (2) multiple reflections of radiation due to complex geometry, such as in crop canopies, and (3) atmospheric effects. In order to bridge the diversity in these different approaches, there is a need for a fundamental physical understanding of the influence of the various effects and a quantiative measure of their relative importance. In particular, we consider scene complexity effects using the example of reflection by vegetative surfaces. The interaction of sunlight with a crop canopy and interpretation of the spectral and angular dependence of the emergent radiation is basically a multidimensional radiative transfer problem. The complex canopy geometry, underlying soil cover, and presence of diffuse as well as collimated illumination will modify the reflectance characteristics of the canopy relative to those of the individual elements.

Diner, D. J.↗
NASA NTRS1985

The use of field radiometers in reflectance factor and atmospheric measurements

Multispectral radiometers have been designed especially for the measurement of the reflectance factor of ground features. Reflectance factor data obtained with the aid of these instruments are used as 'ground truth' for aircraft and satellite experiments. The data provide a basis for the verification of models which have been developed to describe the radiation environment of surfaces. The considered radiometers can also be employed for atmospheric measurements. In the present paper, equations are developed for a number of applications. Attention is given to the reflectance factor measurement in the field, an analysis of the reflectance factor error, scattered and direct irradiance measurements, and the measurement of the atmospheric extinction coefficient.

Che, N.↗
NASA NTRS1985

Grazing incidence reflection coefficients of rhodium, osmium, platinum, and gold from 50 to 300 A

Reflectance measurements were made of several metals illuminated from various angles with light at 14 wavelengths in the interval 46.5-283 A. The metals, Rh, Os, Pt and Au were deposited as 125 A films on a binding substrate through electron beam epitaxy. Measurements were made with a grazing incidence monochromator and a reflectometer. The data generally showed lowered reflectance with increasing angles of illumination and shorter wavelengths. The reflectance peak, however, was located at wavelengths of 100-160 A, particularly at large grazing incidences. The wavelengths correspond with the 5p to epsilon-d transition in all of the elements. Rh displayed the highest overall reflectance, and both Rh and Os were more efficient than Au or Pt.

Hettrick, M. C.↗
NASA NTRS1986

Effects of nitrogen fertilization on growth and reflectance characteristics of winter wheat

The use of remote sensing to determine seasonal changes in agronomic and spectral properties of winter wheat canopies with different levels of N fertilization is investigated. Field experiments were conducted at Purdue Agronomy Farm, West Lafayette, IN during the 1978-1979 and 1979-1980 growing season. Spectral reflectance, total leaf N concentration, leaf chlorophyll concentration, leaf are index (LAI), and fresh and dry phytomass are measured and analyzed. Three distinct wheat canopies are detected for the O, 60, and 120 kg N/ha levels of fertilization; it is observed that with an increase in N the reflectance in the visible, and middle IR wavelengths decrease, and the IR reflectance is increased. The canopies with 120 kg N/ha display the highest LAI, maintain green leaf area the longest, and increase in fresh and dry phytomass. The relationship between spectral and agronomic variables is examined; the effect of changing chlorophyll concentration and LAI on the reflectance is studied.

Hinzman, L. D.↗
NASA NTRS1986

Comparison of leaf and canopy reflectance of subarctic forests

Near-surface and aerial reflectance of foliage and canopies of subarctic forests were measured in central Alaska near Fairbanks. Bi-directional and hemispherical radiometric data were recorded over wavelengths ranging from 0.285 to 2.8 microns with emphasis on Landsat TM (Thematic Mapper) bands. Comparison of near-surface and aerial data indicates that the canopy of some species such as black spruce and aspen have reflectance values similar to their respective foliage. Other species such as birch have large differences. Canopy structure and understory vegetation appear to be the primary factors that control whether the reflectance of canopy and foliage are similar or different. The results suggest that radiation reflected from the canopy of some forest species will be close to laboratory measurements of foliage after atmospheric corrections.

Dean, K. G.↗
NASA NTRS1986

Oxidation-resistant reflective surfaces for solar dynamic power generation in near Earth orbit

Reflective surfaces for space station power generation systems are required to withstand the atomic oxygen-dominated environment of near Earth orbit. Thin films of platinum and rhodium, which are corrosion resistant reflective metals, have been deposited by ion beam sputter deposition onto various substrate materials. Solar reflectances were then measured as a function of time of exposure to a RF-generated air plasma. Similarly, various protective coating materials, including MgF2, SiO2, Al2O3, and Si3N4, were deposited onto silver-coated substrates and then exposed to the plasma. Analysis of the films both before and after exposure by both ESCA and Auger spectroscopy was also performed. The results indicate that Pt and Rh do not suffer any loss in reflectance over the duration of the tests. Also, each of the coating materials survived the plasma environment. The ESCA and Auger analyses are discussed as well.

Gulino, D. A.↗
NASA NTRS1987

Frequency selective reflection and transmission at a layer composed of a periodic dielectric

The feasibility of using a periodic dielectric layer, composed of alternating bars having dielectric constants epsilon sub 1 and epsilon sub 2, as a frequency selective subreflector in order to permit feed separation in large aperture reflecting antenna systems was examined. For oblique incidence, it is found that total transmission and total reflection can be obtained at different frequencies for proper choices of epsilon sub 1, epsilon 2, and the geometric parameters. The frequencies of total reflection and transmission can be estimated from wave phenomena occurring in a layer of uniform dielectric constant equal to the average for the periodic layers. About some of the frequencies of total transmission, the bandwidth for 90% transmission is found to be 40%. However, the bandwidth for 90% reflection is always found to be much narrower; the greatest value found being 2.5%.

Bertoni, Henry L.↗
NASA NTRS1987

Effect of an oxygen plasma on uncoated thin aluminum reflecting films

Thin aluminum films were considered for use as a reflective surface for solar collectors on orbiting solar dynamic power systems. A matter of concern is the durability of such reflective coatings against oxidative attack by highly reactive neutral atomic oxygen, which is the predominate chemical specie in low Earth orbit. Research to date was aimed at evaluating the protective merit of thin dielectric coatings over the aluminum or other reflective metals. However, an uncoated aluminum reflector may self-protect by virtue of the oxide formed from its exposed surface, which constitutes a physical barrier to further oxidation. This possibility was investigated, and an attempt was made to characterize the effects of atomic oxygen on thin Al films using photomicrographs, scanning electron microscopy, spectrophotometry, Auger analysis, and mass measurements. Data collected in a parallel effort is discussed for its comparative value. The results of the investigation of uncoated aluminum supported the self-protection hypothesis, and importantly, it was found that long term specular reflectance for uncoated aluminum exceeded that of Al and Ag reflectors with dielectric coatings.

Parsons, Roger L.↗
NASA NTRS1986

Determination of the optical thickness of clouds from reflected solar radiation measurements

A procedure is presented for inferring cloud optical thickness from reflected solar radiation measurements. Asymptotic expressions are defined for the reflection and transmission functions of optically thick atmospheres, noting that the reflection function sensitivity to cloud optical thickness is highest with minimal surface albedo. Attention is also given to the dependence of the optical thickness on the cloud asymmetry factor. Sample results are provided from several high altitude aircraft flights to determine the reflection function of clouds.

King, M. D.↗
NASA NTRS1986

Spectral reflectance relationships to leaf water stress

Spectral reflectance data were collected from detached snapbean leaves in the laboratory with a multiband radiometer. Four experiments were designed to study the spectral response resulting from changes in leaf cover, relative water content of leaves, and leaf water potential. Spectral regions included in the analysis were red (630-690 nm), NIR (760-900 nm), and mid-IR (2.08-2.35 microns). The red and mid-IR bands showed sensitivity to changes in both leaf cover and relative water content of leaves. The NIR was only highly sensitive to changes in leaf cover. Results provided evidence that mid-IR reflectance was governed primarily by leaf moisture content, although soil reflectance was an important factor when leaf cover was less than 100 percent. High correlations between leaf water potentials and reflectance were attributed to covariances with relative water content of leaves and leaf cover.

Ripple, William J.↗
NASA NTRS1985

Ion reflection, gyration, and dissipation at supercritical shocks

Topics on collisionless plasmas are discussed and include: (1) Ion reflection is the dominant ion dissipation mechanism at nearly perpendicular, supercritical shocks. (2) An increasing fraction of the ions incident on a supercritical shock is reflected as the Mach number increases. The actual fraction reflected can be predicted using the Rankine Hugoniot conservation relations. (3) The effective temperature associated with the dispersion in velocity space associated with ion reflection accounts for a large fraction of the temperature rise observed across supercritical, quasi perpendicular shocks.

Gosling, J. T.↗
NASA NTRS1987

On the spectral reflectance properties of materials exposed at the Viking landing sites

Bidirectional reflectances for the blue, green, and red channels were determined for 31 block and soil exposures imaged by the two Viking Lander Cameras on Mars and were calibrated to within 10 percent uncertainties. The observed variations in bidirectional reflectance in the visible and relative brightness in the IR could be best explained by varying degrees of oxidation and ferric iron crystallinity, while most block surfaces had reflectances consistent with thin to optically thick covers of palagonitic material. These results are consistent with the conclusion that blocks seen at both sites are mafic rocks coated to varying thicknesses with amorphous oxidized material. The differences observed in reflectance properties for common block surfaces and common soils imply that local weathering of blocks has not contributed significantly to the soil exposed at the landing sites.

Guinness, Edward A.↗
NASA NTRS1987

Effects of specularly reflected radiation on spacecraft temperatures and thermal gradients

This paper describes the effect that specularly reflected solar energy has upon the heating load imposed upon orbiting spacecraft. Because this reflection may increase the total heating by factors of two or three, it is important that it can be computed accurately. An efficient method for treating multiple reflections is given and demonstrated by computing the temperatures and thermal gradients in a reflecting spherical radiator.

Emery, A. F.↗
NASA NTRS1987

Plasma wave evidence for reflected ions in front of subcritical shocks - ISEE 1 and 2 observations

Plasma wave profiles of bow shock crossings at ion acoustic frequencies exhibit 'feet' or 'pedestals', just as magnetic field profiles do. These ion-acoustic feet, consisting of increases in ion wave amplitude over background, are observed in front of virtually all quasi-perpendicular shocks, regardless of Mach number, but are closely associated with magnetic feet and reflected ions circulating around the ambient upstream field at supercritical shocks. Observed gyroradii of the reflected ions have been found to be commensurate with the thicknesses of the magnetic feet, which consist of increases in average field magnitude just outside the main shock ramps in front of supercritical shocks. Estimated scale lengths (gyroradii) of reflected protons are proportional to the thicknesses of acoustic wave feet in all cases, indicating that such protons are probably universally present at subcritical as well as supercritical shocks, although the protons are observed only sporadically because of instrumental limitations. The mere presence or absence of reflected ions in front of a shock may therefore be an insufficient diagnostic of the shock's status with respect to criticality and ion dissipation.

Greenstadt, E. W.↗
NASA NTRS1987

Field calibration of reference reflectance panels

A procedure for calibrating reference reflectance panels using the sun as the radiation source and a pressed-polytetrafluoroethylene powder standard is described. The directional/directional reflectance factor and the directional/hemispheric reflectance factor are examined. Directional/directional voltage responses for pressed-halon are analyzed. Three painted BaSO4 and one painted halon were calibrated using the proposed procedure. The effects of diffuse irradiance on reflectance-factor measurements are investigated. It is determined that the method has an accuracy on the order of 1 percent. The advantages and disadvantages of this method are discussed.

Jackson, Ray D.↗
NASA NTRS1987

Diffuse and specular characteristics of leaf reflectance

In this paper, the evolution of current understanding of the mechanisms of leaf reflectance is reviewed. The use of measurements of polarized reflectance to separate leaf reflectance into diffuse and specular components is discussed. A section on the factors influencing leaf reflectance - leaf structure and physiological disturbances - is included along with discussion on the manner in which these influences are manifested.

Grant, Lois↗