Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “REACTOR VESSELS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Effects of proton irradiation on nanocluster precipitation in ferritic steel containing fcc alloying additions

Newly-developed precipitate-strengthened ferritic steels with and without pre-existing nanoscale precipitates were irradiated with 4 MeV protons to a dose of ~5 mdpa at 50 C and subsequently examined by nanoindentation and atom probe tomography (APT). Irradiation-enhanced precipitation and coarsening of pre-existing nanoscale precipitates were observed. Copper partitions to the precipitate core along with a segregation of Ni, Al and Mn to the precipitate/matrix interface after both thermal aging and proton irradiation. Proton irradiation induces the precipitation reaction and coarsening of pre-existing nanoscale precipitates, and these results are similar to a thermal aging process. The precipitation and coarsening of nanoscale precipitates are responsible for the changes in hardness. The observation of the radiation-induced softening is essentially due to the coarsening of the pre-existing Cu-rich nanoscale precipitates. The implication of the precipitation on the embrittlement of reactor-pressure-vessel steels after irradiation is discussed.

Zhang, Zhongwu↗

NESC-VII: Fracture Mechanics Analyses of WPS Experiments on Large-scale Cruciform Specimen

This paper describes numerical analyses performed to simulate warm pre-stress (WPS) experiments conducted with large-scale cruciform specimens within the Network for Evaluation of Structural Components (NESC-VII) project. NESC-VII is a European cooperative action in support of WPS application in reactor pressure vessel (RPV) integrity assessment. The project aims in evaluation of the influence of WPS when assessing the structural integrity of RPVs. Advanced fracture mechanics models will be developed and performed to validate experiments concerning the effect of different WPS scenarios on RPV components. The Oak Ridge National Laboratory (ORNL), USA contributes to the Work Package-2 (Analyses of WPS experiments) within the NESCVII network. A series of WPS type experiments on large-scale cruciform specimens have been conducted at CEA Saclay, France, within the framework of NESC VII project. This paper first describes NESC-VII feasibility test analyses conducted at ORNL. Very good agreement was achieved between AREVA NP SAS and ORNL. Further analyses were conducted to evaluate the NESC-VII WPS tests conducted under Load-Cool-Transient- Fracture (LCTF) and Load-Cool-Fracture (LCF) conditions. This objective of this work is to provide a definitive quantification of WPS effects when assessing the structural integrity of reactor pressure vessels. This information will be utilized to further validate, refine, and improve the WPS models that are being used in probabilistic fracture mechanics computer codes now in use by the NRC staff in their effort to develop risk-informed updates to Title 10 of the U.S. Code of Federal Regulations (CFR), Part 50, Appendix G.

99 GENERAL AND MISCELLANEOUS↗

The Impact of Material and Design Criteria on the Assessment of Negligible Creep

Two of the proposed High Temperature Gas Reactors (HTGRs) under consideration for a demonstration plant have the design object of avoiding creep effects during normal operation. The goal of negligible creep could have different interpretations depending upon what failure modes are considered and associated criteria for avoiding the effects of creep. This work addresses the criteria for negligible creep in Subsection NH of Section III of the ASME B&PV Code, other international design codes and some currently suggested criteria modifications and their impact on permissible operating temperatures for various reactor pressure vessel materials. There are a number of other considerations for the selection of vessel material besides avoiding creep effects. Of particular interest for this review are (1) the material s allowable stress level and impact on wall thickness (the goal being to minimize required wall thickness) and (2) ASME Code approval (inclusion as a permitted material in the relevant Section and Subsection of interest) to expedite regulatory review and approval. The application of negligible creep criteria to two of the candidate materials, SA533 and Mod 9Cr-1Mo, and to a potential alternate, normalized and tempered 2 Cr-1Mo, are illustrated and the relative advantages and disadvantages are discussed.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Advanced Structural Materials and Cladding

Advanced nuclear energy systems, both fission- and fusion-based, aim to operate at higher temperatures and greater radiation exposure levels than experienced in current light water reactors. Additionally, they are envisioned to operate in coolants such as helium and sodium that allow for higher operating temperatures. Because of these unique environments, different requirements and challenges are presented for both structural materials and fuel cladding. For core and cladding applications in intermediate-temperature reactors (400-650 C), the primary candidates are 9-12Cr ferritic-martensitic steels (where the numbers represent the weight percentage of Cr in the material, i.e., 9-12 wt%) and advanced austenitic steels, adapted to maximize high temperature strength without compromising lower temperature toughness. For very high temperature reactors (>650 C), strength and oxidation resistance are more critical. In such conditions, high-temperature metals as well as ceramics and ceramic composites are candidates. For all advanced systems operating at high pressures, performance of the pressure boundary materials (i.e., those components responsible for containing the high-pressure liquids or gases that cool the reactor) is critical to reactor safety. For some reactors, pressure vessels are anticipated to be significantly larger and thicker than those used in light water reactors. The properties through the entire thickness of these components, including the effects of radiation damage as a function of damage rate, are important. For all of these advanced systems, optimizing the microstructures of candidate materials will allow for improved radiation and high-temperature performance in nuclear applications, and advanced modeling tools provide a basis for developing optimized microstructures.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Infrastructure development for radioactive materials at the NSLS-II

The X-ray Powder Diffraction (XPD) Beamline at the National Synchrotron Light Source-II is a multipurpose instrument designed for high-resolution, high-energy X-ray scattering techniques. In this article, the capabilities, opportunities and recent developments in the characterization of radioactive materials at XPD are described. The overarching goal of this work is to provide researchers access to advanced synchrotron techniques suited to the structural characterization of materials for advanced nuclear energy systems. XPD is a new beamline providing high photon flux for X-ray Diffraction, Pair Distribution Function analysis and Small Angle X-ray Scattering. The infrastructure and software described here extend the existing capabilities at XPD to accommodate radioactive materials. Such techniques will contribute crucial information to the characterization and quantification of advanced materials for nuclear energy applications. We describe the automated radioactive sample collection capabilities and recent X-ray Diffraction and Small Angle X-ray Scattering results from neutron irradiated reactor pressure vessel steels and oxide dispersion strengthened steels.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Overview of the Westinghouse Small Modular Reactor building layout

The Westinghouse Small Modular Reactor (SMR) is an 800 MWt (>225 MWe) integral pressurized water reactor (iPWR), in which all of the components typically associated with the nuclear steam supply system (NSSS) of a nuclear power plant are incorporated within a single reactor pressure vessel. This paper is the third in a series of four papers, which describe the design and functionality of the Westinghouse SMR. It focuses in particular upon the plant building layout and modular design of the Westinghouse SMR. In the development of small modular reactors, the building layout is an area where the safety of the plant can be improved by applying new design approaches. This paper will present an overview of the Westinghouse SMR building layout and indicate how the design features improve the safety and robustness of the plant. The Westinghouse SMR is designed with no shared systems between individual reactor units. The main buildings inside the security fence are the nuclear island, the rad-waste building, the annex building, and the turbine building. All safety related equipment is located in the nuclear island, which is a seismic class 1 building. To further enhance the safety and robustness of the design, the reactor, containment, and most of the safety related equipment are located below grade on the nuclear island. This reduces the possibility of severe damage from external threats or natural disasters. Two safety related ultimate heat sink (UHS) water tanks that are used for decay heat removal are located above grade, but are redundant and physically separated as far as possible for improved safety. The reactor and containment vessel are located below grade in the center of the nuclear island. The rad-waste and other radioactive systems are located on the bottom floors to limit the radiation exposure to personnel. The Westinghouse SMR safety trains are completely separated into four unconnected quadrants of the building, with access between quadrants only allowed above grade. This is an improvement to conventional reactor design since it prevents failures of multiple trains during floods or fires and other external events. The main control room is located below grade, with a remote shutdown room in a different quadrant. All defense in depth systems are placed on the nuclear island, primarily above grade, while the safety systems are located on lower floors. The economics of the Westinghouse SMR challenges the established approach of large Light Water Reactors (LWR) that utilized the economies of scale to reach economic competitiveness. To serve the market expectation of smaller capital investment and cost competitive energy, a modular design approach is implemented within the Westinghouse SMR. The Westinghouse SMR building layout integrates the three basic design constraints of modularization; transportation, handling and module-joining technology. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Mechanical and Chemical Properties of Harvested Hypalon Cable Jacket Subjected to Accelerated Thermal Aging

For nuclear power plants (NPPs) that are considering second license renewal for their operation beyond 60 years, knowledge of long-term operation, condition monitoring, and viability for the reactor components including reactor pressure vessel, concrete structures, and cable systems is essential. Such knowledge will provide NPPs with a game plan to predict performance and to estimate costs that are associated with monitoring or replacement programs for the affected systems. For cable systems that encompass a wide variety of materials, manufacturers, and in-plant location, accelerated aging of harvested cable jacket and insulation can provide insight as to remaining useful life and methods for monitoring. Accelerated thermal aging in air at temperatures between 80°C and 120°C was carried out on a multi-conductor control rod cable that had been in-service for over 30 years and was made by Boston Insulated Wire with Hypalon cable jacket and ethylene-propylene rubber insulation. From elongation at break (EAB) measurements and supporting Arrhenius analysis of the jacket material, an activation energy of 97.84 kJ/mol was estimated and the time to degradation, as represented by 50% EAB at the expected maximum operating temperature of 45°C, was estimated as consistent with 80 years. These values were slightly below previous measurements and could either be attributed to in-service degradation or variations in material properties from a given manufacturer. In addition, results from indenter modulus measurements and Fourier transform infrared spectroscopy suggest possible markers that could be beneficial to monitor cable conditions.

cable aging, cable insulation, Hypalon, second lic↗

The fast neutron fluence and the activation detector activity calculations using the effective source method and the adjoint function

This paper describes the application of effective source in forward calculations and the adjoint method to the solution of fast neutron fluence and activation detector activities in the reactor pressure vessel (RPV) and RPV cavity of a VVER-440 reactor. Its objective is the demonstration of both methods on a practical task. The effective source method applies the Boltzmann transport operator to time integrated source data in order to obtain neutron fluence and detector activities. By weighting the source data by time dependent decay of the detector activity, the result of the calculation is the detector activity. Alternatively, if the weighting is uniform with respect to time, the result is the fluence. The approach works because of the inherent linearity of radiation transport in non-multiplying time-invariant media. Integrated in this way, the source data are referred to as the effective source. The effective source in the forward calculations method thereby enables the analyst to replace numerous intensive transport calculations with a single transport calculation in which the time dependence and magnitude of the source are correctly represented. In this work, the effective source method has been expanded slightly in the following way: neutron source data were performed with few group method calculation using the active core calculation code MOBY-DICK. The follow-up neutron transport calculation was performed using the neutron transport code TORT to perform multigroup calculations. For comparison, an alternative method of calculation has been used based upon adjoint functions of the Boltzmann transport equation. Calculation of the three-dimensional (3-D) adjoint function for each required computational outcome has been obtained using the deterministic code TORT and the cross section library BGL440. Adjoint functions appropriate to the required fast neutron flux density and neutron reaction rates have been calculated for several significant points within the RPV and RPV cavity of the VVER-440 reacto rand located axially at the position of maximum power and at the position of the weld. Both of these methods (the effective source and the adjoint function) are briefly described in the present paper. The paper also describes their application to the solution of fast neutron fluence and detectors activities for the VVER-440 reactor. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Irradiation of ultrasonic sensors and adhesive couplants for application in light water reactor primary loop piping and components

The Electric Power Research Institute (EPRI) Nuclear Sector and US Department of Energy Light Water Reactor Sustainability Program are committed to engaging in research and development endeavors to address materials aging issues specific to long term operation of light water power reactors. To this effect, EPRI launched an industry initiative to develop nondestructive evaluation systems for online monitoring of existing cracks in light water reactor primary coolant loop piping and components. One of the goals of this initiative is to develop a sensor system (or systems) that can determine nondestructively if cracks are growing or arrested and, in the case of the former, to characterize their growth rates. A missing component of this initiative is an experimental assessment of how sensors and adhesive couplants will perform in service when exposed to chronic energetic neutron radiation, particularly at the primary coolant loop hot and cold leg dissimilar metal welds, which join the primary loop piping to the reactor pressure vessel and reside in the vicinity of the reactor core. The objective of this experimental study was to determine how ultrasonic transducers and adhesive couplants perform when exposed to irradiation in a test reactor to simulate and accelerate in-service exposure. Further, to achieve this objective, the signal stability of piezoelectric transducers and performance of adhesive couplants as a function of accumulated fast neutron fluence were characterized by collecting ultrasonic data in-situ during irradiation. Of particular interest were the ultrasonic signal quality and time decay of the amplitude of acoustic reflections as a function of fast neutron fluence. The results of the study showed that, of the 8 transducer/substrate sample assemblies tested, only 3 generated usable ultrasonic signals through the conclusion of the irradiation campaign. It was found that high temperature epoxy tends to ultrasonically couple the sensors to the substrates better than three types of refractory ceramic cements studied, as is supported by post irradiation examination. The results obtained through this experimental study will be utilized in the achievement of the overall goal of development of a sensor system to perform online monitoring of primary loop components.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Initial Results from the High Fluence UCSB ATR-2 Irradiation

A primary focus of the Department of Energy, Office of Nuclear Energy Light Water Reactor Sustainability Program (LWRSP) is the safe operation of nuclear reactors to extended lifetimes of up to 80 years. One of the primary reactor components of concern is the reactor pressure vessel (RPV), which is increasingly embrittled over time due to damage from high energy neutrons created in the reactor core. Radiation damage leads to the formation of nm-scale precipitates and solute-defect clusters, which result in an increase in the steel's ductile to brittle transition temperature. Transition temperature shifts (TTS) are used to quantify and regulate embrittlement. Extended life operation will subject some RPVs to higher neutron fluences than previously experienced by in-service vessels. Thus, robust prediction methods must be developed that ensure the safety of our nation's fleet of reactors. Current models underpredict embrittlement data from high flux test reactor irradiations at extended life fluences. It has been hypothesized that one reason for this underprediction is the formation of so-called 'Late- Blooming Phase' Mn-Ni-Si precipitates, which form and grow only at high fluence and that are currently not included in regulatory models. Recent research has demonstrated the existence of high volume fractions of intermetallic Mn-Ni-Si precipitate (MNSP) phases at high fluence and have generated significant insight into their character. However, a number of questions remain regarding MNSPs, such as: 1) what alloys are most susceptible to MNSP formation; 2) how is MNSP formation affected by flux (φ), fluence (φt) and irradiation temperature (T{sub irr}); and, 3) how to accurately predict TTS under extended life low flux service conditions? The fact that no two RPVs are exactly the same, both in terms of the steel composition and vessel service conditions, makes these questions particularly difficult to answer. Further, understanding the effect of flux differences between test reactor irradiations and in-vessel service is absolutely critical. Hence, physical models must be developed that predict TTS as a function of alloy solute content and vessel service conditions. A large-scale irradiation designed to develop and validate an extended life embrittlement prediction model was recently completed in the Advanced Test Reactor (ATR) at the Idaho National Laboratory as part of the DOE sponsored Nuclear Scientific User Facilities. This experiment, called the UCSB ATR-2 irradiation, is a collaboration between Oak Ridge National Lab (ORNL) and the University of California, Santa Barbara (UCSB) and is now primarily supported by the DOE Light Water Reactor Sustainability Program. The experiment is designed to investigate the single and combined effects of neutron φ, φt, T{sub irr} and alloy chemistry on precipitate formation, hardening and embrittlement. While postirradiation examinations (PIE) is ongoing, and is expected to take several years to complete, the first preliminary results are presented below. It should also be noted that Rolls-Royce has been a collaborator in UCSB ATR-2 from the start, and there are several other national and international institutions supporting the PIE. (authors)

36 MATERIALS SCIENCE↗

Light Water Reactor Sustainability Program: Grizzly Year-End Progress Report

The Grizzly software application is being developed under the Light Water Reactor Sustainability (LWRS) program to address aging and material degradation issues that could potentially become an obstacle to life extension of nuclear power plants beyond 60 years of operation. Grizzly is based on INL’s MOOSE multiphysics simulation environment, and can simultaneously solve a variety of tightly coupled physics equations, and is thus a very powerful and flexible tool with a wide range of potential applications. Grizzly, the development of which was begun during fiscal year (FY) 2012, is intended to address degradation in a variety of critical structures. The reactor pressure vessel (RPV) was chosen for an initial application of this software. Because it fulfills the critical roles of housing the reactor core and providing a barrier to the release of coolant, the RPV is clearly one of the most safety-critical components of a nuclear power plant. In addition, because of its cost, size and location in the plant, replacement of this component would be prohibitively expensive, so failure of the RPV to meet acceptance criteria would likely result in the shutting down of a nuclear power plant. The current practice used to perform engineering evaluations of the susceptibility of RPVs to fracture is to use the ASME Master Fracture Toughness Curve (ASME Code Case N-631 Section III). This is used in conjunction with empirically based models that describe the evolution of this curve due to embrittlement in terms of a transition temperature shift. These models are based on an extensive database of surveillance coupons that have been irradiated in operating nuclear power plants, but this data is limited to the lifetime of the current reactor fleet. This is an important limitation when considering life extension beyond 60 years. The currently available data cannot be extrapolated with confidence further out in time because there is a potential for additional damage mechanisms (i.e. late blooming phases) to become active later in life beyond the current operational experience. To develop a tool that can eventually serve a role in decision-making, it is clear that research and development must be perfomed at multiple scales. At the engineering scale, a multiphysics analysis code that can capture the thermomechanical response of the RPV under accident conditions, including detailed fracture mechanics evaluations of flaws with arbitrary geometry and orientation, is needed to assess whether the fracture toughness, as defined by the master curve, including the effects of embrittlement, is exceeded. At the atomistic scale, the fundamental mechanisms of degradation need to be understood, including the effects of that degradation on the relevant material properties. In addition, there is a need to better understand the mechanisms leading to the transition from ductile to brittle fracture through improved continuum mechanics modeling at the fracture coupon scale. Work is currently being conducted at all of these levels with the goal of creating a usable engineering tool informed by lower length-scale modeling. This report summarizes progress made in these efforts during FY 2013.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A BWR Fuel Assembly Concept with Partial Segregation of Fertile Material

Small modular reactors (SMRs) have been a hot topic in recent years due to their own set of advantages over conventional large light water reactors (LWRs). One of the driving forces for SMR development is the significant reduction in the up-front cost and enhanced inherent safety features. The reduced safety concerns are attributed to two main aspects, decay heat and source term. By taking the advantages of the two-phase flow driving head, which allows a much smaller and simpler reactor pressure vessel compared to the integral PWRs, a 50 MWe BWR-based SMR called the Novel Modular Reactor (NMR-50) is currently being developed at Purdue University. For this NMR-50, an optimized long-life core design was developed, which achieves a 10.2-year cycle length under current industrial practices and constraints. Due to the reduced operating power density, however, it was evident that there is a significant room to increase the fuel linear power. Therefore, core designs of partial segregation of fertile material within a fuel assembly (FA) were investigated to extend the fuel cycle length further. A heterogeneous fertile material loading (HFL) within a fuel assembly was developed based on the existing industry UO{sub 2} once-through fuel cycle option for the purpose of near-term deployment and maximum retrofitability. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Nuclear reactor support and seismic restraint with in-vessel core retention cooling features

A nuclear reactor including a lateral seismic restraint with a vertically oriented pin attached to the lower vessel head and a mating pin socket attached to the floor. Thermally insulating materials are disposed alongside the exterior surface of a lower portion of the reactor pressure vessel including at least the lower vessel head.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Nonlinear Ultrasonic Techniques to Monitor Radiation Damage in RPV and Internal Components

The objective of this research is to demonstrate that nonlinear ultrasonics (NLU) can be used to directly and quantitatively measure the remaining life in radiation damaged reactor pressure vessel (RPV) and internal components. Specific damage types to be monitored are irradiation embrittlement and irradiation assisted stress corrosion cracking (IASCC). Our vision is to develop a technique that allows operators to assess damage by making a limited number of NLU measurements in strategically selected critical reactor components during regularly scheduled outages. This measured data can then be used to determine the current condition of these key components, from which remaining useful life can be predicted. Methods to unambiguously characterize radiation related damage in reactor internals and RPVs remain elusive. NLU technology has demonstrated great potential to be used as a material sensor – a sensor that can continuously monitor a material’s damage state. The physical effect being monitored by NLU is the generation of higher harmonic frequencies in an initially monochromatic ultrasonic wave. The degree of nonlinearity is quantified with the acoustic nonlinearity parameter, β, which is an absolute, measurable material constant. Recent research has demonstrated that nonlinear ultrasound can be used to characterize material state and changes in microscale characteristics such as internal stress states, precipitate formation and dislocation densities. Radiation damage reduces the fracture toughness of RPV steels and internals, and can leave them susceptible to IASCC, which may in turn limit the lifetimes of some operating reactors. The ability to characterize radiation damage in the RPV and internals will enable nuclear operators to set operation time thresholds for vessels and prescribe and schedule replacement activities for core internals. Such a capability will allow a more clear definition of reactor safety margins. The research consists of three tasks: (1) materials sensing and monitoring; (2) physics-based materials and damage evolution modeling; and (3) remaining life estimation by integrating sensing, modeling and uncertainty.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Conformal core cooling and containment structure

A nuclear reactor includes a pressure vessel and a nuclear reactor core comprising fissile material disposed inside the pressure vessel at the bottom of the pressure vessel. A secondary core containment structure includes a containment basket comprising insulation with a maximum stable temperature of at least 2200K cladded by steel. The bottom of the pressure vessel and the nuclear reactor core are disposed inside the containment basket with the containment basket spaced apart from the bottom of the pressure vessel by a clearance gap. The containment basket may comprise zirconia insulation cladded by steel. In some embodiments the clearance gap between the containment basket and the bottom of the pressure vessel is no larger than one meter. The secondary core containment structure may further comprise conduits arranged to inject water into the clearance gap between the containment basket and the bottom of the pressure vessel.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Conformal core cooling and containment structure

A nuclear reactor includes a pressure vessel and a nuclear reactor core comprising fissile material disposed inside the pressure vessel at the bottom of the pressure vessel. A secondary core containment structure includes a containment basket comprising insulation with a maximum stable temperature of at least 2200K cladded by steel. The bottom of the pressure vessel and the nuclear reactor core are disposed inside the containment basket with the containment basket spaced apart from the bottom of the pressure vessel by a clearance gap. The containment basket may comprise zirconia insulation cladded by steel. In some embodiments the clearance gap between the containment basket and the bottom of the pressure vessel is no larger than one meter. The secondary core containment structure may further comprise conduits arranged to inject water into the clearance gap between the containment basket and the bottom of the pressure vessel.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Preliminary Primary System Thermal Fluids Analysis of a Horizontal Compact HTGR

The Horizontal Compact High Temperature Gas Reactor (HC-HTGR) is being designed by a multi-disciplinary team of nuclear, mechanical, and structural engineers, under the support of a DOE-NE Advanced Reactor Demonstration Program’s Advanced Reactor Concepts-20 (ARC-20) award. The objective of this ARC-20 project is to deliver a conceptual design for the proposed HC-HTGR in 3 years and support its commercialization as a safe, low-cost HTGR. Argonne National Laboratory (Argonne) is collaborating on the thermal hydraulic design and analysis of the HC-HTGR reactor pressure vessel internals. The scope of this work includes ensuring the reactor is able to maintain maximum core temperatures below designated safety thresholds during normal operation, shutdown, and accident conditions. This report documents the preliminary thermal hydraulic analysis of the HC-HTGR core design performed with a 1D fluid-3D solid coupled model built using the System Analysis Module (SAM). This assembly level model was utilized to inform the core assembly design, predict the temperature distribution in the peak power assembly including the peak fuel temperature, coolant channel outlet temperatures, and graphite temperature gradients. A key result of this analysis was the determination that the peak fuel temperature remains below the safety threshold of 1250°C. Additionally, this model was used to assess the assembly coolant channel and bypass flow mass flow rate distribution. Following the assembly level analysis, attention turned to the development of a full core reduced order model to be used to predict the core wide coolant flow distribution and to model certain operational and accidental transients.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Seismic fragility analysis for lateral supports of HTR-PM RPV - 18521

Since Fukushima accident, there has been increasing interest in China to study the risks of nuclear power plants under seismic events that are beyond the design basis. Two methodologies are commonly being adopted for this purpose, namely the seismic probabilistic risk assessment (SPRA) and the seismic margin assessment (SMA). Fragility analysis plays an important role as it not only provides fragility curves as input for the SPRA, but also can deduce HCLPF values for the SMA. In this paper, seismic fragilities of the lateral supports of the HTR-PM reactor pressure vessel (RPV) are studied. The lateral supports are crucial to the safety of HTR-PM RPV under seismic events. As they are located at a high elevation in the reactor building, it is expected they are one of the major contributors to the seismic risk of HTR-PM. The lateral supports are first briefly introduced in terms of structural features, load conditions and stress acceptance criteria in the engineering design. Their fragilities are then analyzed by identifying basic fragility analysis variables and determining values in terms of the median and standard deviations. The associated fragility curves are finally calculated and a HCLPF value is reported. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗