Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RAMAN SPECTRA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Characterization on RF magnetron sputtered niobium pentoxide thin films

Niobium pentoxide (Nb{sub 2}O{sub 5}) thin films with amorphous nature were deposited on microscopic glass substrates at 100°C by rf magnetron sputtering technique. The effect of rf power on the structural, morphological, optical, and vibrational properties of Nb{sub 2}O{sub 5} films have been investigated. Optical study shows the maximum average transmittance of about 87% and the optical energy band gap (indirect allowed) changes between 3.70 eV and 3.47 eV. AFM result indicates the smooth surface nature of the samples. Photoluminescence measurement showed the better optical quality of the deposited films. Raman spectra show the LO-TO splitting of Nb-O stretching of Nb{sub 2}O{sub 5} films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Analysis of surface potential and magnetic properties of Fe{sub 3}O{sub 4}/graphene oxide nanocomposites

Nanocomposite of magnetite/graphene oxide (Fe{sub 3}O{sub 4}/GO) has been synthesized by co-precipitation method. The phase formation of the magnetite nanoparticles (Fe{sub 3}O{sub 4} NPs) was confirmed by X-ray diffraction (XRD) analysis. Effect of Fe{sub 3}O{sub 4} NPs on the Raman spectra and on the surface potential of GO has been analyzed. Due to incorporation of NPs, change in the characteristic Raman peaks and also on the surface potential of GO is observed. Transmission electron microscopic (TEM) study has been carried out for surface morphology. Magnetic property measurement was carried out by using physical property measurement system (PPMS) at two different temperatures (30 K and 300 K).

77 NANOSCIENCE AND NANOTECHNOLOGY↗

XRD, Electron Microscopy and Vibrational Spectroscopy Characterization of Simulated SB6 HLW Glasses - 13028

Sample glasses have been made using SB6 high level waste (HLW) simulant (high in both Al and Fe) with 12 different frit compositions at a constant waste loading of 36 wt.%. As follows from X-ray diffraction (XRD) and optical and scanning electron microscopy (SEM) data, all the samples are composed of primarily glass and minor concentration of spinel phases which form both isometric grains and fine cubic (∼1 μm) crystals. Infrared spectroscopy (IR) spectra of all the glasses within the range of 400-1600 cm{sup -1} consist of the bands due to stretching and bending modes in silicon-oxygen, boron-oxygen, aluminum-oxygen and iron-oxygen structural groups. Raman spectra showed that for the spectra of all the glasses within the range of 850-1200 cm{sup -1} the best fit is achieved by suggestion of overlapping of three major components with maxima at 911-936 cm{sup -1}, 988-996 cm{sup -1} and 1020-1045 cm{sup -1}. The structural network is primarily composed of metasilicate chains and rings with embedded AlO{sub 4} and FeO{sub 4} tetrahedra. Major BO{sub 4} tetrahedra and BO{sub 3} triangles form complex borate units and are present as separate constituents. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Determining Eigenfrequencies and Homogeneous Widths of Lines of Intermolecular Vibrations in Water and in Aqueous Solutions of Hydrogen Peroxide Using Raman Spectroscopy

We have examined low-frequency Raman spectra of intermolecular vibrations of weak aqueous solutions of hydrogen peroxide and water. The differences between the observed Raman frequencies and the data from the literature on the IR-absorption frequencies of the same vibrations, as well as the interrelations between the frequencies and the widths of Lorentzian contours that approximate the vibrational spectra of the dynamic susceptibility, have been discussed. Based on a model of free damped vibrations of a classical oscillator with an inhomogeneous broadening, we have explained these effects for the first time. The homogeneous line widths and the damping times of the observed intermolecular vibrations have been determined. The eigenfrequencies of these vibrations have been calculated, and they have been shown to agree well with the data from the literature on the frequencies of IR absorption of water. We have shown that these parameters of intermolecular vibrations for water and for aqueous solutions of hydrogen peroxide differ from each other.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dielectric, magnetic, and lattice dynamics properties of Y-type hexaferrite Ba{sub 0.5}Sr{sub 1.5}Zn{sub 2}Fe{sub 12}O{sub 22}: Comparison of ceramics and single crystals

We prepared multiferroic Y-type hexaferrite Ba{sub 0.5}Sr{sub 1.5}Zn{sub 2}Fe{sub 12}O{sub 22} ceramics and compared their magnetic and dielectric properties with single crystal. Magnetic susceptibility and microwave resonance measurement revealed magnetic phase transition at T{sub C}=312 K, similar as in single crystal. Ferroelectric (FE) phase can be induced by external magnetic field in all investigated samples and the phase diagram in ceramics qualitatively resembles that of the single crystal. The range of magnetic fields, where the FE phase is induced, broadens after annealing of single crystal. Ceramics quenched after sintering exhibit several orders of magnitude lower conductivity than the single crystal. Heavily damped magnetic resonance was discovered in terahertz spectra at 10 K and its frequency softens below 5 GHz near T{sub C}. Number and symmetry of observed infrared (IR) and Raman active phonons correspond to paraelectric phase with D{sub 3d}{sup 5} hexagonal structure. No evidence for a structural phase transition was found in the IR and Raman spectra on cooling (in zero magnetic field) or in the room-temperature IR spectra with external static magnetic field up to 0.3 T.

36 MATERIALS SCIENCE↗

Preparation of Ag{sub 2}S-Graphene nanocomposite from a single source precursor and its surface-enhanced Raman scattering and photoluminescent activity

Ag{sub 2}S-Graphene nanocomposite was prepared via a relatively facile hydrothermal method, using a single-source molecular (silver diethyldithiocarbamate [Ag(DDTC)]) as precursor and graphene sheets as a support material. The composite was characterized by X-ray power diffraction, X-ray photoelectron spectroscopy, Field-emission scanning electron microscope, transmission electron microscopy, Fourier transform infrared, Raman spectra and fluorescence spectroscopy. The experimental results show that the Ag{sub 2}S-Graphene nanocomposite displays surface-enhanced Raman scattering (SERS) activity for graphene oxide and reveals relatively better fluorescence property compared with pure Ag{sub 2}S. Highlights: {yields} Ag{sub 2}S nanoparticles are deposited on graphene sheets via a single source precursor. {yields} Graphene oxide is reduced to graphene in the hydrothermal reaction process. {yields} Ag{sub 2}S-Graphene system displays surface-enhanced Raman scattering activity and relatively better fluorescence property.

36 MATERIALS SCIENCE↗

Enhancement of photoelectric catalytic activity of TiO{sub 2} film via Polyaniline hybridization

A Polyaniline (PANI)/TiO{sub 2} film coated on titanium foil was successfully prepared using the sol-gel method followed by a facile chemisorption. Compared with pristine TiO{sub 2}, the photocatalytic (PC) and photoelectrocatalytic (PEC) degradation rates of 2,4-dichlorophenol (2,4-DCP) with the PANI/TiO{sub 2} film were enhanced by 22.2% and 57.5%, respectively. 2,4-DCP can be mineralized more effectively in the presence of PANI/TiO{sub 2} film. The best PEC degradation efficiency of 2,4-DCP with the PANI/TiO{sub 2} film was acquired at an external potential of 1.5 V with a layer of 1 nm thick PANI. The PANI/TiO{sub 2} film was characterized by Raman spectra, Fourier transform infrared spectra (FT-IR), Auger electron spectroscopy (AES), and electrochemical analysis. These results indicated that there was a chemical interaction on the interface of PANI and TiO{sub 2}. This interaction may be of significance to promote the migration efficiency of carriers and induce a synergetic effect to enhance the PC and PEC activities. - Graphical abstract: The effect of PANI content on 2,4-DCP degradation with initial concentration of 50 mg/L, external potential=1.5 V. Inset: degradation rate constants of various PANI/TiO{sub 2} films. Highlights: > Polyaniline/TiO{sub 2} film was prepared using the sol-gel method followed by chemisorption. > Photoelectrocatalytic degradation rate of 2,4-dichlorophenol was enhanced by 57.5%. > The modification of Polyaniline to TiO{sub 2} film caused a rapid charge separation. > Best degradation efficiency was acquired at 1.5 V with 1 nm thick PANI.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fabrication of nanocrystalline silicon layers by plasma enhanced chemical vapor deposition from silicon tetrafluoride

The data on fabrication of silicon layers on various substrates by plasma enhanced chemical vapor deposition from the (silicon tetrafluoride)-hydrogen system are reported. The emission spectra of the plasma in the system are recorded. The samples were studied by the X-ray diffraction and secondary ion mass spectrometry techniques. The morphologic properties of the surface are examined, and the Raman spectra, the transmittance spectra in the infrared region, and photoluminescence spectra are recorded. The phase composition of the layers corresponds to nanocrystalline silicon, in which the dimensions of coherent-scattering grains vary with the conditions of the preparation process in the range from 3 to 9 nm. The layers exhibit intense photoluminescence at room temperature.

36 MATERIALS SCIENCE↗

Plasmon–phonon coupling in monolayer WS{sub 2}

The excitation of plasmon in metallic nanostructures produces intense and strongly localized near fields that enhance light-matter interaction. Here, we report plasmon–phonon coupling in monolayer WS{sub 2} deposited with gold and silver nanoparticles. The Raman spectra reveal phonon modes arising from the coupling between plasmon and WS{sub 2}. The localized surface plasmon resonance mediated excitation activates the Raman process without requiring defect for momentum conservation. Our results also reveal that the momentum induced by localized surface plasmon resonances losses to WS{sub 2} and the metal atoms adsorption modulated spin–orbit split are the two essential elements for the observed plasmon–phonon coupling. This work will open up exciting prospects for plasmon–phonon coupling in two dimensional systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Influence of UV and visible laser light on the structure and composition of layered organic - inorganic zinc and copper nanocomposites

The effect of UV and visible laser light on the structure and composition of layered organic-inorganic nanocomposites of transition metals, zinc [zinc hydroxide/dodecyl sulfate, Zn(OH){sub 2}DS] and copper [copper hydroxide/dodecyl sulfate, Cu{sub 2}(OH){sub 3}DS], has been experimentally investigated. Nanocomposites have been synthesised by laser ablation of targets from the aforementioned materials in aqueous solutions of a surfactant: sodium dodecyl sulfate (SDS). The absorption and Raman spectra of the thus obtained colloids are analysed. The structural composition and morphology of the solid phase isolated from the colloids are determined using X-ray diffraction, atomic-force microscopy, and scanning electron microscopy. It is shown that exposure of nanocomposites to UV and visible laser light with intensities in the range of 5 Multiplication-Sign 10{sup 5}-10{sup 7} W cm{sup -2} or higher leads to their fragmentation and change in their composition. (optical nanostructures)

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Anomalous phonon-mode dependence in polarized Raman spectroscopy of the topological Weyl semimetal TaP

Topological Weyl semimetals (WSMs) have attracted widespread interest due to the chiral Weyl fermions and surface Fermi arcs that enable unique optical and transport phenomena. In this work, we present angle-resolved Raman spectroscopy of TaP, a prototypical noncentrosymmetric WSM, for five excitation wavelengths ranging from 364 to 785 nm. The Raman-active modes, $A_1$, $B^1_1$, and $B^2_1$ modes, exhibit two main unique features beyond the conventional Raman theory. First, the relative intensities of Raman-active modes change as a function of the excitation wavelength. Second, angle-resolved polarized Raman spectra show systematic deviation from the Raman tensor theory. In particular, the $B^1_1$ mode is absent for 633-nm excitation, whereas the $B^2_1$ mode shows an unusual twofold symmetry instead of a fourfold symmetry for 488-, 532-, and 633-nm excitations. Finally, these unconventional phenomena are attributed to the interference effect in the Raman process owing to the existence of multiple carrier pockets with almost the same energy but different symmetries.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Si doping effects on (In,Ga)N nanowires

Si doped (In,Ga)N nanowires (In content up to 0.4) are grown on Si(111) substrates by plasma-assisted molecular beam epitaxy. By increasing the Si doping level, coalescence between nanowires is reduced and a more uniform morphology is obtained. The Raman spectra from highly doped samples show a characteristic broad band in the optical phonon frequency range, which became more prominent at higher doping levels. This Raman band can be explained by plasmon-phonon scattering from a free electron gas with strong wave-vector nonconservation, providing evidence for successful n-type doping. The measured plasmon-phonon modes are explained by lineshape simulations taking into account the simultaneous contribution of both the charge-density fluctuation and the impurity induced Fröhlich scattering mechanisms. The according lineshape analysis allows for an estimate of the carrier concentration.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Atomic configuration and charge state of hydrogen at dislocations in silicon

The effect of the introduction of hydrogen upon the vibration spectra and electrical characteristics of samples with dislocation networks at the interface of bonded silicon wafers was studied. In order to improve the sensitivity of measurements and to distinguish the signal from dislocation networks in Raman spectra, thin foils conventionally prepared for transmission electron microscopy were used as the sample under investigation. In the samples with dislocation networks, a Raman peak at 2000 cm{sup –1} was observed. This peak survived after annealing at a temperature of T = 500°C and was not observed in reference samples. Comparison of the experimental data with currently available theoretical calculations allowed one to attribute the observed peak to neutral hydrogen atoms H{sup 0} at the center of Si–Si bonds. The peak is metastable in the ideal lattice, but becomes stable in the vicinity of dislocations.

36 MATERIALS SCIENCE↗

Effect of Dy-substitution on the structural, vibrational, and multiferroic properties of BiFeO{sub 3} nanoparticles

Dysprosium (Dy) modified BiFeO{sub 3} [Bi{sub 1−x}Dy{sub x}FeO{sub 3} (x = 0.05, 0.10, and 0.15)] nanoparticles have been synthesized by a low temperature co-precipitation method. Rietveld analysis of X-ray diffraction data reveals a transformation from rhombohedral structure to orthorhombic structure with increase in the Dy concentration. From the transmission electron microscopy analysis, it is observed that the particle sizes of Bi{sub 1−x}Dy{sub x}FeO{sub 3} (x = 0.05, 0.10, and 0.15) nanoparticles range between 50–70, 40–50, and 30–50 nm, respectively. Raman spectra of Bi{sub 1−x}Dy{sub x}FeO{sub 3} (x = 0.05) belonging to rhombohedral (R3c) structure show 4A{sub 1} and 7E fundamental Raman modes in the range of 100–650 cm{sup −1} and two-phonon scattering modes such as 2A{sub 4} (longitudinal optical), 2E8 (transverse optical (TO)), and 2E{sub 9} (TO) in the range of 950–1270 cm{sup −1}. Suppression, broadening, and shifting of Raman modes have been observed with further increase in Dy concentration. The fundamental Raman modes of Bi{sub 1−x}Dy{sub x}FeO{sub 3} (x = 0.15) are assigned under orthorhombic (pnma) rather than rhombohedral (R3c) as the Rietveld analysis of X-ray diffraction data predicts a structural transformation for this particular composition. A complete suppression of two phonon modes has been noticed for this composition. An anomaly in the temperature dependent dielectric studies has been observed in all the samples at the vicinity of Neel temperature indicating a magnetic ordering, and an increase in magnetization with increase of Dy concentration in BiFeO{sub 3} is noticed from the room temperature magnetic studies. P–E hysteresis loop studies show a decrease of remnant polarization (P{sub r}) with the increase in Dy concentration and disappearance of hysteresis loop occurs for Bi{sub 1−x}Dy{sub x}FeO{sub 3} (x = 0.15) depicting a transformation from non-centrosymmetric (R3c) to centrosymmetric (Pnma) system.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Direct observation of heat dissipation in individual suspended carbon nanotubes using a two-laser technique

A two-laser technique is used to investigate heat spreading along individual single walled carbon nanotube (SWCNT) bundles in vacuum and air environments. A 532 nm laser focused on the center of a suspended SWCNT bundle is used as a local heat source, and a 633 nm laser is used to measure the spatial temperature profile along the SWCNT bundle by monitoring the G band downshifts in the Raman spectra. A constant temperature gradient is observed when the SWCNT bundle is irradiated in vacuum, giving direct evidence of diffusive transport of the phonons probed by the Raman laser. In air, however, we observe an exponentially decaying temperature profile with a decay length of about 7 {mu}m, due to heat dissipation from the SWCNT bundle to the surrounding gas molecules. The thermal conductivity of the suspended carbon nanotube (CNT) is determined from its electrical heating temperature profile as measured in vacuum and the nanotube bundle diameter measured via transmission electron microscopy. Based on the exponential decay curves measured in three different CNTs in air, the heat transfer coefficient between the SWCNTs and the surrounding air molecules is found to range from 1.5 x 10{sup 3} to 7.9 x 10{sup 4} W/m{sup 2} K, which is smaller than the 1 x 10{sup 5} W/m{sup 2} K thermal boundary conductance value calculated using the kinetic theory of gases. This measurement is insensitive to the thermal contact resistance, as no temperature drops occur at the ends of the nanotube. It is also insensitive to errors in the calibration of the G band temperature coefficient. The optical absorption is also obtained from these results and is on the order of 10{sup -5}.

36 MATERIALS SCIENCE↗

Transition from a nanocrystalline phase to an amorphous phase in In-Si-O thin films: The correlation between the microstructure and the optical properties

We investigated the structural and optical properties of In-Si-O thin films as the phase abruptly changes from nanocrystalline (nc) to amorphous (a) with increasing Si content. In-Si-O thin films were deposited on Si substrate using a co-sputtering deposition method. The RF power of the In{sub 2}O{sub 3} target was fixed at 100 W, while the power applied to the SiO{sub 2} target was varied between 0 W and 60 W. At the Si = 2.8 at. %, i.e., at the onset of amorphous phase, the optical properties, including the dielectric functions, optical gap energies, and phonon modes, changed abruptly which were triggered by changes in the crystallinity and surface morphology. X-ray diffraction (XRD) spectra showed crystalline (c-) In{sub 2}O{sub 3}-like peaks below Si = 2.2%. Additionally, a broad peak associated with an amorphous (a-) In{sub 2}O{sub 3} phase appeared above 2.8%. However, the Raman spectra of In-Si-O showed very weak peaks associated with c-In{sub 2}O{sub 3} below 2.2%, and then showed a strong Raman peak associated with a-In-Si-O above 2.8%. X-ray photoelectron spectroscopy measurements showed that oxygen vacancy-related peak intensities increased abruptly above Si = 2.8%. The contrasting results of XRD and Raman measurements can be explained as follows: first, the large enhancement in Drude tails in the a-In-Si-O phase was caused by Si-induced amorphization and a large increase in the density of oxygen vacancies in the In-Si-O thin films. Second, the apparently drastic increase of the Raman peak intensity near 364 cm{sup −1} (for amorphous phase, i.e., above Si = 2.8%) is attributed to a disorder-activated infrared mode caused by both the amorphization and the increase in the oxygen vacancy density in In-Si-O thin films.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Synthesis and characterization of CdS doped TiO{sub 2} nanocrystalline powder: A spectroscopic study

Graphical abstract: Raman spectra of TiO{sub 2} sample doped with 50% CdS and annealed at 600 °C. Highlights: ► Transformation from anatase to rutile is prohibited in doped TiO{sub 2}. ► FTIR study indicates that TiO{sub 2} lattice has been modified in the presence of CdS. ► Raman spectroscopy is found to be more sensitive as compared to XRD. -- Abstract: This report aimed to study the effect of CdS doping in TiO{sub 2} on the phase transformation of TiO{sub 2} from anatase to rutile using X-ray diffraction (XRD) and Raman spectroscopy. CdS-doped TiO{sub 2} nanocomposites have been prepared and characterized using Fourier transform infrared spectroscopy (FTIR) and transmission electron microscopy (TEM). We have observed that contrary to bare TiO{sub 2}, phase transformation of TiO{sub 2} from anatase to rutile is hindered when doped with CdS at high temperature. Raman spectroscopy is found to be more sensitive for detection of the surface of TiO{sub 2} as compared to XRD.

36 MATERIALS SCIENCE↗

Structural, optical and dielectric properties of Ce{sup 3+}, Pr{sup 3+}, Nd{sup 3+} doped LaF{sub 3} hexagonal nanoparticles

Well dispersed, elongated and hexagonal LaF{sub 3}: Ce{sup 3+}, Pr{sup 3+}, Nd{sup 3+} nanocrystals have been synthesized by microwave assisted technique. X-ray diffraction (XRD) studies indicates the formation of nanocrystals with unit cell parameters a = b = 7.144 A{sup 0}, c = 7.281 A{sup 0}, (c/a = 1.019) and unit cell volume of 321.86 (A{sup 0}){sup 3} of average crystallite size 21 nm have been traced by from XRD analysis and it is close agreement with transmission electron microscope (TEM) analysis. Ultra-violet (UV) absorption spectrum shows an edge at 250 nm indicating presence of wide transparency window region between 200 nm-800 nm. Fundamental groups have been observed in the Fourier transformation infrared (FTIR) and FT-Raman spectra. The blue luminescent properties of the nanoparticles were investigated by excitation and emission spectra. Room temperature Electrical and dielectric properties were studied for the synthesized nanocrystals the values of conductivity & resistivity is found to be in the order of 10{sup −6} Scm{sup −1} and resistivity 10{sup 5} Ω cm. Low dielectric constant value was observed in the LaF{sub 3}: Ce{sup 3+}, Pr{sup 3+}, and Nd{sup 3+} nanocrystals at high frequency indicating its suitability for electro optics applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗