Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Phase measurement”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Designing open quantum systems with known steady states: Davies generators and beyond

We provide a systematic framework for constructing generic models of nonequilibrium quantum dynamics with a target stationary (mixed) state. Our framework identifies (almost) all combinations of Hamiltonian and dissipative dynamics that relax to a steady state of interest, generalizing the Davies’ generator for dissipative relaxation at finite temperature to nonequilibrium dynamics targeting arbitrary stationary states. We focus on Gibbs states of stabilizer Hamiltonians, identifying local Lindbladians compatible therewith by constraining the rates of dissipative and unitary processes. Moreover, given terms in the Lindbladian not compatible with the target state, our formalism identifies the operations – including syndrome measurements and local feedback – one must apply to correct these errors. Our methods also reveal new models of quantum dynamics: for example, we provide a “measurement-induced phase transition” in which measurable two-point functions exhibit critical (power-law) scaling with distance at a critical ratio of the transverse field and rate of measurement and feedback. Time-reversal symmetry – defined naturally within our formalism – can be broken both in effectively classical and intrinsically quantum ways. Our framework provides a systematic starting point for exploring the landscape of dynamical universality classes in open quantum systems, as well as identifying new protocols for quantum error correction.

Guo, Jinkang [Department of Physics and Center for↗
NASA NTRS1993

On the determination of local instantaneous averages in particulate flow measurements

Determination of instantaneous local average particle density of a gas-particle suspension requires satisfying both the time scale relation and the volume scale relation or its continuum counter part of time averaging. This procedure was validated by comparing simultaneous velocity and mass flux measurements and the laser phase Doppler measurements.

Vandewall, R. E.↗
NASA NTRS1995

Near-infrared polarization in the bipolar outflow OH 0739-14

We present linear polarization observations of the bipolar outlfow source OH 0739-14 from 1.2 to 3.6 micrometers. The high levels of polarization (approximatly 47% in the bipolar lobes) and the angles of the vectors in the outflow lobes imply that the 1.2-3.6 micrometer polarization is due to single scattering by dust grains of light from the central source or from its immediate vicinity. Our polarization measurements, combined with phase-lag measurements of variability in the nebula by Kastner et al. (1992), tightly constrain the inclination angle i between the bipolar axis and the plane of the sky to be 35 deg less than or = i less than or = 37 deg. We observe the percentage polarization of the bipolar lobes to be constant with wavelength from 1.2 to 3.6 micrometers, which rules out any significant contribution by unpolarized emission, such as tiny grain emission, to the 3.6 micrometer emission. We propose to explain the K-L' color of the nebula as due to illumination by both the central star and by thermal emission from dust in a surrounding circumstellar shell with a dust temperature of 600-1000 K. Using this model, we find a relatively high minimum scattering optical depth at 3.75 micrometers of tau omega greater than 0.1. This is difficult to reconcile with Rayleigh scattering, which would then imply optically thick scattering at wavelengths of 1.2 and 1.65 micrometers, in constrast to the observations. We also find that the albedo of the grains at 3.75 micrometers and probably at 2.2 micrometers is higher than predicted for normal interstellar grains.

Shure, Mark↗
DOE OSTI2021

Measurement of chromatic aberrations using phase retrieval

We explore the feasibility of measuring chromatic aberrations using a technique based on phase retrieval, primarily for the purpose of diagnostics on the OMEGA EP laser. A computational model and optimization strategy is described, issues of numerical efficiency are addressed, and the potential limitations of the method are studied using mathematical analysis and Monte Carlo simulations. As a result, the algorithm performs well in simulation and yields encouraging results in a small-scale laboratory experiment.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Lightning and Radar Measures of Mixed-Phase Updraft Variability in Tracked Storms during the TRACER Field Campaign in Houston, Texas

Properties of 7488 thunderstorms are summarized for June–September 2022 during the Tracking Aerosol Convection Interactions Experiment (TRACER) field campaign Houston, Texas, using polarimetric weather radar and VHF 3D Lightning Mapping Array data. Automated tracking of storms linked each instrument’s measurements to a data-defined, time-evolving storm footprint. Within each storm, the depth and magnitude of episodic columns of radar differential reflectivity and specific differential phase quantified the prevalence of updrafts that activated mixed-phase precipitation pathways. Lightning measurements further distinguished the degree of rimed precipitation formation: the fraction of tracks with lightning varied from day to day and cells with lightning had stronger polarimetric columns. Track-level correlation of the lightning flash rate with radar polarimetric measures had substantial spread, showing that lightning provides an additional signal of mixed-phase precipitation processes that can complement future studies of thermodynamic and aerosol controls on cloud microphysics in the Houston region.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1990

Measurement of Allan variance and phase noise at fractions of a millihertz

Although the measurement of Allan variance of oscillators is well documented, there is a need for a simplified system for finding the degradation of phase noise and Allan variance step-by-step through a system. This article describes an instrumentation system for simultaneous measurement of additive phase noise and degradation in Allan variance through a transmitter system. Also included are measurements of a 20-kW X-band transmitter showing the effect of adding a pass tube regulator.

Conroy, Bruce L.↗
NASA NTRS1992

Measurements of the backscattering phase matrices of crystal clouds with a polarization lidar

A polarization technique based on measurements of intensities of the polarized I(parallel) and crosspolarized I(perpendicular) components of scattered radiation is often used in lidar studies of aerosols. The ratio I(perp)/I(para) is related to nonsphericity of scattering particles and it is often called, though unjustified, depolarization. Correct definition of the term has previously been shown to be the value d = 1 - P, where P is the degree of polarization defined in terms of the Stokes parameters. In fact, measurements of I(para) and I(perp) enable one to determine the Stokes parameter Q = I(para) - I(perp), and under the condition U = V = 0 the depolarization is determined by the relationship d = 2 x I(perp)/(I(para) + I(perp)). In 1988 a new cycle of measuring the Stokes parameters of lidar returns from scattering media irradiated with a linearly polarized light was started. Based on the lidar data obtained during the 1988-1990 period, a classification of scattering ensembles was made which reveals five types of the scattering particle ensembles differing by a combination of the Stokes parameters. In the 1990-1991 period, a cycle of measurements of the lidar returns' Stokes parameters was carried out using sounding radiation.

Kaul, B. V.↗
NASA NTRS1999

Measurement of Two-Phase Flow Characteristics Under Microgravity Conditions

This paper describes the technical approach and initial results of a test program for studying two-phase annular flow under the simulated microgravity conditions of KC-135 aircraft flights. A helical coil flow channel orientation was utilized in order to circumvent the restrictions normally associated with drop tower or aircraft flight tests with respect to two-phase flow, namely spatial restrictions preventing channel lengths of sufficient size to accurately measure pressure drops. Additionally, the helical coil geometry is of interest in itself, considering that operating in a microgravity environment vastly simplifies the two-phase flows occurring in coiled flow channels under 1-g conditions for virtually any orientation. Pressure drop measurements were made across four stainless steel coil test sections, having a range of inside tube diameters (0.95 to 1.9 cm), coil diameters (25 - 50 cm), and length-to-diameter ratios (380 - 720). High-speed video photographic flow observations were made in the transparent straight sections immediately preceding and following the coil test sections. A transparent coil of tygon tubing of 1.9 cm inside diameter was also used to obtain flow visualization information within the coil itself. Initial test data has been obtained from one set of KC-135 flight tests, along with benchmark ground tests. Preliminary results appear to indicate that accurate pressure drop data is obtainable using a helical coil geometry that may be related to straight channel flow behavior. Also, video photographic results appear to indicate that the observed slug-annular flow regime transitions agree quite reasonably with the Dukler microgravity map.

Keshock, E. G.↗
NASA NTRS1990

Information content of a single pass of phase-delay data from a short baseline connected element interferometer

An analytic development of the information array obtained with a single tracking pass of phase-delay measurements made from a short baseline interferometer is presented. Phase-delay observations can be made with great precision from two antennas using a single, common distributed frequency standard, hence the name connected element. With the information array, closed-form expressions are developed for the error covariance in declination and right ascension. These equations serve as useful tools for analyzing the relative merits of candidate station locations for connected element interferometry (CEI). The navigation performance of a short baseline interferometer located at the Deep Space Network's (DSN's) Goldstone intracomplex is compared with that which is presently achievable using Very Long Baseline Interferometry (VLBI) over intercontinental baselines. The performance of an intracomplex pair of short baselines formed by three stations is also investigated, along with the use of a single baseline in conjunction with conventional two-way Doppler data. The phase-delay measurement accuracy and data rate used in the analysis are based on the expected performance of an experimental connected element system presently under construction at Goldstone. The results indicate that the VLBI system that will be used during the Galileo mission can determine the declination and right ascension of a distant spacecraft to an accuracy of 20 to 25 nrad, while the CEI triad system and the combination of CEI-Doppler system are both capable of 30 to 70 nrad performance.

Thurman, S. W.↗
NASA NTRSDate not supplied

Measurement System Analysis of a Novel Phase-Based Ultrasonic NDE Technique for Bond Strength Measurement

Fiber reinforced polymer parts have shown tremendous benefits in aerospace structural applications, but their qualification and certification for use in safety critical areas are currently hindered by the lack of a capable non-destructive evaluation (NDE) method or technique for the inspection of these adhesively bonded parts. Conventional NDE methods and techniques typically detect gross bond defects in a qualitative (Pass/Fail) manner. These techniques struggle to detect weak or kissing bonds. Also, there are no widely adopted NDE methods or techniques for measuring interfacial bond strength or detecting kissing bonds. Bond strength is currently ensured by process control and semi-destructive testing. Results from recent research from other authors, including but not limited to mechanical testing, have shown an excellent correlation between interfacial stiffness of an adhesively bonded joint and the adhesive bond strength of that joint. In this paper, a measurement system analysis (MSA) of a novel phase-based ultrasonic NDE Technique, developed at NASA Langley Research Center, is presented for bond strength measurement to assess at an increased level the measurement process and identify components of variation in that measurement process.

Ultrasound↗
NASA NTRS2009

Colorimetric Solid Phase Extraction for the Measurement of Total I (Iodine, Iodide, and Triiodide) in Spacecraft Drinking Water

An experimental drinking water monitoring kit for the measurement of iodine and silver(I) was recently delivered to the International Space Station (ISS). The kit is based on Colorimetric Solid Phase Extraction (CSPE) technology, which measures the change in diffuse reflectance of indicator disks following exposure to a water sample. To satisfy additional spacecraft water monitoring requirements, CSPE has now been extended to encompass the measurement of total I (iodine, iodide, and triiodide) through the introduction of an oxidizing agent, which converts iodide and triiodide to iodine, for measurement using the same indicator disks currently being tested on ISS. These disks detect iodine, but are insensitive to iodide and triiodide. We report here the operational considerations, design, and ground-based performance of the CSPE method for total I. The results demonstrate that CSPE technology is poised to meet NASA's total I monitoring requirements.

Lipert, Robert J.↗
NASA NTRS1994

Measuring rainwater content by radar using propagation differential phase shift

While radars measure several quantities closely coupled to the rainfall rate, for frequencies less than 15 GHz, estimates of the rainwater content W are traditionally computed from the radar reflectivity factor Z or the rate of attenuation A--quantities only weakly related to W. Consequently, instantaneous point estimates of W using Z and A are often erroneous. A more natural, alternative parameter for estimating W at these frequencies is the specific polarization propagation differential phase shift phi(sub DP), which is a measure of the change in the difference between phases of vertically (V) and horizontally (H) polarized waves with increasing distance from a radar. It is now well known that W is nearly linearly related to phi(sub DP) divided by (1 - reversed R), where reversed R is the mass-weighted mean axis ratio of the raindrops. Unfortunately, such relations are not widely used in part because measurements of phi(sub DP) are scarce but also because one must determine reversed R. In this work it is shown that this parameter can be estimated using the differential reflectivity (Z(sub H)/Z(sub V) at 3 GHz. An alternative technique is suggested for higher frequencies when the differential reflectivity becomes degraded by attenuation. While theory indicates that it should be possible using phi(sub DP) to estimate W quite accurately, measurement errors increase the uncertainty to +/- 18%-35% depending on reversed R. While far from ideal, it appears that these estimates are likely to be considerably more accurate than those deduced using currently available methods.

Jameson, A. R.↗
NASA NTRS1972

Signal to noise measurement circuit

Phase lock reference provides a rapid and accurate method of determining the signal-to-noise ratio at the intermediate frequency stage of a receiver.

Deerkoski, L. F.↗
NASA NTRS1979

Plume Characterization of a One-Millipound Solid Teflon Pulsed Plasma Thruster, Phase 2

Measurements of the pulsed plasma thruster (PPT) plume upstream mass flux were made in the Molecular Sink (MOLSINK) vacuum facility in order to minimize the plume-tank wall reflected mass flux. Using specially designed collimators on 4 rows of Quartz Crystal Microbalanced (QCMs) mounted on a support extending radially away from the plume axis, measurements were made of the mass flux originating in a thin slice of the PPT primary plume at an arbitrary dip angle with respect to the thruster axis. The measured and analytically corrected mass flux from particles reflected from the MOLSINK walls was substracted from the collimated QCM measurements to improve their accuracy. These data were then analytically summed over dip angle to estimate the total plume backflow upstream of the thruster nozzle. The results indicate that the PPT backflow is of order 10 to the minus 10th power g/square cm/pulse in the region from 38 to 86 cm from the PPT axis in the nozzle exit plane. This flux drops with the square of the radial distance from the PPT axis and is comparable to the backflow of an 8 cm ion thruster, which has performance characteristics similar to those of the PPT.

Rudolph, L. K.↗